* [PATCH v3] selftests/vm: enable running select groups of tests
@ 2022-07-06 20:54 Joel Savitz
2022-07-15 19:54 ` Nico Pache
0 siblings, 1 reply; 6+ messages in thread
From: Joel Savitz @ 2022-07-06 20:54 UTC (permalink / raw)
To: linux-kernel
Cc: Joel Savitz, Andrew Morton, Shuah Khan, linux-mm,
linux-kselftest, Nico Pache
Our memory management kernel CI testing at Red Hat uses the VM
selftests and we have run into two problems:
First, our LTP tests overlap with the VM selftests.
We want to avoid unhelpful redundancy in our testing practices.
Second, we have observed the current run_vmtests.sh to report overall
failure/ambiguous results in the case that a machine lacks the necessary
hardware to perform one or more of the tests. E.g. ksm tests that
require more than one numa node.
We want to be able to run the vm selftests suitable to particular hardware.
Add the ability to run one or more groups of vm tests via run_vmtests.sh
instead of simply all-or-none in order to solve these problems.
Preserve existing default behavior of running all tests when the script
is invoked with no arguments.
Documentation of test groups is included in the patch as follows:
# ./run_vmtests.sh [ -h || --help ]
usage: ./tools/testing/selftests/vm/run_vmtests.sh [ -h | -t "<categories>"]
-t: specify specific categories to tests to run
-h: display this message
The default behavior is to run all tests.
Alternatively, specific groups tests can be run by passing a string
to the -t argument containing one or more of the following categories
separated by spaces:
- mmap
tests for mmap(2)
- gup_test
tests for gup using gup_test interface
- userfaultfd
tests for userfaultfd(2)
- compaction
a test for the patch "Allow compaction of unevictable pages"
- mlock
tests for mlock(2)
- mremap
tests for mremap(2)
- hugevm
tests for very large virtual address space
- vmalloc
vmalloc smoke tests
- hmm
hmm smoke tests
- madv_populate
test memadvise(2) MADV_POPULATE_{READ,WRITE} options
- memfd_secret
test memfd_secret(2)
- process_mrelease
test process_mrelease(2)
- ksm
ksm tests that do not require >=2 NUMA nodes
- ksm_numa
ksm tests that require >=2 NUMA nodes
- pkey
memory protection key tests
example: ./run_vmtests.sh -t "hmm mmap ksm"
Changes from v2:
- rebase onto the mm-everyting branch in
https://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm.git
- integrate this functionality with new the tests
Changes from v1:
- use a command line argument to pass the test categories to the
script instead of an environmet variable
- remove novel prints to avoid messing with extant parsers of this
script
- update the usage text
Signed-off-by: Joel Savitz <jsavitz@redhat.com>
---
tools/testing/selftests/vm/run_vmtests.sh | 241 +++++++++++++++-------
1 file changed, 161 insertions(+), 80 deletions(-)
diff --git a/tools/testing/selftests/vm/run_vmtests.sh b/tools/testing/selftests/vm/run_vmtests.sh
index d84fe0fa15e1..fb72a1338d07 100755
--- a/tools/testing/selftests/vm/run_vmtests.sh
+++ b/tools/testing/selftests/vm/run_vmtests.sh
@@ -1,6 +1,6 @@
#!/bin/bash
# SPDX-License-Identifier: GPL-2.0
-#please run as root
+# Please run as root
# Kselftest framework requirement - SKIP code is 4.
ksft_skip=4
@@ -8,15 +8,75 @@ ksft_skip=4
mnt=./huge
exitcode=0
-#get huge pagesize and freepages from /proc/meminfo
-while read -r name size unit; do
- if [ "$name" = "HugePages_Free:" ]; then
- freepgs="$size"
- fi
- if [ "$name" = "Hugepagesize:" ]; then
- hpgsize_KB="$size"
+usage() {
+ cat <<EOF
+usage: ${BASH_SOURCE[0]:-$0} [ -h | -t "<categories>"]
+ -t: specify specific categories to tests to run
+ -h: display this message
+
+The default behavior is to run all tests.
+
+Alternatively, specific groups tests can be run by passing a string
+to the -t argument containing one or more of the following categories
+separated by spaces:
+- mmap
+ tests for mmap(2)
+- gup_test
+ tests for gup using gup_test interface
+- userfaultfd
+ tests for userfaultfd(2)
+- compaction
+ a test for the patch "Allow compaction of unevictable pages"
+- mlock
+ tests for mlock(2)
+- mremap
+ tests for mremap(2)
+- hugevm
+ tests for very large virtual address space
+- vmalloc
+ vmalloc smoke tests
+- hmm
+ hmm smoke tests
+- madv_populate
+ test memadvise(2) MADV_POPULATE_{READ,WRITE} options
+- memfd_secret
+ test memfd_secret(2)
+- process_mrelease
+ test process_mrelease(2)
+- ksm
+ ksm tests that do not require >=2 NUMA nodes
+- ksm_numa
+ ksm tests that require >=2 NUMA nodes
+- pkey
+ memory protection key tests
+example: ./run_vmtests.sh -t "hmm mmap ksm"
+EOF
+ exit 0
+}
+
+
+while getopts "ht:" OPT; do
+ case ${OPT} in
+ "h") usage ;;
+ "t") TEST_ITEMS=${OPTARG} ;;
+ esac
+done
+shift $((OPTIND -1))
+
+# default behavior: run all tests
+TEST_ITEMS=${TEST_ITEMS:-default}
+
+test_selected() {
+ if [ "$TEST_ITEMS" == "default" ]; then
+ # If no TEST_ITEMS are specified, run all tests
+ return 0
fi
-done < /proc/meminfo
+ echo ${TEST_ITEMS} | grep ${1} 2>&1 >/dev/null
+ return ${?}
+}
+
+# Hugepage setup only needed for hugetlb tests
+if test_selected "hugetlb"; then
# Simple hugetlbfs tests have a hardcoded minimum requirement of
# huge pages totaling 256MB (262144KB) in size. The userfaultfd
@@ -28,7 +88,17 @@ hpgsize_MB=$((hpgsize_KB / 1024))
half_ufd_size_MB=$((((nr_cpus * hpgsize_MB + 127) / 128) * 128))
needmem_KB=$((half_ufd_size_MB * 2 * 1024))
-#set proper nr_hugepages
+# get huge pagesize and freepages from /proc/meminfo
+while read -r name size unit; do
+ if [ "$name" = "HugePages_Free:" ]; then
+ freepgs="$size"
+ fi
+ if [ "$name" = "Hugepagesize:" ]; then
+ hpgsize_KB="$size"
+ fi
+done < /proc/meminfo
+
+# set proper nr_hugepages
if [ -n "$freepgs" ] && [ -n "$hpgsize_KB" ]; then
nr_hugepgs=$(cat /proc/sys/vm/nr_hugepages)
needpgs=$((needmem_KB / hpgsize_KB))
@@ -57,144 +127,155 @@ else
exit 1
fi
-#filter 64bit architectures
+fi # test_selected "hugetlb"
+
+# filter 64bit architectures
ARCH64STR="arm64 ia64 mips64 parisc64 ppc64 ppc64le riscv64 s390x sh64 sparc64 x86_64"
if [ -z "$ARCH" ]; then
ARCH=$(uname -m 2>/dev/null | sed -e 's/aarch64.*/arm64/')
fi
VADDR64=0
-echo "$ARCH64STR" | grep "$ARCH" && VADDR64=1
+echo "$ARCH64STR" | grep "$ARCH" &>/dev/null && VADDR64=1
# Usage: run_test [test binary] [arbitrary test arguments...]
run_test() {
- local title="running $*"
- local sep=$(echo -n "$title" | tr "[:graph:][:space:]" -)
- printf "%s\n%s\n%s\n" "$sep" "$title" "$sep"
-
- "$@"
- local ret=$?
- if [ $ret -eq 0 ]; then
- echo "[PASS]"
- elif [ $ret -eq $ksft_skip ]; then
- echo "[SKIP]"
- exitcode=$ksft_skip
- else
- echo "[FAIL]"
- exitcode=1
- fi
+ if test_selected ${CATEGORY}; then
+ local title="running $*"
+ local sep=$(echo -n "$title" | tr "[:graph:][:space:]" -)
+ printf "%s\n%s\n%s\n" "$sep" "$title" "$sep"
+
+ "$@"
+ local ret=$?
+ if [ $ret -eq 0 ]; then
+ echo "[PASS]"
+ elif [ $ret -eq $ksft_skip ]; then
+ echo "[SKIP]"
+ exitcode=$ksft_skip
+ else
+ echo "[FAIL]"
+ exitcode=1
+ fi
+ fi # test_selected
}
-mkdir "$mnt"
-mount -t hugetlbfs none "$mnt"
+# setup only needed for hugetlb tests
+if test_selected "hugetlb"; then
+ mkdir "$mnt"
+ mount -t hugetlbfs none "$mnt"
+fi
-run_test ./hugepage-mmap
+CATEGORY="hugetlb" run_test ./hugepage-mmap
shmmax=$(cat /proc/sys/kernel/shmmax)
shmall=$(cat /proc/sys/kernel/shmall)
echo 268435456 > /proc/sys/kernel/shmmax
echo 4194304 > /proc/sys/kernel/shmall
-run_test ./hugepage-shm
+CATEGORY="hugetlb" run_test ./hugepage-shm
echo "$shmmax" > /proc/sys/kernel/shmmax
echo "$shmall" > /proc/sys/kernel/shmall
-run_test ./map_hugetlb
+CATEGORY="hugetlb" run_test ./map_hugetlb
-run_test ./hugepage-mremap "$mnt"/huge_mremap
-rm -f "$mnt"/huge_mremap
+CATEGORY="hugetlb" run_test ./hugepage-mremap "$mnt"/huge_mremap
+test_selected "hugetlb" && rm -f "$mnt"/huge_mremap
-run_test ./hugepage-vmemmap
+CATEGORY="hugetlb" run_test ./hugepage-vmemmap
-run_test ./hugetlb-madvise "$mnt"/madvise-test
-rm -f "$mnt"/madvise-test
+CATEGORY="hugetlb" run_test ./hugetlb-madvise "$mnt"/madvise-test
+test_selected "hugetlb" && rm -f "$mnt"/madvise-test
-echo "NOTE: The above hugetlb tests provide minimal coverage. Use"
-echo " https://github.com/libhugetlbfs/libhugetlbfs.git for"
-echo " hugetlb regression testing."
+if test_selected "hugetlb"; then
+ echo "NOTE: These hugetlb tests provide minimal coverage. Use"
+ echo " https://github.com/libhugetlbfs/libhugetlbfs.git for"
+ echo " hugetlb regression testing."
