Linux-LEDs Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH v9 00/15] Multicolor Framework
@ 2019-09-25 17:46 Dan Murphy
  2019-09-25 17:46 ` [PATCH v9 01/15] leds: multicolor: Add sysfs interface definition Dan Murphy
                   ` (14 more replies)
  0 siblings, 15 replies; 38+ messages in thread
From: Dan Murphy @ 2019-09-25 17:46 UTC (permalink / raw)
  To: jacek.anaszewski, pavel
  Cc: linux-leds, linux-kernel, Dan Murphy, linus.walleij, shawnguo,
	Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam,
	NXP Linux Team, Tony Lindgren, Benoît Cousson

Hello

For those I have added to this patchset this is a new LED framework that will
group monochrome LEDs into a directory under the parent LED class device. I have
CC'd you on this because you maintain a device tree file that contains one of
the devices affected by this change.  Most notably the change is to add the
reg property to each LED child node to denote the output channel that the node
is to use.  This not only is required for the Multicolor framework but also gives
flexibilty in DT design to be able to not be bound to sequential channel
numbering.

There are many changes from v8 to this patchset from Jacek's comments.
v8 series
https://lore.kernel.org/patchwork/project/lkml/list/?series=411331

Most notably
Removal of get/set_brightness ops
Dereferencing the monochrome LED intensity from the multicolor structure as
opposed to the ops.
Update for LP55xx DT properties to include the reg property to identify the
output channel for multicolor and non-multicolor use cases.  This also allows
HW designers to skip output channels if they desire.
Updated the corresponding affect device tree files to add the reg property
Checkpatch error fixes for the lp55xx common

These changes were tested using the LP50xx evms and LP5523 EVM connected to a
BeagleBone black device.

Dan

Dan Murphy (15):
  leds: multicolor: Add sysfs interface definition
  dt: bindings: Add multicolor class dt bindings documention
  dt-bindings: leds: Add multicolor ID to the color ID list
  leds: Add multicolor ID to the color ID list
  leds: multicolor: Introduce a multicolor class definition
  dt: bindings: lp50xx: Introduce the lp50xx family of RGB drivers
  leds: lp50xx: Add the LP50XX family of the RGB LED driver
  dt: bindings: lp55xx: Be consistent in the document with LED
  dt: bindings: lp55xx: Update binding for Multicolor Framework
  ARM: dts: n900: Add reg property to the LP5523 channel node
  ARM: dts: imx6dl-yapp4: Add reg property to the lp5562 channel node
  ARM: dts: ste-href: Add reg property to the LP5521 channel nodes
  leds: lp55xx: Update the lp55xx to use the multi color framework
  leds: lp55xx: Fix checkpatch file permissions issues
  leds: lp5523: Fix checkpatch issues in the code

 .../ABI/testing/sysfs-class-led-multicolor    |  35 +
 .../bindings/leds/leds-class-multicolor.txt   |  98 +++
 .../devicetree/bindings/leds/leds-lp50xx.txt  | 148 ++++
 .../devicetree/bindings/leds/leds-lp55xx.txt  | 105 ++-
 Documentation/leds/index.rst                  |   1 +
 Documentation/leds/leds-class-multicolor.rst  |  96 +++
 arch/arm/boot/dts/imx6dl-yapp4-common.dtsi    |   6 +
 arch/arm/boot/dts/omap3-n900.dts              |  11 +
 arch/arm/boot/dts/ste-href.dtsi               |  10 +
 drivers/leds/Kconfig                          |  22 +
 drivers/leds/Makefile                         |   2 +
 drivers/leds/led-class-multicolor.c           | 220 +++++
 drivers/leds/led-core.c                       |   1 +
 drivers/leds/leds-lp50xx.c                    | 767 ++++++++++++++++++
 drivers/leds/leds-lp5523.c                    |  32 +-
 drivers/leds/leds-lp55xx-common.c             | 172 +++-
 drivers/leds/leds-lp55xx-common.h             |  11 +
 include/dt-bindings/leds/common.h             |   3 +-
 include/linux/led-class-multicolor.h          |  74 ++
 include/linux/platform_data/leds-lp55xx.h     |   6 +
 20 files changed, 1771 insertions(+), 49 deletions(-)
 create mode 100644 Documentation/ABI/testing/sysfs-class-led-multicolor
 create mode 100644 Documentation/devicetree/bindings/leds/leds-class-multicolor.txt
 create mode 100644 Documentation/devicetree/bindings/leds/leds-lp50xx.txt
 create mode 100644 Documentation/leds/leds-class-multicolor.rst
 create mode 100644 drivers/leds/led-class-multicolor.c
 create mode 100644 drivers/leds/leds-lp50xx.c
 create mode 100644 include/linux/led-class-multicolor.h

-- 
2.22.0.214.g8dca754b1e


^ permalink raw reply	[flat|nested] 38+ messages in thread

* [PATCH v9 01/15] leds: multicolor: Add sysfs interface definition
  2019-09-25 17:46 [PATCH v9 00/15] Multicolor Framework Dan Murphy
@ 2019-09-25 17:46 ` Dan Murphy
  2019-09-25 20:58   ` Jacek Anaszewski
  2019-09-26 11:10   ` Pavel Machek
  2019-09-25 17:46 ` [PATCH v9 02/15] dt: bindings: Add multicolor class dt bindings documention Dan Murphy
                   ` (13 subsequent siblings)
  14 siblings, 2 replies; 38+ messages in thread
From: Dan Murphy @ 2019-09-25 17:46 UTC (permalink / raw)
  To: jacek.anaszewski, pavel
  Cc: linux-leds, linux-kernel, Dan Murphy, linus.walleij, shawnguo,
	Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam,
	NXP Linux Team, Tony Lindgren, Benoît Cousson

Add a documentation of LED Multicolor LED class specific
sysfs attributes.

Add multicolor framework class documentation describing the
usage of the files created.

