Re: [PATCH 1/2] dt: bindings: lp5024: Introduce the lp5024 and lp5018 RGB driver

[Rob Herring <robh@kernel.org>]

On Wed, Dec 19, 2018 at 10:26:25AM -0600, Dan Murphy wrote:
> Introduce the bindings for the Texas Instruments LP5024 and the LP5018
> RGB LED device driver.  The LP5024/18 can control RGB LEDs individually
> or as part of a control bank group.  These devices have the ability
> to adjust the mixing control for the RGB LEDs to obtain different colors
> independent of the overall brightness of the LED grouping.
> 
> Datasheet:
> http://www.ti.com/lit/ds/symlink/lp5024.pdf
> 
> Signed-off-by: Dan Murphy <dmurphy@ti.com>
> ---
>  .../devicetree/bindings/leds/leds-lp5024.txt  | 63 +++++++++++++++++++
>  1 file changed, 63 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/leds/leds-lp5024.txt
> 
> diff --git a/Documentation/devicetree/bindings/leds/leds-lp5024.txt b/Documentation/devicetree/bindings/leds/leds-lp5024.txt
> new file mode 100644
> index 000000000000..9567aa6f7813
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/leds/leds-lp5024.txt
> @@ -0,0 +1,63 @@
> +* Texas Instruments - LP5024/18 RGB LED driver
> +
> +The LM3692x is an ultra-compact, highly efficient,
> +white-LED driver designed for LCD display backlighting.

Leftover copy-n-paste?

> +
> +The main difference between the LP5024 and L5018 is the number of
> +RGB LEDs they support.  The LP5024 supports twenty four strings while the
> +LP5018 supports eighteen strings.
> +
> +Required properties:
> +	- compatible:
> +		"ti,lp5018"
> +		"ti,lp5024"
> +	- reg :  I2C slave address
> +	- #address-cells : 1
> +	- #size-cells : 0
> +
> +Optional properties:
> +	- enable-gpios : gpio pin to enable/disable the device.
> +	- vled-supply : LED supply
> +
> +Required child properties:
> +	- reg : Is the child node iteration.
> +	- led-sources : LP5024 - 0 - 7
> +			LP5018 - 0 - 5
> +			Declares the LED string or strings that the child node
> +			will control.  If ti,control-bank is set then this
> +			property will contain multiple LED IDs.
> +
> +Optional child properties:
> +	- label : see Documentation/devicetree/bindings/leds/common.txt
> +	- linux,default-trigger :
> +	   see Documentation/devicetree/bindings/leds/common.txt
> +	- ti,control-bank : Indicates that the LED strings declared in the
> +			    led-sources property are grouped within a control
> +			    bank for brightness and mixing control.
> +
> +Example:
> +
> +led-controller@28 {
> +	compatible = "ti,lp5024";
> +	reg = <0x28>;
> +	#address-cells = <1>;
> +	#size-cells = <0>;
> +
> +	enable-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
> +	vled-supply = <&vbatt>;
> +
> +	led@0 {
> +		reg = <0>;
> +		led-sources = <1>;
> +	};
> +
> +	led@1 {
> +		reg = <1>;
> +		led-sources = <0 6>;
> +		ti,control-bank;
> +	};
> +
> +}
> +
> +For more product information please see the link below:
> +http://www.ti.com/lit/ds/symlink/lp5024.pdf
> -- 
> 2.20.0.rc2.7.g965798d1f2
>