+fi
-run_test ./map_fixed_noreplace
+CATEGORY="mmap" run_test ./map_fixed_noreplace
# get_user_pages_fast() benchmark
-run_test ./gup_test -u
+CATEGORY="gup_test" run_test ./gup_test -u
# pin_user_pages_fast() benchmark
-run_test ./gup_test -a
+CATEGORY="gup_test" run_test ./gup_test -a
# Dump pages 0, 19, and 4096, using pin_user_pages:
-run_test ./gup_test -ct -F 0x1 0 19 0x1000
+CATEGORY="gup_test" run_test ./gup_test -ct -F 0x1 0 19 0x1000
-run_test ./userfaultfd anon 20 16
-run_test ./userfaultfd anon:dev 20 16
+CATEGORY="userfaultfd" run_test ./userfaultfd anon 20 16
+CATEGORY="userfaultfd" run_test ./userfaultfd anon:dev 20 16
# Hugetlb tests require source and destination huge pages. Pass in half the
# size ($half_ufd_size_MB), which is used for *each*.
-run_test ./userfaultfd hugetlb "$half_ufd_size_MB" 32
-run_test ./userfaultfd hugetlb:dev "$half_ufd_size_MB" 32
-run_test ./userfaultfd hugetlb_shared "$half_ufd_size_MB" 32 "$mnt"/uffd-test
+CATEGORY="userfaultfd" run_test ./userfaultfd hugetlb "$half_ufd_size_MB" 32
+CATEGORY="userfaultfd" run_test ./userfaultfd hugetlb:dev "$half_ufd_size_MB" 32
+CATEGORY="userfaultfd" run_test ./userfaultfd hugetlb_shared "$half_ufd_size_MB" 32 "$mnt"/uffd-test
rm -f "$mnt"/uffd-test
-run_test ./userfaultfd hugetlb_shared:dev "$half_ufd_size_MB" 32 "$mnt"/uffd-test
+CATEGORY="userfaultfd" run_test ./userfaultfd hugetlb_shared:dev "$half_ufd_size_MB" 32 "$mnt"/uffd-test
rm -f "$mnt"/uffd-test
-run_test ./userfaultfd shmem 20 16
-run_test ./userfaultfd shmem:dev 20 16
-
-#cleanup
-umount "$mnt"
-rm -rf "$mnt"
-echo "$nr_hugepgs" > /proc/sys/vm/nr_hugepages
+CATEGORY="userfaultfd" run_test ./userfaultfd shmem 20 16
+CATEGORY="userfaultfd" run_test ./userfaultfd shmem:dev 20 16
+
+# cleanup (only needed when running hugetlb tests)
+if test_selected "hugetlb"; then
+ umount "$mnt"
+ rm -rf "$mnt"
+ echo "$nr_hugepgs" > /proc/sys/vm/nr_hugepages
+fi
-run_test ./compaction_test
+CATEGORY="compaction" run_test ./compaction_test
-run_test sudo -u nobody ./on-fault-limit
+CATEGORY="mlock" run_test sudo -u nobody ./on-fault-limit
-run_test ./map_populate
+CATEGORY="mmap" run_test ./map_populate
-run_test ./mlock-random-test
+CATEGORY="mlock" run_test ./mlock-random-test
-run_test ./mlock2-tests
+CATEGORY="mlock" run_test ./mlock2-tests
-run_test ./mrelease_test
+CATEGORY="process_mrelease" run_test ./mrelease_test
-run_test ./mremap_test
+CATEGORY="mremap" run_test ./mremap_test
-run_test ./thuge-gen
+CATEGORY="hugetlb" run_test ./thuge-gen
if [ $VADDR64 -ne 0 ]; then
- run_test ./virtual_address_range
+ CATEGORY="hugevm" run_test ./virtual_address_range
# virtual address 128TB switch test
- run_test ./va_128TBswitch.sh
+ CATEGORY="hugevm" run_test ./va_128TBswitch.sh
fi # VADDR64
# vmalloc stability smoke test
-run_test ./test_vmalloc.sh smoke
+CATEGORY="vmalloc" run_test ./test_vmalloc.sh smoke
-run_test ./mremap_dontunmap
+CATEGORY="mremap" run_test ./mremap_dontunmap
-run_test ./test_hmm.sh smoke
+CATEGORY="hmm" run_test ./test_hmm.sh smoke
# MADV_POPULATE_READ and MADV_POPULATE_WRITE tests
-run_test ./madv_populate
+CATEGORY="madv_populate" run_test ./madv_populate
-run_test ./memfd_secret
+CATEGORY="memfd_secret" run_test ./memfd_secret
# KSM MADV_MERGEABLE test with 10 identical pages
-run_test ./ksm_tests -M -p 10
+CATEGORY="ksm" run_test ./ksm_tests -M -p 10
# KSM unmerge test
-run_test ./ksm_tests -U
+CATEGORY="ksm" run_test ./ksm_tests -U
# KSM test with 10 zero pages and use_zero_pages = 0
-run_test ./ksm_tests -Z -p 10 -z 0
+CATEGORY="ksm" run_test ./ksm_tests -Z -p 10 -z 0
# KSM test with 10 zero pages and use_zero_pages = 1
-run_test ./ksm_tests -Z -p 10 -z 1
+CATEGORY="ksm" run_test ./ksm_tests -Z -p 10 -z 1
# KSM test with 2 NUMA nodes and merge_across_nodes = 1
-run_test ./ksm_tests -N -m 1
+CATEGORY="ksm_numa" run_test ./ksm_tests -N -m 1
# KSM test with 2 NUMA nodes and merge_across_nodes = 0
-run_test ./ksm_tests -N -m 0
+CATEGORY="ksm_numa" run_test ./ksm_tests -N -m 0
# protection_keys tests
if [ -x ./protection_keys_32 ]
then
- run_test ./protection_keys_32
+ CATEGORY="pkey" run_test ./protection_keys_32
fi
if [ -x ./protection_keys_64 ]
then
- run_test ./protection_keys_64
+ CATEGORY="pkey" run_test ./protection_keys_64
fi
exit $exitcode
--
2.31.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH v3] selftests/vm: enable running select groups of tests
2022-07-06 20:54 [PATCH v3] selftests/vm: enable running select groups of tests Joel Savitz
@ 2022-07-15 19:54 ` Nico Pache
2022-07-19 22:27 ` Joel Savitz
0 siblings, 1 reply; 6+ messages in thread
From: Nico Pache @ 2022-07-15 19:54 UTC (permalink / raw)
To: Andrew Morton, Joel Savitz; +Cc: LKML, Shuah Khan, Linux MM, linux-kselftest
Hi Andrew and Joel,
I noticed a flaw in switching to the cmdline argument over the
environment variable. If you are utilizing the exerciser script (in
tools/testing/selftests/run_kselftest.sh), this is not designed to
pass cmdline variables to the individual TEST_PROGS. On the other hand
if we utilize Env. variables we can still specify which tests we'd
like to run. Our infrastructure is designed to utilize this wrapper,
so we inevitably will not be able to use this the way we thought.
Would you be ok with switching back to the initial approach? If so I
believe making the name more specific would be ideal, ie)
VM_TEST_ITEMS.
Cheers,
-- Nico
On Wed, Jul 6, 2022 at 4:55 PM Joel Savitz <jsavitz@redhat.com> wrote:
>
> Our memory management kernel CI testing at Red Hat uses the VM
> selftests and we have run into two problems:
>
> First, our LTP tests overlap with the VM selftests.
>
> We want to avoid unhelpful redundancy in our testing practices.
>
> Second, we have observed the current run_vmtests.sh to report overall
> failure/ambiguous results in the case that a machine lacks the necessary
> hardware to perform one or more of the tests. E.g. ksm tests that
> require more than one numa node.
>
> We want to be able to run the vm selftests suitable to particular hardware.
>
> Add the ability to run one or more groups of vm tests via run_vmtests.sh
> instead of simply all-or-none in order to solve these problems.
>
> Preserve existing default behavior of running all tests when the script
> is invoked with no arguments.
>
> Documentation of test groups is included in the patch as follows:
>
> # ./run_vmtests.sh [ -h || --help ]
>
> usage: ./tools/testing/selftests/vm/run_vmtests.sh [ -h | -t "<categories>"]
> -t: specify specific categories to tests to run
> -h: display this message
>
> The default behavior is to run all tests.
>
> Alternatively, specific groups tests can be run by passing a string
> to the -t argument containing one or more of the following categories
> separated by spaces:
> - mmap
> tests for mmap(2)
> - gup_test
> tests for gup using gup_test interface
> - userfaultfd
> tests for userfaultfd(2)
> - compaction
> a test for the patch "Allow compaction of unevictable pages"
> - mlock
> tests for mlock(2)
> - mremap
> tests for mremap(2)
> - hugevm
> tests for very large virtual address space
> - vmalloc
> vmalloc smoke tests
> - hmm
> hmm smoke tests
> - madv_populate
> test memadvise(2) MADV_POPULATE_{READ,WRITE} options
> - memfd_secret
> test memfd_secret(2)
> - process_mrelease
> test process_mrelease(2)
> - ksm
> ksm tests that do not require >=2 NUMA nodes
> - ksm_numa
> ksm tests that require >=2 NUMA nodes
> - pkey
> memory protection key tests
> example: ./run_vmtests.sh -t "hmm mmap ksm"
>
> Changes from v2:
> - rebase onto the mm-everyting branch in
> https://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm.git
> - integrate this functionality with new the tests
>
> Changes from v1:
> - use a command line argument to pass the test categories to the
> script instead of an environmet variable
> - remove novel prints to avoid messing with extant parsers of this
> script
> - update the usage text
>
> Signed-off-by: Joel Savitz <jsavitz@redhat.com>
> ---
> tools/testing/selftests/vm/run_vmtests.sh | 241 +++++++++++++++-------
> 1 file changed, 161 insertions(+), 80 deletions(-)
>
> diff --git a/tools/testing/selftests/vm/run_vmtests.sh b/tools/testing/selftests/vm/run_vmtests.sh
> index d84fe0fa15e1..fb72a1338d07 100755
> --- a/tools/testing/selftests/vm/run_vmtests.sh
> +++ b/tools/testing/selftests/vm/run_vmtests.sh
> @@ -1,6 +1,6 @@
> #!/bin/bash
> # SPDX-License-Identifier: GPL-2.0
> -#please run as root
> +# Please run as root
>
> # Kselftest framework requirement - SKIP code is 4.
> ksft_skip=4
> @@ -8,15 +8,75 @@ ksft_skip=4
> mnt=./huge
> exitcode=0
>
> -#get huge pagesize and freepages from /proc/meminfo
> -while read -r name size unit; do
> - if [ "$name" = "HugePages_Free:" ]; then
> - freepgs="$size"
> - fi
> - if [ "$name" = "Hugepagesize:" ]; then
> - hpgsize_KB="$size"
> +usage() {
> + cat <<EOF
> +usage: ${BASH_SOURCE[0]:-$0} [ -h | -t "<categories>"]
> + -t: specify specific categories to tests to run
> + -h: display this message
> +
> +The default behavior is to run all tests.
> +
> +Alternatively, specific groups tests can be run by passing a string
> +to the -t argument containing one or more of the following categories
> +separated by spaces:
> +- mmap
> + tests for mmap(2)
> +- gup_test
> + tests for gup using gup_test interface
> +- userfaultfd
> + tests for userfaultfd(2)
> +- compaction
> + a test for the patch "Allow compaction of unevictable pages"
> +- mlock
> + tests for mlock(2)
> +- mremap
> + tests for mremap(2)
> +- hugevm
> + tests for very large virtual address space
> +- vmalloc
> + vmalloc smoke tests
> +- hmm
> + hmm smoke tests
> +- madv_populate
> + test memadvise(2) MADV_POPULATE_{READ,WRITE} options
> +- memfd_secret
> + test memfd_secret(2)
> +- process_mrelease
> + test process_mrelease(2)
> +- ksm
> + ksm tests that do not require >=2 NUMA nodes
> +- ksm_numa
> + ksm tests that require >=2 NUMA nodes
> +- pkey
> + memory protection key tests
> +example: ./run_vmtests.sh -t "hmm mmap ksm"
> +EOF
> + exit 0
> +}
> +
> +
> +while getopts "ht:" OPT; do
> + case ${OPT} in
> + "h") usage ;;
> + "t") TEST_ITEMS=${OPTARG} ;;
> + esac
> +done
> +shift $((OPTIND -1))
> +
> +# default behavior: run all tests
> +TEST_ITEMS=${TEST_ITEMS:-default}
> +
> +test_selected() {
> + if [ "$TEST_ITEMS" == "default" ]; then
> + # If no TEST_ITEMS are specified, run all tests
> + return 0
> fi
> -done < /proc/meminfo
> + echo ${TEST_ITEMS} | grep ${1} 2>&1 >/dev/null
> + return ${?}
> +}
> +
> +# Hugepage setup only needed for hugetlb tests
> +if test_selected "hugetlb"; then
>
> # Simple hugetlbfs tests have a hardcoded minimum requirement of
> # huge pages totaling 256MB (262144KB) in size. The userfaultfd
> @@ -28,7 +88,17 @@ hpgsize_MB=$((hpgsize_KB / 1024))
> half_ufd_size_MB=$((((nr_cpus * hpgsize_MB + 127) / 128) * 128))
> needmem_KB=$((half_ufd_size_MB * 2 * 1024))
>
> -#set proper nr_hugepages
> +# get huge pagesize and freepages from /proc/meminfo
> +while read -r name size unit; do
> + if [ "$name" = "HugePages_Free:" ]; then
> + freepgs="$size"
> + fi
> + if [ "$name" = "Hugepagesize:" ]; then
> + hpgsize_KB="$size"
> + fi
> +done < /proc/meminfo
> +
> +# set proper nr_hugepages
> if [ -n "$freepgs" ] && [ -n "$hpgsize_KB" ]; then
> nr_hugepgs=$(cat /proc/sys/vm/nr_hugepages)
> needpgs=$((needmem_KB / hpgsize_KB))
> @@ -57,144 +127,155 @@ else
> exit 1
> fi
>
> -#filter 64bit architectures
> +fi # test_selected "hugetlb"
> +
> +# filter 64bit architectures
> ARCH64STR="arm64 ia64 mips64 parisc64 ppc64 ppc64le riscv64 s390x sh64 sparc64 x86_64"
> if [ -z "$ARCH" ]; then
> ARCH=$(uname -m 2>/dev/null | sed -e 's/aarch64.*/arm64/')
> fi
> VADDR64=0
> -echo "$ARCH64STR" | grep "$ARCH" && VADDR64=1
> +echo "$ARCH64STR" | grep "$ARCH" &>/dev/null && VADDR64=1
>
> # Usage: run_test [test binary] [arbitrary test arguments...]
