From: Dan Murphy <dmurphy@ti.com>
To: robh+dt@kernel.org, jacek.anaszewski@gmail.com, pavel@ucw.cz
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-leds@vger.kernel.org, Dan Murphy <dmurphy@ti.com>
Subject: [PATCH 0/2] LP5024/18 LED introduction
Date: Wed, 19 Dec 2018 10:26:24 -0600 [thread overview]
Message-ID: <20181219162626.12297-1-dmurphy@ti.com> (raw)
Hello
I am introducing the newest of the TI RGB parts the LP5024 and the LP5018.
Now I understand that there is a patchset in the works that changes the way
the LED labeling is created but I wanted to post these patches for comments and
let the maintainers decide whether to pull this in prior to that patchset being
committed.
Dan
Dan Murphy (2):
dt: bindings: lp5024: Introduce the lp5024 and lp5018 RGB driver
leds: lp5024: Add the LP5024/18 RGB LED driver
.../devicetree/bindings/leds/leds-lp5024.txt | 63 ++
drivers/leds/Kconfig | 7 +
drivers/leds/Makefile | 1 +
drivers/leds/leds-lp5024.c | 610 ++++++++++++++++++
4 files changed, 681 insertions(+)
create mode 100644 Documentation/devicetree/bindings/leds/leds-lp5024.txt
create mode 100644 drivers/leds/leds-lp5024.c
--
2.20.0.rc2.7.g965798d1f2
next reply other threads:[~2018-12-19 16:26 UTC|newest]
Thread overview: 106+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-12-19 16:26 Dan Murphy [this message]
2018-12-19 16:26 ` [PATCH 1/2] dt: bindings: lp5024: Introduce the lp5024 and lp5018 RGB driver Dan Murphy
2018-12-28 23:53 ` Rob Herring
2018-12-31 18:54 ` Dan Murphy
2019-01-08 20:33 ` Jacek Anaszewski
2019-01-08 20:53 ` Dan Murphy
2019-01-08 21:16 ` Jacek Anaszewski
2019-01-08 21:22 ` Dan Murphy
2019-01-09 20:12 ` Jacek Anaszewski
2019-01-09 21:12 ` Dan Murphy
2019-01-09 21:28 ` Jacek Anaszewski
2019-01-09 21:31 ` Dan Murphy
2019-01-10 18:44 ` Jacek Anaszewski
2019-01-10 19:22 ` Dan Murphy
2019-01-10 19:57 ` Jacek Anaszewski
2019-01-10 20:43 ` Dan Murphy
2019-01-10 22:03 ` Jacek Anaszewski
2019-01-10 23:51 ` Dan Murphy
2019-01-11 12:38 ` Dan Murphy
2019-01-11 21:52 ` Jacek Anaszewski
2019-01-12 17:09 ` Dan Murphy
2019-01-12 19:48 ` Jacek Anaszewski
2019-01-14 12:27 ` Dan Murphy
2019-01-14 20:11 ` Jacek Anaszewski
2019-01-14 20:14 ` Dan Murphy
2019-01-14 20:28 ` Jacek Anaszewski
2019-01-14 20:29 ` Dan Murphy
2018-12-19 16:26 ` [PATCH 2/2] leds: lp5024: Add the LP5024/18 RGB LED driver Dan Murphy
2018-12-19 19:04 ` Dan Murphy
2018-12-19 19:34 ` Pavel Machek
2018-12-19 19:41 ` Dan Murphy
2018-12-19 20:10 ` Pavel Machek
2018-12-19 20:41 ` Dan Murphy
2018-12-19 21:36 ` Jacek Anaszewski
2018-12-19 21:50 ` Dan Murphy
2018-12-20 12:40 ` Vesa Jääskeläinen
2018-12-20 13:56 ` Dan Murphy
2019-01-01 13:45 ` Vesa Jääskeläinen
