linux-kselftest.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v1 0/7] kunit: create a centralized executor to dispatch all KUnit tests
@ 2020-01-28  7:19 Brendan Higgins
  2020-01-28  7:19 ` [PATCH v1 1/7] vmlinux.lds.h: add linker section for KUnit test suites Brendan Higgins
                   ` (6 more replies)
  0 siblings, 7 replies; 15+ messages in thread
From: Brendan Higgins @ 2020-01-28  7:19 UTC (permalink / raw)
  To: jdike, richard, anton.ivanov, arnd, keescook, skhan,
	alan.maguire, yzaikin, davidgow, akpm, rppt, frowand.list
  Cc: gregkh, sboyd, logang, mcgrof, knut.omang, linux-um, linux-arch,
	linux-kselftest, kunit-dev, linux-kernel, linux-doc,
	Brendan Higgins

## TL;DR

This patchset adds a centralized executor to dispatch tests rather than
relying on late_initcall to schedule each test suite separately along
with a couple of new features that depend on it.

## What am I trying to do?

Conceptually, I am trying to provide a mechanism by which test suites
can be grouped together so that they can be reasoned about collectively.
The last two of three patches in this series add features which depend
on this:

PATCH 5/7 Prints out a test plan right before KUnit tests are run[1];
          this is valuable because it makes it possible for a test
          harness to detect whether the number of tests run matches the
          number of tests expected to be run, ensuring that no tests
          silently failed.

PATCH 6/7 Add a new kernel command-line option which allows the user to
          specify that the kernel poweroff, halt, or reboot after
          completing all KUnit tests; this is very handy for running
          KUnit tests on UML or a VM so that the UML/VM process exits
          cleanly immediately after running all tests without needing a
          special initramfs.

In addition, by dispatching tests from a single location, we can
guarantee that all KUnit tests run after late_init is complete, which
was a concern during the initial KUnit patchset review (this has not
been a problem in practice, but resolving with certainty is nevertheless
desirable).

Other use cases for this exist, but the above features should provide an
idea of the value that this could provide.

Alan Maguire (1):
  kunit: test: create a single centralized executor for all tests

Brendan Higgins (5):
  vmlinux.lds.h: add linker section for KUnit test suites
  arch: um: add linker section for KUnit test suites
  init: main: add KUnit to kernel init
  kunit: test: add test plan to KUnit TAP format
  Documentation: Add kunit_shutdown to kernel-parameters.txt

David Gow (1):
  kunit: Add 'kunit_shutdown' option

 .../admin-guide/kernel-parameters.txt         |  7 ++
 arch/um/include/asm/common.lds.S              |  4 +
 include/asm-generic/vmlinux.lds.h             |  8 ++
 include/kunit/test.h                          | 82 ++++++++++++-------
 init/main.c                                   |  4 +
 lib/kunit/Makefile                            |  3 +-
 lib/kunit/executor.c                          | 71 ++++++++++++++++
 lib/kunit/test.c                              | 11 ---
 tools/testing/kunit/kunit_kernel.py           |  2 +-
 tools/testing/kunit/kunit_parser.py           | 76 ++++++++++++++---
 .../test_is_test_passed-all_passed.log        |  1 +
 .../test_data/test_is_test_passed-crash.log   |  1 +
 .../test_data/test_is_test_passed-failure.log |  1 +
 13 files changed, 217 insertions(+), 54 deletions(-)
 create mode 100644 lib/kunit/executor.c

-- 
2.25.0.341.g760bfbb309-goog


^ permalink raw reply	[flat|nested] 15+ messages in thread

* [PATCH v1 1/7] vmlinux.lds.h: add linker section for KUnit test suites
  2020-01-28  7:19 [PATCH v1 0/7] kunit: create a centralized executor to dispatch all KUnit tests Brendan Higgins
@ 2020-01-28  7:19 ` Brendan Higgins
  2020-01-28  7:19 ` [PATCH v1 2/7] arch: um: " Brendan Higgins
                   ` (5 subsequent siblings)
  6 siblings, 0 replies; 15+ messages in thread
From: Brendan Higgins @ 2020-01-28  7:19 UTC (permalink / raw)
  To: jdike, richard, anton.ivanov, arnd, keescook, skhan,
	alan.maguire, yzaikin, davidgow, akpm, rppt, frowand.list
  Cc: gregkh, sboyd, logang, mcgrof, knut.omang, linux-um, linux-arch,
	linux-kselftest, kunit-dev, linux-kernel, linux-doc,
	Brendan Higgins

Add a linker section where KUnit can put references to its test suites.
This patch is the first step in transitioning to dispatching all KUnit
tests from a centralized executor rather than having each as its own
separate late_initcall.

Co-developed-by: Iurii Zaikin <yzaikin@google.com>
Signed-off-by: Iurii Zaikin <yzaikin@google.com>
Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
---
 include/asm-generic/vmlinux.lds.h | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h
index e00f41aa8ec4f..99a866f49cb3d 100644
--- a/include/asm-generic/vmlinux.lds.h
+++ b/include/asm-generic/vmlinux.lds.h
@@ -856,6 +856,13 @@
 		KEEP(*(.con_initcall.init))				\
 		__con_initcall_end = .;
 
+/* Alignment must be consistent with (kunit_suite *) in include/kunit/test.h */
+#define KUNIT_TEST_SUITES						\
+		. = ALIGN(8);						\
+		__kunit_suites_start = .;				\
+		KEEP(*(.kunit_test_suites))				\
+		__kunit_suites_end = .;
+
 #ifdef CONFIG_BLK_DEV_INITRD
 #define INIT_RAM_FS							\
 	. = ALIGN(4);							\
@@ -1024,6 +1031,7 @@
 		INIT_CALLS						\
 		CON_INITCALL						\
 		INIT_RAM_FS						\
+		KUNIT_TEST_SUITES					\
 	}
 
 #define BSS_SECTION(sbss_align, bss_align, stop_align)			\
-- 
2.25.0.341.g760bfbb309-goog


^ permalink raw reply related	[flat|nested] 15+ messages in thread

* [PATCH v1 2/7] arch: um: add linker section for KUnit test suites
  2020-01-28  7:19 [PATCH v1 0/7] kunit: create a centralized executor to dispatch all KUnit tests Brendan Higgins
  2020-01-28  7:19 ` [PATCH v1 1/7] vmlinux.lds.h: add linker section for KUnit test suites Brendan Higgins
@ 2020-01-28  7:19 ` Brendan Higgins
  2020-01-28  7:19 ` [PATCH v1 3/7] kunit: test: create a single centralized executor for all tests Brendan Higgins
                   ` (4 subsequent siblings)
  6 siblings, 0 replies; 15+ messages in thread
From: Brendan Higgins @ 2020-01-28  7:19 UTC (permalink / raw)
  To: jdike, richard, anton.ivanov, arnd, keescook, skhan,
	alan.maguire, yzaikin, davidgow, akpm, rppt, frowand.list
  Cc: gregkh, sboyd, logang, mcgrof, knut.omang, linux-um, linux-arch,
	linux-kselftest, kunit-dev, linux-kernel, linux-doc,
	Brendan Higgins

Add a linker section to UML where KUnit can put references to its test
suites. This patch is an early step in transitioning to dispatching all
KUnit tests from a centralized executor rather than having each as its
own separate late_initcall.

Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
---
 arch/um/include/asm/common.lds.S | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/um/include/asm/common.lds.S b/arch/um/include/asm/common.lds.S
index 7145ce6999822..eab9ceb450efd 100644
--- a/arch/um/include/asm/common.lds.S
+++ b/arch/um/include/asm/common.lds.S
@@ -52,6 +52,10 @@
 	CON_INITCALL
   }
 
+  .kunit_test_suites : {
+	KUNIT_TEST_SUITES
+  }
+
   .exitcall : {
 	__exitcall_begin = .;
 	*(.exitcall.exit)
-- 
2.25.0.341.g760bfbb309-goog


^ permalink raw reply related	[flat|nested] 15+ messages in thread

* [PATCH v1 3/7] kunit: test: create a single centralized executor for all tests
  2020-01-28  7:19 [PATCH v1 0/7] kunit: create a centralized executor to dispatch all KUnit tests Brendan Higgins
  2020-01-28  7:19 ` [PATCH v1 1/7] vmlinux.lds.h: add linker section for KUnit test suites Brendan Higgins
  2020-01-28  7:19 ` [PATCH v1 2/7] arch: um: " Brendan Higgins
@ 2020-01-28  7:19 ` Brendan Higgins
  2020-01-29  6:38   ` Stephen Boyd
  2020-01-28  7:19 ` [PATCH v1 4/7] init: main: add KUnit to kernel init Brendan Higgins
                   ` (3 subsequent siblings)
  6 siblings, 1 reply; 15+ messages in thread
From: Brendan Higgins @ 2020-01-28  7:19 UTC (permalink / raw)
  To: jdike, richard, anton.ivanov, arnd, keescook, skhan,
	alan.maguire, yzaikin, davidgow, akpm, rppt, frowand.list
  Cc: gregkh, sboyd, logang, mcgrof, knut.omang, linux-um, linux-arch,
	linux-kselftest, kunit-dev, linux-kernel, linux-doc,
	Brendan Higgins

From: Alan Maguire <alan.maguire@oracle.com>

Add a centralized executor to dispatch tests rather than relying on
late_initcall to schedule each test suite separately.  Centralized
execution is for built-in tests only; modules will execute tests
when loaded.

Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Co-developed-by: Iurii Zaikin <yzaikin@google.com>
Signed-off-by: Iurii Zaikin <yzaikin@google.com>
Co-developed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
---
 include/kunit/test.h | 73 +++++++++++++++++++++++++++-----------------
 lib/kunit/Makefile   |  3 +-
 lib/kunit/executor.c | 36 ++++++++++++++++++++++
 3 files changed, 83 insertions(+), 29 deletions(-)
 create mode 100644 lib/kunit/executor.c

diff --git a/include/kunit/test.h b/include/kunit/test.h
index 2dfb550c6723a..8a02f93a6b505 100644
--- a/include/kunit/test.h
+++ b/include/kunit/test.h
@@ -197,46 +197,63 @@ void kunit_init_test(struct kunit *test, const char *name);
 
 int kunit_run_tests(struct kunit_suite *suite);
 
-/**
- * kunit_test_suites() - used to register one or more &struct kunit_suite
- *			 with KUnit.
- *
- * @suites: a statically allocated list of &struct kunit_suite.
- *
- * Registers @suites with the test framework. See &struct kunit_suite for
- * more information.
- *
- * When builtin,  KUnit tests are all run as late_initcalls; this means
- * that they cannot test anything where tests must run at a different init
- * phase. One significant restriction resulting from this is that KUnit
- * cannot reliably test anything that is initialize in the late_init phase;
- * another is that KUnit is useless to test things that need to be run in
- * an earlier init phase.
- *
- * An alternative is to build the tests as a module.  Because modules
- * do not support multiple late_initcall()s, we need to initialize an
- * array of suites for a module.
- *
- * TODO(brendanhiggins@google.com): Don't run all KUnit tests as
- * late_initcalls.  I have some future work planned to dispatch all KUnit
- * tests from the same place, and at the very least to do so after
- * everything else is definitely initialized.
+/*
+ * If a test suite is built-in, module_init() gets translated into
+ * an initcall which we don't want as the idea is that for builtins
+ * the executor will manage execution.  So ensure we do not define
+ * module_{init|exit} functions for the builtin case when registering
+ * suites via kunit_test_suites() below.
  */
-#define kunit_test_suites(...)						\
-	static struct kunit_suite *suites[] = { __VA_ARGS__, NULL};	\
-	static int kunit_test_suites_init(void)				\
+#ifdef MODULE
+#define kunit_test_suites_for_module(__suites)				\
+	static int __init kunit_test_suites_init(void)			\
 	{								\
+		struct kunit_suite *suites[] = (__suites);		\
 		unsigned int i;						\
+									\
 		for (i = 0; suites[i] != NULL; i++)			\
 			kunit_run_tests(suites[i]);			\
 		return 0;						\
 	}								\
-	late_initcall(kunit_test_suites_init);				\
+	module_init(kunit_test_suites_init);				\
+									\
 	static void __exit kunit_test_suites_exit(void)			\
 	{								\
 		return;							\
 	}								\
 	module_exit(kunit_test_suites_exit)
+#else
+#define kunit_test_suites_for_module(__suites)
+#endif /* MODULE */
+
+#define __kunit_test_suites(unique_array, unique_suites, ...)		       \
+	static struct kunit_suite *unique_array[] = { __VA_ARGS__, NULL };     \
+	kunit_test_suites_for_module(unique_array);			       \
+	static struct kunit_suite **unique_suites			       \
+	__used __aligned(8) __section(.kunit_test_suites) = unique_array
+
+/**
+ * kunit_test_suites() - used to register one or more &struct kunit_suite
+ *			 with KUnit.
+ *
+ * @suites: a statically allocated list of &struct kunit_suite.
+ *
+ * Registers @suites with the test framework. See &struct kunit_suite for
+ * more information.
+ *
+ * When builtin,  KUnit tests are all run via executor; this is done
+ * by placing the array of struct kunit_suite * in the .kunit_test_suites
+ * ELF section.
+ *
+ * An alternative is to build the tests as a module.  Because modules do not
+ * support multiple initcall()s, we need to initialize an array of suites for a
+ * module.
+ *
+ */
+#define kunit_test_suites(...)						\
+	__kunit_test_suites(__UNIQUE_ID(array),				\
+			    __UNIQUE_ID(suites),			\
+			    __VA_ARGS__)
 
