Linux-kselftest Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH AUTOSEL 5.4 071/459] kselftest: Minimise dependency of get_size on C library interfaces
       [not found] <20200214160149.11681-1-sashal@kernel.org>
@ 2020-02-14 15:55 ` Sasha Levin
  2020-02-14 15:55 ` [PATCH AUTOSEL 5.4 099/459] selftests: settings: tests can be in subsubdirs Sasha Levin
                   ` (3 subsequent siblings)
  4 siblings, 0 replies; 5+ messages in thread
From: Sasha Levin @ 2020-02-14 15:55 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Siddhesh Poyarekar, Masami Hiramatsu, Tim Bird, Shuah Khan,
	Sasha Levin, linux-kselftest

From: Siddhesh Poyarekar <siddhesh@gotplt.org>

[ Upstream commit 6b64a650f0b2ae3940698f401732988699eecf7a ]

It was observed[1] on arm64 that __builtin_strlen led to an infinite
loop in the get_size selftest.  This is because __builtin_strlen (and
other builtins) may sometimes result in a call to the C library
function.  The C library implementation of strlen uses an IFUNC
resolver to load the most efficient strlen implementation for the
underlying machine and hence has a PLT indirection even for static
binaries.  Because this binary avoids the C library startup routines,
the PLT initialization never happens and hence the program gets stuck
in an infinite loop.

On x86_64 the __builtin_strlen just happens to expand inline and avoid
the call but that is not always guaranteed.

Further, while testing on x86_64 (Fedora 31), it was observed that the
test also failed with a segfault inside write() because the generated
code for the write function in glibc seems to access TLS before the
syscall (probably due to the cancellation point check) and fails
because TLS is not initialised.

To mitigate these problems, this patch reduces the interface with the
C library to just the syscall function.  The syscall function still
sets errno on failure, which is undesirable but for now it only
affects cases where syscalls fail.

[1] https://bugs.linaro.org/show_bug.cgi?id=5479

Signed-off-by: Siddhesh Poyarekar <siddhesh@gotplt.org>
Reported-by: Masami Hiramatsu <masami.hiramatsu@linaro.org>
Tested-by: Masami Hiramatsu <masami.hiramatsu@linaro.org>
Reviewed-by: Tim Bird <tim.bird@sony.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/size/get_size.c | 24 ++++++++++++++++++------
 1 file changed, 18 insertions(+), 6 deletions(-)

diff --git a/tools/testing/selftests/size/get_size.c b/tools/testing/selftests/size/get_size.c
index 2ad45b9443550..2980b1a63366b 100644
--- a/tools/testing/selftests/size/get_size.c
+++ b/tools/testing/selftests/size/get_size.c
@@ -11,23 +11,35 @@
  * own execution.  It also attempts to have as few dependencies
  * on kernel features as possible.
  *
- * It should be statically linked, with startup libs avoided.
- * It uses no library calls, and only the following 3 syscalls:
+ * It should be statically linked, with startup libs avoided.  It uses
+ * no library calls except the syscall() function for the following 3
+ * syscalls:
  *   sysinfo(), write(), and _exit()
  *
  * For output, it avoids printf (which in some C libraries
  * has large external dependencies) by  implementing it's own
  * number output and print routines, and using __builtin_strlen()
+ *
+ * The test may crash if any of the above syscalls fails because in some
+ * libc implementations (e.g. the GNU C Library) errno is saved in
+ * thread-local storage, which does not get initialized due to avoiding
+ * startup libs.
  */
 
 #include <sys/sysinfo.h>
 #include <unistd.h>
+#include <sys/syscall.h>
 
 #define STDOUT_FILENO 1
 
 static int print(const char *s)
 {
-	return write(STDOUT_FILENO, s, __builtin_strlen(s));
+	size_t len = 0;
+
+	while (s[len] != '\0')
+		len++;
+
+	return syscall(SYS_write, STDOUT_FILENO, s, len);
 }
 
 static inline char *num_to_str(unsigned long num, char *buf, int len)
@@ -79,12 +91,12 @@ void _start(void)
 	print("TAP version 13\n");
 	print("# Testing system size.\n");
 
