From: Mathieu Poirier <mathieu.poirier@linaro.org>
To: peng.fan@nxp.com
Cc: ohad@wizery.com, bjorn.andersson@linaro.org,
o.rempel@pengutronix.de, robh+dt@kernel.org, shawnguo@kernel.org,
s.hauer@pengutronix.de, kernel@pengutronix.de,
festevam@gmail.com, linux-imx@nxp.com,
linux-remoteproc@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, paul@crapouillou.net,
matthias.bgg@gmail.com, agross@kernel.org,
patrice.chotard@st.com
Subject: Re: [PATCH V6 10/10] remoteproc: imx_proc: enable virtio/mailbox
Date: Thu, 14 Jan 2021 14:36:06 -0700 [thread overview]
Message-ID: <20210114213606.GD255481@xps15> (raw)
In-Reply-To: <1610444359-1857-11-git-send-email-peng.fan@nxp.com>
On Tue, Jan 12, 2021 at 05:39:19PM +0800, peng.fan@nxp.com wrote:
> From: Peng Fan <peng.fan@nxp.com>
>
> Use virtio/mailbox to build connection between Remote Proccessors
> and Linux. Add work queue to handle incoming messages.
>
> Reviewed-by: Richard Zhu <hongxing.zhu@nxp.com>
> Signed-off-by: Peng Fan <peng.fan@nxp.com>
> ---
> drivers/remoteproc/imx_rproc.c | 115 ++++++++++++++++++++++++++++++++-
> 1 file changed, 112 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/remoteproc/imx_rproc.c b/drivers/remoteproc/imx_rproc.c
> index e62a53ee128e..812b077f1282 100644
> --- a/drivers/remoteproc/imx_rproc.c
> +++ b/drivers/remoteproc/imx_rproc.c
> @@ -7,6 +7,7 @@
> #include <linux/err.h>
> #include <linux/interrupt.h>
> #include <linux/kernel.h>
> +#include <linux/mailbox_client.h>
> #include <linux/mfd/syscon.h>
> #include <linux/module.h>
> #include <linux/of_address.h>
> @@ -15,6 +16,9 @@
> #include <linux/platform_device.h>
> #include <linux/regmap.h>
> #include <linux/remoteproc.h>
> +#include <linux/workqueue.h>
> +
> +#include "remoteproc_internal.h"
>
> #define IMX7D_SRC_SCR 0x0C
> #define IMX7D_ENABLE_M4 BIT(3)
> @@ -86,6 +90,11 @@ struct imx_rproc {
> const struct imx_rproc_dcfg *dcfg;
> struct imx_rproc_mem mem[IMX7D_RPROC_MEM_MAX];
> struct clk *clk;
> + struct mbox_client cl;
> + struct mbox_chan *tx_ch;
> + struct mbox_chan *rx_ch;
> + struct work_struct rproc_work;
> + struct workqueue_struct *workqueue;
> };
>
> static const struct imx_rproc_att imx_rproc_att_imx8mq[] = {
> @@ -366,9 +375,33 @@ static int imx_rproc_parse_fw(struct rproc *rproc, const struct firmware *fw)
> return 0;
> }
>
> +static void imx_rproc_kick(struct rproc *rproc, int vqid)
> +{
> + struct imx_rproc *priv = rproc->priv;
> + int err;
> + __u32 mmsg;
> +
> + if (!priv->tx_ch) {
> + dev_err(priv->dev, "No initialized mbox tx channel\n");
> + return;
> + }
> +
> + /*
> + * Send the index of the triggered virtqueue as the mu payload.
> + * Let remote processor know which virtqueue is used.