 #define kunit_test_suite(suite)	kunit_test_suites(&suite)
 
diff --git a/lib/kunit/Makefile b/lib/kunit/Makefile
index fab55649b69a5..c282f02ca066b 100644
--- a/lib/kunit/Makefile
+++ b/lib/kunit/Makefile
@@ -3,7 +3,8 @@ obj-$(CONFIG_KUNIT) +=			kunit.o
 kunit-objs +=				test.o \
 					string-stream.o \
 					assert.o \
-					try-catch.o
+					try-catch.o \
+					executor.o
 
 obj-$(CONFIG_KUNIT_TEST) +=		kunit-test.o
 
diff --git a/lib/kunit/executor.c b/lib/kunit/executor.c
new file mode 100644
index 0000000000000..6429927d598a5
--- /dev/null
+++ b/lib/kunit/executor.c
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <kunit/test.h>
+
+/*
+ * These symbols point to the .kunit_test_suites section and are defined in
+ * include/asm-generic/vmlinux.lds.h, and consequently must be extern.
+ */
+extern struct kunit_suite * const * const __kunit_suites_start[];
+extern struct kunit_suite * const * const __kunit_suites_end[];
+
+#if IS_BUILTIN(CONFIG_KUNIT)
+
+static int kunit_run_all_tests(void)
+{
+	struct kunit_suite * const * const *suites, * const *subsuite;
+	bool has_test_failed = false;
+
+	for (suites = __kunit_suites_start;
+	     suites < __kunit_suites_end;
+	     suites++) {
+		for (subsuite = *suites; *subsuite != NULL; subsuite++) {
+			if (kunit_run_tests(*subsuite))
+				has_test_failed = true;
+		}
+	}
+
+	if (has_test_failed)
+		return -EFAULT;
+
+	return 0;
+}
+
+late_initcall(kunit_run_all_tests);
+
+#endif /* IS_BUILTIN(CONFIG_KUNIT) */
-- 
2.25.0.341.g760bfbb309-goog


^ permalink raw reply related	[flat|nested] 15+ messages in thread

* [PATCH v1 4/7] init: main: add KUnit to kernel init
  2020-01-28  7:19 [PATCH v1 0/7] kunit: create a centralized executor to dispatch all KUnit tests Brendan Higgins
                   ` (2 preceding siblings ...)
  2020-01-28  7:19 ` [PATCH v1 3/7] kunit: test: create a single centralized executor for all tests Brendan Higgins
@ 2020-01-28  7:19 ` Brendan Higgins
  2020-01-29  6:38   ` Stephen Boyd
  2020-01-28  7:20 ` [PATCH v1 5/7] kunit: test: add test plan to KUnit TAP format Brendan Higgins
                   ` (2 subsequent siblings)
  6 siblings, 1 reply; 15+ messages in thread
From: Brendan Higgins @ 2020-01-28  7:19 UTC (permalink / raw)
  To: jdike, richard, anton.ivanov, arnd, keescook, skhan,
	alan.maguire, yzaikin, davidgow, akpm, rppt, frowand.list
  Cc: gregkh, sboyd, logang, mcgrof, knut.omang, linux-um, linux-arch,
	linux-kselftest, kunit-dev, linux-kernel, linux-doc,
	Brendan Higgins

Remove KUnit from init calls entirely, instead call directly from
kernel_init().

Co-developed-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
---
 include/kunit/test.h | 9 +++++++++
 init/main.c          | 4 ++++
 lib/kunit/executor.c | 4 +---
 3 files changed, 14 insertions(+), 3 deletions(-)

diff --git a/include/kunit/test.h b/include/kunit/test.h
index 8a02f93a6b505..8689dd1459844 100644
--- a/include/kunit/test.h
+++ b/include/kunit/test.h
@@ -197,6 +197,15 @@ void kunit_init_test(struct kunit *test, const char *name);
 
 int kunit_run_tests(struct kunit_suite *suite);
 
+#if IS_BUILTIN(CONFIG_KUNIT)
+int kunit_run_all_tests(void);
+#else
+static inline int kunit_run_all_tests(void)
+{
+	return 0;
+}
+#endif /* IS_BUILTIN(CONFIG_KUNIT) */
+
 /*
  * If a test suite is built-in, module_init() gets translated into
  * an initcall which we don't want as the idea is that for builtins
diff --git a/init/main.c b/init/main.c
index 2cd736059416f..90301d4fbd1bb 100644
--- a/init/main.c
+++ b/init/main.c
@@ -103,6 +103,8 @@
 #define CREATE_TRACE_POINTS
 #include <trace/events/initcall.h>
 
+#include <kunit/test.h>
+
 static int kernel_init(void *);
 
 extern void init_IRQ(void);
@@ -1201,6 +1203,8 @@ static noinline void __init kernel_init_freeable(void)
 
 	do_basic_setup();
 
+	kunit_run_all_tests();
+
 	console_on_rootfs();
 
 	/*
diff --git a/lib/kunit/executor.c b/lib/kunit/executor.c
index 6429927d598a5..b75a46c560847 100644
--- a/lib/kunit/executor.c
+++ b/lib/kunit/executor.c
@@ -11,7 +11,7 @@ extern struct kunit_suite * const * const __kunit_suites_end[];
 
 #if IS_BUILTIN(CONFIG_KUNIT)
 
-static int kunit_run_all_tests(void)
+int kunit_run_all_tests(void)
 {
 	struct kunit_suite * const * const *suites, * const *subsuite;
 	bool has_test_failed = false;
@@ -31,6 +31,4 @@ static int kunit_run_all_tests(void)
 	return 0;
 }
 
-late_initcall(kunit_run_all_tests);
-
 #endif /* IS_BUILTIN(CONFIG_KUNIT) */
-- 
2.25.0.341.g760bfbb309-goog


^ permalink raw reply related	[flat|nested] 15+ messages in thread

* [PATCH v1 5/7] kunit: test: add test plan to KUnit TAP format
  2020-01-28  7:19 [PATCH v1 0/7] kunit: create a centralized executor to dispatch all KUnit tests Brendan Higgins
                   ` (3 preceding siblings ...)
  2020-01-28  7:19 ` [PATCH v1 4/7] init: main: add KUnit to kernel init Brendan Higgins
@ 2020-01-28  7:20 ` Brendan Higgins
  2020-01-28  7:20 ` [PATCH v1 6/7] kunit: Add 'kunit_shutdown' option Brendan Higgins
  2020-01-28  7:20 ` [PATCH v1 7/7] Documentation: Add kunit_shutdown to kernel-parameters.txt Brendan Higgins
  6 siblings, 0 replies; 15+ messages in thread
From: Brendan Higgins @ 2020-01-28  7:20 UTC (permalink / raw)
  To: jdike, richard, anton.ivanov, arnd, keescook, skhan,
	alan.maguire, yzaikin, davidgow, akpm, rppt, frowand.list
  Cc: gregkh, sboyd, logang, mcgrof, knut.omang, linux-um, linux-arch,
	linux-kselftest, kunit-dev, linux-kernel, linux-doc,
	Brendan Higgins

TAP 14 allows an optional test plan to be emitted before the start of
the start of testing[1]; this is valuable because it makes it possible
for a test harness to detect whether the number of tests run matches the
number of tests expected to be run, ensuring that no tests silently
failed.