Signed-off-by: Dan Murphy <dmurphy@ti.com>
---
 .../ABI/testing/sysfs-class-led-multicolor    | 35 +++++++
 Documentation/leds/index.rst                  |  1 +
 Documentation/leds/leds-class-multicolor.rst  | 96 +++++++++++++++++++
 3 files changed, 132 insertions(+)
 create mode 100644 Documentation/ABI/testing/sysfs-class-led-multicolor
 create mode 100644 Documentation/leds/leds-class-multicolor.rst

diff --git a/Documentation/ABI/testing/sysfs-class-led-multicolor b/Documentation/ABI/testing/sysfs-class-led-multicolor
new file mode 100644
index 000000000000..65cb43de26e6
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-led-multicolor
@@ -0,0 +1,35 @@
+What:		/sys/class/leds/<led>/brightness
+Date:		Sept 2019
+KernelVersion:	5.5
+Contact:	Dan Murphy <dmurphy@ti.com>
+Description:	read/write
+		Writing to this file will update all LEDs within the group to a
+		calculated percentage of what each color LED intensity is set
+		to. The percentage is calculated via the equation below:
+
+		led_brightness = brightness * <color>_intensity/<color>_max_intensity
+
+		For additional details please refer to
+		Documentation/leds/leds-class-multicolor.rst.
+
+		The value of the color is from 0 to
+		/sys/class/leds/<led>/max_brightness.
+
+What:		/sys/class/leds/<led>/colors/<color>_intensity
+Date:		Sept 2019
+KernelVersion:	5.5
+Contact:	Dan Murphy <dmurphy@ti.com>
+Description:	read/write
+		The <color>_intensity file is created based on the color
+		defined by the registrar of the class.
+		There is one file per color presented.
+
+		The value of the color is from 0 to
+		/sys/class/leds/<led>/colors/<color>_max_intensity.
+
+What:		/sys/class/leds/<led>/colors/<color>_max_intensity
+Date:		Sept 2019
+KernelVersion:	5.5
+Contact:	Dan Murphy <dmurphy@ti.com>
+Description:	read only
+		Maximum intensity level for the LED color.
diff --git a/Documentation/leds/index.rst b/Documentation/leds/index.rst
index 060f4e485897..bc70c6aa7138 100644
--- a/Documentation/leds/index.rst
+++ b/Documentation/leds/index.rst
@@ -9,6 +9,7 @@ LEDs
 
    leds-class
    leds-class-flash
+   leds-class-multicolor
    ledtrig-oneshot
    ledtrig-transient
    ledtrig-usbport
diff --git a/Documentation/leds/leds-class-multicolor.rst b/Documentation/leds/leds-class-multicolor.rst
new file mode 100644
index 000000000000..87a1588d7619
--- /dev/null
+++ b/Documentation/leds/leds-class-multicolor.rst
@@ -0,0 +1,96 @@
+====================================
+Multi Color LED handling under Linux
+====================================
+
+Description
+===========
+The multi color class groups monochrome LEDs and allows controlling two
+aspects of the final combined color: hue and lightness. The former is
+controlled via <color>_intensity files and the latter is controlled
+via brightness file.
+
+For more details on hue and lightness notions please refer to
+https://en.wikipedia.org/wiki/CIECAM02.
+
+Note that intensity files only cache the written value and the actual
+change of hardware state occurs upon writing brightness file. This
+allows for changing many factors of the perceived color in a virtually
+unnoticeable way for the human observer.
+
+Multicolor Class Control
+========================
+The multicolor class presents the LED groups under a directory called "colors".
+This directory is a child under the LED parent node created by the led_class
+framework.  The led_class framework is documented in led-class.rst within this
+documentation directory.
+
+Each colored LED will have two files created under the colors directory
+<color>_intensity and <color>_max_intensity. These files will contain
+one of LED_COLOR_ID_* definitions from the header
+include/dt-bindings/leds/common.h.
+
+Directory Layout Example
+========================
+root:/sys/class/leds/rgb:grouped_leds# ls -lR colors/
+-rw-rwxr-- 1 root root 4096 Jul 7 03:10 red_max_intensity
+--w--wx-w- 1 root root 4096 Jul 7 03:10 red_intensity
+-rw-rwxr-- 1 root root 4096 Jul 7 03:10 green_max_intensity
+--w--wx-w- 1 root root 4096 Jul 7 03:10 green_intensity
+-rw-rwxr-- 1 root root 4096 Jul 7 03:10 blue_max_intensity
+--w--wx-w- 1 root root 4096 Jul 7 03:10 blue_intensity
+
+Multicolor Class Brightness Control
+===================================
+The multiclor class framework will calculate each monochrome LEDs intensity.
+
+The brightness level for each LED is calculated based on the color LED
+intensity setting divided by the color LED max intensity setting multiplied by
+the requested brightness.
+
+led_brightness = brightness * <color>_intensity/<color>_max_intensity
+
+Example:
+Three LEDs are present in the group as defined in "Directory Layout Example"
+within this document.
+
+A user first writes the color LED brightness file with the brightness level that
+is necessary to achieve a blueish violet output from the RGB LED group.
+
+echo 138 > /sys/class/leds/rgb:grouped_leds/red_intensity
+echo 43 > /sys/class/leds/rgb:grouped_leds/green_intensity
+echo 226 > /sys/class/leds/rgb:grouped_leds/blue_intensity
+
+red -
+	intensity = 138
+	max_intensity = 255
+green -
+	intensity = 43
+	max_intensity = 255
+blue -
+	intensity = 226
+	max_intensity = 255
+
+The user can control the brightness of that RGB group by writing the parent
+'brightness' control.  Assuming a parent max_brightness of 255 the user may want
+to dim the LED color group to half.  The user would write a value of 128 to the
+parent brightness file then the values written to each LED will be adjusted
+base on this value
+
+cat /sys/class/leds/rgb:grouped_leds/max_brightness
+255
+echo 128 > /sys/class/leds/rgb:grouped_leds/brightness
+
+adjusted_red_value = 128 * 138/255 = 69
+adjusted_green_value = 128 * 43/255 = 21
+adjusted_blue_value = 128 * 226/255 = 113
+
+Reading the parent brightness file will return the current brightness value of
+the color LED group.
+
+cat /sys/class/leds/rgb:grouped_leds/max_brightness
+255
+
+echo 128 > /sys/class/leds/rgb:grouped_leds/brightness
+
+cat /sys/class/leds/rgb:grouped_leds/brightness
+128
-- 
2.22.0.214.g8dca754b1e


