linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Stefan Richter <stefanr@s5r6.in-berlin.de>
To: linux1394-devel@lists.sourceforge.net
Cc: linuxppc-dev@ozlabs.org, linux-kernel@vger.kernel.org
Subject: [PATCH 1/3] firewire: fw-ohci: PPC PMac platform code
Date: Sat, 1 Mar 2008 02:42:56 +0100 (CET)	[thread overview]
Message-ID: <tkrat.7e8e04e66a38dcd6@s5r6.in-berlin.de> (raw)
In-Reply-To: <tkrat.ac97915a5b51e35b@s5r6.in-berlin.de>

Copied from ohci1394.c.  This code is necessary to prevent machine check
exceptions when reloading or resuming the driver.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
---
 drivers/firewire/fw-ohci.c |   50 +++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 50 insertions(+)

Index: linux-2.6.25-rc3/drivers/firewire/fw-ohci.c
===================================================================
--- linux-2.6.25-rc3.orig/drivers/firewire/fw-ohci.c
+++ linux-2.6.25-rc3/drivers/firewire/fw-ohci.c
@@ -33,6 +33,10 @@
 #include <asm/page.h>
 #include <asm/system.h>
 
+#ifdef CONFIG_PPC_PMAC
+#include <asm/pmac_feature.h>
+#endif
+
 #include "fw-ohci.h"
 #include "fw-transaction.h"
 
@@ -2057,6 +2061,18 @@ pci_probe(struct pci_dev *dev, const str
 	int err;
 	size_t size;
 
+#ifdef CONFIG_PPC_PMAC
+	/* Necessary on some machines if fw-ohci was loaded/ unloaded before */
+	if (machine_is(powermac)) {
+		struct device_node *ofn = pci_device_to_OF_node(dev);
+
+		if (ofn) {
+			pmac_call_feature(PMAC_FTR_1394_CABLE_POWER, ofn, 0, 1);
+			pmac_call_feature(PMAC_FTR_1394_ENABLE, ofn, 0, 1);
+		}
+	}
+#endif /* CONFIG_PPC_PMAC */
+
 	ohci = kzalloc(sizeof(*ohci), GFP_KERNEL);
 	if (ohci == NULL) {
 		fw_error("Could not malloc fw_ohci data.\n");
@@ -2189,6 +2205,20 @@ static void pci_remove(struct pci_dev *d
 	pci_iounmap(dev, ohci->registers);
 	pci_release_region(dev, 0);
 	pci_disable_device(dev);
+
+#ifdef CONFIG_PPC_PMAC
+	/* On UniNorth, power down the cable and turn off the chip clock
+	 * to save power on laptops */
+	if (machine_is(powermac)) {
+		struct device_node* ofn = pci_device_to_OF_node(dev);
+
+		if (ofn) {
+			pmac_call_feature(PMAC_FTR_1394_ENABLE, ofn, 0, 0);
+			pmac_call_feature(PMAC_FTR_1394_CABLE_POWER, ofn, 0, 0);
+		}
+	}
+#endif /* CONFIG_PPC_PMAC */
+
 	kfree(&ohci->card);
 
 	fw_notify("Removed fw-ohci device.\n");
@@ -2211,6 +2241,16 @@ static int pci_suspend(struct pci_dev *p
 	if (err)
 		fw_error("pci_set_power_state failed with %d\n", err);
 
+/* PowerMac suspend code comes last */
+#ifdef CONFIG_PPC_PMAC
+	if (machine_is(powermac)) {
+		struct device_node *ofn = pci_device_to_OF_node(pdev);
+
+		if (ofn)
+			pmac_call_feature(PMAC_FTR_1394_ENABLE, ofn, 0, 0);
+	}
+#endif /* CONFIG_PPC_PMAC */
+
 	return 0;
 }
 
@@ -2219,6 +2259,16 @@ static int pci_resume(struct pci_dev *pd
 	struct fw_ohci *ohci = pci_get_drvdata(pdev);
 	int err;
 
+/* PowerMac resume code comes first */
+#ifdef CONFIG_PPC_PMAC
+	if (machine_is(powermac)) {
+		struct device_node *ofn = pci_device_to_OF_node(pdev);
+
+		if (ofn)
+			pmac_call_feature(PMAC_FTR_1394_ENABLE, ofn, 0, 1);
+	}
+#endif /* CONFIG_PPC_PMAC */
+
 	pci_set_power_state(pdev, PCI_D0);
 	pci_restore_state(pdev);
 	err = pci_enable_device(pdev);

-- 
Stefan Richter
-=====-==--- --== ----=
http://arcgraph.de/sr/


  reply	other threads:[~2008-03-01  1:43 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-03-01  1:42 [PATCH 0/3] firewire: PPC PMac updates Stefan Richter
2008-03-01  1:42 ` Stefan Richter [this message]
2008-03-01  2:04   ` [PATCH 1/3] firewire: fw-ohci: PPC PMac platform code Stefan Richter
2008-03-01  2:59   ` Benjamin Herrenschmidt
2008-03-01  8:06     ` Stefan Richter
2008-03-01 11:33       ` [PATCH 0/4] firewire, ieee1394: bus power lost after resume (PPC PMac) Stefan Richter
2008-03-01 11:34         ` [PATCH 1/4] firewire: fw-ohci: switch on bus power after resume on PPC PMac Stefan Richter
2008-03-01 11:35           ` [PATCH 2/4] firewire: fw-ohci: refactor probe, remove, suspend, resume Stefan Richter
2008-03-01 11:36             ` [PATCH 3/4] ieee1394: ohci1394: switch on bus power after resume on PPC PMac Stefan Richter
2008-03-01 11:36               ` [PATCH 4/4] ieee1394: ohci1394: refactor probe, remove, suspend, resume Stefan Richter
2008-03-01 19:43   ` [PATCH 1/3] firewire: fw-ohci: PPC PMac platform code Jarod Wilson
2008-03-01 23:48     ` Benjamin Herrenschmidt
2008-03-01  1:47 ` [PATCH 2/3] firewire: fw-ohci: Apple UniNorth 1st generation support Stefan Richter
2008-03-01  1:50 ` [PATCH 3/3] firewire: fw-ohci: shut up false compiler warning on PPC32 Stefan Richter
2008-03-01  3:17   ` Stephen Rothwell
2008-03-01  8:10     ` Stefan Richter
2008-03-01 11:21       ` [PATCH 3/3 update] " Stefan Richter

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=tkrat.7e8e04e66a38dcd6@s5r6.in-berlin.de \
    --to=stefanr@s5r6.in-berlin.de \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux1394-devel@lists.sourceforge.net \
    --cc=linuxppc-dev@ozlabs.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).