Link[1]: https://github.com/isaacs/testanything.github.io/blob/tap14/tap-version-14-specification.md#the-plan
Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
---
 lib/kunit/executor.c                          | 17 +++++
 lib/kunit/test.c                              | 11 ---
 tools/testing/kunit/kunit_parser.py           | 74 ++++++++++++++++---
 .../test_is_test_passed-all_passed.log        |  1 +
 .../test_data/test_is_test_passed-crash.log   |  1 +
 .../test_data/test_is_test_passed-failure.log |  1 +
 6 files changed, 82 insertions(+), 23 deletions(-)

diff --git a/lib/kunit/executor.c b/lib/kunit/executor.c
index b75a46c560847..7fd16feff157e 100644
--- a/lib/kunit/executor.c
+++ b/lib/kunit/executor.c
@@ -11,11 +11,28 @@ extern struct kunit_suite * const * const __kunit_suites_end[];
 
 #if IS_BUILTIN(CONFIG_KUNIT)
 
+static void kunit_print_tap_header(void)
+{
+	struct kunit_suite * const * const *suites, * const *subsuite;
+	int num_of_suites = 0;
+
+	for (suites = __kunit_suites_start;
+	     suites < __kunit_suites_end;
+	     suites++)
+		for (subsuite = *suites; *subsuite != NULL; subsuite++)
+			num_of_suites++;
+
+	pr_info("TAP version 14\n");
+	pr_info("1..%d\n", num_of_suites);
+}
+
 int kunit_run_all_tests(void)
 {
 	struct kunit_suite * const * const *suites, * const *subsuite;
 	bool has_test_failed = false;
 
+	kunit_print_tap_header();
+
 	for (suites = __kunit_suites_start;
 	     suites < __kunit_suites_end;
 	     suites++) {
diff --git a/lib/kunit/test.c b/lib/kunit/test.c
index 9242f932896c7..da56b94261b43 100644
--- a/lib/kunit/test.c
+++ b/lib/kunit/test.c
@@ -18,16 +18,6 @@ static void kunit_set_failure(struct kunit *test)
 	WRITE_ONCE(test->success, false);
 }
 
-static void kunit_print_tap_version(void)
-{
-	static bool kunit_has_printed_tap_version;
-
-	if (!kunit_has_printed_tap_version) {
-		pr_info("TAP version 14\n");
-		kunit_has_printed_tap_version = true;
-	}
-}
-
 static size_t kunit_test_cases_len(struct kunit_case *test_cases)
 {
 	struct kunit_case *test_case;
@@ -41,7 +31,6 @@ static size_t kunit_test_cases_len(struct kunit_case *test_cases)
 
 static void kunit_print_subtest_start(struct kunit_suite *suite)
 {
-	kunit_print_tap_version();
 	pr_info("\t# Subtest: %s\n", suite->name);
 	pr_info("\t1..%zd\n", kunit_test_cases_len(suite->test_cases));
 }
diff --git a/tools/testing/kunit/kunit_parser.py b/tools/testing/kunit/kunit_parser.py
index 4ffbae0f67325..78b3bdd03b1e4 100644
--- a/tools/testing/kunit/kunit_parser.py
+++ b/tools/testing/kunit/kunit_parser.py
@@ -45,6 +45,7 @@ class TestStatus(Enum):
 	FAILURE = auto()
 	TEST_CRASHED = auto()
 	NO_TESTS = auto()
+	FAILURE_TO_PARSE_TESTS = auto()
 
 kunit_start_re = re.compile(r'^TAP version [0-9]+$')
 kunit_end_re = re.compile('List of all partitions:')
@@ -106,7 +107,7 @@ OkNotOkResult = namedtuple('OkNotOkResult', ['is_ok','description', 'text'])
 
 OK_NOT_OK_SUBTEST = re.compile(r'^\t(ok|not ok) [0-9]+ - (.*)$')
 
-OK_NOT_OK_MODULE = re.compile(r'^(ok|not ok) [0-9]+ - (.*)$')
+OK_NOT_OK_MODULE = re.compile(r'^(ok|not ok) ([0-9]+) - (.*)$')
 
 def parse_ok_not_ok_test_case(lines: List[str],
 			      test_case: TestCase,
@@ -196,7 +197,9 @@ def max_status(left: TestStatus, right: TestStatus) -> TestStatus:
 	else:
 		return TestStatus.SUCCESS
 
-def parse_ok_not_ok_test_suite(lines: List[str], test_suite: TestSuite) -> bool:
+def parse_ok_not_ok_test_suite(lines: List[str],
+			       test_suite: TestSuite,
+			       expected_suite_index: int) -> bool:
 	consume_non_diagnositic(lines)
 	if not lines:
 		test_suite.status = TestStatus.TEST_CRASHED
@@ -209,6 +212,12 @@ def parse_ok_not_ok_test_suite(lines: List[str], test_suite: TestSuite) -> bool:
 			test_suite.status = TestStatus.SUCCESS
 		else:
 			test_suite.status = TestStatus.FAILURE
+		suite_index = int(match.group(2))
+		if suite_index != expected_suite_index:
+			print_with_timestamp(
+				red('[ERROR] ') + 'expected_suite_index ' +
+				str(expected_suite_index) + ', but got ' +
+				str(suite_index))
 		return True
 	else:
 		return False
@@ -221,7 +230,7 @@ def bubble_up_test_case_errors(test_suite: TestSuite) -> TestStatus:
 	max_test_case_status = bubble_up_errors(lambda x: x.status, test_suite.cases)
 	return max_status(max_test_case_status, test_suite.status)
 
-def parse_test_suite(lines: List[str]) -> TestSuite:
+def parse_test_suite(lines: List[str], expected_suite_index: int) -> TestSuite:
 	if not lines:
 		return None
 	consume_non_diagnositic(lines)
@@ -240,7 +249,7 @@ def parse_test_suite(lines: List[str]) -> TestSuite:
 		test_suite.cases.append(test_case)
 		test_case = parse_test_case(lines, expected_test_case_num > 0)
 		expected_test_case_num -= 1
-	if parse_ok_not_ok_test_suite(lines, test_suite):
+	if parse_ok_not_ok_test_suite(lines, test_suite, expected_suite_index):
 		test_suite.status = bubble_up_test_case_errors(test_suite)
 		return test_suite
 	elif not lines:
@@ -260,6 +269,17 @@ def parse_tap_header(lines: List[str]) -> bool:
 	else:
 		return False
 
+TEST_PLAN = re.compile(r'[0-9]+\.\.([0-9]+)')
+
+def parse_test_plan(lines: List[str]) -> int:
+	consume_non_diagnositic(lines)
+	match = TEST_PLAN.match(lines[0])
+	if match:
+		lines.pop(0)
+		return int(match.group(1))
+	else:
+		return None
+
 def bubble_up_suite_errors(test_suite_list: List[TestSuite]) -> TestStatus:
 	return bubble_up_errors(lambda x: x.status, test_suite_list)
 
