Linux-kselftest Archive on lore.kernel.org
 help / color / Atom feed
From: Kees Cook <keescook@chromium.org>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Kees Cook <keescook@chromium.org>,
	Scott Branden <scott.branden@broadcom.com>,
	Mimi Zohar <zohar@linux.ibm.com>,
	Luis Chamberlain <mcgrof@kernel.org>,
	Jessica Yu <jeyu@kernel.org>, SeongJae Park <sjpark@amazon.de>,
	KP Singh <kpsingh@chromium.org>,
	linux-efi@vger.kernel.org, linux-security-module@vger.kernel.org,
	linux-integrity@vger.kernel.org, selinux@vger.kernel.org,
	linux-kselftest@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v3 18/19] firmware: Add request_partial_firmware_into_buf()
Date: Fri, 24 Jul 2020 14:36:39 -0700
Message-ID: <20200724213640.389191-19-keescook@chromium.org> (raw)
In-Reply-To: <20200724213640.389191-1-keescook@chromium.org>

From: Scott Branden <scott.branden@broadcom.com>

Add request_partial_firmware_into_buf() to allow for portions of a
firmware file to be read into a buffer. This is needed when large firmware
must be loaded in portions from a file on memory constrained systems.

Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
---
 drivers/base/firmware_loader/firmware.h |   4 +
 drivers/base/firmware_loader/main.c     | 109 +++++++++++++++++++-----
 include/linux/firmware.h                |  12 +++
 3 files changed, 105 insertions(+), 20 deletions(-)

diff --git a/drivers/base/firmware_loader/firmware.h b/drivers/base/firmware_loader/firmware.h
index 7ad5fe52bc72..3f6eda46b3a2 100644
--- a/drivers/base/firmware_loader/firmware.h
+++ b/drivers/base/firmware_loader/firmware.h
@@ -32,6 +32,8 @@
  * @FW_OPT_FALLBACK_PLATFORM: Enable fallback to device fw copy embedded in
  *	the platform's main firmware. If both this fallback and the sysfs
  *      fallback are enabled, then this fallback will be tried first.
+ * @FW_OPT_PARTIAL: Allow partial read of firmware instead of needing to read
+ *	entire file.
  */
 enum fw_opt {
 	FW_OPT_UEVENT			= BIT(0),
@@ -41,6 +43,7 @@ enum fw_opt {
 	FW_OPT_NOCACHE			= BIT(4),
 	FW_OPT_NOFALLBACK_SYSFS		= BIT(5),
 	FW_OPT_FALLBACK_PLATFORM	= BIT(6),
+	FW_OPT_PARTIAL			= BIT(7),
 };
 
 enum fw_status {
@@ -68,6 +71,7 @@ struct fw_priv {
 	void *data;
 	size_t size;
 	size_t allocated_size;
+	size_t offset;
 	u32 opt_flags;
 #ifdef CONFIG_FW_LOADER_PAGED_BUF
 	bool is_paged_buf;
diff --git a/drivers/base/firmware_loader/main.c b/drivers/base/firmware_loader/main.c
index 814a18cc51bd..7aa22bdc2f60 100644
--- a/drivers/base/firmware_loader/main.c
+++ b/drivers/base/firmware_loader/main.c
@@ -170,10 +170,19 @@ static struct fw_priv *__allocate_fw_priv(const char *fw_name,
 					  struct firmware_cache *fwc,
 					  void *dbuf,
 					  size_t size,
+					  size_t offset,
 					  u32 opt_flags)
 {
 	struct fw_priv *fw_priv;
 
+	/* For a partial read, the buffer must be preallocated. */
+	if ((opt_flags & FW_OPT_PARTIAL) && !dbuf)
+		return NULL;
+
+	/* Only partial reads are allowed to use an offset. */
+	if (offset != 0 && !(opt_flags & FW_OPT_PARTIAL))
+		return NULL;
+
 	fw_priv = kzalloc(sizeof(*fw_priv), GFP_ATOMIC);
 	if (!fw_priv)
 		return NULL;
@@ -188,6 +197,7 @@ static struct fw_priv *__allocate_fw_priv(const char *fw_name,
 	fw_priv->fwc = fwc;
 	fw_priv->data = dbuf;
 	fw_priv->allocated_size = size;
+	fw_priv->offset = offset;
 	fw_priv->opt_flags = opt_flags;
 	fw_state_init(fw_priv);
 #ifdef CONFIG_FW_LOADER_USER_HELPER
@@ -216,12 +226,17 @@ static int alloc_lookup_fw_priv(const char *fw_name,
 				struct fw_priv **fw_priv,
 				void *dbuf,
 				size_t size,
+				size_t offset,
 				u32 opt_flags)
 {
 	struct fw_priv *tmp;
 
