linux-kernel-mentees.lists.linuxfoundation.org archive mirror
 help / color / mirror / Atom feed
From: Vaibhav Gupta <vaibhavgupta40@gmail.com>
To: Bjorn Helgaas <helgaas@kernel.org>,
	Bjorn Helgaas <bhelgaas@google.com>,
	Bjorn Helgaas <bjorn@helgaas.com>,
	Adam Radford <aradford@gmail.com>,
	"James E.J. Bottomley" <jejb@linux.ibm.com>,
	"Martin K. Petersen" <martin.petersen@oracle.com>,
	Adaptec OEM Raid Solutions <aacraid@microsemi.com>,
	Hannes Reinecke <hare@suse.com>,
	Bradley Grove <linuxdrivers@attotech.com>,
	John Garry <john.garry@huawei.com>,
	Don Brace <don.brace@microsemi.com>,
	James Smart <james.smart@broadcom.com>,
	Dick Kennedy <dick.kennedy@broadcom.com>,
	Kashyap Desai <kashyap.desai@broadcom.com>,
	Sumit Saxena <sumit.saxena@broadcom.com>,
	Shivasharan S <shivasharan.srikanteshwara@broadcom.com>,
	Sathya Prakash <sathya.prakash@broadcom.com>,
	Sreekanth Reddy <sreekanth.reddy@broadcom.com>,
	Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com>,
	Jack Wang <jinpu.wang@cloud.ionos.com>,
	Vaibhav Gupta <vaibhav.varodek@gmail.com>
Cc: linux-scsi@vger.kernel.org,
	Vaibhav Gupta <vaibhavgupta40@gmail.com>,
	MPT-FusionLinux.pdl@broadcom.com, esc.storagedev@microsemi.com,
	linux-kernel@vger.kernel.org,
	linux-kernel-mentees@lists.linuxfoundation.org,
	megaraidlinux.pdl@broadcom.com
Subject: [Linux-kernel-mentees] [PATCH v1 09/15] scsi: lpfc: use generic power management
Date: Fri, 17 Jul 2020 12:04:32 +0530	[thread overview]
Message-ID: <20200717063438.175022-10-vaibhavgupta40@gmail.com> (raw)
In-Reply-To: <20200717063438.175022-1-vaibhavgupta40@gmail.com>

With legacy PM, drivers themselves were responsible for managing the
device's power states and takes care of register states.

After upgrading to the generic structure, PCI core will take care of
required tasks and drivers should do only device-specific operations.

The driver was calling pci_save/restore_state(), pci_choose_state() and
pci_set_power_state() which is no more needed.

Compile-tested only.

Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
---
 drivers/scsi/lpfc/lpfc_init.c | 100 +++++++++++-----------------------
 1 file changed, 33 insertions(+), 67 deletions(-)

diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 6637f84a3d1b..a36309b48144 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -12452,8 +12452,7 @@ lpfc_pci_remove_one_s3(struct pci_dev *pdev)
 
 /**
  * lpfc_pci_suspend_one_s3 - PCI func to suspend SLI-3 device for power mgmnt
- * @pdev: pointer to PCI device
- * @msg: power management message
+ * @dev_d: pointer to device
  *
  * This routine is to be called from the kernel's PCI subsystem to support
  * system Power Management (PM) to device with SLI-3 interface spec. When
@@ -12471,10 +12470,10 @@ lpfc_pci_remove_one_s3(struct pci_dev *pdev)
  * 	0 - driver suspended the device
  * 	Error otherwise
  **/
-static int
-lpfc_pci_suspend_one_s3(struct pci_dev *pdev, pm_message_t msg)
+static int __maybe_unused
+lpfc_pci_suspend_one_s3(struct device *dev_d)
 {
-	struct Scsi_Host *shost = pci_get_drvdata(pdev);
+	struct Scsi_Host *shost = dev_get_drvdata(dev_d);
 	struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
 
 	lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
@@ -12488,16 +12487,12 @@ lpfc_pci_suspend_one_s3(struct pci_dev *pdev, pm_message_t msg)
 	/* Disable interrupt from device */
 	lpfc_sli_disable_intr(phba);
 
-	/* Save device state to PCI config space */
-	pci_save_state(pdev);
-	pci_set_power_state(pdev, PCI_D3hot);
-
 	return 0;
 }
 