> run_test() {
> - local title="running $*"
> - local sep=$(echo -n "$title" | tr "[:graph:][:space:]" -)
> - printf "%s\n%s\n%s\n" "$sep" "$title" "$sep"
> -
> - "$@"
> - local ret=$?
> - if [ $ret -eq 0 ]; then
> - echo "[PASS]"
> - elif [ $ret -eq $ksft_skip ]; then
> - echo "[SKIP]"
> - exitcode=$ksft_skip
> - else
> - echo "[FAIL]"
> - exitcode=1
> - fi
> + if test_selected ${CATEGORY}; then
> + local title="running $*"
> + local sep=$(echo -n "$title" | tr "[:graph:][:space:]" -)
> + printf "%s\n%s\n%s\n" "$sep" "$title" "$sep"
> +
> + "$@"
> + local ret=$?
> + if [ $ret -eq 0 ]; then
> + echo "[PASS]"
> + elif [ $ret -eq $ksft_skip ]; then
> + echo "[SKIP]"
> + exitcode=$ksft_skip
> + else
> + echo "[FAIL]"
> + exitcode=1
> + fi
> + fi # test_selected
> }
>
> -mkdir "$mnt"
> -mount -t hugetlbfs none "$mnt"
> +# setup only needed for hugetlb tests
> +if test_selected "hugetlb"; then
> + mkdir "$mnt"
> + mount -t hugetlbfs none "$mnt"
> +fi
>
> -run_test ./hugepage-mmap
> +CATEGORY="hugetlb" run_test ./hugepage-mmap
>
> shmmax=$(cat /proc/sys/kernel/shmmax)
> shmall=$(cat /proc/sys/kernel/shmall)
> echo 268435456 > /proc/sys/kernel/shmmax
> echo 4194304 > /proc/sys/kernel/shmall
> -run_test ./hugepage-shm
> +CATEGORY="hugetlb" run_test ./hugepage-shm
> echo "$shmmax" > /proc/sys/kernel/shmmax
> echo "$shmall" > /proc/sys/kernel/shmall
>
> -run_test ./map_hugetlb
> +CATEGORY="hugetlb" run_test ./map_hugetlb
>
> -run_test ./hugepage-mremap "$mnt"/huge_mremap
> -rm -f "$mnt"/huge_mremap
> +CATEGORY="hugetlb" run_test ./hugepage-mremap "$mnt"/huge_mremap
> +test_selected "hugetlb" && rm -f "$mnt"/huge_mremap
>
> -run_test ./hugepage-vmemmap
> +CATEGORY="hugetlb" run_test ./hugepage-vmemmap
>
> -run_test ./hugetlb-madvise "$mnt"/madvise-test
> -rm -f "$mnt"/madvise-test
> +CATEGORY="hugetlb" run_test ./hugetlb-madvise "$mnt"/madvise-test
> +test_selected "hugetlb" && rm -f "$mnt"/madvise-test
>
> -echo "NOTE: The above hugetlb tests provide minimal coverage. Use"
> -echo " https://github.com/libhugetlbfs/libhugetlbfs.git for"
> -echo " hugetlb regression testing."
> +if test_selected "hugetlb"; then
> + echo "NOTE: These hugetlb tests provide minimal coverage. Use"
> + echo " https://github.com/libhugetlbfs/libhugetlbfs.git for"
> + echo " hugetlb regression testing."
> +fi
>
> -run_test ./map_fixed_noreplace
> +CATEGORY="mmap" run_test ./map_fixed_noreplace
>
> # get_user_pages_fast() benchmark
> -run_test ./gup_test -u
> +CATEGORY="gup_test" run_test ./gup_test -u
> # pin_user_pages_fast() benchmark
> -run_test ./gup_test -a
> +CATEGORY="gup_test" run_test ./gup_test -a
> # Dump pages 0, 19, and 4096, using pin_user_pages:
> -run_test ./gup_test -ct -F 0x1 0 19 0x1000
> +CATEGORY="gup_test" run_test ./gup_test -ct -F 0x1 0 19 0x1000
>
> -run_test ./userfaultfd anon 20 16
> -run_test ./userfaultfd anon:dev 20 16
> +CATEGORY="userfaultfd" run_test ./userfaultfd anon 20 16
> +CATEGORY="userfaultfd" run_test ./userfaultfd anon:dev 20 16
> # Hugetlb tests require source and destination huge pages. Pass in half the
> # size ($half_ufd_size_MB), which is used for *each*.
> -run_test ./userfaultfd hugetlb "$half_ufd_size_MB" 32
> -run_test ./userfaultfd hugetlb:dev "$half_ufd_size_MB" 32
> -run_test ./userfaultfd hugetlb_shared "$half_ufd_size_MB" 32 "$mnt"/uffd-test
> +CATEGORY="userfaultfd" run_test ./userfaultfd hugetlb "$half_ufd_size_MB" 32
> +CATEGORY="userfaultfd" run_test ./userfaultfd hugetlb:dev "$half_ufd_size_MB" 32
> +CATEGORY="userfaultfd" run_test ./userfaultfd hugetlb_shared "$half_ufd_size_MB" 32 "$mnt"/uffd-test
> rm -f "$mnt"/uffd-test
> -run_test ./userfaultfd hugetlb_shared:dev "$half_ufd_size_MB" 32 "$mnt"/uffd-test
> +CATEGORY="userfaultfd" run_test ./userfaultfd hugetlb_shared:dev "$half_ufd_size_MB" 32 "$mnt"/uffd-test
> rm -f "$mnt"/uffd-test
> -run_test ./userfaultfd shmem 20 16
> -run_test ./userfaultfd shmem:dev 20 16
> -
> -#cleanup
> -umount "$mnt"
> -rm -rf "$mnt"
> -echo "$nr_hugepgs" > /proc/sys/vm/nr_hugepages
> +CATEGORY="userfaultfd" run_test ./userfaultfd shmem 20 16
> +CATEGORY="userfaultfd" run_test ./userfaultfd shmem:dev 20 16
> +
> +# cleanup (only needed when running hugetlb tests)
> +if test_selected "hugetlb"; then
> + umount "$mnt"
> + rm -rf "$mnt"
> + echo "$nr_hugepgs" > /proc/sys/vm/nr_hugepages
> +fi
>
> -run_test ./compaction_test
> +CATEGORY="compaction" run_test ./compaction_test
>
> -run_test sudo -u nobody ./on-fault-limit
> +CATEGORY="mlock" run_test sudo -u nobody ./on-fault-limit
>
> -run_test ./map_populate
> +CATEGORY="mmap" run_test ./map_populate
>
> -run_test ./mlock-random-test
> +CATEGORY="mlock" run_test ./mlock-random-test
>
> -run_test ./mlock2-tests
> +CATEGORY="mlock" run_test ./mlock2-tests
>
> -run_test ./mrelease_test
> +CATEGORY="process_mrelease" run_test ./mrelease_test
>
> -run_test ./mremap_test
> +CATEGORY="mremap" run_test ./mremap_test
>
> -run_test ./thuge-gen
> +CATEGORY="hugetlb" run_test ./thuge-gen
>
> if [ $VADDR64 -ne 0 ]; then
> - run_test ./virtual_address_range
> + CATEGORY="hugevm" run_test ./virtual_address_range
>
> # virtual address 128TB switch test
> - run_test ./va_128TBswitch.sh
> + CATEGORY="hugevm" run_test ./va_128TBswitch.sh
> fi # VADDR64
>
> # vmalloc stability smoke test
> -run_test ./test_vmalloc.sh smoke
> +CATEGORY="vmalloc" run_test ./test_vmalloc.sh smoke
>
> -run_test ./mremap_dontunmap
> +CATEGORY="mremap" run_test ./mremap_dontunmap
>
> -run_test ./test_hmm.sh smoke
> +CATEGORY="hmm" run_test ./test_hmm.sh smoke
>
> # MADV_POPULATE_READ and MADV_POPULATE_WRITE tests
> -run_test ./madv_populate
> +CATEGORY="madv_populate" run_test ./madv_populate
>
> -run_test ./memfd_secret
> +CATEGORY="memfd_secret" run_test ./memfd_secret
>
> # KSM MADV_MERGEABLE test with 10 identical pages
> -run_test ./ksm_tests -M -p 10
> +CATEGORY="ksm" run_test ./ksm_tests -M -p 10
> # KSM unmerge test
> -run_test ./ksm_tests -U
> +CATEGORY="ksm" run_test ./ksm_tests -U
> # KSM test with 10 zero pages and use_zero_pages = 0
> -run_test ./ksm_tests -Z -p 10 -z 0
> +CATEGORY="ksm" run_test ./ksm_tests -Z -p 10 -z 0
> # KSM test with 10 zero pages and use_zero_pages = 1
> -run_test ./ksm_tests -Z -p 10 -z 1
> +CATEGORY="ksm" run_test ./ksm_tests -Z -p 10 -z 1
> # KSM test with 2 NUMA nodes and merge_across_nodes = 1
> -run_test ./ksm_tests -N -m 1
> +CATEGORY="ksm_numa" run_test ./ksm_tests -N -m 1
> # KSM test with 2 NUMA nodes and merge_across_nodes = 0
> -run_test ./ksm_tests -N -m 0
> +CATEGORY="ksm_numa" run_test ./ksm_tests -N -m 0
>
> # protection_keys tests
> if [ -x ./protection_keys_32 ]
> then
> - run_test ./protection_keys_32
> + CATEGORY="pkey" run_test ./protection_keys_32
> fi
>
> if [ -x ./protection_keys_64 ]
> then
> - run_test ./protection_keys_64
> + CATEGORY="pkey" run_test ./protection_keys_64
> fi
>
> exit $exitcode
> --
> 2.31.1
>
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v3] selftests/vm: enable running select groups of tests
2022-07-15 19:54 ` Nico Pache
@ 2022-07-19 22:27 ` Joel Savitz
2022-07-26 10:31 ` Nico Pache
2022-07-26 20:59 ` Shuah Khan
0 siblings, 2 replies; 6+ messages in thread
From: Joel Savitz @ 2022-07-19 22:27 UTC (permalink / raw)
To: Nico Pache; +Cc: Andrew Morton, LKML, Shuah Khan, Linux MM, linux-kselftest
Hello,
Sorry for the late reply.
Setting TEST_ITEMS="xx yy zz" and invoking the script has the same
effect as passing -t "xx yy zz" to the script. VM_TEST_ITEMS may be a
better env variable name however.
Best,
Joel Savitz
On Fri, Jul 15, 2022 at 3:55 PM Nico Pache <npache@redhat.com> wrote:
>
> Hi Andrew and Joel,
>
> I noticed a flaw in switching to the cmdline argument over the
> environment variable. If you are utilizing the exerciser script (in
> tools/testing/selftests/run_kselftest.sh), this is not designed to
> pass cmdline variables to the individual TEST_PROGS. On the other hand
> if we utilize Env. variables we can still specify which tests we'd
> like to run. Our infrastructure is designed to utilize this wrapper,
> so we inevitably will not be able to use this the way we thought.
>
> Would you be ok with switching back to the initial approach? If so I
> believe making the name more specific would be ideal, ie)
> VM_TEST_ITEMS.
>
> Cheers,
> -- Nico
>
> On Wed, Jul 6, 2022 at 4:55 PM Joel Savitz <jsavitz@redhat.com> wrote:
> >
> > Our memory management kernel CI testing at Red Hat uses the VM
> > selftests and we have run into two problems:
> >
> > First, our LTP tests overlap with the VM selftests.
> >
> > We want to avoid unhelpful redundancy in our testing practices.