 	spin_lock(&fwc->lock);
-	if (!(opt_flags & FW_OPT_NOCACHE)) {
+	/*
+	 * Do not merge requests that are marked to be non-cached or
+	 * are performing partial reads.
+	 */
+	if (!(opt_flags & (FW_OPT_NOCACHE | FW_OPT_PARTIAL))) {
 		tmp = __lookup_fw_priv(fw_name);
 		if (tmp) {
 			kref_get(&tmp->ref);
@@ -232,7 +247,7 @@ static int alloc_lookup_fw_priv(const char *fw_name,
 		}
 	}
 
-	tmp = __allocate_fw_priv(fw_name, fwc, dbuf, size, opt_flags);
+	tmp = __allocate_fw_priv(fw_name, fwc, dbuf, size, offset, opt_flags);
 	if (tmp) {
 		INIT_LIST_HEAD(&tmp->list);
 		if (!(opt_flags & FW_OPT_NOCACHE))
@@ -439,6 +454,12 @@ static int fw_decompress_xz(struct device *dev, struct fw_priv *fw_priv,
 	else
 		return fw_decompress_xz_pages(dev, fw_priv, in_size, in_buffer);
 }
+#else
+static inline int fw_decompress_xz(struct device *dev, struct fw_priv *fw_priv,
+				   size_t in_size, const void *in_buffer)
+{
+	return -ENOENT;
+}
 #endif /* CONFIG_FW_LOADER_COMPRESS */
 
 /* direct firmware loading support */
@@ -485,6 +506,9 @@ fw_get_filesystem_firmware(struct device *device, struct fw_priv *fw_priv,
 		return -ENOMEM;
 
 	for (i = 0; i < ARRAY_SIZE(fw_path); i++) {
+		size_t file_size = 0;
+		size_t *file_size_ptr = NULL;
+
 		/* skip the unset customized path */
 		if (!fw_path[i][0])
 			continue;
@@ -498,9 +522,18 @@ fw_get_filesystem_firmware(struct device *device, struct fw_priv *fw_priv,
 
 		fw_priv->size = 0;
 
+		/*
+		 * The total file size is only examined when doing a partial
+		 * read; the "full read" case needs to fail if the whole
+		 * firmware was not completely loaded.
+		 */
+		if ((fw_priv->opt_flags & FW_OPT_PARTIAL) && buffer)
+			file_size_ptr = &file_size;
+
 		/* load firmware files from the mount namespace of init */
-		rc = kernel_read_file_from_path_initns(path, 0, &buffer, msize,
-						       NULL,
+		rc = kernel_read_file_from_path_initns(path, fw_priv->offset,
+						       &buffer, msize,
+						       file_size_ptr,
 						       READING_FIRMWARE);
 		if (rc < 0) {
 			if (rc != -ENOENT)
@@ -691,7 +724,7 @@ int assign_fw(struct firmware *fw, struct device *device)
 static int
 _request_firmware_prepare(struct firmware **firmware_p, const char *name,
 			  struct device *device, void *dbuf, size_t size,
-			  u32 opt_flags)
+			  size_t offset, u32 opt_flags)
 {
 	struct firmware *firmware;
 	struct fw_priv *fw_priv;
@@ -710,7 +743,7 @@ _request_firmware_prepare(struct firmware **firmware_p, const char *name,
 	}
 
 	ret = alloc_lookup_fw_priv(name, &fw_cache, &fw_priv, dbuf, size,
-				  opt_flags);
+				   offset, opt_flags);
 
