Linux-LEDs Archive on lore.kernel.org
 help / color / Atom feed
From: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
To: matti.vaittinen@fi.rohmeurope.com, mazziesaccount@gmail.com
Cc: Lee Jones <lee.jones@linaro.org>,
	Jacek Anaszewski <jacek.anaszewski@gmail.com>,
	Pavel Machek <pavel@ucw.cz>, Dan Murphy <dmurphy@ti.com>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Mark Brown <broonie@kernel.org>, Jonathan Corbet <corbet@lwn.net>,
	Michael Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@kernel.org>,
	Linus Walleij <linus.walleij@linaro.org>,
	Bartosz Golaszewski <bgolaszewski@baylibre.com>,
	Alessandro Zummo <a.zummo@towertech.it>,
	Alexandre Belloni <alexandre.belloni@bootlin.com>,
	Mauro Carvalho Chehab <mchehab+samsung@kernel.org>,
	Jeff Kirsher <jeffrey.t.kirsher@intel.com>,
	Wolfram Sang <wsa+renesas@sang-engineering.com>,
	Marek Szyprowski <m.szyprowski@samsung.com>,
	Heiner Kallweit <hkallweit1@gmail.com>,
	Nicholas Mc Guire <hofrat@osadl.org>,
	Phil Edworthy <phil.edworthy@renesas.com>,
	linux-leds@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-doc@vger.kernel.org,
	linux-clk@vger.kernel.org, linux-gpio@vger.kernel.org,
	linux-rtc@vger.kernel.org
Subject: [PATCH v5 03/16] dt-bindings: mfd: Document ROHM BD71828 bindings
Date: Mon, 18 Nov 2019 08:54:56 +0200
Message-ID: <00abd88e370ec155b0717413d324a1c96c01a13d.1574059625.git.matti.vaittinen@fi.rohmeurope.com> (raw)
In-Reply-To: <cover.1574059625.git.matti.vaittinen@fi.rohmeurope.com>

ROHM BD71828 Power management IC integrates 7 buck converters, 7 LDOs,
a real-time clock (RTC), 3 GPO/regulator control pins, HALL input
and a 32.768 kHz clock gate.

Document the dt bindings drivers are using.

Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
---

No changes from v4

 .../bindings/mfd/rohm,bd71828-pmic.yaml       | 249 ++++++++++++++++++
 1 file changed, 249 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml

diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml
new file mode 100644
index 000000000000..17ea9fa463e8
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml
@@ -0,0 +1,249 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/rohm,bd71828-pmic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROHM BD71828 Power Management Integrated Circuit bindings
+
+maintainers:
+  - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
+
+description: |
+  BD71828GW is a single-chip power management IC for battery-powered portable
+  devices. The IC integrates 7 buck converters, 7 LDOs, and a 1500 mA
+  single-cell linear charger. Also included is a Coulomb counter, a real-time
+  clock (RTC), and a 32.768 kHz clock gate.
+
+  The BD71828 RUN state is divided into 4 configurable run-levels named RUN0,
+  RUN1, RUN2 and RUN3. Bucks 1, 2, 6 and 7 can be either controlled individually
+  via I2C, or some/all of them can be bound to run-levels and controlled as a
+  group. If bucks are controlled individually these run-levels are ignored. See
+  ../regulator/rohm,bd71828-regulator.yaml for how to define regulator voltages
+  for run-levels. Run-levels can be changed by I2C or GPIO depending on PMIC's
+  OTP configuration.
+
+properties:
+  compatible:
+    const: rohm,bd71828
+
+  reg:
+    description:
+      I2C slave address.
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+    description:
+      The interrupt line the device is connected to.
+
+  gpio-controller: true
+      # Indicate BD71828 acts as a GPIO controller.
+
+  "#gpio-cells":
+    const: 2
+    description: |
+      The first cell is the pin number and the second cell is used to specify
+      flags. See ../gpio/gpio.txt for more information.
+
+  clocks:
+    maxItems: 1
+    description:
+      The parent clock connected to PMIC.
+
+  "#clock-cells":
+    const: 0
+
+  rohm,charger-sense-resistor-ohms:
+    minimum: 10000000
+    maximum: 50000000
+    description: |
+      BD71827 and BD71828 have SAR ADC for measuring charging currents.
+      External sense resistor (RSENSE in data sheet) should be used. If some
+      other but 30MOhm resistor is used the resistance value should be given
+      here in Ohms.
+
+  regulators:
+    $ref: ../regulator/rohm,bd71828-regulator.yaml
+    description:
+      List of child nodes that specify the regulators.
+
+  leds:
+    $ref: ../leds/rohm,bd71828-leds.yaml
+
+  rohm,dvs-vsel-gpios:
+    maxItems: 2
+    description: |
+      GPIOs used to control PMIC run-levels. Should describe two GPIOs.
+      (See run-level control in data-sheet). If this property is omitted but
+      some bucks are marked to be controlled by run-levels - then OTP option
+      allowing run-level control via I2C is assumed.
+
+  gpio-reserved-ranges:
+    description: |
+      Usage of BD71828 GPIO pins can be changed via OTP. This property can be
+      used to mark the pins which should not be configured for GPIO. Please see
+      the ../gpio/gpio.txt for more information.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - "#clock-cells"
+  - regulators
+  - gpio-controller
+  - "#gpio-cells"
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/leds/common.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        pmic: pmic@4b {
+            compatible = "rohm,bd71828";
+            reg = <0x4b>;
+
+            interrupt-parent = <&gpio1>;
+            interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
+
+            clocks = <&osc 0>;
+            #clock-cells = <0>;
+            clock-output-names = "bd71828-32k-out";
+
+            gpio-controller;
+            #gpio-cells = <2>;
+            gpio-reserved-ranges = <0 1>, <2 1>;
+
+            rohm,dvs-vsel-gpios = <&gpio1 12 0>, <&gpio1 13 0>;
+            rohm,charger-sense-resistor-ohms = <10000000>;
+
+            regulators {
+                buck1: BUCK1 {
+                    regulator-name = "buck1";
+                    regulator-min-microvolt = <500000>;
+                    regulator-max-microvolt = <2000000>;
+                    regulator-ramp-delay = <2500>;
+                    rohm,dvs-runlvl-ctrl;
+                    rohm,dvs-runlevel-microvolts  = <500000>,
+                                                    <506250>,
+                                                    <512500>,