^ permalink raw reply	[flat|nested] 38+ messages in thread

* [PATCH v9 02/15] dt: bindings: Add multicolor class dt bindings documention
  2019-09-25 17:46 [PATCH v9 00/15] Multicolor Framework Dan Murphy
  2019-09-25 17:46 ` [PATCH v9 01/15] leds: multicolor: Add sysfs interface definition Dan Murphy
@ 2019-09-25 17:46 ` Dan Murphy
  2019-09-25 17:46 ` [PATCH v9 03/15] dt-bindings: leds: Add multicolor ID to the color ID list Dan Murphy
                   ` (12 subsequent siblings)
  14 siblings, 0 replies; 38+ messages in thread
From: Dan Murphy @ 2019-09-25 17:46 UTC (permalink / raw)
  To: jacek.anaszewski, pavel; +Cc: linux-leds, linux-kernel, Dan Murphy

Add DT bindings for the LEDs multicolor class framework.

Signed-off-by: Dan Murphy <dmurphy@ti.com>
---
 .../bindings/leds/leds-class-multicolor.txt   | 98 +++++++++++++++++++
 1 file changed, 98 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/leds/leds-class-multicolor.txt

diff --git a/Documentation/devicetree/bindings/leds/leds-class-multicolor.txt b/Documentation/devicetree/bindings/leds/leds-class-multicolor.txt
new file mode 100644
index 000000000000..8619c9bf1811
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-class-multicolor.txt
@@ -0,0 +1,98 @@
+* Multicolor LED properties
+
+Bindings for multi color LEDs show how to describe current outputs of
+either integrated multi-color LED elements (like RGB, RGBW, RGBWA-UV
+etc.) or standalone LEDs, to achieve logically grouped multi-color LED
+modules. This is achieved by adding multi-led nodes layer to the
+monochrome LED bindings.
+
+The nodes and properties defined in this document are unique to the multicolor
+LED class.  Common LED nodes and properties are inherited from the common.txt
+within this documentation directory.
+
+Required LED Child properties:
+	- color : For multicolor LED support this property should be defined as
+		  LED_COLOR_ID_MULTI and further definition can be found in
+		  include/linux/leds/common.h.
+
+led-controller@30 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	compatible = "ti,lp5024";
+	reg = <0x29>;
+
+	multi-led@1 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <1>;
+		color = <LED_COLOR_ID_MULTI>;
+		function = LED_FUNCTION_STATUS;
+
+
+		led@3 {
+			reg = <3>;
+			color = <LED_COLOR_ID_RED>;
+		};
+
+		led@4 {
+			reg = <4>;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+
+		led@5 {
+			reg = <5>;
+			color = <LED_COLOR_ID_BLUE>;
+		};
+	};
+
+	multi-led@2 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		color = <LED_COLOR_ID_MULTI>;
+		function = LED_FUNCTION_ACTIVITY;
+		reg = <2>;
+		ti,led-bank = <2 3 5>;
+
+		led@6 {
+			reg = <0x6>;
+			color = <LED_COLOR_ID_RED>;
+			led-sources = <6 9 15>;
+		};
+
+		led@7 {
+			reg = <0x7>;
+			color = <LED_COLOR_ID_GREEN>;
+			led-sources = <7 10 16>;
+		};
+
+		led@8 {
+			reg = <0x8>;
+			color = <LED_COLOR_ID_BLUE>;
+			led-sources = <8 11 17>;
+		};
+	};
+
+	multi-led@4 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <4>;
+		color = <LED_COLOR_ID_MULTI>;
+		function = LED_FUNCTION_ACTIVITY;
+
+		led@12 {
+			reg = <12>;
+			color = <LED_COLOR_ID_RED>;
+		};
+
+		led@13 {
+			reg = <13>;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+
+		led@14 {
+			reg = <14>;
+			color = <LED_COLOR_ID_BLUE>;
+		};
+	};
+
+};
-- 
2.22.0.214.g8dca754b1e


^ permalink raw reply	[flat|nested] 38+ messages in thread

* [PATCH v9 03/15] dt-bindings: leds: Add multicolor ID to the color ID list
  2019-09-25 17:46 [PATCH v9 00/15] Multicolor Framework Dan Murphy
  2019-09-25 17:46 ` [PATCH v9 01/15] leds: multicolor: Add sysfs interface definition Dan Murphy
  2019-09-25 17:46 ` [PATCH v9 02/15] dt: bindings: Add multicolor class dt bindings documention Dan Murphy
@ 2019-09-25 17:46 ` Dan Murphy
  2019-09-25 17:46 ` [PATCH v9 04/15] " Dan Murphy
                   ` (11 subsequent siblings)
  14 siblings, 0 replies; 38+ messages in thread
From: Dan Murphy @ 2019-09-25 17:46 UTC (permalink / raw)
  To: jacek.anaszewski, pavel; +Cc: linux-leds, linux-kernel, Dan Murphy

Add a new color ID that is declared as MULTICOLOR as with the
multicolor framework declaring a definitive color is not accurate
as the node can contain multiple colors.

