Re: [PATCH v12 08/16] dt: bindings: lp55xx: Update binding for Multicolor Framework

[Dan Murphy <dmurphy@ti.com>]

Jacek

On 10/11/19 3:15 PM, Jacek Anaszewski wrote:
> Dan,
>
> On 10/11/19 3:06 PM, Dan Murphy wrote:
>> Update the DT binding to include the properties to use the
>> multicolor framework for the devices that use the LP55xx
>> framework.
>>
>> Signed-off-by: Dan Murphy <dmurphy@ti.com>
>> CC: Tony Lindgren <tony@atomide.com>
>> CC: "Benoît Cousson" <bcousson@baylibre.com>
>> CC: Linus Walleij <linus.walleij@linaro.org>
>> CC: Shawn Guo <shawnguo@kernel.org>
>> CC: Sascha Hauer <s.hauer@pengutronix.de>
>> CC: Pengutronix Kernel Team <kernel@pengutronix.de>
>> CC: Fabio Estevam <festevam@gmail.com>
>> CC: NXP Linux Team <linux-imx@nxp.com>
>> ---
>>   .../devicetree/bindings/leds/leds-lp55xx.txt  | 149 +++++++++++++++---
>>   1 file changed, 124 insertions(+), 25 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/leds/leds-lp55xx.txt b/Documentation/devicetree/bindings/leds/leds-lp55xx.txt
>> index bfe2805c5534..736a2e1538be 100644
>> --- a/Documentation/devicetree/bindings/leds/leds-lp55xx.txt
>> +++ b/Documentation/devicetree/bindings/leds/leds-lp55xx.txt
>> @@ -1,6 +1,8 @@
>>   Binding for TI/National Semiconductor LP55xx LED Drivers
>>   
>>   Required properties:
>> +- #address-cells: 1
>> +- #size-cells: 0
>>   - compatible: one of
>>   	national,lp5521
>>   	national,lp5523
>> @@ -14,6 +16,18 @@ Required properties:
>>   Each child has own specific current settings
>>   - led-cur: Current setting at each LED channel (mA x10, 0 if LED is not connected)
>>   - max-cur: Maximun current at each LED channel.
>> +- reg: Output channel for the LED.  This is zero based channel identifier and
>> +	the data sheet is a one based channel identifier.
>> +	reg value to output to LED output number
>> +	D1 = reg value is 0
>> +	D2 = reg value is 1
>> +	D3 = reg value is 2
>> +	D4 = reg value is 3
>> +	D5 = reg value is 4
>> +	D6 = reg value is 5
>> +	D7 = reg value is 6
>> +	D8 = reg value is 7
>> +	D9 = reg value is 8
>>   
>>   Optional properties:
>>   - enable-gpio: GPIO attached to the chip's enable pin
>> @@ -35,23 +49,28 @@ example 1) LP5521
>>   on channel 0.
>>   
>>   lp5521@32 {
> While at it let's fix node prefix to led-controller.
> It will not break anyone and yet it will adapt the node naming
> to what is now recommended.

I would love to do that but honestly I prefer to fix that in a different 
patch series and not add more changes to this patch review.