 	/*
 	 * bind with 'priv' now to avoid warning in failure path
@@ -757,9 +790,10 @@ static void fw_abort_batch_reqs(struct firmware *fw)
 static int
 _request_firmware(const struct firmware **firmware_p, const char *name,
 		  struct device *device, void *buf, size_t size,
-		  u32 opt_flags)
+		  size_t offset, u32 opt_flags)
 {
 	struct firmware *fw = NULL;
+	bool nondirect = false;
 	int ret;
 
 	if (!firmware_p)
@@ -771,18 +805,20 @@ _request_firmware(const struct firmware **firmware_p, const char *name,
 	}
 
 	ret = _request_firmware_prepare(&fw, name, device, buf, size,
-					opt_flags);
+					offset, opt_flags);
 	if (ret <= 0) /* error or already assigned */
 		goto out;
 
 	ret = fw_get_filesystem_firmware(device, fw->priv, "", NULL);
-#ifdef CONFIG_FW_LOADER_COMPRESS
-	if (ret == -ENOENT)
+
+	/* Only full reads can support decompression, platform, and sysfs. */
+	if (!(opt_flags & FW_OPT_PARTIAL))
+		nondirect = true;
+
+	if (ret == -ENOENT && nondirect)
 		ret = fw_get_filesystem_firmware(device, fw->priv, ".xz",
 						 fw_decompress_xz);
-#endif
-
-	if (ret == -ENOENT)
+	if (ret == -ENOENT && nondirect)
 		ret = firmware_fallback_platform(fw->priv);
 
 	if (ret) {
@@ -790,7 +826,9 @@ _request_firmware(const struct firmware **firmware_p, const char *name,
 			dev_warn(device,
 				 "Direct firmware load for %s failed with error %d\n",
 				 name, ret);
-		ret = firmware_fallback_sysfs(fw, name, device, opt_flags, ret);
+		if (nondirect)
+			ret = firmware_fallback_sysfs(fw, name, device,
+						      opt_flags, ret);
 	} else
 		ret = assign_fw(fw, device);
 
@@ -833,7 +871,7 @@ request_firmware(const struct firmware **firmware_p, const char *name,
 
 	/* Need to pin this module until return */
 	__module_get(THIS_MODULE);
-	ret = _request_firmware(firmware_p, name, device, NULL, 0,
+	ret = _request_firmware(firmware_p, name, device, NULL, 0, 0,
 				FW_OPT_UEVENT);
 	module_put(THIS_MODULE);
 	return ret;
@@ -860,7 +898,7 @@ int firmware_request_nowarn(const struct firmware **firmware, const char *name,
 
 	/* Need to pin this module until return */
 	__module_get(THIS_MODULE);
-	ret = _request_firmware(firmware, name, device, NULL, 0,
+	ret = _request_firmware(firmware, name, device, NULL, 0, 0,
 				FW_OPT_UEVENT | FW_OPT_NO_WARN);
 	module_put(THIS_MODULE);
 	return ret;
@@ -884,7 +922,7 @@ int request_firmware_direct(const struct firmware **firmware_p,
 	int ret;
 
 	__module_get(THIS_MODULE);
-	ret = _request_firmware(firmware_p, name, device, NULL, 0,
+	ret = _request_firmware(firmware_p, name, device, NULL, 0, 0,
 				FW_OPT_UEVENT | FW_OPT_NO_WARN |
 				FW_OPT_NOFALLBACK_SYSFS);
 	module_put(THIS_MODULE);
@@ -909,7 +947,7 @@ int firmware_request_platform(const struct firmware **firmware,
 
 	/* Need to pin this module until return */
 	__module_get(THIS_MODULE);
-	ret = _request_firmware(firmware, name, device, NULL, 0,
+	ret = _request_firmware(firmware, name, device, NULL, 0, 0,
 				FW_OPT_UEVENT | FW_OPT_FALLBACK_PLATFORM);
 	module_put(THIS_MODULE);
 	return ret;
@@ -965,13 +1003,44 @@ request_firmware_into_buf(const struct firmware **firmware_p, const char *name,
 		return -EOPNOTSUPP;
 
 	__module_get(THIS_MODULE);
-	ret = _request_firmware(firmware_p, name, device, buf, size,
+	ret = _request_firmware(firmware_p, name, device, buf, size, 0,
 				FW_OPT_UEVENT | FW_OPT_NOCACHE);
 	module_put(THIS_MODULE);
 	return ret;
 }
 EXPORT_SYMBOL(request_firmware_into_buf);
 
