Linux-kselftest Archive on lore.kernel.org
 help / color / Atom feed
From: ira.weiny@intel.com
To: Thomas Gleixner <tglx@linutronix.de>,
	Ingo Molnar <mingo@redhat.com>, Borislav Petkov <bp@alien8.de>,
	Andy Lutomirski <luto@kernel.org>,
	Peter Zijlstra <peterz@infradead.org>
Cc: Ira Weiny <ira.weiny@intel.com>,
	x86@kernel.org, Dave Hansen <dave.hansen@linux.intel.com>,
	Dan Williams <dan.j.williams@intel.com>,
	Andrew Morton <akpm@linux-foundation.org>,
	Fenghua Yu <fenghua.yu@intel.com>,
	linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-nvdimm@lists.01.org, linux-mm@kvack.org,
	linux-kselftest@vger.kernel.org
Subject: [PATCH 02/10] x86/fpu: Refactor arch_set_user_pkey_access() for PKS support
Date: Thu, 22 Oct 2020 15:26:53 -0700
Message-ID: <20201022222701.887660-3-ira.weiny@intel.com> (raw)
In-Reply-To: <20201022222701.887660-1-ira.weiny@intel.com>

From: Ira Weiny <ira.weiny@intel.com>

Define a helper, update_pkey_val(), which will be used to support both
Protection Key User (PKU) and the new Protection Key for Supervisor
(PKS) in subsequent patches.

Co-developed-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>

---
Changes from RFC V3:
	Per Dave Hansen
		Update and add comments per Dave's review
	Per Peter
		Correct attribution
---
 arch/x86/include/asm/pkeys.h |  2 ++
 arch/x86/kernel/fpu/xstate.c | 22 ++++------------------
 arch/x86/mm/pkeys.c          | 23 +++++++++++++++++++++++
 3 files changed, 29 insertions(+), 18 deletions(-)

diff --git a/arch/x86/include/asm/pkeys.h b/arch/x86/include/asm/pkeys.h
index f9feba80894b..4526245b03e5 100644
--- a/arch/x86/include/asm/pkeys.h
+++ b/arch/x86/include/asm/pkeys.h
@@ -136,4 +136,6 @@ static inline int vma_pkey(struct vm_area_struct *vma)
 	return (vma->vm_flags & vma_pkey_mask) >> VM_PKEY_SHIFT;
 }
 
+u32 update_pkey_val(u32 pk_reg, int pkey, unsigned int flags);
+
 #endif /*_ASM_X86_PKEYS_H */
diff --git a/arch/x86/kernel/fpu/xstate.c b/arch/x86/kernel/fpu/xstate.c
index a99afc70cc0a..a3bca3211eba 100644
--- a/arch/x86/kernel/fpu/xstate.c
+++ b/arch/x86/kernel/fpu/xstate.c
@@ -994,9 +994,7 @@ const void *get_xsave_field_ptr(int xfeature_nr)
 int arch_set_user_pkey_access(struct task_struct *tsk, int pkey,
 		unsigned long init_val)
 {
-	u32 old_pkru;
-	int pkey_shift = (pkey * PKR_BITS_PER_PKEY);
-	u32 new_pkru_bits = 0;
+	u32 pkru;
 
 	/*
 	 * This check implies XSAVE support.  OSPKE only gets
@@ -1012,21 +1010,9 @@ int arch_set_user_pkey_access(struct task_struct *tsk, int pkey,
 	 */
 	WARN_ON_ONCE(pkey >= arch_max_pkey());
 