Signed-off-by: Dan Murphy <dmurphy@ti.com>
---
 include/dt-bindings/leds/common.h | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/include/dt-bindings/leds/common.h b/include/dt-bindings/leds/common.h
index 9e1256a7c1bf..7006d15f71e8 100644
--- a/include/dt-bindings/leds/common.h
+++ b/include/dt-bindings/leds/common.h
@@ -29,7 +29,8 @@
 #define LED_COLOR_ID_VIOLET	5
 #define LED_COLOR_ID_YELLOW	6
 #define LED_COLOR_ID_IR		7
-#define LED_COLOR_ID_MAX	8
+#define LED_COLOR_ID_MULTI	8
+#define LED_COLOR_ID_MAX	9
 
 /* Standard LED functions */
 #define LED_FUNCTION_ACTIVITY "activity"
-- 
2.22.0.214.g8dca754b1e


^ permalink raw reply	[flat|nested] 38+ messages in thread

* [PATCH v9 04/15] leds: Add multicolor ID to the color ID list
  2019-09-25 17:46 [PATCH v9 00/15] Multicolor Framework Dan Murphy
                   ` (2 preceding siblings ...)
  2019-09-25 17:46 ` [PATCH v9 03/15] dt-bindings: leds: Add multicolor ID to the color ID list Dan Murphy
@ 2019-09-25 17:46 ` " Dan Murphy
  2019-09-25 17:46 ` [PATCH v9 05/15] leds: multicolor: Introduce a multicolor class definition Dan Murphy
                   ` (10 subsequent siblings)
  14 siblings, 0 replies; 38+ messages in thread
From: Dan Murphy @ 2019-09-25 17:46 UTC (permalink / raw)
  To: jacek.anaszewski, pavel; +Cc: linux-leds, linux-kernel, Dan Murphy

Add a new color ID that is declared as MULTICOLOR as with the
multicolor framework declaring a definitive color is not accurate
as the node can contain multiple colors.

Signed-off-by: Dan Murphy <dmurphy@ti.com>
---
 drivers/leds/led-core.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/leds/led-core.c b/drivers/leds/led-core.c
index f1f718dbe0f8..846248a0693d 100644
--- a/drivers/leds/led-core.c
+++ b/drivers/leds/led-core.c
@@ -34,6 +34,7 @@ const char * const led_colors[LED_COLOR_ID_MAX] = {
 	[LED_COLOR_ID_VIOLET] = "violet",
 	[LED_COLOR_ID_YELLOW] = "yellow",
 	[LED_COLOR_ID_IR] = "ir",
+	[LED_COLOR_ID_MULTI] = "multicolor",
 };
 EXPORT_SYMBOL_GPL(led_colors);
 
-- 
2.22.0.214.g8dca754b1e


^ permalink raw reply	[flat|nested] 38+ messages in thread

* [PATCH v9 05/15] leds: multicolor: Introduce a multicolor class definition
  2019-09-25 17:46 [PATCH v9 00/15] Multicolor Framework Dan Murphy
                   ` (3 preceding siblings ...)
  2019-09-25 17:46 ` [PATCH v9 04/15] " Dan Murphy
@ 2019-09-25 17:46 ` Dan Murphy
  2019-09-25 21:12   ` Jacek Anaszewski
  2019-09-25 17:46 ` [PATCH v9 06/15] dt: bindings: lp50xx: Introduce the lp50xx family of RGB drivers Dan Murphy
                   ` (9 subsequent siblings)
  14 siblings, 1 reply; 38+ messages in thread
From: Dan Murphy @ 2019-09-25 17:46 UTC (permalink / raw)
  To: jacek.anaszewski, pavel; +Cc: linux-leds, linux-kernel, Dan Murphy

Introduce a multicolor class that groups colored LEDs
within a LED node.

The multi color class groups monochrome LEDs and allows controlling two
aspects of the final combined color: hue and lightness. The former is
controlled via <color>_intensity files and the latter is controlled
via brightness file.

Signed-off-by: Dan Murphy <dmurphy@ti.com>
---
 drivers/leds/Kconfig                 |  10 ++
 drivers/leds/Makefile                |   1 +
 drivers/leds/led-class-multicolor.c  | 220 +++++++++++++++++++++++++++
 include/linux/led-class-multicolor.h |  74 +++++++++
 4 files changed, 305 insertions(+)
 create mode 100644 drivers/leds/led-class-multicolor.c
 create mode 100644 include/linux/led-class-multicolor.h

diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 6e7703fd03d0..cfb1ebb6517f 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -30,6 +30,16 @@ config LEDS_CLASS_FLASH
 	  for the flash related features of a LED device. It can be built
 	  as a module.
 
+config LEDS_CLASS_MULTI_COLOR
+	tristate "LED Mulit Color LED Class Support"
+	depends on LEDS_CLASS
+	help
+	  This option enables the multicolor LED sysfs class in /sys/class/leds.
+	  It wraps LED class and adds multicolor LED specific sysfs attributes
+	  and kernel internal API to it. You'll need this to provide support
+	  for multicolor LEDs that are grouped together. This class is not
+	  intended for single color LEDs. It can be built as a module.
+
 config LEDS_BRIGHTNESS_HW_CHANGED
 	bool "LED Class brightness_hw_changed attribute support"
 	depends on LEDS_CLASS
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index 2da39e896ce8..841038cfe35b 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -4,6 +4,7 @@
 obj-$(CONFIG_NEW_LEDS)			+= led-core.o
 obj-$(CONFIG_LEDS_CLASS)		+= led-class.o
 obj-$(CONFIG_LEDS_CLASS_FLASH)		+= led-class-flash.o
+obj-$(CONFIG_LEDS_CLASS_MULTI_COLOR)	+= led-class-multicolor.o
 obj-$(CONFIG_LEDS_TRIGGERS)		+= led-triggers.o
 