> + */
> + mmsg = vqid << 16;
> +
> + err = mbox_send_message(priv->tx_ch, (void *)&mmsg);
> + if (err < 0)
> + dev_err(priv->dev, "%s: failed (%d, err:%d)\n",
> + __func__, vqid, err);
> +}
> +
> static const struct rproc_ops imx_rproc_ops = {
> .start = imx_rproc_start,
> .stop = imx_rproc_stop,
> + .kick = imx_rproc_kick,
> .da_to_va = imx_rproc_da_to_va,
> .load = rproc_elf_load_segments,
> .parse_fw = imx_rproc_parse_fw,
> @@ -444,6 +477,65 @@ static int imx_rproc_addr_init(struct imx_rproc *priv,
> return 0;
> }
>
> +static void imx_rproc_vq_work(struct work_struct *work)
> +{
> + struct imx_rproc *priv = container_of(work, struct imx_rproc,
> + rproc_work);
> +
> + rproc_vq_interrupt(priv->rproc, 0);
> + rproc_vq_interrupt(priv->rproc, 1);
> +}
> +
> +static void imx_rproc_rx_callback(struct mbox_client *cl, void *msg)
> +{
> + struct rproc *rproc = dev_get_drvdata(cl->dev);
> + struct imx_rproc *priv = rproc->priv;
> +
> + queue_work(priv->workqueue, &priv->rproc_work);
> +}
> +
> +static int imx_rproc_xtr_mbox_init(struct rproc *rproc)
> +{
> + struct imx_rproc *priv = rproc->priv;
> + struct device *dev = priv->dev;
> + struct mbox_client *cl;
> + int ret;
> +
> + if (!of_get_property(dev->of_node, "mbox-names", NULL))
> + return 0;
> +
> + cl = &priv->cl;
> + cl->dev = dev;
> + cl->tx_block = true;
> + cl->tx_tout = 100;
> + cl->knows_txdone = false;
> + cl->rx_callback = imx_rproc_rx_callback;
> +
> + priv->tx_ch = mbox_request_channel_byname(cl, "tx");
> + if (IS_ERR(priv->tx_ch)) {
> + ret = PTR_ERR(priv->tx_ch);
> + return dev_err_probe(cl->dev, PTR_ERR(priv->tx_ch),
> + "failed to request tx mailbox channel: %d\n", ret);
return dev_err_probe(cl->dev, ret,
"failed to request tx mailbox channel: %d\n", ret);
> + }
> +
> + priv->rx_ch = mbox_request_channel_byname(cl, "rx");
> + if (IS_ERR(priv->rx_ch)) {
> + mbox_free_channel(priv->tx_ch);
> + return dev_err_probe(cl->dev, PTR_ERR(priv->rx_ch),
> + "failed to request mbox tx chan\n");
ret = PTR_ERR(priv->rx_ch);
return dev_err_probe(cl->dev, ret,
"failed to request rx mailbox channel: %d\n", ret);
> + }
> +
> + return 0;
> +}
> +
> +static void imx_rproc_free_mbox(struct rproc *rproc)
> +{
> + struct imx_rproc *priv = rproc->priv;
> +
> + mbox_free_channel(priv->tx_ch);
> + mbox_free_channel(priv->rx_ch);
> +}
> +
> static int imx_rproc_probe(struct platform_device *pdev)
> {
> struct device *dev = &pdev->dev;
> @@ -481,18 +573,28 @@ static int imx_rproc_probe(struct platform_device *pdev)
> priv->dev = dev;
>
> dev_set_drvdata(dev, rproc);
> + priv->workqueue = create_workqueue(dev_name(dev));
> + if (!priv->workqueue) {
> + dev_err(dev, "cannot create workqueue\n");
> + ret = -ENOMEM;
> + goto err_put_rproc;
> + }
> +
> + ret = imx_rproc_xtr_mbox_init(rproc);
> + if (ret)
> + goto err_put_wkq;
>
> ret = imx_rproc_addr_init(priv, pdev);
> if (ret) {
> dev_err(dev, "failed on imx_rproc_addr_init\n");
> - goto err_put_rproc;
> + goto err_put_mbox;
> }