-	ccode = sysinfo(&info);
+	ccode = syscall(SYS_sysinfo, &info);
 	if (ccode < 0) {
 		print("not ok 1");
 		print(test_name);
 		print(" ---\n reason: \"could not get sysinfo\"\n ...\n");
-		_exit(ccode);
+		syscall(SYS_exit, ccode);
 	}
 	print("ok 1");
 	print(test_name);
@@ -100,5 +112,5 @@ void _start(void)
 	print(" ...\n");
 	print("1..1\n");
 
-	_exit(0);
+	syscall(SYS_exit, 0);
 }
-- 
2.20.1


^ permalink raw reply	[flat|nested] 5+ messages in thread

* [PATCH AUTOSEL 5.4 099/459] selftests: settings: tests can be in subsubdirs
       [not found] <20200214160149.11681-1-sashal@kernel.org>
  2020-02-14 15:55 ` [PATCH AUTOSEL 5.4 071/459] kselftest: Minimise dependency of get_size on C library interfaces Sasha Levin
@ 2020-02-14 15:55 ` Sasha Levin
  2020-02-14 15:57 ` [PATCH AUTOSEL 5.4 183/459] selftests/net: make so_txtime more robust to timer variance Sasha Levin
                   ` (2 subsequent siblings)
  4 siblings, 0 replies; 5+ messages in thread
From: Sasha Levin @ 2020-02-14 15:55 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Matthieu Baerts, Kees Cook, Shuah Khan, Sasha Levin, linux-kselftest

From: Matthieu Baerts <matthieu.baerts@tessares.net>

[ Upstream commit ac87813d4372f4c005264acbe3b7f00c1dee37c4 ]

Commit 852c8cbf34d3 ("selftests/kselftest/runner.sh: Add 45 second
timeout per test") adds support for a new per-test-directory "settings"
file. But this only works for tests not in a sub-subdirectories, e.g.

 - tools/testing/selftests/rtc (rtc) is OK,
 - tools/testing/selftests/net/mptcp (net/mptcp) is not.

We have to increase the timeout for net/mptcp tests which are not
upstreamed yet but this fix is valid for other tests if they need to add
a "settings" file, see the full list with:

  tools/testing/selftests/*/*/**/Makefile

Note that this patch changes the text header message printed at the end
of the execution but this text is modified only for the tests that are
in sub-subdirectories, e.g.

  ok 1 selftests: net/mptcp: mptcp_connect.sh

Before we had:

  ok 1 selftests: mptcp: mptcp_connect.sh

But showing the full target name is probably better, just in case a
subsubdir has the same name as another one in another subdirectory.

Fixes: 852c8cbf34d3 (selftests/kselftest/runner.sh: Add 45 second timeout per test)
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/kselftest/runner.sh | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/testing/selftests/kselftest/runner.sh b/tools/testing/selftests/kselftest/runner.sh
index a8d20cbb711cf..e84d901f85672 100644
--- a/tools/testing/selftests/kselftest/runner.sh
+++ b/tools/testing/selftests/kselftest/runner.sh
@@ -91,7 +91,7 @@ run_one()
 run_many()
 {
 	echo "TAP version 13"
-	DIR=$(basename "$PWD")
+	DIR="${PWD#${BASE_DIR}/}"
 	test_num=0
 	total=$(echo "$@" | wc -w)
 	echo "1..$total"
-- 
2.20.1


^ permalink raw reply	[flat|nested] 5+ messages in thread

* [PATCH AUTOSEL 5.4 183/459] selftests/net: make so_txtime more robust to timer variance
       [not found] <20200214160149.11681-1-sashal@kernel.org>
  2020-02-14 15:55 ` [PATCH AUTOSEL 5.4 071/459] kselftest: Minimise dependency of get_size on C library interfaces Sasha Levin
  2020-02-14 15:55 ` [PATCH AUTOSEL 5.4 099/459] selftests: settings: tests can be in subsubdirs Sasha Levin
@ 2020-02-14 15:57 ` Sasha Levin
  2020-02-14 16:00 ` [PATCH AUTOSEL 5.4 397/459] selftests: bpf: Reset global state between reuseport test runs Sasha Levin
  2020-02-14 16:00 ` [PATCH AUTOSEL 5.4 401/459] selftests/eeh: Bump EEH wait time to 60s Sasha Levin
  4 siblings, 0 replies; 5+ messages in thread
From: Sasha Levin @ 2020-02-14 15:57 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Willem de Bruijn, Naresh Kamboju, Jakub Kicinski, Sasha Levin,
	netdev, linux-kselftest

From: Willem de Bruijn <willemb@google.com>

[ Upstream commit ea6a547669b37453f2b1a5d85188d75b3613dfaa ]

The SO_TXTIME test depends on accurate timers. In some virtualized
environments the test has been reported to be flaky. This is easily
reproduced by disabling kvm acceleration in Qemu.