 # LED Platform Drivers
diff --git a/drivers/leds/led-class-multicolor.c b/drivers/leds/led-class-multicolor.c
new file mode 100644
index 000000000000..25371bd9a860
--- /dev/null
+++ b/drivers/leds/led-class-multicolor.c
@@ -0,0 +1,220 @@
+// SPDX-License-Identifier: GPL-2.0
+// LED Multi Color class interface
+// Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/
+
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/led-class-multicolor.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/uaccess.h>
+
+#include "leds.h"
+
+#define INTENSITY_NAME		"_intensity"
+#define MAX_INTENSITY_NAME	"_max_intensity"
+
+void led_mc_calc_brightness(struct led_classdev_mc *mcled_cdev,
+			    enum led_brightness brightness,
+			    int brightness_val[])
+{
+	struct led_mc_color_entry *priv;
+	int i = 0;
+
+	list_for_each_entry(priv, &mcled_cdev->color_list, list) {
+		brightness_val[i] = brightness *
+				    priv->intensity / priv->max_intensity;
+		i++;
+	}
+}
+EXPORT_SYMBOL_GPL(led_mc_calc_brightness);
+
+static ssize_t intensity_store(struct device *dev,
+				struct device_attribute *intensity_attr,
+				const char *buf, size_t size)
+{
+	struct led_mc_color_entry *priv = container_of(intensity_attr,
+						    struct led_mc_color_entry,
+						      intensity_attr);
+	struct led_classdev *led_cdev = priv->mcled_cdev->led_cdev;
+	unsigned long value;
+	ssize_t ret;
+
+	mutex_lock(&led_cdev->led_access);
+
+	ret = kstrtoul(buf, 10, &value);
+	if (ret)
+		goto unlock;
+
+	if (value > priv->max_intensity) {
+		ret = -EINVAL;
+		goto unlock;
+	}
+
+	priv->intensity = value;
+	ret = size;
+
+unlock:
+	mutex_unlock(&led_cdev->led_access);
+	return ret;
+}
+
+static ssize_t intensity_show(struct device *dev,
+			      struct device_attribute *intensity_attr,
+			      char *buf)
+{
+	struct led_mc_color_entry *priv = container_of(intensity_attr,
+						    struct led_mc_color_entry,
+						      intensity_attr);
+
+	return sprintf(buf, "%d\n", priv->intensity);
+}
+
+static ssize_t max_intensity_show(struct device *dev,
+				   struct device_attribute *max_intensity_attr,
+				   char *buf)
+{
+	struct led_mc_color_entry *priv = container_of(max_intensity_attr,
+						    struct led_mc_color_entry,
+						      max_intensity_attr);
+
+	return sprintf(buf, "%d\n", priv->max_intensity);
+}
+
+static struct attribute *led_color_attrs[] = {
+	NULL,
+};
+
+static struct attribute_group led_color_group = {
+	.name = "colors",
+	.attrs = led_color_attrs,
+};
+
+static int led_multicolor_init_color(struct led_classdev_mc *mcled_cdev,
+				     int color_id, int color_index)
+{
+	struct led_classdev *led_cdev = mcled_cdev->led_cdev;
+	struct led_mc_color_entry *mc_priv;
+	char *intensity_file_name;
+	char *max_intensity_file_name;
+	size_t len;
+	int ret;
+
+	mc_priv = devm_kzalloc(led_cdev->dev, sizeof(*mc_priv), GFP_KERNEL);
+	if (!mc_priv)
+		return -ENOMEM;
+
+	mc_priv->led_color_id = color_id;
+	mc_priv->mcled_cdev = mcled_cdev;
+
+	sysfs_attr_init(&mc_priv->intensity_attr.attr);
+	len = strlen(led_colors[color_id]) + strlen(INTENSITY_NAME) + 1;
+	intensity_file_name = kzalloc(len, GFP_KERNEL);
+	if (!intensity_file_name)
+		return -ENOMEM;
+
+	snprintf(intensity_file_name, len, "%s%s",
+		 led_colors[color_id], INTENSITY_NAME);
+	mc_priv->intensity_attr.attr.name = intensity_file_name;
+	mc_priv->intensity_attr.attr.mode = 644;
+	mc_priv->intensity_attr.store = intensity_store;
+	mc_priv->intensity_attr.show = intensity_show;
+	ret = sysfs_add_file_to_group(&led_cdev->dev->kobj,
+				      &mc_priv->intensity_attr.attr,
+				      led_color_group.name);
+	if (ret)
+		goto intensity_err_out;
+
+	sysfs_attr_init(&mc_priv->max_intensity_attr.attr);
+	len = strlen(led_colors[color_id]) + strlen(MAX_INTENSITY_NAME) + 1;
+	max_intensity_file_name = kzalloc(len, GFP_KERNEL);
+	if (!max_intensity_file_name) {
+		ret = -ENOMEM;
+		goto intensity_err_out;
+	}
+
+	snprintf(max_intensity_file_name, len, "%s%s",
+		 led_colors[color_id], MAX_INTENSITY_NAME);
+	mc_priv->max_intensity_attr.attr.name = max_intensity_file_name;
+	mc_priv->max_intensity_attr.attr.mode = 444;
+	mc_priv->max_intensity_attr.show = max_intensity_show;
+	ret = sysfs_add_file_to_group(&led_cdev->dev->kobj,
+				      &mc_priv->max_intensity_attr.attr,
+				      led_color_group.name);
+	if (ret)
+		goto max_intensity_err_out;
+
+	mc_priv->max_intensity = LED_FULL;
+	list_add_tail(&mc_priv->list, &mcled_cdev->color_list);
+
+max_intensity_err_out:
+	kfree(max_intensity_file_name);
+intensity_err_out:
+	kfree(intensity_file_name);
+	return ret;
+}
+
+static int led_multicolor_init_color_dir(struct led_classdev_mc *mcled_cdev)
+{
+	struct led_classdev *led_cdev = mcled_cdev->led_cdev;
+	int ret;
+	int i, color_index = 0;
+
+	ret = sysfs_create_group(&led_cdev->dev->kobj, &led_color_group);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < LED_COLOR_ID_MAX; i++) {
+		if (test_bit(i, &mcled_cdev->available_colors)) {
+			ret = led_multicolor_init_color(mcled_cdev, i,
+							color_index);
+			if (ret)
+				break;
+
+			color_index++;
+		}
+	}
+
+	return ret;
+}
+
+int led_classdev_multicolor_register_ext(struct device *parent,
+				     struct led_classdev_mc *mcled_cdev,
+				     struct led_init_data *init_data)
+{
+	struct led_classdev *led_cdev;
+	int ret;
+
+	if (!mcled_cdev)
+		return -EINVAL;
+
+	led_cdev = mcled_cdev->led_cdev;
+	INIT_LIST_HEAD(&mcled_cdev->color_list);
+
+	/* Register led class device */
+	ret = led_classdev_register_ext(parent, led_cdev, init_data);
+	if (ret)
+		return ret;
+
+	return led_multicolor_init_color_dir(mcled_cdev);
+}
+EXPORT_SYMBOL_GPL(led_classdev_multicolor_register_ext);
+
+void led_classdev_multicolor_unregister(struct led_classdev_mc *mcled_cdev)
+{
+	struct led_mc_color_entry *priv, *next;
+
+	if (!mcled_cdev)
+		return;
+
+	list_for_each_entry_safe(priv, next, &mcled_cdev->color_list, list)
+		list_del(&priv->list);
+
+	sysfs_remove_group(&mcled_cdev->led_cdev->dev->kobj, &led_color_group);
+	led_classdev_unregister(mcled_cdev->led_cdev);
+}
+EXPORT_SYMBOL_GPL(led_classdev_multicolor_unregister);
+
+MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com>");
+MODULE_DESCRIPTION("Multi Color LED class interface");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/led-class-multicolor.h b/include/linux/led-class-multicolor.h
new file mode 100644
index 000000000000..280ba5a614b4
--- /dev/null
+++ b/include/linux/led-class-multicolor.h
@@ -0,0 +1,74 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* LED Multicolor class interface
+ * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+#ifndef __LINUX_MULTICOLOR_LEDS_H_INCLUDED
+#define __LINUX_MULTICOLOR_LEDS_H_INCLUDED
+
+#include <linux/leds.h>
+#include <dt-bindings/leds/common.h>
+
+struct led_classdev_mc;
+
+struct led_mc_color_entry {
+	struct led_classdev_mc *mcled_cdev;
+
+	struct device_attribute max_intensity_attr;
+	struct device_attribute intensity_attr;
+
+	enum led_brightness max_intensity;
+	enum led_brightness intensity;
+
+	struct list_head list;
+
+	int led_color_id;
+};
+
+struct led_classdev_mc {
+	/* led class device */
+	struct led_classdev *led_cdev;
+	struct list_head color_list;
+
+	unsigned long available_colors;
+	int num_leds;
+};
+
+static inline struct led_classdev_mc *lcdev_to_mccdev(
+						struct led_classdev *lcdev)
+{
+	return container_of(lcdev, struct led_classdev_mc, led_cdev);
+}
+
+/**
+ * led_classdev_multicolor_register_ext - register a new object of led_classdev
+ *				      class with support for multicolor LEDs
+ * @parent: the multicolor LED to register
+ * @mcled_cdev: the led_classdev_mc structure for this device
+ * @init_data: the LED class Multi color device initialization data
+ *
+ * Returns: 0 on success or negative error value on failure
+ */
+int led_classdev_multicolor_register_ext(struct device *parent,
+					    struct led_classdev_mc *mcled_cdev,
+					    struct led_init_data *init_data);
+
+#define led_classdev_multicolor_register(parent, mcled_cdev)		\
+	led_classdev_multicolor_register_ext(parent, mcled_cdev, NULL)
+
+/**
+ * led_classdev_multicolor_unregister - unregisters an object of led_classdev
+ *					class with support for multicolor LEDs
+ * @mcled_cdev: the multicolor LED to unregister
+ *
+ * Unregister a previously registered via led_classdev_multicolor_register
+ * object
+ */
+void led_classdev_multicolor_unregister(struct led_classdev_mc *mcled_cdev);
+
+/* Calculate brightness for the monochrome LED cluster */
+void led_mc_calc_brightness(struct led_classdev_mc *mcled_cdev,
+			    enum led_brightness brightness,
+			    int brightness_val[]);
+
+#endif	/* __LINUX_MULTICOLOR_LEDS_H_INCLUDED */
-- 
2.22.0.214.g8dca754b1e