>
> priv->clk = devm_clk_get(dev, NULL);
> if (IS_ERR(priv->clk)) {
> dev_err(dev, "Failed to get clock\n");
> ret = PTR_ERR(priv->clk);
> - goto err_put_rproc;
> + goto err_put_mbox;
> }
>
> /*
> @@ -502,9 +604,11 @@ static int imx_rproc_probe(struct platform_device *pdev)
> ret = clk_prepare_enable(priv->clk);
> if (ret) {
> dev_err(&rproc->dev, "Failed to enable clock\n");
> - goto err_put_rproc;
> + goto err_put_mbox;
> }
>
> + INIT_WORK(&(priv->rproc_work), imx_rproc_vq_work);
> +
> ret = rproc_add(rproc);
> if (ret) {
> dev_err(dev, "rproc_add failed\n");
> @@ -515,6 +619,10 @@ static int imx_rproc_probe(struct platform_device *pdev)
>
> err_put_clk:
> clk_disable_unprepare(priv->clk);
> +err_put_mbox:
> + imx_rproc_free_mbox(rproc);
> +err_put_wkq:
> + destroy_workqueue(priv->workqueue);
> err_put_rproc:
> rproc_free(rproc);
>
> @@ -527,6 +635,7 @@ static int imx_rproc_remove(struct platform_device *pdev)
> struct imx_rproc *priv = rproc->priv;
>
> clk_disable_unprepare(priv->clk);
> + imx_rproc_free_mbox(rproc);
Function rproc_del() needs to be called first so that rproc_shutdown() is
executed (because rproc->auto_boot is true).
Thanks,
Mathieu
> rproc_del(rproc);
> rproc_free(rproc);
>
> --
> 2.28.0
>
next prev parent reply other threads:[~2021-01-14 21:37 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-01-12 9:39 [PATCH V6 00/10] remoteproc: imx_rproc: support iMX8MQ/M peng.fan
2021-01-12 9:39 ` [PATCH V6 01/10] dt-bindings: remoteproc: convert imx rproc bindings to json-schema peng.fan
2021-01-12 9:39 ` [PATCH V6 02/10] dt-bindings: remoteproc: imx_rproc: add i.MX8MQ/M support peng.fan
2021-01-12 9:39 ` [PATCH V6 03/10] remoteproc: introduce is_iomem to rproc_mem_entry peng.fan
2021-01-12 9:39 ` [PATCH V6 04/10] remoteproc: add is_iomem to da_to_va peng.fan
2021-01-12 9:39 ` [PATCH V6 05/10] remoteproc: imx_rproc: correct err message peng.fan
2021-01-12 18:47 ` Mathieu Poirier
2021-01-12 9:39 ` [PATCH V6 06/10] remoteproc: imx_rproc: use devm_ioremap peng.fan
2021-01-12 9:39 ` [PATCH V6 07/10] remoteproc: imx_rproc: add i.MX specific parse fw hook peng.fan
2021-01-14 21:38 ` Mathieu Poirier
2021-01-15 3:28 ` Peng Fan
2021-01-12 9:39 ` [PATCH V6 08/10] remoteproc: imx_rproc: support i.MX8MQ/M peng.fan
2021-01-12 9:39 ` [PATCH V6 09/10] remoteproc: imx_rproc: ignore mapping vdev regions peng.fan
2021-01-14 20:54 ` Mathieu Poirier
2021-01-12 9:39 ` [PATCH V6 10/10] remoteproc: imx_proc: enable virtio/mailbox peng.fan
2021-01-14 21:36 ` Mathieu Poirier [this message]
2021-01-15 3:27 ` Peng Fan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210114213606.GD255481@xps15 \
--to=mathieu.poirier@linaro.org \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-remoteproc@vger.kernel.org \
--cc=matthias.bgg@gmail.com \
--cc=o.rempel@pengutronix.de \
--cc=ohad@wizery.com \
--cc=patrice.chotard@st.com \
--cc=paul@crapouillou.net \
--cc=peng.fan@nxp.com \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).