+/**
+ * request_partial_firmware_into_buf() - load partial firmware into a previously allocated buffer
+ * @firmware_p: pointer to firmware image
+ * @name: name of firmware file
+ * @device: device for which firmware is being loaded and DMA region allocated
+ * @buf: address of buffer to load firmware into
+ * @size: size of buffer
+ * @offset: offset into file to read
+ *
+ * This function works pretty much like request_firmware_into_buf except
+ * it allows a partial read of the file.
+ */
+int
+request_partial_firmware_into_buf(const struct firmware **firmware_p,
+				  const char *name, struct device *device,
+				  void *buf, size_t size, size_t offset)
+{
+	int ret;
+
+	if (fw_cache_is_setup(device, name))
+		return -EOPNOTSUPP;
+
+	__module_get(THIS_MODULE);
+	ret = _request_firmware(firmware_p, name, device, buf, size, offset,
+				FW_OPT_UEVENT | FW_OPT_NOCACHE |
+				FW_OPT_PARTIAL);
+	module_put(THIS_MODULE);
+	return ret;
+}
+EXPORT_SYMBOL(request_partial_firmware_into_buf);
+
 /**
  * release_firmware() - release the resource associated with a firmware image
  * @fw: firmware resource to release
@@ -1004,7 +1073,7 @@ static void request_firmware_work_func(struct work_struct *work)
 
 	fw_work = container_of(work, struct firmware_work, work);
 
-	_request_firmware(&fw, fw_work->name, fw_work->device, NULL, 0,
+	_request_firmware(&fw, fw_work->name, fw_work->device, NULL, 0, 0,
 			  fw_work->opt_flags);
 	fw_work->cont(fw, fw_work->context);
 	put_device(fw_work->device); /* taken in request_firmware_nowait() */
diff --git a/include/linux/firmware.h b/include/linux/firmware.h
index cb3e2c06ed8a..c15acadc6cf4 100644
--- a/include/linux/firmware.h
+++ b/include/linux/firmware.h
@@ -53,6 +53,9 @@ int request_firmware_direct(const struct firmware **fw, const char *name,
 			    struct device *device);
 int request_firmware_into_buf(const struct firmware **firmware_p,
 	const char *name, struct device *device, void *buf, size_t size);
+int request_partial_firmware_into_buf(const struct firmware **firmware_p,
+				      const char *name, struct device *device,
+				      void *buf, size_t size, size_t offset);
 
 void release_firmware(const struct firmware *fw);
 #else
@@ -102,6 +105,15 @@ static inline int request_firmware_into_buf(const struct firmware **firmware_p,
 	return -EINVAL;
 }
 
+static inline int request_partial_firmware_into_buf
+					(const struct firmware **firmware_p,
+					 const char *name,
+					 struct device *device,
+					 void *buf, size_t size, size_t offset)
+{
+	return -EINVAL;
+}
+
 #endif
 