> >
> > Second, we have observed the current run_vmtests.sh to report overall
> > failure/ambiguous results in the case that a machine lacks the necessary
> > hardware to perform one or more of the tests. E.g. ksm tests that
> > require more than one numa node.
> >
> > We want to be able to run the vm selftests suitable to particular hardware.
> >
> > Add the ability to run one or more groups of vm tests via run_vmtests.sh
> > instead of simply all-or-none in order to solve these problems.
> >
> > Preserve existing default behavior of running all tests when the script
> > is invoked with no arguments.
> >
> > Documentation of test groups is included in the patch as follows:
> >
> > # ./run_vmtests.sh [ -h || --help ]
> >
> > usage: ./tools/testing/selftests/vm/run_vmtests.sh [ -h | -t "<categories>"]
> > -t: specify specific categories to tests to run
> > -h: display this message
> >
> > The default behavior is to run all tests.
> >
> > Alternatively, specific groups tests can be run by passing a string
> > to the -t argument containing one or more of the following categories
> > separated by spaces:
> > - mmap
> > tests for mmap(2)
> > - gup_test
> > tests for gup using gup_test interface
> > - userfaultfd
> > tests for userfaultfd(2)
> > - compaction
> > a test for the patch "Allow compaction of unevictable pages"
> > - mlock
> > tests for mlock(2)
> > - mremap
> > tests for mremap(2)
> > - hugevm
> > tests for very large virtual address space
> > - vmalloc
> > vmalloc smoke tests
> > - hmm
> > hmm smoke tests
> > - madv_populate
> > test memadvise(2) MADV_POPULATE_{READ,WRITE} options
> > - memfd_secret
> > test memfd_secret(2)
> > - process_mrelease
> > test process_mrelease(2)
> > - ksm
> > ksm tests that do not require >=2 NUMA nodes
> > - ksm_numa
> > ksm tests that require >=2 NUMA nodes
> > - pkey
> > memory protection key tests
> > example: ./run_vmtests.sh -t "hmm mmap ksm"
> >
> > Changes from v2:
> > - rebase onto the mm-everyting branch in
> > https://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm.git
> > - integrate this functionality with new the tests
> >
> > Changes from v1:
> > - use a command line argument to pass the test categories to the
> > script instead of an environmet variable
> > - remove novel prints to avoid messing with extant parsers of this
> > script
> > - update the usage text
> >
> > Signed-off-by: Joel Savitz <jsavitz@redhat.com>
> > ---
> > tools/testing/selftests/vm/run_vmtests.sh | 241 +++++++++++++++-------
> > 1 file changed, 161 insertions(+), 80 deletions(-)
> >
> > diff --git a/tools/testing/selftests/vm/run_vmtests.sh b/tools/testing/selftests/vm/run_vmtests.sh
> > index d84fe0fa15e1..fb72a1338d07 100755
> > --- a/tools/testing/selftests/vm/run_vmtests.sh
> > +++ b/tools/testing/selftests/vm/run_vmtests.sh
> > @@ -1,6 +1,6 @@
> > #!/bin/bash
> > # SPDX-License-Identifier: GPL-2.0
> > -#please run as root
> > +# Please run as root
> >
> > # Kselftest framework requirement - SKIP code is 4.
> > ksft_skip=4
> > @@ -8,15 +8,75 @@ ksft_skip=4
> > mnt=./huge
> > exitcode=0
> >
> > -#get huge pagesize and freepages from /proc/meminfo
> > -while read -r name size unit; do
> > - if [ "$name" = "HugePages_Free:" ]; then
> > - freepgs="$size"
> > - fi
> > - if [ "$name" = "Hugepagesize:" ]; then
> > - hpgsize_KB="$size"
> > +usage() {
> > + cat <<EOF
> > +usage: ${BASH_SOURCE[0]:-$0} [ -h | -t "<categories>"]
> > + -t: specify specific categories to tests to run
> > + -h: display this message
> > +
> > +The default behavior is to run all tests.
> > +
> > +Alternatively, specific groups tests can be run by passing a string
> > +to the -t argument containing one or more of the following categories
> > +separated by spaces:
> > +- mmap
> > + tests for mmap(2)
> > +- gup_test
> > + tests for gup using gup_test interface
> > +- userfaultfd
> > + tests for userfaultfd(2)
> > +- compaction
> > + a test for the patch "Allow compaction of unevictable pages"
> > +- mlock
> > + tests for mlock(2)
> > +- mremap
> > + tests for mremap(2)
> > +- hugevm
> > + tests for very large virtual address space
> > +- vmalloc
> > + vmalloc smoke tests
> > +- hmm
> > + hmm smoke tests
> > +- madv_populate
> > + test memadvise(2) MADV_POPULATE_{READ,WRITE} options
> > +- memfd_secret
> > + test memfd_secret(2)
> > +- process_mrelease
> > + test process_mrelease(2)
> > +- ksm
> > + ksm tests that do not require >=2 NUMA nodes
> > +- ksm_numa
> > + ksm tests that require >=2 NUMA nodes
> > +- pkey
> > + memory protection key tests
> > +example: ./run_vmtests.sh -t "hmm mmap ksm"
> > +EOF
> > + exit 0
> > +}
> > +
> > +
> > +while getopts "ht:" OPT; do
> > + case ${OPT} in
> > + "h") usage ;;
> > + "t") TEST_ITEMS=${OPTARG} ;;
> > + esac
> > +done
> > +shift $((OPTIND -1))
> > +
> > +# default behavior: run all tests
> > +TEST_ITEMS=${TEST_ITEMS:-default}
> > +
> > +test_selected() {
> > + if [ "$TEST_ITEMS" == "default" ]; then
> > + # If no TEST_ITEMS are specified, run all tests
> > + return 0
> > fi
> > -done < /proc/meminfo
> > + echo ${TEST_ITEMS} | grep ${1} 2>&1 >/dev/null
> > + return ${?}
> > +}
> > +
> > +# Hugepage setup only needed for hugetlb tests
> > +if test_selected "hugetlb"; then
> >
> > # Simple hugetlbfs tests have a hardcoded minimum requirement of
> > # huge pages totaling 256MB (262144KB) in size. The userfaultfd
> > @@ -28,7 +88,17 @@ hpgsize_MB=$((hpgsize_KB / 1024))
> > half_ufd_size_MB=$((((nr_cpus * hpgsize_MB + 127) / 128) * 128))
> > needmem_KB=$((half_ufd_size_MB * 2 * 1024))
> >
> > -#set proper nr_hugepages
> > +# get huge pagesize and freepages from /proc/meminfo
> > +while read -r name size unit; do
> > + if [ "$name" = "HugePages_Free:" ]; then
> > + freepgs="$size"
> > + fi
> > + if [ "$name" = "Hugepagesize:" ]; then
> > + hpgsize_KB="$size"
> > + fi
> > +done < /proc/meminfo
> > +
> > +# set proper nr_hugepages
> > if [ -n "$freepgs" ] && [ -n "$hpgsize_KB" ]; then
> > nr_hugepgs=$(cat /proc/sys/vm/nr_hugepages)
> > needpgs=$((needmem_KB / hpgsize_KB))
> > @@ -57,144 +127,155 @@ else
> > exit 1
> > fi
> >
> > -#filter 64bit architectures
> > +fi # test_selected "hugetlb"
> > +
> > +# filter 64bit architectures
> > ARCH64STR="arm64 ia64 mips64 parisc64 ppc64 ppc64le riscv64 s390x sh64 sparc64 x86_64"
> > if [ -z "$ARCH" ]; then
> > ARCH=$(uname -m 2>/dev/null | sed -e 's/aarch64.*/arm64/')
> > fi
> > VADDR64=0
> > -echo "$ARCH64STR" | grep "$ARCH" && VADDR64=1
> > +echo "$ARCH64STR" | grep "$ARCH" &>/dev/null && VADDR64=1
> >
> > # Usage: run_test [test binary] [arbitrary test arguments...]
> > run_test() {
> > - local title="running $*"
> > - local sep=$(echo -n "$title" | tr "[:graph:][:space:]" -)
> > - printf "%s\n%s\n%s\n" "$sep" "$title" "$sep"
> > -
> > - "$@"
> > - local ret=$?
> > - if [ $ret -eq 0 ]; then
> > - echo "[PASS]"
> > - elif [ $ret -eq $ksft_skip ]; then
> > - echo "[SKIP]"
> > - exitcode=$ksft_skip
> > - else
> > - echo "[FAIL]"
> > - exitcode=1
> > - fi
> > + if test_selected ${CATEGORY}; then
> > + local title="running $*"
> > + local sep=$(echo -n "$title" | tr "[:graph:][:space:]" -)
> > + printf "%s\n%s\n%s\n" "$sep" "$title" "$sep"
> > +
> > + "$@"
> > + local ret=$?
> > + if [ $ret -eq 0 ]; then
> > + echo "[PASS]"
> > + elif [ $ret -eq $ksft_skip ]; then
> > + echo "[SKIP]"
> > + exitcode=$ksft_skip
> > + else
> > + echo "[FAIL]"
> > + exitcode=1
> > + fi
> > + fi # test_selected
> > }
> >
> > -mkdir "$mnt"
> > -mount -t hugetlbfs none "$mnt"
> > +# setup only needed for hugetlb tests
> > +if test_selected "hugetlb"; then
> > + mkdir "$mnt"
> > + mount -t hugetlbfs none "$mnt"
> > +fi
> >
> > -run_test ./hugepage-mmap
> > +CATEGORY="hugetlb" run_test ./hugepage-mmap
> >
> > shmmax=$(cat /proc/sys/kernel/shmmax)
> > shmall=$(cat /proc/sys/kernel/shmall)
> > echo 268435456 > /proc/sys/kernel/shmmax
> > echo 4194304 > /proc/sys/kernel/shmall
> > -run_test ./hugepage-shm
> > +CATEGORY="hugetlb" run_test ./hugepage-shm
> > echo "$shmmax" > /proc/sys/kernel/shmmax
> > echo "$shmall" > /proc/sys/kernel/shmall
> >
> > -run_test ./map_hugetlb
> > +CATEGORY="hugetlb" run_test ./map_hugetlb
> >
> > -run_test ./hugepage-mremap "$mnt"/huge_mremap
> > -rm -f "$mnt"/huge_mremap
> > +CATEGORY="hugetlb" run_test ./hugepage-mremap "$mnt"/huge_mremap
> > +test_selected "hugetlb" && rm -f "$mnt"/huge_mremap
> >
> > -run_test ./hugepage-vmemmap
> > +CATEGORY="hugetlb" run_test ./hugepage-vmemmap
> >
> > -run_test ./hugetlb-madvise "$mnt"/madvise-test
> > -rm -f "$mnt"/madvise-test
> > +CATEGORY="hugetlb" run_test ./hugetlb-madvise "$mnt"/madvise-test
> > +test_selected "hugetlb" && rm -f "$mnt"/madvise-test
> >
> > -echo "NOTE: The above hugetlb tests provide minimal coverage. Use"
> > -echo " https://github.com/libhugetlbfs/libhugetlbfs.git for"
> > -echo " hugetlb regression testing."
> > +if test_selected "hugetlb"; then
> > + echo "NOTE: These hugetlb tests provide minimal coverage. Use"
> > + echo " https://github.com/libhugetlbfs/libhugetlbfs.git for"
> > + echo " hugetlb regression testing."
> > +fi
> >
> > -run_test ./map_fixed_noreplace
> > +CATEGORY="mmap" run_test ./map_fixed_noreplace
> >
> > # get_user_pages_fast() benchmark
> > -run_test ./gup_test -u
> > +CATEGORY="gup_test" run_test ./gup_test -u
> > # pin_user_pages_fast() benchmark
> > -run_test ./gup_test -a
> > +CATEGORY="gup_test" run_test ./gup_test -a
> > # Dump pages 0, 19, and 4096, using pin_user_pages:
> > -run_test ./gup_test -ct -F 0x1 0 19 0x1000
> > +CATEGORY="gup_test" run_test ./gup_test -ct -F 0x1 0 19 0x1000
> >
> > -run_test ./userfaultfd anon 20 16
> > -run_test ./userfaultfd anon:dev 20 16
> > +CATEGORY="userfaultfd" run_test ./userfaultfd anon 20 16
> > +CATEGORY="userfaultfd" run_test ./userfaultfd anon:dev 20 16
> > # Hugetlb tests require source and destination huge pages. Pass in half the
> > # size ($half_ufd_size_MB), which is used for *each*.