Allow greater variance in a run and retry to further reduce flakiness.

Observed errors are one of two kinds: either the packet arrives too
early or late at recv(), or it was dropped in the qdisc itself and the
recv() call times out.

In the latter case, the qdisc queues a notification to the error
queue of the send socket. Also explicitly report this cause.

Link: https://lore.kernel.org/netdev/CA+FuTSdYOnJCsGuj43xwV1jxvYsaoa_LzHQF9qMyhrkLrivxKw@mail.gmail.com
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/net/so_txtime.c  | 84 +++++++++++++++++++++++-
 tools/testing/selftests/net/so_txtime.sh |  9 ++-
 2 files changed, 88 insertions(+), 5 deletions(-)

diff --git a/tools/testing/selftests/net/so_txtime.c b/tools/testing/selftests/net/so_txtime.c
index 34df4c8882afb..383bac05ac324 100644
--- a/tools/testing/selftests/net/so_txtime.c
+++ b/tools/testing/selftests/net/so_txtime.c
@@ -12,7 +12,11 @@
 #include <arpa/inet.h>
 #include <error.h>
 #include <errno.h>
+#include <inttypes.h>
 #include <linux/net_tstamp.h>
+#include <linux/errqueue.h>
+#include <linux/ipv6.h>
+#include <linux/tcp.h>
 #include <stdbool.h>
 #include <stdlib.h>
 #include <stdio.h>
@@ -28,7 +32,7 @@ static int	cfg_clockid	= CLOCK_TAI;
 static bool	cfg_do_ipv4;
 static bool	cfg_do_ipv6;
 static uint16_t	cfg_port	= 8000;
-static int	cfg_variance_us	= 2000;
+static int	cfg_variance_us	= 4000;
 
 static uint64_t glob_tstart;
 
@@ -43,6 +47,9 @@ static struct timed_send cfg_in[MAX_NUM_PKT];
 static struct timed_send cfg_out[MAX_NUM_PKT];
 static int cfg_num_pkt;
 
+static int cfg_errq_level;
+static int cfg_errq_type;
+
 static uint64_t gettime_ns(void)
 {
 	struct timespec ts;
@@ -90,13 +97,15 @@ static void do_send_one(int fdt, struct timed_send *ts)
 
 }
 
-static void do_recv_one(int fdr, struct timed_send *ts)
+static bool do_recv_one(int fdr, struct timed_send *ts)
 {
 	int64_t tstop, texpect;
 	char rbuf[2];
 	int ret;
 
 	ret = recv(fdr, rbuf, sizeof(rbuf), 0);
+	if (ret == -1 && errno == EAGAIN)
+		return true;
 	if (ret == -1)
 		error(1, errno, "read");
 	if (ret != 1)
@@ -113,6 +122,8 @@ static void do_recv_one(int fdr, struct timed_send *ts)
 
 	if (labs(tstop - texpect) > cfg_variance_us)
 		error(1, 0, "exceeds variance (%d us)", cfg_variance_us);
+
+	return false;
 }
 
 static void do_recv_verify_empty(int fdr)
@@ -125,12 +136,70 @@ static void do_recv_verify_empty(int fdr)
 		error(1, 0, "recv: not empty as expected (%d, %d)", ret, errno);
 }
 