^ permalink raw reply	[flat|nested] 38+ messages in thread

* [PATCH v9 06/15] dt: bindings: lp50xx: Introduce the lp50xx family of RGB drivers
  2019-09-25 17:46 [PATCH v9 00/15] Multicolor Framework Dan Murphy
                   ` (4 preceding siblings ...)
  2019-09-25 17:46 ` [PATCH v9 05/15] leds: multicolor: Introduce a multicolor class definition Dan Murphy
@ 2019-09-25 17:46 ` Dan Murphy
  2019-09-25 17:46 ` [PATCH v9 07/15] leds: lp50xx: Add the LP50XX family of the RGB LED driver Dan Murphy
                   ` (8 subsequent siblings)
  14 siblings, 0 replies; 38+ messages in thread
From: Dan Murphy @ 2019-09-25 17:46 UTC (permalink / raw)
  To: jacek.anaszewski, pavel; +Cc: linux-leds, linux-kernel, Dan Murphy

Introduce the bindings for the Texas Instruments LP5036, LP5030, LP5024,
LP5018, LP5012 and LP5009 RGB LED device driver.  The LP5036/30/24/18/12/9
can control RGB LEDs individually or as part of a control bank group.
These devices have the ability to adjust the mixing control for the RGB
LEDs to obtain different colors independent of the overall brightness of
the LED grouping.