2019-01-03 22:05 ` Jacek Anaszewski
2019-01-03 23:19 ` Vesa Jääskeläinen
2019-01-03 23:34 ` Pavel Machek
2019-01-04 19:49 ` Vesa Jääskeläinen
2019-01-04 20:43 ` Pavel Machek
2019-01-04 19:12 ` Jacek Anaszewski
2019-01-04 20:12 ` Pavel Machek
2019-01-04 21:37 ` Jacek Anaszewski
2019-01-04 22:07 ` Pavel Machek
2019-01-05 12:16 ` Jacek Anaszewski
2019-01-05 12:31 ` Pavel Machek
2019-01-05 13:16 ` Jacek Anaszewski
2019-01-05 22:12 ` Generic RGB LED support was " Pavel Machek
2019-01-06 15:52 ` Jacek Anaszewski
2019-01-07 19:13 ` Jacek Anaszewski
2019-01-07 19:36 ` Dan Murphy
2019-01-07 20:59 ` Jacek Anaszewski
2019-01-07 21:14 ` Dan Murphy
2019-01-08 21:18 ` Jacek Anaszewski
2019-01-08 21:25 ` Dan Murphy
2019-01-10 12:46 ` Dan Murphy
2019-01-10 19:23 ` Jacek Anaszewski
2019-01-10 19:58 ` Dan Murphy
2019-01-10 21:02 ` Jacek Anaszewski
2019-01-10 21:07 ` Dan Murphy
2019-01-08 22:59 ` Pavel Machek
2019-01-09 7:11 ` Vesa Jääskeläinen
2019-01-13 16:37 ` Jacek Anaszewski
2019-01-05 0:39 ` Vesa Jääskeläinen
2019-01-07 19:34 ` Dan Murphy
2019-01-09 6:20 ` Vesa Jääskeläinen
2019-01-07 21:13 ` Jacek Anaszewski
2019-01-07 21:15 ` Dan Murphy
2019-01-09 6:46 ` Vesa Jääskeläinen
2019-01-13 16:36 ` Jacek Anaszewski
2018-12-20 20:31 ` Jacek Anaszewski
2018-12-21 7:32 ` Jacek Anaszewski
2018-12-21 13:05 ` Dan Murphy
2018-12-29 18:28 ` Jacek Anaszewski
2018-12-29 19:07 ` Pavel Machek
2018-12-30 17:09 ` Jacek Anaszewski
2018-12-30 17:35 ` Pavel Machek
2018-12-31 15:43 ` Jacek Anaszewski
2018-12-31 15:47 ` Jacek Anaszewski
2018-12-31 19:15 ` Dan Murphy
2019-01-01 14:42 ` Jacek Anaszewski
2019-01-01 18:11 ` Dan Murphy
2019-01-01 22:06 ` Jacek Anaszewski
2018-12-31 16:28 ` Pavel Machek
2019-01-01 14:26 ` Jacek Anaszewski
2018-12-19 22:03 ` Pavel Machek
2018-12-19 22:08 ` Dan Murphy
2018-12-19 22:27 ` Pavel Machek
2018-12-20 1:31 ` Dan Murphy
2018-12-20 9:06 ` Pavel Machek
2018-12-20 14:03 ` Dan Murphy
2019-01-08 21:10 ` Jacek Anaszewski
2019-01-08 21:17 ` Dan Murphy
2019-07-22 20:59 ` Backlight in motorola Droid 4 Pavel Machek
2019-07-23 15:53 ` Dan Murphy
2019-07-24 8:22 ` Pavel Machek
2019-07-24 12:45 ` Pavel Machek
2019-07-24 15:10 ` Dan Murphy
2019-07-24 15:22 ` Dan Murphy
2019-07-26 14:38 ` Dan Murphy
2019-07-29 22:00 ` Pavel Machek
2019-07-30 18:21 ` Dan Murphy
2019-07-30 21:52 ` Pavel Machek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181219162626.12297-1-dmurphy@ti.com \
--to=dmurphy@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=jacek.anaszewski@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-leds@vger.kernel.org \
--cc=pavel@ucw.cz \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).