@@ -268,19 +288,34 @@ def parse_test_result(lines: List[str]) -> TestResult:
 		return TestResult(TestStatus.NO_TESTS, [], lines)
 	consume_non_diagnositic(lines)
 	if not parse_tap_header(lines):
-		return None
+		return TestResult(TestStatus.NO_TESTS, [], lines)
+	expected_test_suite_num = parse_test_plan(lines)
+	if not expected_test_suite_num:
+		return TestResult(TestStatus.FAILURE_TO_PARSE_TESTS, [], lines)
 	test_suites = []
-	test_suite = parse_test_suite(lines)
-	while test_suite:
-		test_suites.append(test_suite)
-		test_suite = parse_test_suite(lines)
-	return TestResult(bubble_up_suite_errors(test_suites), test_suites, lines)
+	for i in range(1, expected_test_suite_num + 1):
+		test_suite = parse_test_suite(lines, i)
+		if test_suite:
+			test_suites.append(test_suite)
+		else:
+			print_with_timestamp(
+				red('[ERROR] ') + ' expected ' +
+				str(expected_test_suite_num) +
+				' test suites, but got ' + str(i - 2))
+			break
+	test_suite = parse_test_suite(lines, -1)
+	if test_suite:
+		print_with_timestamp(red('[ERROR] ') +
+			'got unexpected test suite: ' + test_suite.name)
+	if test_suites:
+		return TestResult(bubble_up_suite_errors(test_suites), test_suites, lines)
+	else:
+		return TestResult(TestStatus.NO_TESTS, [], lines)
 
-def parse_run_tests(kernel_output) -> TestResult:
+def print_and_count_results(test_result: TestResult) -> None:
 	total_tests = 0
 	failed_tests = 0
 	crashed_tests = 0
-	test_result = parse_test_result(list(isolate_kunit_output(kernel_output)))
 	for test_suite in test_result.suites:
 		if test_suite.status == TestStatus.SUCCESS:
 			print_suite_divider(green('[PASSED] ') + test_suite.name)
@@ -302,6 +337,21 @@ def parse_run_tests(kernel_output) -> TestResult:
 				print_with_timestamp(red('[FAILED] ') + test_case.name)
 				print_log(map(yellow, test_case.log))
 				print_with_timestamp('')
+	return total_tests, failed_tests, crashed_tests
+
+def parse_run_tests(kernel_output) -> TestResult:
+	total_tests = 0
+	failed_tests = 0
+	crashed_tests = 0
+	test_result = parse_test_result(list(isolate_kunit_output(kernel_output)))
+	if test_result.status == TestStatus.NO_TESTS:
+		print(red('[ERROR] ') + yellow('no tests run!'))
+	elif test_result.status == TestStatus.FAILURE_TO_PARSE_TESTS:
+		print(red('[ERROR] ') + yellow('could not parse test results!'))
+	else:
+		(total_tests,
+		 failed_tests,
+		 crashed_tests) = print_and_count_results(test_result)
 	print_with_timestamp(DIVIDER)
 	fmt = green if test_result.status == TestStatus.SUCCESS else red
 	print_with_timestamp(
diff --git a/tools/testing/kunit/test_data/test_is_test_passed-all_passed.log b/tools/testing/kunit/test_data/test_is_test_passed-all_passed.log
index 62ebc0288355c..bc0dc8fe35b76 100644
--- a/tools/testing/kunit/test_data/test_is_test_passed-all_passed.log
+++ b/tools/testing/kunit/test_data/test_is_test_passed-all_passed.log
@@ -1,4 +1,5 @@
 TAP version 14
+1..2
 	# Subtest: sysctl_test
 	1..8
 	# sysctl_test_dointvec_null_tbl_data: sysctl_test_dointvec_null_tbl_data passed
diff --git a/tools/testing/kunit/test_data/test_is_test_passed-crash.log b/tools/testing/kunit/test_data/test_is_test_passed-crash.log
index 0b249870c8be4..4d97f6708c4a5 100644
--- a/tools/testing/kunit/test_data/test_is_test_passed-crash.log
+++ b/tools/testing/kunit/test_data/test_is_test_passed-crash.log
@@ -1,6 +1,7 @@
 printk: console [tty0] enabled
 printk: console [mc-1] enabled
 TAP version 14
+1..2
 	# Subtest: sysctl_test
 	1..8
 	# sysctl_test_dointvec_null_tbl_data: sysctl_test_dointvec_null_tbl_data passed
diff --git a/tools/testing/kunit/test_data/test_is_test_passed-failure.log b/tools/testing/kunit/test_data/test_is_test_passed-failure.log
index 9e89d32d5667a..7a416497e3bec 100644
--- a/tools/testing/kunit/test_data/test_is_test_passed-failure.log
+++ b/tools/testing/kunit/test_data/test_is_test_passed-failure.log
@@ -1,4 +1,5 @@
 TAP version 14
+1..2
 	# Subtest: sysctl_test
 	1..8
 	# sysctl_test_dointvec_null_tbl_data: sysctl_test_dointvec_null_tbl_data passed
-- 
2.25.0.341.g760bfbb309-goog


^ permalink raw reply related	[flat|nested] 15+ messages in thread

* [PATCH v1 6/7] kunit: Add 'kunit_shutdown' option
  2020-01-28  7:19 [PATCH v1 0/7] kunit: create a centralized executor to dispatch all KUnit tests Brendan Higgins
                   ` (4 preceding siblings ...)
  2020-01-28  7:20 ` [PATCH v1 5/7] kunit: test: add test plan to KUnit TAP format Brendan Higgins
@ 2020-01-28  7:20 ` Brendan Higgins
  2020-01-29  6:33   ` Stephen Boyd
  2020-01-28  7:20 ` [PATCH v1 7/7] Documentation: Add kunit_shutdown to kernel-parameters.txt Brendan Higgins
  6 siblings, 1 reply; 15+ messages in thread
From: Brendan Higgins @ 2020-01-28  7:20 UTC (permalink / raw)
  To: jdike, richard, anton.ivanov, arnd, keescook, skhan,
	alan.maguire, yzaikin, davidgow, akpm, rppt, frowand.list
  Cc: gregkh, sboyd, logang, mcgrof, knut.omang, linux-um, linux-arch,
	linux-kselftest, kunit-dev, linux-kernel, linux-doc,
	Brendan Higgins

From: David Gow <davidgow@google.com>

Add a new kernel command-line option, 'kunit_shutdown', which allows the
user to specify that the kernel poweroff, halt, or reboot after
completing all KUnit tests; this is very handy for running KUnit tests
on UML or a VM so that the UML/VM process exits cleanly immediately
after running all tests without needing a special initramfs.

Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
---
 lib/kunit/executor.c                | 20 ++++++++++++++++++++
 tools/testing/kunit/kunit_kernel.py |  2 +-
 tools/testing/kunit/kunit_parser.py |  2 +-
 3 files changed, 22 insertions(+), 2 deletions(-)

diff --git a/lib/kunit/executor.c b/lib/kunit/executor.c
index 7fd16feff157e..d3ec1265a72fd 100644
--- a/lib/kunit/executor.c
+++ b/lib/kunit/executor.c
@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 
 #include <kunit/test.h>
+#include <linux/reboot.h>
 
 /*
  * These symbols point to the .kunit_test_suites section and are defined in
@@ -11,6 +12,23 @@ extern struct kunit_suite * const * const __kunit_suites_end[];
 
 #if IS_BUILTIN(CONFIG_KUNIT)
 
+static char *kunit_shutdown;
+core_param(kunit_shutdown, kunit_shutdown, charp, 0644);
+
+static void kunit_handle_shutdown(void)
+{
+	if (!kunit_shutdown)
+		return;
+
+	if (!strcmp(kunit_shutdown, "poweroff")) {
+		kernel_power_off();
+	} else if (!strcmp(kunit_shutdown, "halt")) {
+		kernel_halt();
+	} else if (!strcmp(kunit_shutdown, "reboot")) {
+		kernel_restart(NULL);
+	}
+}
+
 static void kunit_print_tap_header(void)
 {
 	struct kunit_suite * const * const *suites, * const *subsuite;
@@ -42,6 +60,8 @@ int kunit_run_all_tests(void)
 		}
 	}
 
+	kunit_handle_shutdown();
+
 	if (has_test_failed)
 		return -EFAULT;
 
diff --git a/tools/testing/kunit/kunit_kernel.py b/tools/testing/kunit/kunit_kernel.py
index cc5d844ecca13..43314aa537d30 100644
--- a/tools/testing/kunit/kunit_kernel.py
+++ b/tools/testing/kunit/kunit_kernel.py
@@ -141,7 +141,7 @@ class LinuxSourceTree(object):
 		return True
 
 	def run_kernel(self, args=[], timeout=None, build_dir=''):
-		args.extend(['mem=256M'])
+		args.extend(['mem=256M', 'kunit_shutdown=halt'])
 		process = self._ops.linux_bin(args, timeout, build_dir)
 		with open(os.path.join(build_dir, 'test.log'), 'w') as f:
 			for line in process.stdout:
diff --git a/tools/testing/kunit/kunit_parser.py b/tools/testing/kunit/kunit_parser.py
index 78b3bdd03b1e4..633811dd9bce8 100644
--- a/tools/testing/kunit/kunit_parser.py
+++ b/tools/testing/kunit/kunit_parser.py
@@ -48,7 +48,7 @@ class TestStatus(Enum):
 	FAILURE_TO_PARSE_TESTS = auto()
 
 kunit_start_re = re.compile(r'^TAP version [0-9]+$')
-kunit_end_re = re.compile('List of all partitions:')
+kunit_end_re = re.compile(r'reboot: System halted')
 
 def isolate_kunit_output(kernel_output):
 	started = False
-- 
2.25.0.341.g760bfbb309-goog


^ permalink raw reply related	[flat|nested] 15+ messages in thread

* [PATCH v1 7/7] Documentation: Add kunit_shutdown to kernel-parameters.txt
  2020-01-28  7:19 [PATCH v1 0/7] kunit: create a centralized executor to dispatch all KUnit tests Brendan Higgins
                   ` (5 preceding siblings ...)
  2020-01-28  7:20 ` [PATCH v1 6/7] kunit: Add 'kunit_shutdown' option Brendan Higgins
@ 2020-01-28  7:20 ` Brendan Higgins
  2020-01-29  6:27   ` Stephen Boyd
  6 siblings, 1 reply; 15+ messages in thread
From: Brendan Higgins @ 2020-01-28  7:20 UTC (permalink / raw)
  To: jdike, richard, anton.ivanov, arnd, keescook, skhan,
	alan.maguire, yzaikin, davidgow, akpm, rppt, frowand.list
  Cc: gregkh, sboyd, logang, mcgrof, knut.omang, linux-um, linux-arch,
	linux-kselftest, kunit-dev, linux-kernel, linux-doc,
	Brendan Higgins

Add kunit_shutdown, an option to specify that the kernel shutsdown after
running KUnit tests, to the kernel-parameters.txt documentation.

Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
---
 Documentation/admin-guide/kernel-parameters.txt | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index ade4e6ec23e03..0472b02ce16bb 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -2054,6 +2054,13 @@
 			0: force disabled
 			1: force enabled
 
+	kunit_shutdown	[KERNEL UNIT TESTING FRAMEWORK] Shutdown kernel after
+			running tests.
+			Default:	(flag not present) don't shutdown
+			poweroff:	poweroff the kernel after running tests.
+			halt:		halt the kernel after running tests.
+			reboot:		reboot the kernel after running tests.
+
 	kvm.ignore_msrs=[KVM] Ignore guest accesses to unhandled MSRs.
 			Default is 0 (don't ignore, but inject #GP)
 
-- 
2.25.0.341.g760bfbb309-goog


^ permalink raw reply related	[flat|nested] 15+ messages in thread

* Re: [PATCH v1 7/7] Documentation: Add kunit_shutdown to kernel-parameters.txt
  2020-01-28  7:20 ` [PATCH v1 7/7] Documentation: Add kunit_shutdown to kernel-parameters.txt Brendan Higgins
@ 2020-01-29  6:27   ` Stephen Boyd
  2020-01-30 23:04     ` Brendan Higgins
  0 siblings, 1 reply; 15+ messages in thread
From: Stephen Boyd @ 2020-01-29  6:27 UTC (permalink / raw)
  To: Brendan Higgins, akpm, alan.maguire, anton.ivanov, arnd,
	davidgow, frowand.list, jdike, keescook, richard, rppt, skhan,
	yzaikin
  Cc: gregkh, logang, mcgrof, knut.omang, linux-um, linux-arch,
	linux-kselftest, kunit-dev, linux-kernel, linux-doc,
	Brendan Higgins

Quoting Brendan Higgins (2020-01-27 23:20:02)
> Add kunit_shutdown, an option to specify that the kernel shutsdown after
> running KUnit tests, to the kernel-parameters.txt documentation.
> 
> Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
> ---
>  Documentation/admin-guide/kernel-parameters.txt | 7 +++++++
>  1 file changed, 7 insertions(+)
> 
> diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
> index ade4e6ec23e03..0472b02ce16bb 100644
> --- a/Documentation/admin-guide/kernel-parameters.txt
> +++ b/Documentation/admin-guide/kernel-parameters.txt
> @@ -2054,6 +2054,13 @@
>                         0: force disabled
>                         1: force enabled
>  
> +       kunit_shutdown  [KERNEL UNIT TESTING FRAMEWORK] Shutdown kernel after
> +                       running tests.
> +                       Default:        (flag not present) don't shutdown
> +                       poweroff:       poweroff the kernel after running tests.
> +                       halt:           halt the kernel after running tests.
> +                       reboot:         reboot the kernel after running tests.

Maybe drop the full stops on the short descriptions.