Datasheet:
http://www.ti.com/lit/ds/symlink/lp5012.pdf
http://www.ti.com/lit/ds/symlink/lp5024.pdf
http://www.ti.com/lit/ds/symlink/lp5036.pdf

Signed-off-by: Dan Murphy <dmurphy@ti.com>
---
 .../devicetree/bindings/leds/leds-lp50xx.txt  | 148 ++++++++++++++++++
 1 file changed, 148 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/leds/leds-lp50xx.txt

diff --git a/Documentation/devicetree/bindings/leds/leds-lp50xx.txt b/Documentation/devicetree/bindings/leds/leds-lp50xx.txt
new file mode 100644
index 000000000000..8a0a21f1056c
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-lp50xx.txt
@@ -0,0 +1,148 @@
+* Texas Instruments - LP5009/12/18/24/30/36 RGB LED driver
+
+The LP50XX is multi-channel, I2C RGB LED Drivers that can group RGB LEDs into
+a LED group or control them individually.
+
+The difference in these RGB LED drivers is the number of supported RGB modules.
+
+Required parent properties:
+	- compatible:
+		"ti,lp5009"
+		"ti,lp5012"
+		"ti,lp5018"
+		"ti,lp5024"
+		"ti,lp5030"
+		"ti,lp5036"
+	- reg :  I2C slave address
+		lp5009/12 - 0x14, 0x15, 0x16, 0x17
+		lp5018/24 - 0x28, 0x29, 0x2a, 0x2b
+		lp5030/36 - 0x30, 0x31, 0x32, 0x33
+	- #address-cells : 1
+	- #size-cells : 0
+
+Optional parent properties:
+	- enable-gpios : gpio pin to enable/disable the device.
+	- vled-supply : LED supply
+
+Required child properties:
+	- #address-cells : 1
+	- #size-cells : 0
+	- reg : This is the LED module number.
+	- color : Must be LED_COLOR_ID_MULTI
+	- function : see Documentation/devicetree/bindings/leds/common.txt
+
+Required child properties only is LED modules will be banked:
+	- ti,led-bank : This property denotes the LED module numbers that will
+			be controlled as a single RGB cluster.  Each LED module
+			number will be controlled by a single LED class instance.
+			There can only be one instance of the ti,led-bank
+			property for each device node.
+
+Required grandchildren properties:
+	- reg : A single entry denoting the LED output that controls
+		the monochrome LED.
+	- color : see Documentation/devicetree/bindings/leds/common.txt
+	- led-sources : see Documentation/devicetree/bindings/leds/common.txt
+
+The LED outputs associated with the LED modules are defined in Table 1 of the
+corresponding data sheets.
+
+LP5009 - 3 Total RGB cluster LED outputs 0-2
+LP5012 - 4 Total RGB cluster LED outputs 0-3
+LP5018 - 6 Total RGB cluster LED outputs 0-5
+LP5024 - 8 Total RGB cluster LED outputs 0-7
+LP5030 - 10 Total RGB cluster LED outputs 0-9
+LP5036 - 12 Total RGB cluster LED outputs 0-11
+
+Optional child properties:
+	- label : see Documentation/devicetree/bindings/leds/common.txt
+	- linux,default-trigger :
+	   see Documentation/devicetree/bindings/leds/common.txt
+
+Examples:
+led-controller@29 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	compatible = "ti,lp5024";
+	reg = <0x29>;
+	enable-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+	vled-supply = <&vmmcsd_fixed>;
+
+	multi-led@1 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <1>;
+		color = <LED_COLOR_ID_MULTI>;
+		function = LED_FUNCTION_STATUS;
+
+		led@3 {
+			reg = <3>;
+			color = <LED_COLOR_ID_RED>;
+		};
+
+		led@4 {
+			reg = <4>;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+
+		led@5 {
+			reg = <5>;
+			color = <LED_COLOR_ID_BLUE>;
+		};
+	};
+
+	multi-led@2 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <2>;
+		color = <LED_COLOR_ID_MULTI>;
+		function = LED_FUNCTION_STANDBY;
+		ti,led-bank = <2 3 5>;
+
+		led@6 {
+			reg = <0x6>;
+			color = <LED_COLOR_ID_RED>;
+			led-sources = <6 9 15>;
+		};
+
+		led@7 {
+			reg = <0x7>;
+			color = <LED_COLOR_ID_GREEN>;
+			led-sources = <7 10 16>;
+		};
+
+		led@8 {
+			reg = <0x8>;
+			color = <LED_COLOR_ID_BLUE>;
+			led-sources = <8 11 17>;
+		};
+	};
+
+	multi-led@4 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <4>;
+		color = <LED_COLOR_ID_MULTI>;
+		function = LED_FUNCTION_ACTIVITY;
+
+		led@12 {
+			reg = <12>;
+			color = <LED_COLOR_ID_RED>;
+		};
+
+		led@13 {
+			reg = <13>;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+
+		led@14 {
+			reg = <14>;
+			color = <LED_COLOR_ID_BLUE>;
+		};
+	};
+};
+
+For more product information please see the link below:
+http://www.ti.com/lit/ds/symlink/lp5012.pdf
+http://www.ti.com/lit/ds/symlink/lp5024.pdf
+http://www.ti.com/lit/ds/symlink/lp5036.pdf
-- 
2.22.0.214.g8dca754b1e


^ permalink raw reply	[flat|nested] 38+ messages in thread

* [PATCH v9 07/15] leds: lp50xx: Add the LP50XX family of the RGB LED driver
  2019-09-25 17:46 [PATCH v9 00/15] Multicolor Framework Dan Murphy
                   ` (5 preceding siblings ...)
  2019-09-25 17:46 ` [PATCH v9 06/15] dt: bindings: lp50xx: Introduce the lp50xx family of RGB drivers Dan Murphy
@ 2019-09-25 17:46 ` Dan Murphy
  2019-09-25 21:27   ` Jacek Anaszewski
  2019-09-25 17:46 ` [PATCH v9 08/15] dt: bindings: lp55xx: Be consistent in the document with LED Dan Murphy
                   ` (7 subsequent siblings)
  14 siblings, 1 reply; 38+ messages in thread
From: Dan Murphy @ 2019-09-25 17:46 UTC (permalink / raw)
  To: jacek.anaszewski, pavel; +Cc: linux-leds, linux-kernel, Dan Murphy

Introduce the LP5036/30/24/18/12/9 RGB LED driver.
The difference in these parts are the number of
LED outputs where the:

LP5036 can control 36 LEDs
LP5030 can control 30 LEDs
LP5024 can control 24 LEDs
LP5018 can control 18 LEDs
LP5012 can control 12 LEDs
LP5009 can control 9 LEDs

The device has the ability to group LED output into control banks
so that multiple LED banks can be controlled with the same mixing and
brightness.  Inversely the LEDs can also be controlled independently.