> > -run_test ./userfaultfd hugetlb "$half_ufd_size_MB" 32
> > -run_test ./userfaultfd hugetlb:dev "$half_ufd_size_MB" 32
> > -run_test ./userfaultfd hugetlb_shared "$half_ufd_size_MB" 32 "$mnt"/uffd-test
> > +CATEGORY="userfaultfd" run_test ./userfaultfd hugetlb "$half_ufd_size_MB" 32
> > +CATEGORY="userfaultfd" run_test ./userfaultfd hugetlb:dev "$half_ufd_size_MB" 32
> > +CATEGORY="userfaultfd" run_test ./userfaultfd hugetlb_shared "$half_ufd_size_MB" 32 "$mnt"/uffd-test
> > rm -f "$mnt"/uffd-test
> > -run_test ./userfaultfd hugetlb_shared:dev "$half_ufd_size_MB" 32 "$mnt"/uffd-test
> > +CATEGORY="userfaultfd" run_test ./userfaultfd hugetlb_shared:dev "$half_ufd_size_MB" 32 "$mnt"/uffd-test
> > rm -f "$mnt"/uffd-test
> > -run_test ./userfaultfd shmem 20 16
> > -run_test ./userfaultfd shmem:dev 20 16
> > -
> > -#cleanup
> > -umount "$mnt"
> > -rm -rf "$mnt"
> > -echo "$nr_hugepgs" > /proc/sys/vm/nr_hugepages
> > +CATEGORY="userfaultfd" run_test ./userfaultfd shmem 20 16
> > +CATEGORY="userfaultfd" run_test ./userfaultfd shmem:dev 20 16
> > +
> > +# cleanup (only needed when running hugetlb tests)
> > +if test_selected "hugetlb"; then
> > + umount "$mnt"
> > + rm -rf "$mnt"
> > + echo "$nr_hugepgs" > /proc/sys/vm/nr_hugepages
> > +fi
> >
> > -run_test ./compaction_test
> > +CATEGORY="compaction" run_test ./compaction_test
> >
> > -run_test sudo -u nobody ./on-fault-limit
> > +CATEGORY="mlock" run_test sudo -u nobody ./on-fault-limit
> >
> > -run_test ./map_populate
> > +CATEGORY="mmap" run_test ./map_populate
> >
> > -run_test ./mlock-random-test
> > +CATEGORY="mlock" run_test ./mlock-random-test
> >
> > -run_test ./mlock2-tests
> > +CATEGORY="mlock" run_test ./mlock2-tests
> >
> > -run_test ./mrelease_test
> > +CATEGORY="process_mrelease" run_test ./mrelease_test
> >
> > -run_test ./mremap_test
> > +CATEGORY="mremap" run_test ./mremap_test
> >
> > -run_test ./thuge-gen
> > +CATEGORY="hugetlb" run_test ./thuge-gen
> >
> > if [ $VADDR64 -ne 0 ]; then
> > - run_test ./virtual_address_range
> > + CATEGORY="hugevm" run_test ./virtual_address_range
> >
> > # virtual address 128TB switch test
> > - run_test ./va_128TBswitch.sh
> > + CATEGORY="hugevm" run_test ./va_128TBswitch.sh
> > fi # VADDR64
> >
> > # vmalloc stability smoke test
> > -run_test ./test_vmalloc.sh smoke
> > +CATEGORY="vmalloc" run_test ./test_vmalloc.sh smoke
> >
> > -run_test ./mremap_dontunmap
> > +CATEGORY="mremap" run_test ./mremap_dontunmap
> >
> > -run_test ./test_hmm.sh smoke
> > +CATEGORY="hmm" run_test ./test_hmm.sh smoke
> >
> > # MADV_POPULATE_READ and MADV_POPULATE_WRITE tests
> > -run_test ./madv_populate
> > +CATEGORY="madv_populate" run_test ./madv_populate
> >
> > -run_test ./memfd_secret
> > +CATEGORY="memfd_secret" run_test ./memfd_secret
> >
> > # KSM MADV_MERGEABLE test with 10 identical pages
> > -run_test ./ksm_tests -M -p 10
> > +CATEGORY="ksm" run_test ./ksm_tests -M -p 10
> > # KSM unmerge test
> > -run_test ./ksm_tests -U
> > +CATEGORY="ksm" run_test ./ksm_tests -U
> > # KSM test with 10 zero pages and use_zero_pages = 0
> > -run_test ./ksm_tests -Z -p 10 -z 0
> > +CATEGORY="ksm" run_test ./ksm_tests -Z -p 10 -z 0
> > # KSM test with 10 zero pages and use_zero_pages = 1
> > -run_test ./ksm_tests -Z -p 10 -z 1
> > +CATEGORY="ksm" run_test ./ksm_tests -Z -p 10 -z 1
> > # KSM test with 2 NUMA nodes and merge_across_nodes = 1
> > -run_test ./ksm_tests -N -m 1
> > +CATEGORY="ksm_numa" run_test ./ksm_tests -N -m 1
> > # KSM test with 2 NUMA nodes and merge_across_nodes = 0
> > -run_test ./ksm_tests -N -m 0
> > +CATEGORY="ksm_numa" run_test ./ksm_tests -N -m 0
> >
> > # protection_keys tests
> > if [ -x ./protection_keys_32 ]
> > then
> > - run_test ./protection_keys_32
> > + CATEGORY="pkey" run_test ./protection_keys_32
> > fi
> >
> > if [ -x ./protection_keys_64 ]
> > then
> > - run_test ./protection_keys_64
> > + CATEGORY="pkey" run_test ./protection_keys_64
> > fi
> >
> > exit $exitcode
> > --
> > 2.31.1
> >
>
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v3] selftests/vm: enable running select groups of tests
2022-07-19 22:27 ` Joel Savitz
@ 2022-07-26 10:31 ` Nico Pache
2022-07-26 18:48 ` Andrew Morton
2022-07-26 20:59 ` Shuah Khan
1 sibling, 1 reply; 6+ messages in thread
From: Nico Pache @ 2022-07-26 10:31 UTC (permalink / raw)
To: Joel Savitz; +Cc: Andrew Morton, LKML, Shuah Khan, Linux MM, linux-kselftest
Ok thanks for pointing that out!
Andrew, would it be possible to modify the patch and make the variable
name VM_SELFTEST_ITEMS?
Cheers,
-- Nico
On Tue, Jul 19, 2022 at 6:28 PM Joel Savitz <jsavitz@redhat.com> wrote:
>
> Hello,
>
> Sorry for the late reply.
>
> Setting TEST_ITEMS="xx yy zz" and invoking the script has the same
> effect as passing -t "xx yy zz" to the script. VM_TEST_ITEMS may be a
> better env variable name however.
>
> Best,
> Joel Savitz
>
> On Fri, Jul 15, 2022 at 3:55 PM Nico Pache <npache@redhat.com> wrote:
> >
> > Hi Andrew and Joel,
> >
> > I noticed a flaw in switching to the cmdline argument over the
> > environment variable. If you are utilizing the exerciser script (in
> > tools/testing/selftests/run_kselftest.sh), this is not designed to
> > pass cmdline variables to the individual TEST_PROGS. On the other hand
> > if we utilize Env. variables we can still specify which tests we'd
> > like to run. Our infrastructure is designed to utilize this wrapper,
> > so we inevitably will not be able to use this the way we thought.
> >
> > Would you be ok with switching back to the initial approach? If so I
> > believe making the name more specific would be ideal, ie)
> > VM_TEST_ITEMS.
> >
> > Cheers,
> > -- Nico
> >
> > On Wed, Jul 6, 2022 at 4:55 PM Joel Savitz <jsavitz@redhat.com> wrote:
> > >
> > > Our memory management kernel CI testing at Red Hat uses the VM
> > > selftests and we have run into two problems:
> > >
> > > First, our LTP tests overlap with the VM selftests.
> > >
> > > We want to avoid unhelpful redundancy in our testing practices.
> > >
> > > Second, we have observed the current run_vmtests.sh to report overall
> > > failure/ambiguous results in the case that a machine lacks the necessary
> > > hardware to perform one or more of the tests. E.g. ksm tests that
> > > require more than one numa node.
> > >
> > > We want to be able to run the vm selftests suitable to particular hardware.
> > >
> > > Add the ability to run one or more groups of vm tests via run_vmtests.sh
> > > instead of simply all-or-none in order to solve these problems.
> > >
> > > Preserve existing default behavior of running all tests when the script
> > > is invoked with no arguments.
> > >
> > > Documentation of test groups is included in the patch as follows:
> > >
> > > # ./run_vmtests.sh [ -h || --help ]
> > >
> > > usage: ./tools/testing/selftests/vm/run_vmtests.sh [ -h | -t "<categories>"]
> > > -t: specify specific categories to tests to run
> > > -h: display this message
> > >
> > > The default behavior is to run all tests.
> > >
> > > Alternatively, specific groups tests can be run by passing a string
> > > to the -t argument containing one or more of the following categories
> > > separated by spaces:
> > > - mmap
> > > tests for mmap(2)
> > > - gup_test
> > > tests for gup using gup_test interface
> > > - userfaultfd
> > > tests for userfaultfd(2)
> > > - compaction
> > > a test for the patch "Allow compaction of unevictable pages"
> > > - mlock
> > > tests for mlock(2)
> > > - mremap
> > > tests for mremap(2)
> > > - hugevm
> > > tests for very large virtual address space
> > > - vmalloc
> > > vmalloc smoke tests
> > > - hmm
> > > hmm smoke tests
> > > - madv_populate
> > > test memadvise(2) MADV_POPULATE_{READ,WRITE} options
> > > - memfd_secret
> > > test memfd_secret(2)
> > > - process_mrelease
> > > test process_mrelease(2)
> > > - ksm
> > > ksm tests that do not require >=2 NUMA nodes
> > > - ksm_numa
> > > ksm tests that require >=2 NUMA nodes
> > > - pkey
> > > memory protection key tests
> > > example: ./run_vmtests.sh -t "hmm mmap ksm"
> > >
> > > Changes from v2:
> > > - rebase onto the mm-everyting branch in
> > > https://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm.git
> > > - integrate this functionality with new the tests
> > >
> > > Changes from v1:
> > > - use a command line argument to pass the test categories to the
> > > script instead of an environmet variable
> > > - remove novel prints to avoid messing with extant parsers of this
> > > script
> > > - update the usage text
> > >
> > > Signed-off-by: Joel Savitz <jsavitz@redhat.com>
> > > ---
> > > tools/testing/selftests/vm/run_vmtests.sh | 241 +++++++++++++++-------
> > > 1 file changed, 161 insertions(+), 80 deletions(-)
> > >
> > > diff --git a/tools/testing/selftests/vm/run_vmtests.sh b/tools/testing/selftests/vm/run_vmtests.sh
> > > index d84fe0fa15e1..fb72a1338d07 100755
> > > --- a/tools/testing/selftests/vm/run_vmtests.sh
> > > +++ b/tools/testing/selftests/vm/run_vmtests.sh
> > > @@ -1,6 +1,6 @@
> > > #!/bin/bash
> > > # SPDX-License-Identifier: GPL-2.0
> > > -#please run as root
> > > +# Please run as root
> > >
> > > # Kselftest framework requirement - SKIP code is 4.
> > > ksft_skip=4
> > > @@ -8,15 +8,75 @@ ksft_skip=4
> > > mnt=./huge
> > > exitcode=0
> > >
> > > -#get huge pagesize and freepages from /proc/meminfo
> > > -while read -r name size unit; do
> > > - if [ "$name" = "HugePages_Free:" ]; then
> > > - freepgs="$size"
> > > - fi
> > > - if [ "$name" = "Hugepagesize:" ]; then
> > > - hpgsize_KB="$size"
> > > +usage() {
> > > + cat <<EOF
> > > +usage: ${BASH_SOURCE[0]:-$0} [ -h | -t "<categories>"]
> > > + -t: specify specific categories to tests to run
> > > + -h: display this message
> > > +
> > > +The default behavior is to run all tests.