Otherwise,

Reviewed-by: Stephen Boyd <sboyd@kernel.org>


^ permalink raw reply	[flat|nested] 15+ messages in thread

* Re: [PATCH v1 6/7] kunit: Add 'kunit_shutdown' option
  2020-01-28  7:20 ` [PATCH v1 6/7] kunit: Add 'kunit_shutdown' option Brendan Higgins
@ 2020-01-29  6:33   ` Stephen Boyd
  2020-01-30 22:56     ` Brendan Higgins
  0 siblings, 1 reply; 15+ messages in thread
From: Stephen Boyd @ 2020-01-29  6:33 UTC (permalink / raw)
  To: Brendan Higgins, akpm, alan.maguire, anton.ivanov, arnd,
	davidgow, frowand.list, jdike, keescook, richard, rppt, skhan,
	yzaikin
  Cc: gregkh, logang, mcgrof, knut.omang, linux-um, linux-arch,
	linux-kselftest, kunit-dev, linux-kernel, linux-doc,
	Brendan Higgins

Quoting Brendan Higgins (2020-01-27 23:20:01)
> From: David Gow <davidgow@google.com>
> 
> Add a new kernel command-line option, 'kunit_shutdown', which allows the
> user to specify that the kernel poweroff, halt, or reboot after
> completing all KUnit tests; this is very handy for running KUnit tests
> on UML or a VM so that the UML/VM process exits cleanly immediately
> after running all tests without needing a special initramfs.
> 
> Signed-off-by: David Gow <davidgow@google.com>
> Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
> ---

Two nitpicks below

Reviewed-by: Stephen Boyd <sboyd@kernel.org>

> diff --git a/lib/kunit/executor.c b/lib/kunit/executor.c
> index 7fd16feff157e..d3ec1265a72fd 100644
> --- a/lib/kunit/executor.c
> +++ b/lib/kunit/executor.c
> @@ -1,6 +1,7 @@
>  // SPDX-License-Identifier: GPL-2.0
>  
>  #include <kunit/test.h>
> +#include <linux/reboot.h>

Should this include come before kunit/test.h? I imagine the order of
includes would be linux, kunit, local?

>  
>  /*
>   * These symbols point to the .kunit_test_suites section and are defined in
> @@ -11,6 +12,23 @@ extern struct kunit_suite * const * const __kunit_suites_end[];
>  
>  #if IS_BUILTIN(CONFIG_KUNIT)
>  
> +static char *kunit_shutdown;
> +core_param(kunit_shutdown, kunit_shutdown, charp, 0644);
> +
> +static void kunit_handle_shutdown(void)
> +{
> +       if (!kunit_shutdown)
> +               return;
> +
> +       if (!strcmp(kunit_shutdown, "poweroff")) {
> +               kernel_power_off();
> +       } else if (!strcmp(kunit_shutdown, "halt")) {
> +               kernel_halt();
> +       } else if (!strcmp(kunit_shutdown, "reboot")) {
> +               kernel_restart(NULL);
> +       }

Kernel style would be to not have braces on single line if statements.

> +}
> +
>  static void kunit_print_tap_header(void)
>  {
>         struct kunit_suite * const * const *suites, * const *subsuite;

^ permalink raw reply	[flat|nested] 15+ messages in thread

* Re: [PATCH v1 3/7] kunit: test: create a single centralized executor for all tests
  2020-01-28  7:19 ` [PATCH v1 3/7] kunit: test: create a single centralized executor for all tests Brendan Higgins
@ 2020-01-29  6:38   ` Stephen Boyd
  0 siblings, 0 replies; 15+ messages in thread
From: Stephen Boyd @ 2020-01-29  6:38 UTC (permalink / raw)
  To: Brendan Higgins, akpm, alan.maguire, anton.ivanov, arnd,
	davidgow, frowand.list, jdike, keescook, richard, rppt, skhan,
	yzaikin
  Cc: gregkh, logang, mcgrof, knut.omang, linux-um, linux-arch,
	linux-kselftest, kunit-dev, linux-kernel, linux-doc,
	Brendan Higgins

Quoting Brendan Higgins (2020-01-27 23:19:58)
> From: Alan Maguire <alan.maguire@oracle.com>
> 
> Add a centralized executor to dispatch tests rather than relying on
> late_initcall to schedule each test suite separately.  Centralized
> execution is for built-in tests only; modules will execute tests
> when loaded.
> 
> Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
> Co-developed-by: Iurii Zaikin <yzaikin@google.com>
> Signed-off-by: Iurii Zaikin <yzaikin@google.com>
> Co-developed-by: Brendan Higgins <brendanhiggins@google.com>
> Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
> ---

Reviewed-by: Stephen Boyd <sboyd@kernel.org>


^ permalink raw reply	[flat|nested] 15+ messages in thread

* Re: [PATCH v1 4/7] init: main: add KUnit to kernel init
  2020-01-28  7:19 ` [PATCH v1 4/7] init: main: add KUnit to kernel init Brendan Higgins
@ 2020-01-29  6:38   ` Stephen Boyd
  2020-01-30 22:50     ` Brendan Higgins
  0 siblings, 1 reply; 15+ messages in thread
From: Stephen Boyd @ 2020-01-29  6:38 UTC (permalink / raw)
  To: Brendan Higgins, akpm, alan.maguire, anton.ivanov, arnd,
	davidgow, frowand.list, jdike, keescook, richard, rppt, skhan,
	yzaikin
  Cc: gregkh, logang, mcgrof, knut.omang, linux-um, linux-arch,
	linux-kselftest, kunit-dev, linux-kernel, linux-doc,
	Brendan Higgins

Quoting Brendan Higgins (2020-01-27 23:19:59)
> Remove KUnit from init calls entirely, instead call directly from
> kernel_init().
> 
> Co-developed-by: Alan Maguire <alan.maguire@oracle.com>
> Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
> Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
> ---

Reviewed-by: Stephen Boyd <sboyd@kernel.org>

Although, why can't it be squashed with the previous patch?


^ permalink raw reply	[flat|nested] 15+ messages in thread

* Re: [PATCH v1 4/7] init: main: add KUnit to kernel init
  2020-01-29  6:38   ` Stephen Boyd
@ 2020-01-30 22:50     ` Brendan Higgins
  0 siblings, 0 replies; 15+ messages in thread
From: Brendan Higgins @ 2020-01-30 22:50 UTC (permalink / raw)
  To: Stephen Boyd
  Cc: Andrew Morton, Alan Maguire, Anton Ivanov, Arnd Bergmann,
	David Gow, Frank Rowand, Jeff Dike, Kees Cook,
	Richard Weinberger, rppt, Shuah Khan, Iurii Zaikin, Greg KH,
	Logan Gunthorpe, Luis Chamberlain, Knut Omang, linux-um,
	linux-arch, open list:KERNEL SELFTEST FRAMEWORK,
	KUnit Development, Linux Kernel Mailing List,
	open list:DOCUMENTATION

On Tue, Jan 28, 2020 at 10:38 PM Stephen Boyd <sboyd@kernel.org> wrote:
>
> Quoting Brendan Higgins (2020-01-27 23:19:59)
> > Remove KUnit from init calls entirely, instead call directly from
> > kernel_init().
> >
> > Co-developed-by: Alan Maguire <alan.maguire@oracle.com>
> > Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
> > Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
> > ---
>
> Reviewed-by: Stephen Boyd <sboyd@kernel.org>
>
> Although, why can't it be squashed with the previous patch?

I think that this is pretty much the smallest logical change that
doesn't touch just KUnit. I figured it might make it easier for people
not interested in KUnit what changes I am making to init. I assume
that people don't touch init willy-nilly, right?