-	/* Set the bits we need in PKRU:  */
-	if (init_val & PKEY_DISABLE_ACCESS)
-		new_pkru_bits |= PKR_AD_BIT;
-	if (init_val & PKEY_DISABLE_WRITE)
-		new_pkru_bits |= PKR_WD_BIT;
-
-	/* Shift the bits in to the correct place in PKRU for pkey: */
-	new_pkru_bits <<= pkey_shift;
-
-	/* Get old PKRU and mask off any old bits in place: */
-	old_pkru = read_pkru();
-	old_pkru &= ~((PKR_AD_BIT|PKR_WD_BIT) << pkey_shift);
-
-	/* Write old part along with new part: */
-	write_pkru(old_pkru | new_pkru_bits);
+	pkru = read_pkru();
+	pkru = update_pkey_val(pkru, pkey, init_val);
+	write_pkru(pkru);
 
 	return 0;
 }
diff --git a/arch/x86/mm/pkeys.c b/arch/x86/mm/pkeys.c
index f5efb4007e74..d1dfe743e79f 100644
--- a/arch/x86/mm/pkeys.c
+++ b/arch/x86/mm/pkeys.c
@@ -208,3 +208,26 @@ static __init int setup_init_pkru(char *opt)
 	return 1;
 }
 __setup("init_pkru=", setup_init_pkru);
+
+/*
+ * Replace disable bits for @pkey with values from @flags
+ *
+ * Kernel users use the same flags as user space:
+ *     PKEY_DISABLE_ACCESS
+ *     PKEY_DISABLE_WRITE
+ */
+u32 update_pkey_val(u32 pk_reg, int pkey, unsigned int flags)
+{
+	int pkey_shift = pkey * PKR_BITS_PER_PKEY;
+
+	/*  Mask out old bit values */
+	pk_reg &= ~(((1 << PKR_BITS_PER_PKEY) - 1) << pkey_shift);
+
+	/*  Or in new values */
+	if (flags & PKEY_DISABLE_ACCESS)
+		pk_reg |= PKR_AD_BIT << pkey_shift;
+	if (flags & PKEY_DISABLE_WRITE)
+		pk_reg |= PKR_WD_BIT << pkey_shift;
+
+	return pk_reg;
+}
-- 
2.28.0.rc0.12.gb6a658bd00c9


  parent reply index

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-10-22 22:26 [PATCH 00/10] PKS: Add Protection Keys Supervisor (PKS) support ira.weiny
2020-10-22 22:26 ` [PATCH 01/10] x86/pkeys: Create pkeys_common.h ira.weiny
2020-10-22 22:26 ` ira.weiny [this message]
2020-10-22 22:26 ` [PATCH 03/10] x86/pks: Enable Protection Keys Supervisor (PKS) ira.weiny
2020-10-22 22:26 ` [PATCH 04/10] x86/pks: Preserve the PKRS MSR on context switch ira.weiny
2020-10-22 22:26 ` [PATCH 05/10] x86/pks: Add PKS kernel API ira.weiny
2020-10-22 22:26 ` [PATCH 06/10] x86/entry: Move nmi entry/exit into common code ira.weiny
2020-10-23 21:50   ` Thomas Gleixner
2020-10-27  7:07     ` Ira Weiny
2020-10-27 14:18       ` Thomas Gleixner
2020-10-22 22:26 ` [PATCH 07/10] x86/entry: Pass irqentry_state_t by reference ira.weiny
2020-10-23 21:56   ` Thomas Gleixner
2020-10-27  7:11     ` Ira Weiny
2020-10-22 22:26 ` [PATCH 08/10] x86/entry: Preserve PKRS MSR across exceptions ira.weiny
2020-10-22 22:27 ` [PATCH 09/10] x86/fault: Report the PKRS state on fault ira.weiny
2020-10-22 22:27 ` [PATCH 10/10] x86/pks: Add PKS test code ira.weiny

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201022222701.887660-3-ira.weiny@intel.com \
    --to=ira.weiny@intel.com \
    --cc=akpm@linux-foundation.org \
    --cc=bp@alien8.de \
    --cc=dan.j.williams@intel.com \
    --cc=dave.hansen@linux.intel.com \
    --cc=fenghua.yu@intel.com \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-kselftest@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=linux-nvdimm@lists.01.org \
    --cc=luto@kernel.org \
    --cc=mingo@redhat.com \
    --cc=peterz@infradead.org \
    --cc=tglx@linutronix.de \
    --cc=x86@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-kselftest Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-kselftest/0 linux-kselftest/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-kselftest linux-kselftest/ https://lore.kernel.org/linux-kselftest \
		linux-kselftest@vger.kernel.org
	public-inbox-index linux-kselftest

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kselftest


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git