> > > +
> > > +Alternatively, specific groups tests can be run by passing a string
> > > +to the -t argument containing one or more of the following categories
> > > +separated by spaces:
> > > +- mmap
> > > + tests for mmap(2)
> > > +- gup_test
> > > + tests for gup using gup_test interface
> > > +- userfaultfd
> > > + tests for userfaultfd(2)
> > > +- compaction
> > > + a test for the patch "Allow compaction of unevictable pages"
> > > +- mlock
> > > + tests for mlock(2)
> > > +- mremap
> > > + tests for mremap(2)
> > > +- hugevm
> > > + tests for very large virtual address space
> > > +- vmalloc
> > > + vmalloc smoke tests
> > > +- hmm
> > > + hmm smoke tests
> > > +- madv_populate
> > > + test memadvise(2) MADV_POPULATE_{READ,WRITE} options
> > > +- memfd_secret
> > > + test memfd_secret(2)
> > > +- process_mrelease
> > > + test process_mrelease(2)
> > > +- ksm
> > > + ksm tests that do not require >=2 NUMA nodes
> > > +- ksm_numa
> > > + ksm tests that require >=2 NUMA nodes
> > > +- pkey
> > > + memory protection key tests
> > > +example: ./run_vmtests.sh -t "hmm mmap ksm"
> > > +EOF
> > > + exit 0
> > > +}
> > > +
> > > +
> > > +while getopts "ht:" OPT; do
> > > + case ${OPT} in
> > > + "h") usage ;;
> > > + "t") TEST_ITEMS=${OPTARG} ;;
> > > + esac
> > > +done
> > > +shift $((OPTIND -1))
> > > +
> > > +# default behavior: run all tests
> > > +TEST_ITEMS=${TEST_ITEMS:-default}
> > > +
> > > +test_selected() {
> > > + if [ "$TEST_ITEMS" == "default" ]; then
> > > + # If no TEST_ITEMS are specified, run all tests
> > > + return 0
> > > fi
> > > -done < /proc/meminfo
> > > + echo ${TEST_ITEMS} | grep ${1} 2>&1 >/dev/null
> > > + return ${?}
> > > +}
> > > +
> > > +# Hugepage setup only needed for hugetlb tests
> > > +if test_selected "hugetlb"; then
> > >
> > > # Simple hugetlbfs tests have a hardcoded minimum requirement of
> > > # huge pages totaling 256MB (262144KB) in size. The userfaultfd
> > > @@ -28,7 +88,17 @@ hpgsize_MB=$((hpgsize_KB / 1024))
> > > half_ufd_size_MB=$((((nr_cpus * hpgsize_MB + 127) / 128) * 128))
> > > needmem_KB=$((half_ufd_size_MB * 2 * 1024))
> > >
> > > -#set proper nr_hugepages
> > > +# get huge pagesize and freepages from /proc/meminfo
> > > +while read -r name size unit; do
> > > + if [ "$name" = "HugePages_Free:" ]; then
> > > + freepgs="$size"
> > > + fi
> > > + if [ "$name" = "Hugepagesize:" ]; then
> > > + hpgsize_KB="$size"
> > > + fi
> > > +done < /proc/meminfo
> > > +
> > > +# set proper nr_hugepages
> > > if [ -n "$freepgs" ] && [ -n "$hpgsize_KB" ]; then
> > > nr_hugepgs=$(cat /proc/sys/vm/nr_hugepages)
> > > needpgs=$((needmem_KB / hpgsize_KB))
> > > @@ -57,144 +127,155 @@ else
> > > exit 1
> > > fi
> > >
> > > -#filter 64bit architectures
> > > +fi # test_selected "hugetlb"
> > > +
> > > +# filter 64bit architectures
> > > ARCH64STR="arm64 ia64 mips64 parisc64 ppc64 ppc64le riscv64 s390x sh64 sparc64 x86_64"
> > > if [ -z "$ARCH" ]; then
> > > ARCH=$(uname -m 2>/dev/null | sed -e 's/aarch64.*/arm64/')
> > > fi
> > > VADDR64=0
> > > -echo "$ARCH64STR" | grep "$ARCH" && VADDR64=1
> > > +echo "$ARCH64STR" | grep "$ARCH" &>/dev/null && VADDR64=1
> > >
> > > # Usage: run_test [test binary] [arbitrary test arguments...]
> > > run_test() {
> > > - local title="running $*"
> > > - local sep=$(echo -n "$title" | tr "[:graph:][:space:]" -)
> > > - printf "%s\n%s\n%s\n" "$sep" "$title" "$sep"
> > > -
> > > - "$@"
> > > - local ret=$?
> > > - if [ $ret -eq 0 ]; then
> > > - echo "[PASS]"
> > > - elif [ $ret -eq $ksft_skip ]; then
> > > - echo "[SKIP]"
> > > - exitcode=$ksft_skip
> > > - else
> > > - echo "[FAIL]"
> > > - exitcode=1
> > > - fi
> > > + if test_selected ${CATEGORY}; then
> > > + local title="running $*"
> > > + local sep=$(echo -n "$title" | tr "[:graph:][:space:]" -)
> > > + printf "%s\n%s\n%s\n" "$sep" "$title" "$sep"
> > > +
> > > + "$@"
> > > + local ret=$?
> > > + if [ $ret -eq 0 ]; then
> > > + echo "[PASS]"
> > > + elif [ $ret -eq $ksft_skip ]; then
> > > + echo "[SKIP]"
> > > + exitcode=$ksft_skip
> > > + else
> > > + echo "[FAIL]"
> > > + exitcode=1
> > > + fi
> > > + fi # test_selected
> > > }
> > >
> > > -mkdir "$mnt"
> > > -mount -t hugetlbfs none "$mnt"
> > > +# setup only needed for hugetlb tests
> > > +if test_selected "hugetlb"; then
> > > + mkdir "$mnt"
> > > + mount -t hugetlbfs none "$mnt"
> > > +fi
> > >
> > > -run_test ./hugepage-mmap
> > > +CATEGORY="hugetlb" run_test ./hugepage-mmap
> > >
> > > shmmax=$(cat /proc/sys/kernel/shmmax)
> > > shmall=$(cat /proc/sys/kernel/shmall)
> > > echo 268435456 > /proc/sys/kernel/shmmax
> > > echo 4194304 > /proc/sys/kernel/shmall
> > > -run_test ./hugepage-shm
> > > +CATEGORY="hugetlb" run_test ./hugepage-shm
> > > echo "$shmmax" > /proc/sys/kernel/shmmax
> > > echo "$shmall" > /proc/sys/kernel/shmall
> > >
> > > -run_test ./map_hugetlb
> > > +CATEGORY="hugetlb" run_test ./map_hugetlb
> > >
> > > -run_test ./hugepage-mremap "$mnt"/huge_mremap
> > > -rm -f "$mnt"/huge_mremap
> > > +CATEGORY="hugetlb" run_test ./hugepage-mremap "$mnt"/huge_mremap
> > > +test_selected "hugetlb" && rm -f "$mnt"/huge_mremap
> > >
> > > -run_test ./hugepage-vmemmap
> > > +CATEGORY="hugetlb" run_test ./hugepage-vmemmap
> > >
> > > -run_test ./hugetlb-madvise "$mnt"/madvise-test
> > > -rm -f "$mnt"/madvise-test
> > > +CATEGORY="hugetlb" run_test ./hugetlb-madvise "$mnt"/madvise-test
> > > +test_selected "hugetlb" && rm -f "$mnt"/madvise-test
> > >
> > > -echo "NOTE: The above hugetlb tests provide minimal coverage. Use"
> > > -echo " https://github.com/libhugetlbfs/libhugetlbfs.git for"
> > > -echo " hugetlb regression testing."
> > > +if test_selected "hugetlb"; then
> > > + echo "NOTE: These hugetlb tests provide minimal coverage. Use"
> > > + echo " https://github.com/libhugetlbfs/libhugetlbfs.git for"
> > > + echo " hugetlb regression testing."
> > > +fi
> > >
> > > -run_test ./map_fixed_noreplace
> > > +CATEGORY="mmap" run_test ./map_fixed_noreplace
> > >
> > > # get_user_pages_fast() benchmark
> > > -run_test ./gup_test -u
> > > +CATEGORY="gup_test" run_test ./gup_test -u
> > > # pin_user_pages_fast() benchmark
> > > -run_test ./gup_test -a
> > > +CATEGORY="gup_test" run_test ./gup_test -a
> > > # Dump pages 0, 19, and 4096, using pin_user_pages:
> > > -run_test ./gup_test -ct -F 0x1 0 19 0x1000
> > > +CATEGORY="gup_test" run_test ./gup_test -ct -F 0x1 0 19 0x1000
> > >
> > > -run_test ./userfaultfd anon 20 16
> > > -run_test ./userfaultfd anon:dev 20 16
> > > +CATEGORY="userfaultfd" run_test ./userfaultfd anon 20 16
> > > +CATEGORY="userfaultfd" run_test ./userfaultfd anon:dev 20 16
> > > # Hugetlb tests require source and destination huge pages. Pass in half the
> > > # size ($half_ufd_size_MB), which is used for *each*.
> > > -run_test ./userfaultfd hugetlb "$half_ufd_size_MB" 32
> > > -run_test ./userfaultfd hugetlb:dev "$half_ufd_size_MB" 32
> > > -run_test ./userfaultfd hugetlb_shared "$half_ufd_size_MB" 32 "$mnt"/uffd-test
> > > +CATEGORY="userfaultfd" run_test ./userfaultfd hugetlb "$half_ufd_size_MB" 32
> > > +CATEGORY="userfaultfd" run_test ./userfaultfd hugetlb:dev "$half_ufd_size_MB" 32
> > > +CATEGORY="userfaultfd" run_test ./userfaultfd hugetlb_shared "$half_ufd_size_MB" 32 "$mnt"/uffd-test
> > > rm -f "$mnt"/uffd-test
> > > -run_test ./userfaultfd hugetlb_shared:dev "$half_ufd_size_MB" 32 "$mnt"/uffd-test
> > > +CATEGORY="userfaultfd" run_test ./userfaultfd hugetlb_shared:dev "$half_ufd_size_MB" 32 "$mnt"/uffd-test
> > > rm -f "$mnt"/uffd-test
> > > -run_test ./userfaultfd shmem 20 16
> > > -run_test ./userfaultfd shmem:dev 20 16
> > > -
> > > -#cleanup
> > > -umount "$mnt"
> > > -rm -rf "$mnt"
> > > -echo "$nr_hugepgs" > /proc/sys/vm/nr_hugepages
> > > +CATEGORY="userfaultfd" run_test ./userfaultfd shmem 20 16
> > > +CATEGORY="userfaultfd" run_test ./userfaultfd shmem:dev 20 16
> > > +
> > > +# cleanup (only needed when running hugetlb tests)
> > > +if test_selected "hugetlb"; then
> > > + umount "$mnt"
> > > + rm -rf "$mnt"
> > > + echo "$nr_hugepgs" > /proc/sys/vm/nr_hugepages
> > > +fi
> > >
> > > -run_test ./compaction_test
> > > +CATEGORY="compaction" run_test ./compaction_test
> > >
> > > -run_test sudo -u nobody ./on-fault-limit
> > > +CATEGORY="mlock" run_test sudo -u nobody ./on-fault-limit
> > >
> > > -run_test ./map_populate
> > > +CATEGORY="mmap" run_test ./map_populate
> > >
> > > -run_test ./mlock-random-test
> > > +CATEGORY="mlock" run_test ./mlock-random-test
> > >
> > > -run_test ./mlock2-tests
> > > +CATEGORY="mlock" run_test ./mlock2-tests
> > >
> > > -run_test ./mrelease_test
> > > +CATEGORY="process_mrelease" run_test ./mrelease_test
> > >
> > > -run_test ./mremap_test
> > > +CATEGORY="mremap" run_test ./mremap_test
> > >
> > > -run_test ./thuge-gen
> > > +CATEGORY="hugetlb" run_test ./thuge-gen
> > >
> > > if [ $VADDR64 -ne 0 ]; then
> > > - run_test ./virtual_address_range
> > > + CATEGORY="hugevm" run_test ./virtual_address_range
> > >
> > > # virtual address 128TB switch test
> > > - run_test ./va_128TBswitch.sh
> > > + CATEGORY="hugevm" run_test ./va_128TBswitch.sh
> > > fi # VADDR64
> > >
> > > # vmalloc stability smoke test
> > > -run_test ./test_vmalloc.sh smoke
> > > +CATEGORY="vmalloc" run_test ./test_vmalloc.sh smoke
> > >
> > > -run_test ./mremap_dontunmap
> > > +CATEGORY="mremap" run_test ./mremap_dontunmap
> > >
> > > -run_test ./test_hmm.sh smoke
> > > +CATEGORY="hmm" run_test ./test_hmm.sh smoke
> > >
> > > # MADV_POPULATE_READ and MADV_POPULATE_WRITE tests
> > > -run_test ./madv_populate
> > > +CATEGORY="madv_populate" run_test ./madv_populate
> > >
> > > -run_test ./memfd_secret
> > > +CATEGORY="memfd_secret" run_test ./memfd_secret
> > >
> > > # KSM MADV_MERGEABLE test with 10 identical pages
> > > -run_test ./ksm_tests -M -p 10
> > > +CATEGORY="ksm" run_test ./ksm_tests -M -p 10
> > > # KSM unmerge test
> > > -run_test ./ksm_tests -U
> > > +CATEGORY="ksm" run_test ./ksm_tests -U
> > > # KSM test with 10 zero pages and use_zero_pages = 0
> > > -run_test ./ksm_tests -Z -p 10 -z 0
> > > +CATEGORY="ksm" run_test ./ksm_tests -Z -p 10 -z 0
> > > # KSM test with 10 zero pages and use_zero_pages = 1
> > > -run_test ./ksm_tests -Z -p 10 -z 1
> > > +CATEGORY="ksm" run_test ./ksm_tests -Z -p 10 -z 1
> > > # KSM test with 2 NUMA nodes and merge_across_nodes = 1
> > > -run_test ./ksm_tests -N -m 1
> > > +CATEGORY="ksm_numa" run_test ./ksm_tests -N -m 1
> > > # KSM test with 2 NUMA nodes and merge_across_nodes = 0
> > > -run_test ./ksm_tests -N -m 0
> > > +CATEGORY="ksm_numa" run_test ./ksm_tests -N -m 0
> > >
> > > # protection_keys tests
> > > if [ -x ./protection_keys_32 ]
> > > then
> > > - run_test ./protection_keys_32
> > > + CATEGORY="pkey" run_test ./protection_keys_32
> > > fi
> > >
> > > if [ -x ./protection_keys_64 ]
> > > then
> > > - run_test ./protection_keys_64
> > > + CATEGORY="pkey" run_test ./protection_keys_64
> > > fi
> > >
> > > exit $exitcode
> > > --
> > > 2.31.1
> > >
> >
>
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v3] selftests/vm: enable running select groups of tests
2022-07-26 10:31 ` Nico Pache
@ 2022-07-26 18:48 ` Andrew Morton
0 siblings, 0 replies; 6+ messages in thread
From: Andrew Morton @ 2022-07-26 18:48 UTC (permalink / raw)
To: Nico Pache; +Cc: Joel Savitz, LKML, Shuah Khan, Linux MM, linux-kselftest
On Tue, 26 Jul 2022 06:31:29 -0400 Nico Pache <npache@redhat.com> wrote:
> Ok thanks for pointing that out!