^ permalink raw reply	[flat|nested] 15+ messages in thread

* Re: [PATCH v1 6/7] kunit: Add 'kunit_shutdown' option
  2020-01-29  6:33   ` Stephen Boyd
@ 2020-01-30 22:56     ` Brendan Higgins
  0 siblings, 0 replies; 15+ messages in thread
From: Brendan Higgins @ 2020-01-30 22:56 UTC (permalink / raw)
  To: Stephen Boyd
  Cc: Andrew Morton, Alan Maguire, Anton Ivanov, Arnd Bergmann,
	David Gow, Frank Rowand, Jeff Dike, Kees Cook,
	Richard Weinberger, rppt, Shuah Khan, Iurii Zaikin, Greg KH,
	Logan Gunthorpe, Luis Chamberlain, Knut Omang, linux-um,
	linux-arch, open list:KERNEL SELFTEST FRAMEWORK,
	KUnit Development, Linux Kernel Mailing List,
	open list:DOCUMENTATION

On Tue, Jan 28, 2020 at 10:33 PM Stephen Boyd <sboyd@kernel.org> wrote:
>
> Quoting Brendan Higgins (2020-01-27 23:20:01)
> > From: David Gow <davidgow@google.com>
> >
> > Add a new kernel command-line option, 'kunit_shutdown', which allows the
> > user to specify that the kernel poweroff, halt, or reboot after
> > completing all KUnit tests; this is very handy for running KUnit tests
> > on UML or a VM so that the UML/VM process exits cleanly immediately
> > after running all tests without needing a special initramfs.
> >
> > Signed-off-by: David Gow <davidgow@google.com>
> > Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
> > ---
>
> Two nitpicks below
>
> Reviewed-by: Stephen Boyd <sboyd@kernel.org>
>
> > diff --git a/lib/kunit/executor.c b/lib/kunit/executor.c
> > index 7fd16feff157e..d3ec1265a72fd 100644
> > --- a/lib/kunit/executor.c
> > +++ b/lib/kunit/executor.c
> > @@ -1,6 +1,7 @@
> >  // SPDX-License-Identifier: GPL-2.0
> >
> >  #include <kunit/test.h>
> > +#include <linux/reboot.h>
>
> Should this include come before kunit/test.h? I imagine the order of
> includes would be linux, kunit, local?

I think some reviewers/maintainers want them all to be alphabetical.
So I have probably done it both ways in the past. Will fix.

> >
> >  /*
> >   * These symbols point to the .kunit_test_suites section and are defined in
> > @@ -11,6 +12,23 @@ extern struct kunit_suite * const * const __kunit_suites_end[];
> >
> >  #if IS_BUILTIN(CONFIG_KUNIT)
> >
> > +static char *kunit_shutdown;
> > +core_param(kunit_shutdown, kunit_shutdown, charp, 0644);
> > +
> > +static void kunit_handle_shutdown(void)
> > +{
> > +       if (!kunit_shutdown)
> > +               return;
> > +
> > +       if (!strcmp(kunit_shutdown, "poweroff")) {
> > +               kernel_power_off();
> > +       } else if (!strcmp(kunit_shutdown, "halt")) {
> > +               kernel_halt();
> > +       } else if (!strcmp(kunit_shutdown, "reboot")) {
> > +               kernel_restart(NULL);
> > +       }
>
> Kernel style would be to not have braces on single line if statements.

Whoops. Sometimes I forget :-)

> > +}
> > +
> >  static void kunit_print_tap_header(void)
> >  {
> >         struct kunit_suite * const * const *suites, * const *subsuite;

Thanks!

^ permalink raw reply	[flat|nested] 15+ messages in thread

* Re: [PATCH v1 7/7] Documentation: Add kunit_shutdown to kernel-parameters.txt
  2020-01-29  6:27   ` Stephen Boyd
@ 2020-01-30 23:04     ` Brendan Higgins
  0 siblings, 0 replies; 15+ messages in thread
From: Brendan Higgins @ 2020-01-30 23:04 UTC (permalink / raw)
  To: Stephen Boyd
  Cc: Andrew Morton, Alan Maguire, Anton Ivanov, Arnd Bergmann,
	David Gow, Frank Rowand, Jeff Dike, Kees Cook,
	Richard Weinberger, rppt, Shuah Khan, Iurii Zaikin, Greg KH,
	Logan Gunthorpe, Luis Chamberlain, Knut Omang, linux-um,
	linux-arch, open list:KERNEL SELFTEST FRAMEWORK,
	KUnit Development, Linux Kernel Mailing List,
	open list:DOCUMENTATION

On Tue, Jan 28, 2020 at 10:27 PM Stephen Boyd <sboyd@kernel.org> wrote:
>
> Quoting Brendan Higgins (2020-01-27 23:20:02)
> > Add kunit_shutdown, an option to specify that the kernel shutsdown after
> > running KUnit tests, to the kernel-parameters.txt documentation.
> >
> > Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
> > ---
> >  Documentation/admin-guide/kernel-parameters.txt | 7 +++++++
> >  1 file changed, 7 insertions(+)
> >
> > diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
> > index ade4e6ec23e03..0472b02ce16bb 100644
> > --- a/Documentation/admin-guide/kernel-parameters.txt
> > +++ b/Documentation/admin-guide/kernel-parameters.txt
> > @@ -2054,6 +2054,13 @@
> >                         0: force disabled
> >                         1: force enabled
> >
> > +       kunit_shutdown  [KERNEL UNIT TESTING FRAMEWORK] Shutdown kernel after
> > +                       running tests.
> > +                       Default:        (flag not present) don't shutdown
> > +                       poweroff:       poweroff the kernel after running tests.
> > +                       halt:           halt the kernel after running tests.
> > +                       reboot:         reboot the kernel after running tests.
>
> Maybe drop the full stops on the short descriptions.

Will fix.

> Otherwise,
>
> Reviewed-by: Stephen Boyd <sboyd@kernel.org>
>

Thanks!

^ permalink raw reply	[flat|nested] 15+ messages in thread

end of thread, other threads:[~2020-01-30 23:05 UTC | newest]

Thread overview: 15+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-01-28  7:19 [PATCH v1 0/7] kunit: create a centralized executor to dispatch all KUnit tests Brendan Higgins
2020-01-28  7:19 ` [PATCH v1 1/7] vmlinux.lds.h: add linker section for KUnit test suites Brendan Higgins
2020-01-28  7:19 ` [PATCH v1 2/7] arch: um: " Brendan Higgins
2020-01-28  7:19 ` [PATCH v1 3/7] kunit: test: create a single centralized executor for all tests Brendan Higgins
2020-01-29  6:38   ` Stephen Boyd
2020-01-28  7:19 ` [PATCH v1 4/7] init: main: add KUnit to kernel init Brendan Higgins
2020-01-29  6:38   ` Stephen Boyd
2020-01-30 22:50     ` Brendan Higgins
2020-01-28  7:20 ` [PATCH v1 5/7] kunit: test: add test plan to KUnit TAP format Brendan Higgins
2020-01-28  7:20 ` [PATCH v1 6/7] kunit: Add 'kunit_shutdown' option Brendan Higgins
2020-01-29  6:33   ` Stephen Boyd
2020-01-30 22:56     ` Brendan Higgins
2020-01-28  7:20 ` [PATCH v1 7/7] Documentation: Add kunit_shutdown to kernel-parameters.txt Brendan Higgins
2020-01-29  6:27   ` Stephen Boyd
2020-01-30 23:04     ` Brendan Higgins

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).