+                                                    <518750>;
+                    regulator-boot-on;
+                };
+                buck2: BUCK2 {
+                    regulator-name = "buck2";
+                    regulator-min-microvolt = <500000>;
+                    regulator-max-microvolt = <2000000>;
+                    regulator-ramp-delay = <2500>;
+                    rohm,dvs-runlvl-ctrl;
+                    rohm,dvs-runlevel-microvolts  = <500000>,
+                                                    <506250>,
+                                                    <512500>,
+                                                    <518750>;
+                    regulator-boot-on;
+                };
+                buck3: BUCK3 {
+                    regulator-name = "buck3";
+                    regulator-min-microvolt = <1200000>;
+                    regulator-max-microvolt = <2000000>;
+                    regulator-boot-on;
+                };
+                buck4: BUCK4 {
+                    regulator-name = "buck4";
+                    regulator-min-microvolt = <1000000>;
+                    regulator-max-microvolt = <1800000>;
+                    regulator-boot-on;
+                };
+                buck5: BUCK5 {
+                    regulator-name = "buck5";
+                    regulator-min-microvolt = <2500000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-boot-on;
+                };
+                buck6: BUCK6 {
+                    regulator-name = "buck6";
+                    regulator-min-microvolt = <500000>;
+                    regulator-max-microvolt = <2000000>;
+                    regulator-ramp-delay = <2500>;
+                    rohm,dvs-runlvl-ctrl;
+                    rohm,dvs-runlevel-microvolts  = <500000>,
+                                                    <506250>,
+                                                    <512500>,
+                                                    <518750>;
+                    regulator-boot-on;
+                };
+                buck7: BUCK7 {
+                    regulator-name = "buck7";
+                    regulator-min-microvolt = <500000>;
+                    regulator-max-microvolt = <2000000>;
+                    regulator-ramp-delay = <2500>;
+                    rohm,dvs-runlvl-ctrl;
+                    rohm,dvs-runlevel-microvolts  = <500000>,
+                                                    <506250>,
+                                                    <512500>,
+                                                    <518750>;
+                    regulator-boot-on;
+                };
+                ldo1: LDO1 {
+                    regulator-name = "ldo1";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-boot-on;
+                };
+                ldo2: LDO2 {
+                    regulator-name = "ldo2";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-boot-on;
+                };
+                ldo3: LDO3 {
+                    regulator-name = "ldo3";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-boot-on;
+                };
+                ldo4: LDO4 {
+                    regulator-name = "ldo4";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-boot-on;
+                };
+                ldo5: LDO5 {
+                    regulator-name = "ldo5";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-boot-on;
+                };
+                ldo6: LDO6 {
+                    regulator-name = "ldo6";
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <1800000>;
+                    regulator-boot-on;
+                };
+                ldo7_reg: LDO7 {
+                    regulator-name = "ldo7";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-boot-on;
+                };
+            };
+
+            leds {
+                compatible = "rohm,bd71828-leds";
+
+                led-1 {
+                    rohm,led-compatible = "bd71828-grnled";
+                    function = LED_FUNCTION_INDICATOR;
+                    color = <LED_COLOR_ID_GREEN>;
+                };
+                led-2 {
+                    rohm,led-compatible = "bd71828-ambled";
+                    function = LED_FUNCTION_CHARGING;
+                    color = <LED_COLOR_ID_AMBER>;
+                };
+            };
+        };
+    };
-- 
2.21.0