>
> Andrew, would it be possible to modify the patch and make the variable
> name VM_SELFTEST_ITEMS?
Sure. Please send a new patch against linux-next late this week.
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v3] selftests/vm: enable running select groups of tests
2022-07-19 22:27 ` Joel Savitz
2022-07-26 10:31 ` Nico Pache
@ 2022-07-26 20:59 ` Shuah Khan
1 sibling, 0 replies; 6+ messages in thread
From: Shuah Khan @ 2022-07-26 20:59 UTC (permalink / raw)
To: Joel Savitz, Nico Pache
Cc: Andrew Morton, LKML, Shuah Khan, Linux MM, linux-kselftest, Shuah Khan
On 7/19/22 4:27 PM, Joel Savitz wrote:
> Hello,
>
> Sorry for the late reply.
>
> Setting TEST_ITEMS="xx yy zz" and invoking the script has the same
> effect as passing -t "xx yy zz" to the script. VM_TEST_ITEMS may be a
> better env variable name however.
>
> Best,
> Joel Savitz
>
When you are respoding on kernel mailing lists, please bottom post.
Refer to the kernel mailing list communication guidelines.
> On Fri, Jul 15, 2022 at 3:55 PM Nico Pache <npache@redhat.com> wrote:
>>
>> Hi Andrew and Joel,
>>
>> I noticed a flaw in switching to the cmdline argument over the
>> environment variable. If you are utilizing the exerciser script (in
>> tools/testing/selftests/run_kselftest.sh), this is not designed to
>> pass cmdline variables to the individual TEST_PROGS. On the other hand
>> if we utilize Env. variables we can still specify which tests we'd
>> like to run. Our infrastructure is designed to utilize this wrapper,
>> so we inevitably will not be able to use this the way we thought.
>>
>> Would you be ok with switching back to the initial approach? If so I
>> believe making the name more specific would be ideal, ie)
>> VM_TEST_ITEMS.
>>
>> Cheers,
>> -- Nico
>>
>> On Wed, Jul 6, 2022 at 4:55 PM Joel Savitz <jsavitz@redhat.com> wrote:
>>>
>>> Our memory management kernel CI testing at Red Hat uses the VM
>>> selftests and we have run into two problems:
>>>
>>> First, our LTP tests overlap with the VM selftests.
>>>
>>> We want to avoid unhelpful redundancy in our testing practices.
>>>
>>> Second, we have observed the current run_vmtests.sh to report overall
>>> failure/ambiguous results in the case that a machine lacks the necessary
>>> hardware to perform one or more of the tests. E.g. ksm tests that
>>> require more than one numa node.
>>>
>>> We want to be able to run the vm selftests suitable to particular hardware.
>>>
>>> Add the ability to run one or more groups of vm tests via run_vmtests.sh
>>> instead of simply all-or-none in order to solve these problems.
>>>
>>> Preserve existing default behavior of running all tests when the script
>>> is invoked with no arguments.
>>>
>>> Documentation of test groups is included in the patch as follows:
>>>
>>> # ./run_vmtests.sh [ -h || --help ]
>>>
>>> usage: ./tools/testing/selftests/vm/run_vmtests.sh [ -h | -t "<categories>"]
>>> -t: specify specific categories to tests to run
>>> -h: display this message
>>>
>>> The default behavior is to run all tests.
>>>
>>> Alternatively, specific groups tests can be run by passing a string
>>> to the -t argument containing one or more of the following categories
>>> separated by spaces:
>>> - mmap
>>> tests for mmap(2)
>>> - gup_test
>>> tests for gup using gup_test interface
>>> - userfaultfd
>>> tests for userfaultfd(2)
>>> - compaction
>>> a test for the patch "Allow compaction of unevictable pages"
>>> - mlock
>>> tests for mlock(2)
>>> - mremap
>>> tests for mremap(2)
>>> - hugevm
>>> tests for very large virtual address space
>>> - vmalloc
>>> vmalloc smoke tests
>>> - hmm
>>> hmm smoke tests
>>> - madv_populate
>>> test memadvise(2) MADV_POPULATE_{READ,WRITE} options
>>> - memfd_secret
>>> test memfd_secret(2)
>>> - process_mrelease
>>> test process_mrelease(2)
>>> - ksm
>>> ksm tests that do not require >=2 NUMA nodes
>>> - ksm_numa
>>> ksm tests that require >=2 NUMA nodes
>>> - pkey
>>> memory protection key tests
>>> example: ./run_vmtests.sh -t "hmm mmap ksm"
>>>
>>> Changes from v2:
>>> - rebase onto the mm-everyting branch in
>>> https://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm.git
>>> - integrate this functionality with new the tests
>>>
>>> Changes from v1:
>>> - use a command line argument to pass the test categories to the
>>> script instead of an environmet variable
>>> - remove novel prints to avoid messing with extant parsers of this
>>> script
>>> - update the usage text
>>>
>>> Signed-off-by: Joel Savitz <jsavitz@redhat.com>
>>> ---
>>> tools/testing/selftests/vm/run_vmtests.sh | 241 +++++++++++++++-------
>>> 1 file changed, 161 insertions(+), 80 deletions(-)
>>>
>>> diff --git a/tools/testing/selftests/vm/run_vmtests.sh b/tools/testing/selftests/vm/run_vmtests.sh
>>> index d84fe0fa15e1..fb72a1338d07 100755
>>> --- a/tools/testing/selftests/vm/run_vmtests.sh
>>> +++ b/tools/testing/selftests/vm/run_vmtests.sh
>>> @@ -1,6 +1,6 @@
>>> #!/bin/bash
>>> # SPDX-License-Identifier: GPL-2.0
>>> -#please run as root
>>> +# Please run as root
>>>
>>> # Kselftest framework requirement - SKIP code is 4.
>>> ksft_skip=4
>>> @@ -8,15 +8,75 @@ ksft_skip=4
>>> mnt=./huge
>>> exitcode=0
>>>
>>> -#get huge pagesize and freepages from /proc/meminfo
>>> -while read -r name size unit; do
>>> - if [ "$name" = "HugePages_Free:" ]; then
>>> - freepgs="$size"
>>> - fi
>>> - if [ "$name" = "Hugepagesize:" ]; then
>>> - hpgsize_KB="$size"
>>> +usage() {
>>> + cat <<EOF
>>> +usage: ${BASH_SOURCE[0]:-$0} [ -h | -t "<categories>"]
>>> + -t: specify specific categories to tests to run
>>> + -h: display this message
>>> +
>>> +The default behavior is to run all tests.
>>> +
>>> +Alternatively, specific groups tests can be run by passing a string
>>> +to the -t argument containing one or more of the following categories
>>> +separated by spaces:
>>> +- mmap
>>> + tests for mmap(2)
>>> +- gup_test
>>> + tests for gup using gup_test interface
>>> +- userfaultfd
>>> + tests for userfaultfd(2)
>>> +- compaction
>>> + a test for the patch "Allow compaction of unevictable pages"
>>> +- mlock
>>> + tests for mlock(2)
>>> +- mremap
>>> + tests for mremap(2)
>>> +- hugevm
>>> + tests for very large virtual address space
>>> +- vmalloc
>>> + vmalloc smoke tests
>>> +- hmm
>>> + hmm smoke tests
>>> +- madv_populate
>>> + test memadvise(2) MADV_POPULATE_{READ,WRITE} options
>>> +- memfd_secret
>>> + test memfd_secret(2)
>>> +- process_mrelease
>>> + test process_mrelease(2)
>>> +- ksm
>>> + ksm tests that do not require >=2 NUMA nodes
>>> +- ksm_numa
>>> + ksm tests that require >=2 NUMA nodes
>>> +- pkey
>>> + memory protection key tests
>>> +example: ./run_vmtests.sh -t "hmm mmap ksm"
>>> +EOF
>>> + exit 0
>>> +}
>>> +
>>> +
>>> +while getopts "ht:" OPT; do
>>> + case ${OPT} in
>>> + "h") usage ;;
>>> + "t") TEST_ITEMS=${OPTARG} ;;
>>> + esac
>>> +done
>>> +shift $((OPTIND -1))
>>> +
>>> +# default behavior: run all tests
>>> +TEST_ITEMS=${TEST_ITEMS:-default}
>>> +
>>> +test_selected() {
>>> + if [ "$TEST_ITEMS" == "default" ]; then
>>> + # If no TEST_ITEMS are specified, run all tests
>>> + return 0
>>> fi
>>> -done < /proc/meminfo
>>> + echo ${TEST_ITEMS} | grep ${1} 2>&1 >/dev/null
>>> + return ${?}
>>> +}
>>> +
>>> +# Hugepage setup only needed for hugetlb tests
>>> +if test_selected "hugetlb"; then
>>>
>>> # Simple hugetlbfs tests have a hardcoded minimum requirement of
>>> # huge pages totaling 256MB (262144KB) in size. The userfaultfd
>>> @@ -28,7 +88,17 @@ hpgsize_MB=$((hpgsize_KB / 1024))
>>> half_ufd_size_MB=$((((nr_cpus * hpgsize_MB + 127) / 128) * 128))
>>> needmem_KB=$((half_ufd_size_MB * 2 * 1024))
>>>
>>> -#set proper nr_hugepages
>>> +# get huge pagesize and freepages from /proc/meminfo
>>> +while read -r name size unit; do
>>> + if [ "$name" = "HugePages_Free:" ]; then
>>> + freepgs="$size"
>>> + fi
>>> + if [ "$name" = "Hugepagesize:" ]; then
>>> + hpgsize_KB="$size"
>>> + fi
>>> +done < /proc/meminfo
>>> +
>>> +# set proper nr_hugepages
>>> if [ -n "$freepgs" ] && [ -n "$hpgsize_KB" ]; then
>>> nr_hugepgs=$(cat /proc/sys/vm/nr_hugepages)
>>> needpgs=$((needmem_KB / hpgsize_KB))
>>> @@ -57,144 +127,155 @@ else
>>> exit 1
>>> fi
>>>
>>> -#filter 64bit architectures
>>> +fi # test_selected "hugetlb"
>>> +
>>> +# filter 64bit architectures
>>> ARCH64STR="arm64 ia64 mips64 parisc64 ppc64 ppc64le riscv64 s390x sh64 sparc64 x86_64"
>>> if [ -z "$ARCH" ]; then
>>> ARCH=$(uname -m 2>/dev/null | sed -e 's/aarch64.*/arm64/')
>>> fi
>>> VADDR64=0
>>> -echo "$ARCH64STR" | grep "$ARCH" && VADDR64=1
>>> +echo "$ARCH64STR" | grep "$ARCH" &>/dev/null && VADDR64=1
>>>
>>> # Usage: run_test [test binary] [arbitrary test arguments...]