>
>> +	#address-cells = <1>;
>> +	#size-cells = <0>;
>>   	compatible = "national,lp5521";
>>   	reg = <0x32>;
>>   	label = "lp5521_pri";
>>   	clock-mode = /bits/ 8 <2>;
>>   
>> -	chan0 {
>> +	chan@0 {
> Similarly in case of every child node:
>
> s/chan/led/
>
>> +		reg = <0>;
>>   		led-cur = /bits/ 8 <0x2f>;
>>   		max-cur = /bits/ 8 <0x5f>;
>>   		linux,default-trigger = "heartbeat";
>>   	};
>>   
>> -	chan1 {
>> +	chan@1 {
>> +		reg = <1>;
>>   		led-cur = /bits/ 8 <0x2f>;
>>   		max-cur = /bits/ 8 <0x5f>;
>>   	};
>>   
>> -	chan2 {
>> +	chan@2 {
>> +		reg = <2>;
>>   		led-cur = /bits/ 8 <0x2f>;
>>   		max-cur = /bits/ 8 <0x5f>;
>>   	};
>> @@ -70,59 +89,70 @@ ASEL1    ASEL0    Address
>>    VEN      VEN       35h
>>   
>>   lp5523@32 {
> s/lp5523/led-controller/
>
>> +	#address-cells = <1>;
>> +	#size-cells = <0>;
>>   	compatible = "national,lp5523";
>>   	reg = <0x32>;
>>   	clock-mode = /bits/ 8 <1>;
>>   
>> -	chan0 {
>> +	chan@0 {
>> +		reg = <0>;
>>   		chan-name = "d1";
>>   		led-cur = /bits/ 8 <0x14>;
>>   		max-cur = /bits/ 8 <0x20>;
>>   	};
>>   
>> -	chan1 {
>> +	chan@1 {
>> +		reg = <1>;
>>   		chan-name = "d2";
>>   		led-cur = /bits/ 8 <0x14>;
>>   		max-cur = /bits/ 8 <0x20>;
>>   	};
>>   
>> -	chan2 {
>> +	chan@2 {
>> +		reg = <2>;
>>   		chan-name = "d3";
>>   		led-cur = /bits/ 8 <0x14>;
>>   		max-cur = /bits/ 8 <0x20>;
>>   	};
>>   
>> -	chan3 {
>> +	chan@3 {
>> +		reg = <3>;
>>   		chan-name = "d4";
>>   		led-cur = /bits/ 8 <0x14>;
>>   		max-cur = /bits/ 8 <0x20>;
>>   	};
>>   
>> -	chan4 {
>> +	chan@4 {
>> +		reg = <4>;
>>   		chan-name = "d5";
>>   		led-cur = /bits/ 8 <0x14>;
>>   		max-cur = /bits/ 8 <0x20>;
>>   	};
>>   
>> -	chan5 {
>> +	chan@5 {
>> +		reg = <5>;
>>   		chan-name = "d6";
>>   		led-cur = /bits/ 8 <0x14>;
>>   		max-cur = /bits/ 8 <0x20>;
>>   	};
>>   
>> -	chan6 {
>> +	chan@6 {
>> +		reg = <6>;
>>   		chan-name = "d7";
>>   		led-cur = /bits/ 8 <0x14>;
>>   		max-cur = /bits/ 8 <0x20>;
>>   	};
>>   
>> -	chan7 {
>> +	chan@7 {
>> +		reg = <7>;
>>   		chan-name = "d8";
>>   		led-cur = /bits/ 8 <0x14>;
>>   		max-cur = /bits/ 8 <0x20>;
>>   	};
>>   
>> -	chan8 {
>> +	chan@8 {
>> +		reg = <8>;
>>   		chan-name = "d9";
>>   		led-cur = /bits/ 8 <0x14>;
>>   		max-cur = /bits/ 8 <0x20>;
>> @@ -133,29 +163,35 @@ example 3) LP5562
>>   4 channels are defined.
>>   
>>   lp5562@30 {
> s/lp5562/led-controller/
>
>> +	#address-cells = <1>;
>> +	#size-cells = <0>;
>>   	compatible = "ti,lp5562";
>>   	reg = <0x30>;
>>   	clock-mode = /bits/8 <2>;
>>   
>> -	chan0 {
>> +	chan@0 {
>> +		reg = <0>;
>>   		chan-name = "R";
>>   		led-cur = /bits/ 8 <0x20>;
>>   		max-cur = /bits/ 8 <0x60>;
>>   	};
>>   
>> -	chan1 {
>> +	chan@1 {
>> +		reg = <1>;
>>   		chan-name = "G";
>>   		led-cur = /bits/ 8 <0x20>;