-- 
Matti Vaittinen, Linux device drivers
ROHM Semiconductors, Finland SWDC
Kiviharjunlenkki 1E
90220 OULU
FINLAND

~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~
Simon says - in Latin please.
~~~ "non cogito me" dixit Rene Descarte, deinde evanescavit ~~~
Thanks to Simon Glass for the translation =] 

  parent reply index

Thread overview: 51+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-18  6:53 [PATCH v5 00/16] Support ROHM BD71828 PMIC Matti Vaittinen
2019-11-18  6:53 ` [PATCH v5 01/16] dt-bindings: regulator: Document ROHM BD71282 regulator bindings Matti Vaittinen
2019-11-18 16:25   ` Mark Brown
2019-11-18 18:03     ` Vaittinen, Matti
2019-11-19 18:13       ` Mark Brown
2019-11-19 18:51         ` Vaittinen, Matti
2019-11-19 19:36           ` Mark Brown
2019-11-29  7:48             ` Vaittinen, Matti
2019-11-29 12:09               ` Mark Brown
2019-12-02  7:57                 ` Vaittinen, Matti
2019-12-02 13:11                   ` Mark Brown
2019-12-02 14:02                     ` Vaittinen, Matti
2019-12-04 12:47                       ` Mark Brown
2019-12-04 13:13                         ` Vaittinen, Matti
2019-12-04 14:14                           ` Mark Brown
2019-12-10 10:39                             ` Vaittinen, Matti
2019-12-10 11:14                 ` Vaittinen, Matti
2019-12-10 12:11                   ` Mark Brown
2019-12-10 12:41                     ` Vaittinen, Matti
2019-12-10 12:45                       ` Mark Brown
2019-12-10 13:07                         ` Vaittinen, Matti
2019-11-22 22:48   ` Rob Herring
2019-11-18  6:54 ` [PATCH v5 02/16] dt-bindings: leds: ROHM BD71282 PMIC LED driver Matti Vaittinen
2019-11-22 23:00   ` Rob Herring
2019-11-18  6:54 ` Matti Vaittinen [this message]
2019-11-22 23:05   ` [PATCH v5 03/16] dt-bindings: mfd: Document ROHM BD71828 bindings Rob Herring
2019-11-18  6:55 ` [PATCH v5 04/16] mfd: rohm PMICs - use platform_device_id to match MFD sub-devices Matti Vaittinen
2019-11-18  6:55 ` [PATCH v5 05/16] mfd: bd71828: Support ROHM BD71828 PMIC - core Matti Vaittinen
2019-11-18  6:56 ` [PATCH v5 06/16] mfd: input: bd71828: Add power-key support Matti Vaittinen
2019-11-18  6:56 ` [PATCH v5 07/16] clk: bd718x7: Support ROHM BD71828 clk block Matti Vaittinen
2019-11-18  6:57 ` [PATCH v5 08/16] regulator: bd718x7: Split driver to common and bd718x7 specific parts Matti Vaittinen
2019-11-18  6:57 ` [PATCH v5 09/16] regulator: bd71828: Basic support for ROHM bd71828 PMIC regulators Matti Vaittinen
2019-11-18 16:20   ` Mark Brown
2019-11-19  9:12     ` Vaittinen, Matti
2019-11-18  6:58 ` [PATCH v5 10/16] gpio: devres: Add devm_gpiod_get_parent_array Matti Vaittinen
2019-11-19 14:43   ` Linus Walleij
2019-11-19 17:54     ` Vaittinen, Matti
2019-11-21 14:13       ` Linus Walleij
2019-11-18  6:59 ` [PATCH v5 11/16] docs: driver-model: Add missing managed GPIO array get functions Matti Vaittinen
2019-11-18  6:59 ` [PATCH v5 12/16] regulator: bd71828: Add GPIO based run-level control for regulators Matti Vaittinen
2019-11-18  7:00 ` [PATCH v5 13/16] rtc: bd70528 add BD71828 support Matti Vaittinen
2019-12-10 13:24   ` Alexandre Belloni
2019-11-18  7:01 ` [PATCH v5 14/16] gpio: bd71828: Initial support for ROHM BD71828 PMIC GPIOs Matti Vaittinen
2019-11-18  9:22   ` Bartosz Golaszewski
2019-11-18  7:03 ` [PATCH v5 15/16] leds: Add common LED binding parsing support to LED class/core Matti Vaittinen
2019-11-18 21:55   ` Jacek Anaszewski
2019-11-19  7:21     ` Vaittinen, Matti
2019-11-19 19:30       ` Jacek Anaszewski
2019-11-20  7:31         ` Vaittinen, Matti
2019-11-19 14:23   ` Vaittinen, Matti
2019-11-18  7:03 ` [PATCH v5 16/16] led: bd71828: Support LED outputs on ROHM BD71828 PMIC Matti Vaittinen

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=00abd88e370ec155b0717413d324a1c96c01a13d.1574059625.git.matti.vaittinen@fi.rohmeurope.com \
    --to=matti.vaittinen@fi.rohmeurope.com \
    --cc=a.zummo@towertech.it \
    --cc=alexandre.belloni@bootlin.com \
    --cc=bgolaszewski@baylibre.com \
    --cc=broonie@kernel.org \
    --cc=corbet@lwn.net \
    --cc=devicetree@vger.kernel.org \
    --cc=dmurphy@ti.com \
    --cc=hkallweit1@gmail.com \
    --cc=hofrat@osadl.org \
    --cc=jacek.anaszewski@gmail.com \
    --cc=jeffrey.t.kirsher@intel.com \
    --cc=lee.jones@linaro.org \
    --cc=lgirdwood@gmail.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-leds@vger.kernel.org \
    --cc=linux-rtc@vger.kernel.org \
    --cc=m.szyprowski@samsung.com \
    --cc=mark.rutland@arm.com \
    --cc=mazziesaccount@gmail.com \
    --cc=mchehab+samsung@kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=pavel@ucw.cz \
    --cc=phil.edworthy@renesas.com \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=wsa+renesas@sang-engineering.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-LEDs Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-leds/0 linux-leds/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-leds linux-leds/ https://lore.kernel.org/linux-leds \
		linux-leds@vger.kernel.org
	public-inbox-index linux-leds

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-leds


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git