+static void do_recv_errqueue_timeout(int fdt)
+{
+	char control[CMSG_SPACE(sizeof(struct sock_extended_err)) +
+		     CMSG_SPACE(sizeof(struct sockaddr_in6))] = {0};
+	char data[sizeof(struct ipv6hdr) +
+		  sizeof(struct tcphdr) + 1];
+	struct sock_extended_err *err;
+	struct msghdr msg = {0};
+	struct iovec iov = {0};
+	struct cmsghdr *cm;
+	int64_t tstamp = 0;
+	int ret;
+
+	iov.iov_base = data;
+	iov.iov_len = sizeof(data);
+
+	msg.msg_iov = &iov;
+	msg.msg_iovlen = 1;
+
+	msg.msg_control = control;
+	msg.msg_controllen = sizeof(control);
+
+	while (1) {
+		ret = recvmsg(fdt, &msg, MSG_ERRQUEUE);
+		if (ret == -1 && errno == EAGAIN)
+			break;
+		if (ret == -1)
+			error(1, errno, "errqueue");
+		if (msg.msg_flags != MSG_ERRQUEUE)
+			error(1, 0, "errqueue: flags 0x%x\n", msg.msg_flags);
+
+		cm = CMSG_FIRSTHDR(&msg);
+		if (cm->cmsg_level != cfg_errq_level ||
+		    cm->cmsg_type != cfg_errq_type)
+			error(1, 0, "errqueue: type 0x%x.0x%x\n",
+				    cm->cmsg_level, cm->cmsg_type);
+
+		err = (struct sock_extended_err *)CMSG_DATA(cm);
+		if (err->ee_origin != SO_EE_ORIGIN_TXTIME)
+			error(1, 0, "errqueue: origin 0x%x\n", err->ee_origin);
+		if (err->ee_code != ECANCELED)
+			error(1, 0, "errqueue: code 0x%x\n", err->ee_code);
+
+		tstamp = ((int64_t) err->ee_data) << 32 | err->ee_info;
+		tstamp -= (int64_t) glob_tstart;
+		tstamp /= 1000 * 1000;
+		fprintf(stderr, "send: pkt %c at %" PRId64 "ms dropped\n",
+				data[ret - 1], tstamp);
+
+		msg.msg_flags = 0;
+		msg.msg_controllen = sizeof(control);
+	}
+
+	error(1, 0, "recv: timeout");
+}
+
 static void setsockopt_txtime(int fd)
 {
 	struct sock_txtime so_txtime_val = { .clockid = cfg_clockid };
 	struct sock_txtime so_txtime_val_read = { 0 };
 	socklen_t vallen = sizeof(so_txtime_val);
 
+	so_txtime_val.flags = SOF_TXTIME_REPORT_ERRORS;
+
 	if (setsockopt(fd, SOL_SOCKET, SO_TXTIME,
 		       &so_txtime_val, sizeof(so_txtime_val)))
 		error(1, errno, "setsockopt txtime");
@@ -194,7 +263,8 @@ static void do_test(struct sockaddr *addr, socklen_t alen)
 	for (i = 0; i < cfg_num_pkt; i++)
 		do_send_one(fdt, &cfg_in[i]);
 	for (i = 0; i < cfg_num_pkt; i++)
-		do_recv_one(fdr, &cfg_out[i]);
+		if (do_recv_one(fdr, &cfg_out[i]))
+			do_recv_errqueue_timeout(fdt);
 
 	do_recv_verify_empty(fdr);
 
@@ -280,6 +350,10 @@ int main(int argc, char **argv)
 		addr6.sin6_family = AF_INET6;
 		addr6.sin6_port = htons(cfg_port);
 		addr6.sin6_addr = in6addr_loopback;
+
+		cfg_errq_level = SOL_IPV6;
+		cfg_errq_type = IPV6_RECVERR;
+
 		do_test((void *)&addr6, sizeof(addr6));
 	}
 
@@ -289,6 +363,10 @@ int main(int argc, char **argv)
 		addr4.sin_family = AF_INET;
 		addr4.sin_port = htons(cfg_port);
 		addr4.sin_addr.s_addr = htonl(INADDR_LOOPBACK);
+
+		cfg_errq_level = SOL_IP;
+		cfg_errq_type = IP_RECVERR;
+
 		do_test((void *)&addr4, sizeof(addr4));
 	}
 
diff --git a/tools/testing/selftests/net/so_txtime.sh b/tools/testing/selftests/net/so_txtime.sh
index 5aa519328a5b5..3f7800eaecb1e 100755
--- a/tools/testing/selftests/net/so_txtime.sh
+++ b/tools/testing/selftests/net/so_txtime.sh
@@ -5,7 +5,12 @@
 