>>   		max-cur = /bits/ 8 <0x60>;
>>   	};
>>   
>> -	chan2 {
>> +	chan@2 {
>> +		reg = <2>;
>>   		chan-name = "B";
>>   		led-cur = /bits/ 8 <0x20>;
>>   		max-cur = /bits/ 8 <0x60>;
>>   	};
>>   
>> -	chan3 {
>> +	chan@3 {
>> +		reg = <3>;
>>   		chan-name = "W";
>>   		led-cur = /bits/ 8 <0x20>;
>>   		max-cur = /bits/ 8 <0x60>;
>> @@ -167,62 +203,125 @@ example 4) LP8501
>>   Others are same as LP5523.
>>   
>>   lp8501@32 {
> s/lp8501/led-controller/
>
>> +	#address-cells = <1>;
>> +	#size-cells = <0>;
>>   	compatible = "ti,lp8501";
>>   	reg = <0x32>;
>>   	clock-mode = /bits/ 8 <2>;
>>   	pwr-sel = /bits/ 8 <3>;	/* D1~9 connected to VOUT */
>>   
>> -	chan0 {
>> +	chan@0 {
>> +		reg = <0>;
>>   		chan-name = "d1";
>>   		led-cur = /bits/ 8 <0x14>;
>>   		max-cur = /bits/ 8 <0x20>;
>>   	};
>>   
>> -	chan1 {
>> +	chan@1 {
>> +		reg = <1>;
>>   		chan-name = "d2";
>>   		led-cur = /bits/ 8 <0x14>;
>>   		max-cur = /bits/ 8 <0x20>;
>>   	};
>>   
>> -	chan2 {
>> +	chan@2 {
>> +		reg = <2>;
>>   		chan-name = "d3";
>>   		led-cur = /bits/ 8 <0x14>;
>>   		max-cur = /bits/ 8 <0x20>;
>>   	};
>>   
>> -	chan3 {
>> +	chan@3 {
>> +		reg = <3>;
>>   		chan-name = "d4";
>>   		led-cur = /bits/ 8 <0x14>;
>>   		max-cur = /bits/ 8 <0x20>;
>>   	};
>>   
>> -	chan4 {
>> +	chan@4 {
>> +		reg = <4>;
>>   		chan-name = "d5";
>>   		led-cur = /bits/ 8 <0x14>;
>>   		max-cur = /bits/ 8 <0x20>;
>>   	};
>>   
>> -	chan5 {
>> +	chan@5 {
>> +		reg = <5>;
>>   		chan-name = "d6";
>>   		led-cur = /bits/ 8 <0x14>;
>>   		max-cur = /bits/ 8 <0x20>;
>>   	};
>>   
>> -	chan6 {
>> +	chan@6 {
>> +		reg = <6>;
>>   		chan-name = "d7";
>>   		led-cur = /bits/ 8 <0x14>;
>>   		max-cur = /bits/ 8 <0x20>;
>>   	};
>>   
>> -	chan7 {
>> +	chan@7 {
>> +		reg = <7>;
>>   		chan-name = "d8";
>>   		led-cur = /bits/ 8 <0x14>;
>>   		max-cur = /bits/ 8 <0x20>;
>>   	};
>>   
>> -	chan8 {
>> +	chan@8 {
>> +		reg = <8>;
>>   		chan-name = "d9";
>>   		led-cur = /bits/ 8 <0x14>;
>>   		max-cur = /bits/ 8 <0x20>;
>>   	};
>>   };
>> +
>> +Multicolor Framework Support
>> +In addition to the nodes and properties defined above for device support the
>> +properties below are needed for multicolor framework support as defined in
>> +Documentation/devicetree/bindings/leds/leds-class-multicolor.txt
>> +
>> +Required child properties for multicolor framework
>> +	- color : Must be LED_COLOR_ID_MULTI
>> +	- function : see Documentation/devicetree/bindings/leds/common.txt
>> +
>> +Required grandchildren properties
>> +	- reg : This is the LED output of the device
>> +	- color : see Documentation/devicetree/bindings/leds/common.txt
>> +
>> +Multicolor LED example:
>> +lp5523: lp5523@32 {
> Do you really need "lp5523:" node label ?
>
> Besides:
>
> s/lp5523@32/led-controller@32/

This change I will make since I added this.

Dan