 /**
  * lpfc_pci_resume_one_s3 - PCI func to resume SLI-3 device for power mgmnt
- * @pdev: pointer to PCI device
+ * @dev_d: pointer to device
  *
  * This routine is to be called from the kernel's PCI subsystem to support
  * system Power Management (PM) to device with SLI-3 interface spec. When PM
@@ -12514,10 +12509,10 @@ lpfc_pci_suspend_one_s3(struct pci_dev *pdev, pm_message_t msg)
  * 	0 - driver suspended the device
  * 	Error otherwise
  **/
-static int
-lpfc_pci_resume_one_s3(struct pci_dev *pdev)
+static int __maybe_unused
+lpfc_pci_resume_one_s3(struct device *dev_d)
 {
-	struct Scsi_Host *shost = pci_get_drvdata(pdev);
+	struct Scsi_Host *shost = dev_get_drvdata(dev_d);
 	struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
 	uint32_t intr_mode;
 	int error;
@@ -12525,19 +12520,6 @@ lpfc_pci_resume_one_s3(struct pci_dev *pdev)
 	lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
 			"0452 PCI device Power Management resume.\n");
 
-	/* Restore device state from PCI config space */
-	pci_set_power_state(pdev, PCI_D0);
-	pci_restore_state(pdev);
-
-	/*
-	 * As the new kernel behavior of pci_restore_state() API call clears
-	 * device saved_state flag, need to save the restored state again.
-	 */
-	pci_save_state(pdev);
-
-	if (pdev->is_busmaster)
-		pci_set_master(pdev);
-
 	/* Startup the kernel thread for this host adapter. */
 	phba->worker_thread = kthread_run(lpfc_do_work, phba,
 					"lpfc_worker_%d", phba->brd_no);
@@ -13294,8 +13276,7 @@ lpfc_pci_remove_one_s4(struct pci_dev *pdev)
 
 /**
  * lpfc_pci_suspend_one_s4 - PCI func to suspend SLI-4 device for power mgmnt
- * @pdev: pointer to PCI device
- * @msg: power management message
+ * @dev_d: pointer to device
  *
  * This routine is called from the kernel's PCI subsystem to support system
  * Power Management (PM) to device with SLI-4 interface spec. When PM invokes
@@ -13313,10 +13294,10 @@ lpfc_pci_remove_one_s4(struct pci_dev *pdev)
  * 	0 - driver suspended the device
  * 	Error otherwise
  **/
-static int
-lpfc_pci_suspend_one_s4(struct pci_dev *pdev, pm_message_t msg)
+static int __maybe_unused
+lpfc_pci_suspend_one_s4(struct device *dev_d)
 {
-	struct Scsi_Host *shost = pci_get_drvdata(pdev);
+	struct Scsi_Host *shost = dev_get_drvdata(dev_d);
 	struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
 
 	lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
@@ -13331,16 +13312,12 @@ lpfc_pci_suspend_one_s4(struct pci_dev *pdev, pm_message_t msg)
 	lpfc_sli4_disable_intr(phba);
 	lpfc_sli4_queue_destroy(phba);
 
-	/* Save device state to PCI config space */
-	pci_save_state(pdev);
-	pci_set_power_state(pdev, PCI_D3hot);
-
 	return 0;
 }
 
 /**
  * lpfc_pci_resume_one_s4 - PCI func to resume SLI-4 device for power mgmnt
- * @pdev: pointer to PCI device
+ * @dev_d: pointer to device
  *
  * This routine is called from the kernel's PCI subsystem to support system
  * Power Management (PM) to device with SLI-4 interface spac. When PM invokes
@@ -13357,10 +13334,10 @@ lpfc_pci_suspend_one_s4(struct pci_dev *pdev, pm_message_t msg)
  * 	0 - driver suspended the device
  * 	Error otherwise
  **/
-static int
-lpfc_pci_resume_one_s4(struct pci_dev *pdev)
+static int __maybe_unused
+lpfc_pci_resume_one_s4(struct device *dev_d)
 {
-	struct Scsi_Host *shost = pci_get_drvdata(pdev);
+	struct Scsi_Host *shost = dev_get_drvdata(dev_d);
 	struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
 	uint32_t intr_mode;
 	int error;
@@ -13368,19 +13345,6 @@ lpfc_pci_resume_one_s4(struct pci_dev *pdev)
 	lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
 			"0292 PCI device Power Management resume.\n");
 