 # Run in network namespace
 if [[ $# -eq 0 ]]; then
-	./in_netns.sh $0 __subprocess
+	if ! ./in_netns.sh $0 __subprocess; then
+		# test is time sensitive, can be flaky
+		echo "test failed: retry once"
+		./in_netns.sh $0 __subprocess
+	fi
+
 	exit $?
 fi
 
@@ -18,7 +23,7 @@ tc qdisc add dev lo root fq
 ./so_txtime -4 -6 -c mono a,10,b,20 a,10,b,20
 ./so_txtime -4 -6 -c mono a,20,b,10 b,20,a,20
 
-if tc qdisc replace dev lo root etf clockid CLOCK_TAI delta 200000; then
+if tc qdisc replace dev lo root etf clockid CLOCK_TAI delta 400000; then
 	! ./so_txtime -4 -6 -c tai a,-1 a,-1
 	! ./so_txtime -4 -6 -c tai a,0 a,0
 	./so_txtime -4 -6 -c tai a,10 a,10
-- 
2.20.1


^ permalink raw reply	[flat|nested] 5+ messages in thread

* [PATCH AUTOSEL 5.4 397/459] selftests: bpf: Reset global state between reuseport test runs
       [not found] <20200214160149.11681-1-sashal@kernel.org>
                   ` (2 preceding siblings ...)
  2020-02-14 15:57 ` [PATCH AUTOSEL 5.4 183/459] selftests/net: make so_txtime more robust to timer variance Sasha Levin
@ 2020-02-14 16:00 ` Sasha Levin
  2020-02-14 16:00 ` [PATCH AUTOSEL 5.4 401/459] selftests/eeh: Bump EEH wait time to 60s Sasha Levin
  4 siblings, 0 replies; 5+ messages in thread
From: Sasha Levin @ 2020-02-14 16:00 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Lorenz Bauer, Daniel Borkmann, Jakub Sitnicki, Martin KaFai Lau,
	John Fastabend, Sasha Levin, linux-kselftest, netdev, bpf

From: Lorenz Bauer <lmb@cloudflare.com>

[ Upstream commit 51bad0f05616c43d6d34b0a19bcc9bdab8e8fb39 ]

Currently, there is a lot of false positives if a single reuseport test
fails. This is because expected_results and the result map are not cleared.

Zero both after individual test runs, which fixes the mentioned false
positives.

Fixes: 91134d849a0e ("bpf: Test BPF_PROG_TYPE_SK_REUSEPORT")
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200124112754.19664-5-lmb@cloudflare.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../selftests/bpf/test_select_reuseport.c        | 16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)

diff --git a/tools/testing/selftests/bpf/test_select_reuseport.c b/tools/testing/selftests/bpf/test_select_reuseport.c
index 7566c13eb51a7..079d0f5a29091 100644
--- a/tools/testing/selftests/bpf/test_select_reuseport.c
+++ b/tools/testing/selftests/bpf/test_select_reuseport.c
@@ -30,7 +30,7 @@
 #define REUSEPORT_ARRAY_SIZE 32
 
 static int result_map, tmp_index_ovr_map, linum_map, data_check_map;
-static enum result expected_results[NR_RESULTS];
+static __u32 expected_results[NR_RESULTS];
 static int sk_fds[REUSEPORT_ARRAY_SIZE];
 static int reuseport_array, outer_map;
 static int select_by_skb_data_prog;
@@ -662,7 +662,19 @@ static void setup_per_test(int type, unsigned short family, bool inany)
 
 static void cleanup_per_test(void)
 {
-	int i, err;
+	int i, err, zero = 0;
+
+	memset(expected_results, 0, sizeof(expected_results));
+
+	for (i = 0; i < NR_RESULTS; i++) {
+		err = bpf_map_update_elem(result_map, &i, &zero, BPF_ANY);
+		RET_IF(err, "reset elem in result_map",
+		       "i:%u err:%d errno:%d\n", i, err, errno);
+	}
+
+	err = bpf_map_update_elem(linum_map, &zero, &zero, BPF_ANY);
+	RET_IF(err, "reset line number in linum_map", "err:%d errno:%d\n",
+	       err, errno);
 