 int firmware_request_cache(struct device *device, const char *name);
-- 
2.25.1


  parent reply index

Thread overview: 51+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-24 21:36 [PATCH v3 00/19] Introduce partial kernel_read_file() support Kees Cook
2020-07-24 21:36 ` [PATCH v3 01/19] test_firmware: Test platform fw loading on non-EFI systems Kees Cook
2020-07-24 21:36 ` [PATCH v3 02/19] selftest/firmware: Add selftest timeout in settings Kees Cook
2020-07-24 21:36 ` [PATCH v3 03/19] firmware_loader: EFI firmware loader must handle pre-allocated buffer Kees Cook
2020-07-25 10:07   ` Greg Kroah-Hartman
2020-07-25 15:50     ` Kees Cook
2020-07-25 17:20       ` Greg Kroah-Hartman
2020-07-24 21:36 ` [PATCH v3 04/19] fs/kernel_read_file: Remove FIRMWARE_PREALLOC_BUFFER enum Kees Cook
2020-07-27 13:35   ` Mimi Zohar
2020-07-24 21:36 ` [PATCH v3 05/19] fs/kernel_read_file: Remove FIRMWARE_EFI_EMBEDDED enum Kees Cook
2020-07-24 21:36 ` [PATCH v3 06/19] fs/kernel_read_file: Split into separate include file Kees Cook
2020-07-27 14:41   ` Mimi Zohar
2020-07-24 21:36 ` [PATCH v3 07/19] fs/kernel_read_file: Split into separate source file Kees Cook
2020-07-27 14:53   ` Mimi Zohar
2020-07-24 21:36 ` [PATCH v3 08/19] fs/kernel_read_file: Remove redundant size argument Kees Cook
2020-07-27 16:29   ` Mimi Zohar
2020-07-24 21:36 ` [PATCH v3 09/19] fs/kernel_read_file: Switch buffer size arg to size_t Kees Cook
2020-07-27 16:29   ` Mimi Zohar
2020-07-24 21:36 ` [PATCH v3 10/19] fs/kernel_read_file: Add file_size output argument Kees Cook
2020-07-27 16:29   ` Mimi Zohar
2020-07-24 21:36 ` [PATCH v3 11/19] LSM: Introduce kernel_post_load_data() hook Kees Cook
2020-07-27 10:49   ` Mimi Zohar
2020-07-28 19:41     ` Kees Cook
2020-07-24 21:36 ` [PATCH v3 12/19] firmware_loader: Use security_post_load_data() Kees Cook
2020-07-27 10:57   ` Mimi Zohar
2020-07-28 19:43     ` Kees Cook
2020-07-29 16:29       ` Mimi Zohar
2020-07-29 18:10         ` Mimi Zohar
2020-07-29 19:13           ` Kees Cook
2020-07-24 21:36 ` [PATCH v3 13/19] module: Call security_kernel_post_load_data() Kees Cook
2020-07-24 21:36 ` [PATCH v3 14/19] LSM: Add "contents" flag to kernel_read_file hook Kees Cook
2020-07-24 21:36 ` [PATCH v3 15/19] IMA: Add support for file reads without contents Kees Cook
2020-07-27 13:23   ` Mimi Zohar
2020-07-28 19:44     ` Kees Cook
2020-07-28 19:56       ` Greg Kroah-Hartman
2020-07-28 20:12         ` Kees Cook
2020-07-24 21:36 ` [PATCH v3 16/19] fs/kernel_file_read: Add "offset" arg for partial reads Kees Cook
2020-07-24 21:36 ` [PATCH v3 17/19] firmware: Store opt_flags in fw_priv Kees Cook
2020-07-24 21:36 ` Kees Cook [this message]
2020-07-29  1:17   ` [PATCH v3 18/19] firmware: Add request_partial_firmware_into_buf() Luis Chamberlain
2020-07-29  6:22     ` Takashi Iwai
2020-07-29 17:43       ` Kees Cook
2020-07-24 21:36 ` [PATCH v3 19/19] test_firmware: Test partial read support Kees Cook
2020-07-25  5:14 ` [PATCH v3 00/19] Introduce partial kernel_read_file() support Scott Branden
2020-07-25 10:05 ` Greg Kroah-Hartman
2020-07-25 15:48   ` Kees Cook
2020-07-27 11:16 ` Mimi Zohar
2020-07-27 19:18   ` Scott Branden
2020-07-28 18:48     ` Mimi Zohar
2020-07-28 19:56       ` Scott Branden
2020-07-29  1:19 ` Luis Chamberlain

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200724213640.389191-19-keescook@chromium.org \
    --to=keescook@chromium.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=jeyu@kernel.org \
    --cc=kpsingh@chromium.org \
    --cc=linux-efi@vger.kernel.org \
    --cc=linux-integrity@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-kselftest@vger.kernel.org \
    --cc=linux-security-module@vger.kernel.org \
    --cc=mcgrof@kernel.org \
    --cc=scott.branden@broadcom.com \
    --cc=selinux@vger.kernel.org \
    --cc=sjpark@amazon.de \
    --cc=zohar@linux.ibm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-kselftest Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-kselftest/0 linux-kselftest/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-kselftest linux-kselftest/ https://lore.kernel.org/linux-kselftest \
		linux-kselftest@vger.kernel.org
	public-inbox-index linux-kselftest

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kselftest


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git