-	/* Restore device state from PCI config space */
-	pci_set_power_state(pdev, PCI_D0);
-	pci_restore_state(pdev);
-
-	/*
-	 * As the new kernel behavior of pci_restore_state() API call clears
-	 * device saved_state flag, need to save the restored state again.
-	 */
-	pci_save_state(pdev);
-
-	if (pdev->is_busmaster)
-		pci_set_master(pdev);
-
 	 /* Startup the kernel thread for this host adapter. */
 	phba->worker_thread = kthread_run(lpfc_do_work, phba,
 					"lpfc_worker_%d", phba->brd_no);
@@ -13696,8 +13660,7 @@ lpfc_pci_remove_one(struct pci_dev *pdev)
 
 /**
  * lpfc_pci_suspend_one - lpfc PCI func to suspend dev for power management
- * @pdev: pointer to PCI device
- * @msg: power management message
+ * @dev: pointer to device
  *
  * This routine is to be registered to the kernel's PCI subsystem to support
  * system Power Management (PM). When PM invokes this method, it dispatches
@@ -13708,19 +13671,19 @@ lpfc_pci_remove_one(struct pci_dev *pdev)
  * 	0 - driver suspended the device
  * 	Error otherwise
  **/
-static int
-lpfc_pci_suspend_one(struct pci_dev *pdev, pm_message_t msg)
+static int __maybe_unused
+lpfc_pci_suspend_one(struct device *dev)
 {
-	struct Scsi_Host *shost = pci_get_drvdata(pdev);
+	struct Scsi_Host *shost = dev_get_drvdata(dev);
 	struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
 	int rc = -ENODEV;
 
 	switch (phba->pci_dev_grp) {
 	case LPFC_PCI_DEV_LP:
-		rc = lpfc_pci_suspend_one_s3(pdev, msg);
+		rc = lpfc_pci_suspend_one_s3(dev);
 		break;
 	case LPFC_PCI_DEV_OC:
-		rc = lpfc_pci_suspend_one_s4(pdev, msg);
+		rc = lpfc_pci_suspend_one_s4(dev);
 		break;
 	default:
 		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
@@ -13733,7 +13696,7 @@ lpfc_pci_suspend_one(struct pci_dev *pdev, pm_message_t msg)
 
 /**
  * lpfc_pci_resume_one - lpfc PCI func to resume dev for power management
- * @pdev: pointer to PCI device
+ * @dev: pointer to device
  *
  * This routine is to be registered to the kernel's PCI subsystem to support
  * system Power Management (PM). When PM invokes this method, it dispatches
@@ -13744,19 +13707,19 @@ lpfc_pci_suspend_one(struct pci_dev *pdev, pm_message_t msg)
  * 	0 - driver suspended the device
  * 	Error otherwise
  **/
-static int
-lpfc_pci_resume_one(struct pci_dev *pdev)
+static int __maybe_unused
+lpfc_pci_resume_one(struct device *dev)
 {
-	struct Scsi_Host *shost = pci_get_drvdata(pdev);
+	struct Scsi_Host *shost = dev_get_drvdata(dev);
 	struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
 	int rc = -ENODEV;
 
 	switch (phba->pci_dev_grp) {
 	case LPFC_PCI_DEV_LP:
-		rc = lpfc_pci_resume_one_s3(pdev);
+		rc = lpfc_pci_resume_one_s3(dev);
 		break;
 	case LPFC_PCI_DEV_OC:
-		rc = lpfc_pci_resume_one_s4(pdev);
+		rc = lpfc_pci_resume_one_s4(dev);
 		break;
 	default:
 		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
@@ -13936,14 +13899,17 @@ static const struct pci_error_handlers lpfc_err_handler = {
 	.resume = lpfc_io_resume,
 };
 
+static SIMPLE_DEV_PM_OPS(lpfc_pci_pm_ops_one,
+			 lpfc_pci_suspend_one,
+			 lpfc_pci_resume_one);
+
 static struct pci_driver lpfc_driver = {
 	.name		= LPFC_DRIVER_NAME,
 	.id_table	= lpfc_id_table,
 	.probe		= lpfc_pci_probe_one,
 	.remove		= lpfc_pci_remove_one,
 	.shutdown	= lpfc_pci_remove_one,
-	.suspend        = lpfc_pci_suspend_one,
-	.resume		= lpfc_pci_resume_one,
+	.driver.pm	= &lpfc_pci_pm_ops_one,
 	.err_handler    = &lpfc_err_handler,
 };
 