 	for (i = 0; i < REUSEPORT_ARRAY_SIZE; i++)
 		close(sk_fds[i]);
-- 
2.20.1


^ permalink raw reply	[flat|nested] 5+ messages in thread

* [PATCH AUTOSEL 5.4 401/459] selftests/eeh: Bump EEH wait time to 60s
       [not found] <20200214160149.11681-1-sashal@kernel.org>
                   ` (3 preceding siblings ...)
  2020-02-14 16:00 ` [PATCH AUTOSEL 5.4 397/459] selftests: bpf: Reset global state between reuseport test runs Sasha Levin
@ 2020-02-14 16:00 ` Sasha Levin
  4 siblings, 0 replies; 5+ messages in thread
From: Sasha Levin @ 2020-02-14 16:00 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Oliver O'Halloran, Steve Best, Douglas Miller,
	Michael Ellerman, Sasha Levin, linuxppc-dev, linux-kselftest

From: Oliver O'Halloran <oohall@gmail.com>

[ Upstream commit 414f50434aa2463202a5b35e844f4125dd1a7101 ]

Some newer cards supported by aacraid can take up to 40s to recover
after an EEH event. This causes spurious failures in the basic EEH
self-test since the current maximim timeout is only 30s.

Fix the immediate issue by bumping the timeout to a default of 60s,
and allow the wait time to be specified via an environmental variable
(EEH_MAX_WAIT).

Reported-by: Steve Best <sbest@redhat.com>
Suggested-by: Douglas Miller <dougmill@us.ibm.com>
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200122031125.25991-1-oohall@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/powerpc/eeh/eeh-functions.sh | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/tools/testing/selftests/powerpc/eeh/eeh-functions.sh b/tools/testing/selftests/powerpc/eeh/eeh-functions.sh
index 26112ab5cdf42..f52ed92b53e74 100755
--- a/tools/testing/selftests/powerpc/eeh/eeh-functions.sh
+++ b/tools/testing/selftests/powerpc/eeh/eeh-functions.sh
@@ -53,9 +53,13 @@ eeh_one_dev() {
 	# is a no-op.
 	echo $dev >/sys/kernel/debug/powerpc/eeh_dev_check
 
-	# Enforce a 30s timeout for recovery. Even the IPR, which is infamously
-	# slow to reset, should recover within 30s.
-	max_wait=30
+	# Default to a 60s timeout when waiting for a device to recover. This
+	# is an arbitrary default which can be overridden by setting the
+	# EEH_MAX_WAIT environmental variable when required.
+
+	# The current record holder for longest recovery time is:
+	#  "Adaptec Series 8 12G SAS/PCIe 3" at 39 seconds
+	max_wait=${EEH_MAX_WAIT:=60}
 
 	for i in `seq 0 ${max_wait}` ; do
 		if pe_ok $dev ; then
-- 
2.20.1


^ permalink raw reply	[flat|nested] 5+ messages in thread

end of thread, back to index

Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
     [not found] <20200214160149.11681-1-sashal@kernel.org>
2020-02-14 15:55 ` [PATCH AUTOSEL 5.4 071/459] kselftest: Minimise dependency of get_size on C library interfaces Sasha Levin
2020-02-14 15:55 ` [PATCH AUTOSEL 5.4 099/459] selftests: settings: tests can be in subsubdirs Sasha Levin
2020-02-14 15:57 ` [PATCH AUTOSEL 5.4 183/459] selftests/net: make so_txtime more robust to timer variance Sasha Levin
2020-02-14 16:00 ` [PATCH AUTOSEL 5.4 397/459] selftests: bpf: Reset global state between reuseport test runs Sasha Levin
2020-02-14 16:00 ` [PATCH AUTOSEL 5.4 401/459] selftests/eeh: Bump EEH wait time to 60s Sasha Levin

Linux-kselftest Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-kselftest/0 linux-kselftest/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-kselftest linux-kselftest/ https://lore.kernel.org/linux-kselftest \
		linux-kselftest@vger.kernel.org
	public-inbox-index linux-kselftest

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kselftest


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git