>>> run_test() {
>>> - local title="running $*"
>>> - local sep=$(echo -n "$title" | tr "[:graph:][:space:]" -)
>>> - printf "%s\n%s\n%s\n" "$sep" "$title" "$sep"
>>> -
>>> - "$@"
>>> - local ret=$?
>>> - if [ $ret -eq 0 ]; then
>>> - echo "[PASS]"
>>> - elif [ $ret -eq $ksft_skip ]; then
>>> - echo "[SKIP]"
>>> - exitcode=$ksft_skip
>>> - else
>>> - echo "[FAIL]"
>>> - exitcode=1
>>> - fi
>>> + if test_selected ${CATEGORY}; then
>>> + local title="running $*"
>>> + local sep=$(echo -n "$title" | tr "[:graph:][:space:]" -)
>>> + printf "%s\n%s\n%s\n" "$sep" "$title" "$sep"
>>> +
>>> + "$@"
>>> + local ret=$?
>>> + if [ $ret -eq 0 ]; then
>>> + echo "[PASS]"
>>> + elif [ $ret -eq $ksft_skip ]; then
>>> + echo "[SKIP]"
>>> + exitcode=$ksft_skip
>>> + else
>>> + echo "[FAIL]"
>>> + exitcode=1
>>> + fi
>>> + fi # test_selected
>>> }
>>>
>>> -mkdir "$mnt"
>>> -mount -t hugetlbfs none "$mnt"
>>> +# setup only needed for hugetlb tests
>>> +if test_selected "hugetlb"; then
>>> + mkdir "$mnt"
>>> + mount -t hugetlbfs none "$mnt"
>>> +fi
>>>
>>> -run_test ./hugepage-mmap
>>> +CATEGORY="hugetlb" run_test ./hugepage-mmap
>>>
>>> shmmax=$(cat /proc/sys/kernel/shmmax)
>>> shmall=$(cat /proc/sys/kernel/shmall)
>>> echo 268435456 > /proc/sys/kernel/shmmax
>>> echo 4194304 > /proc/sys/kernel/shmall
>>> -run_test ./hugepage-shm
>>> +CATEGORY="hugetlb" run_test ./hugepage-shm
>>> echo "$shmmax" > /proc/sys/kernel/shmmax
>>> echo "$shmall" > /proc/sys/kernel/shmall
>>>
>>> -run_test ./map_hugetlb
>>> +CATEGORY="hugetlb" run_test ./map_hugetlb
>>>
>>> -run_test ./hugepage-mremap "$mnt"/huge_mremap
>>> -rm -f "$mnt"/huge_mremap
>>> +CATEGORY="hugetlb" run_test ./hugepage-mremap "$mnt"/huge_mremap
>>> +test_selected "hugetlb" && rm -f "$mnt"/huge_mremap
>>>
>>> -run_test ./hugepage-vmemmap
>>> +CATEGORY="hugetlb" run_test ./hugepage-vmemmap
>>>
>>> -run_test ./hugetlb-madvise "$mnt"/madvise-test
>>> -rm -f "$mnt"/madvise-test
>>> +CATEGORY="hugetlb" run_test ./hugetlb-madvise "$mnt"/madvise-test
>>> +test_selected "hugetlb" && rm -f "$mnt"/madvise-test
>>>
>>> -echo "NOTE: The above hugetlb tests provide minimal coverage. Use"
>>> -echo " https://github.com/libhugetlbfs/libhugetlbfs.git for"
>>> -echo " hugetlb regression testing."
>>> +if test_selected "hugetlb"; then
>>> + echo "NOTE: These hugetlb tests provide minimal coverage. Use"
>>> + echo " https://github.com/libhugetlbfs/libhugetlbfs.git for"
>>> + echo " hugetlb regression testing."
>>> +fi
>>>
>>> -run_test ./map_fixed_noreplace
>>> +CATEGORY="mmap" run_test ./map_fixed_noreplace
>>>
>>> # get_user_pages_fast() benchmark
>>> -run_test ./gup_test -u
>>> +CATEGORY="gup_test" run_test ./gup_test -u
>>> # pin_user_pages_fast() benchmark
>>> -run_test ./gup_test -a
>>> +CATEGORY="gup_test" run_test ./gup_test -a
>>> # Dump pages 0, 19, and 4096, using pin_user_pages:
>>> -run_test ./gup_test -ct -F 0x1 0 19 0x1000
>>> +CATEGORY="gup_test" run_test ./gup_test -ct -F 0x1 0 19 0x1000
>>>
>>> -run_test ./userfaultfd anon 20 16
>>> -run_test ./userfaultfd anon:dev 20 16
>>> +CATEGORY="userfaultfd" run_test ./userfaultfd anon 20 16
>>> +CATEGORY="userfaultfd" run_test ./userfaultfd anon:dev 20 16
>>> # Hugetlb tests require source and destination huge pages. Pass in half the
>>> # size ($half_ufd_size_MB), which is used for *each*.
>>> -run_test ./userfaultfd hugetlb "$half_ufd_size_MB" 32
>>> -run_test ./userfaultfd hugetlb:dev "$half_ufd_size_MB" 32
>>> -run_test ./userfaultfd hugetlb_shared "$half_ufd_size_MB" 32 "$mnt"/uffd-test
>>> +CATEGORY="userfaultfd" run_test ./userfaultfd hugetlb "$half_ufd_size_MB" 32
>>> +CATEGORY="userfaultfd" run_test ./userfaultfd hugetlb:dev "$half_ufd_size_MB" 32
>>> +CATEGORY="userfaultfd" run_test ./userfaultfd hugetlb_shared "$half_ufd_size_MB" 32 "$mnt"/uffd-test
>>> rm -f "$mnt"/uffd-test
>>> -run_test ./userfaultfd hugetlb_shared:dev "$half_ufd_size_MB" 32 "$mnt"/uffd-test
>>> +CATEGORY="userfaultfd" run_test ./userfaultfd hugetlb_shared:dev "$half_ufd_size_MB" 32 "$mnt"/uffd-test
>>> rm -f "$mnt"/uffd-test
>>> -run_test ./userfaultfd shmem 20 16
>>> -run_test ./userfaultfd shmem:dev 20 16
>>> -
>>> -#cleanup
>>> -umount "$mnt"
>>> -rm -rf "$mnt"
>>> -echo "$nr_hugepgs" > /proc/sys/vm/nr_hugepages
>>> +CATEGORY="userfaultfd" run_test ./userfaultfd shmem 20 16
>>> +CATEGORY="userfaultfd" run_test ./userfaultfd shmem:dev 20 16
>>> +
>>> +# cleanup (only needed when running hugetlb tests)
>>> +if test_selected "hugetlb"; then
>>> + umount "$mnt"
>>> + rm -rf "$mnt"
>>> + echo "$nr_hugepgs" > /proc/sys/vm/nr_hugepages
>>> +fi
>>>
>>> -run_test ./compaction_test
>>> +CATEGORY="compaction" run_test ./compaction_test
>>>
>>> -run_test sudo -u nobody ./on-fault-limit
>>> +CATEGORY="mlock" run_test sudo -u nobody ./on-fault-limit
>>>
>>> -run_test ./map_populate
>>> +CATEGORY="mmap" run_test ./map_populate
>>>
>>> -run_test ./mlock-random-test
>>> +CATEGORY="mlock" run_test ./mlock-random-test
>>>
>>> -run_test ./mlock2-tests
>>> +CATEGORY="mlock" run_test ./mlock2-tests
>>>
>>> -run_test ./mrelease_test
>>> +CATEGORY="process_mrelease" run_test ./mrelease_test
>>>
>>> -run_test ./mremap_test
>>> +CATEGORY="mremap" run_test ./mremap_test
>>>
>>> -run_test ./thuge-gen
>>> +CATEGORY="hugetlb" run_test ./thuge-gen
>>>
>>> if [ $VADDR64 -ne 0 ]; then
>>> - run_test ./virtual_address_range
>>> + CATEGORY="hugevm" run_test ./virtual_address_range
>>>
>>> # virtual address 128TB switch test
>>> - run_test ./va_128TBswitch.sh
>>> + CATEGORY="hugevm" run_test ./va_128TBswitch.sh
>>> fi # VADDR64
>>>
>>> # vmalloc stability smoke test
>>> -run_test ./test_vmalloc.sh smoke
>>> +CATEGORY="vmalloc" run_test ./test_vmalloc.sh smoke
>>>
>>> -run_test ./mremap_dontunmap
>>> +CATEGORY="mremap" run_test ./mremap_dontunmap
>>>
>>> -run_test ./test_hmm.sh smoke
>>> +CATEGORY="hmm" run_test ./test_hmm.sh smoke
>>>
>>> # MADV_POPULATE_READ and MADV_POPULATE_WRITE tests
>>> -run_test ./madv_populate
>>> +CATEGORY="madv_populate" run_test ./madv_populate
>>>
>>> -run_test ./memfd_secret
>>> +CATEGORY="memfd_secret" run_test ./memfd_secret
>>>
>>> # KSM MADV_MERGEABLE test with 10 identical pages
>>> -run_test ./ksm_tests -M -p 10
>>> +CATEGORY="ksm" run_test ./ksm_tests -M -p 10
>>> # KSM unmerge test
>>> -run_test ./ksm_tests -U
>>> +CATEGORY="ksm" run_test ./ksm_tests -U
>>> # KSM test with 10 zero pages and use_zero_pages = 0
>>> -run_test ./ksm_tests -Z -p 10 -z 0
>>> +CATEGORY="ksm" run_test ./ksm_tests -Z -p 10 -z 0
>>> # KSM test with 10 zero pages and use_zero_pages = 1
>>> -run_test ./ksm_tests -Z -p 10 -z 1
>>> +CATEGORY="ksm" run_test ./ksm_tests -Z -p 10 -z 1
>>> # KSM test with 2 NUMA nodes and merge_across_nodes = 1
>>> -run_test ./ksm_tests -N -m 1
>>> +CATEGORY="ksm_numa" run_test ./ksm_tests -N -m 1
>>> # KSM test with 2 NUMA nodes and merge_across_nodes = 0
>>> -run_test ./ksm_tests -N -m 0
>>> +CATEGORY="ksm_numa" run_test ./ksm_tests -N -m 0
>>>
>>> # protection_keys tests
>>> if [ -x ./protection_keys_32 ]
>>> then
>>> - run_test ./protection_keys_32
>>> + CATEGORY="pkey" run_test ./protection_keys_32
>>> fi
>>>
>>> if [ -x ./protection_keys_64 ]
>>> then
>>> - run_test ./protection_keys_64
>>> + CATEGORY="pkey" run_test ./protection_keys_64
>>> fi
>>>
>>> exit $exitcode
>>> --
>>> 2.31.1
>>>
>>
>
>
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2022-07-26 20:59 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-07-06 20:54 [PATCH v3] selftests/vm: enable running select groups of tests Joel Savitz
2022-07-15 19:54 ` Nico Pache
2022-07-19 22:27 ` Joel Savitz
2022-07-26 10:31 ` Nico Pache
2022-07-26 18:48 ` Andrew Morton
2022-07-26 20:59 ` Shuah Khan
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).