-- 
2.27.0

_______________________________________________
Linux-kernel-mentees mailing list
Linux-kernel-mentees@lists.linuxfoundation.org
https://lists.linuxfoundation.org/mailman/listinfo/linux-kernel-mentees

  parent reply	other threads:[~2020-07-17  6:37 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-17  6:34 [Linux-kernel-mentees] [PATCH v1 00/15] scsi: " Vaibhav Gupta
2020-07-17  6:34 ` [Linux-kernel-mentees] [PATCH v1 01/15] scsi: megaraid_sas: " Vaibhav Gupta
2020-07-17  6:34 ` [Linux-kernel-mentees] [PATCH v1 02/15] scsi: aacraid: " Vaibhav Gupta
2020-07-17  6:34 ` [Linux-kernel-mentees] [PATCH v1 03/15] scsi: aic7xxx: " Vaibhav Gupta
2020-07-17  6:34 ` [Linux-kernel-mentees] [PATCH v1 04/15] scsi: aic79xx: " Vaibhav Gupta
2020-07-17  6:34 ` [Linux-kernel-mentees] [PATCH v1 05/15] scsi: arcmsr: " Vaibhav Gupta
2020-07-17  6:34 ` [Linux-kernel-mentees] [PATCH v1 06/15] scsi: esas2r: " Vaibhav Gupta
2020-07-17  6:34 ` [Linux-kernel-mentees] [PATCH v1 07/15] scsi: hisi_sas_v3_hw: " Vaibhav Gupta
2020-07-20  6:16   ` chenxiang (M)
2020-07-20  6:32     ` Vaibhav Gupta
2020-07-17  6:34 ` [Linux-kernel-mentees] [PATCH v1 08/15] scsi: mpt3sas_scsih: " Vaibhav Gupta
2020-07-17  6:34 ` Vaibhav Gupta [this message]
2020-07-17  6:34 ` [Linux-kernel-mentees] [PATCH v1 10/15] scsi: pm_8001: " Vaibhav Gupta
2020-07-17  6:34 ` [Linux-kernel-mentees] [PATCH v1 11/15] scsi: hpsa: " Vaibhav Gupta
2020-07-17  6:34 ` [Linux-kernel-mentees] [PATCH v1 12/15] scsi: 3w-9xxx: " Vaibhav Gupta
2020-07-17  6:34 ` [Linux-kernel-mentees] [PATCH v1 13/15] scsi: 3w-sas: " Vaibhav Gupta
2020-07-17  6:34 ` [Linux-kernel-mentees] [PATCH v1 14/15] scsi: mvumi: " Vaibhav Gupta
2020-07-17  6:34 ` [Linux-kernel-mentees] [PATCH v1 15/15] scsi: pmcraid: " Vaibhav Gupta

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200717063438.175022-10-vaibhavgupta40@gmail.com \
    --to=vaibhavgupta40@gmail.com \
    --cc=MPT-FusionLinux.pdl@broadcom.com \
    --cc=aacraid@microsemi.com \
    --cc=aradford@gmail.com \
    --cc=bhelgaas@google.com \
    --cc=bjorn@helgaas.com \
    --cc=dick.kennedy@broadcom.com \
    --cc=don.brace@microsemi.com \
    --cc=esc.storagedev@microsemi.com \
    --cc=hare@suse.com \
    --cc=helgaas@kernel.org \
    --cc=james.smart@broadcom.com \
    --cc=jejb@linux.ibm.com \
    --cc=jinpu.wang@cloud.ionos.com \
    --cc=john.garry@huawei.com \
    --cc=kashyap.desai@broadcom.com \
    --cc=linux-kernel-mentees@lists.linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=linuxdrivers@attotech.com \
    --cc=martin.petersen@oracle.com \
    --cc=megaraidlinux.pdl@broadcom.com \
    --cc=sathya.prakash@broadcom.com \
    --cc=shivasharan.srikanteshwara@broadcom.com \
    --cc=sreekanth.reddy@broadcom.com \
    --cc=suganath-prabu.subramani@broadcom.com \
    --cc=sumit.saxena@broadcom.com \
    --cc=vaibhav.varodek@gmail.com \
    --subject='Re: [Linux-kernel-mentees] [PATCH v1 09/15] scsi: lpfc: use generic power management' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).