Signed-off-by: Dan Murphy <dmurphy@ti.com>
---
 drivers/leds/Kconfig       |  11 +
 drivers/leds/Makefile      |   1 +
 drivers/leds/leds-lp50xx.c | 767 +++++++++++++++++++++++++++++++++++++
 3 files changed, 779 insertions(+)
 create mode 100644 drivers/leds/leds-lp50xx.c

diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index cfb1ebb6517f..84f60e35c5ee 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -363,6 +363,17 @@ config LEDS_LP3952
 	  To compile this driver as a module, choose M here: the
 	  module will be called leds-lp3952.
 
+config LEDS_LP50XX
+	tristate "LED Support for TI LP5036/30/24/18/12/9 LED driver chip"
+	depends on LEDS_CLASS && REGMAP_I2C
+	depends on LEDS_CLASS_MULTI_COLOR
+	help
+	  If you say yes here you get support for the Texas Instruments
+	  LP5036, LP5030, LP5024, LP5018, LP5012 and LP5009 LED driver.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called leds-lp50xx.
+
 config LEDS_LP55XX_COMMON
 	tristate "Common Driver for TI/National LP5521/5523/55231/5562/8501"
 	depends on LEDS_LP5521 || LEDS_LP5523 || LEDS_LP5562 || LEDS_LP8501
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index 841038cfe35b..7a208a0f7b84 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -34,6 +34,7 @@ obj-$(CONFIG_LEDS_GPIO_REGISTER)	+= leds-gpio-register.o
 obj-$(CONFIG_LEDS_GPIO)			+= leds-gpio.o
 obj-$(CONFIG_LEDS_LP3944)		+= leds-lp3944.o
 obj-$(CONFIG_LEDS_LP3952)		+= leds-lp3952.o
+obj-$(CONFIG_LEDS_LP50XX)		+= leds-lp50xx.o
 obj-$(CONFIG_LEDS_LP55XX_COMMON)	+= leds-lp55xx-common.o
 obj-$(CONFIG_LEDS_LP5521)		+= leds-lp5521.o
 obj-$(CONFIG_LEDS_LP5523)		+= leds-lp5523.o
diff --git a/drivers/leds/leds-lp50xx.c b/drivers/leds/leds-lp50xx.c
new file mode 100644
index 000000000000..a4654cc2bea5
--- /dev/null
+++ b/drivers/leds/leds-lp50xx.c
@@ -0,0 +1,767 @@
+// SPDX-License-Identifier: GPL-2.0
+// TI LP50XX LED chip family driver
+// Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
+
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/leds.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+#include <uapi/linux/uleds.h>
+
+#include <linux/led-class-multicolor.h>
+
+#define LP50XX_DEV_CFG0		0x00
+#define LP50XX_DEV_CFG1		0x01
+#define LP50XX_LED_CFG0		0x02
+
+/* LP5009 and LP5012 registers */
+#define LP5012_BNK_BRT		0x03
+#define LP5012_BNKA_CLR		0x04
+#define LP5012_BNKB_CLR		0x05
+#define LP5012_BNKC_CLR		0x06
+#define LP5012_LED0_BRT		0x07
+#define LP5012_LED1_BRT		0x08
+#define LP5012_LED2_BRT		0x09
+#define LP5012_LED3_BRT		0x0a
+#define LP5012_OUT0_CLR		0x0b
+#define LP5012_OUT1_CLR		0x0c
+#define LP5012_OUT2_CLR		0x0d
+#define LP5012_OUT3_CLR		0x0e
+#define LP5012_OUT4_CLR		0x0f
+#define LP5012_OUT5_CLR		0x10
+#define LP5012_OUT6_CLR		0x11
+#define LP5012_OUT7_CLR		0x12
+#define LP5012_OUT8_CLR		0x13
+#define LP5012_OUT9_CLR		0x14
+#define LP5012_OUT10_CLR	0x15
+#define LP5012_OUT11_CLR	0x16
+#define LP5012_RESET		0x17
+
+/* LP5018 and LP5024 registers */
+#define LP5024_BNK_BRT		0x03
+#define LP5024_BNKA_CLR		0x04
+#define LP5024_BNKB_CLR		0x05
+#define LP5024_BNKC_CLR		0x06
+#define LP5024_LED0_BRT		0x07
+#define LP5024_LED1_BRT		0x08
+#define LP5024_LED2_BRT		0x09
+#define LP5024_LED3_BRT		0x0a
+#define LP5024_LED4_BRT		0x0b
+#define LP5024_LED5_BRT		0x0c
+#define LP5024_LED6_BRT		0x0d
+#define LP5024_LED7_BRT		0x0e
+
+#define LP5024_OUT0_CLR		0x0f
+#define LP5024_OUT1_CLR		0x10
+#define LP5024_OUT2_CLR		0x11
+#define LP5024_OUT3_CLR		0x12
+#define LP5024_OUT4_CLR		0x13
+#define LP5024_OUT5_CLR		0x14
+#define LP5024_OUT6_CLR		0x15
+#define LP5024_OUT7_CLR		0x16
+#define LP5024_OUT8_CLR		0x17
+#define LP5024_OUT9_CLR		0x18
+#define LP5024_OUT10_CLR	0x19
+#define LP5024_OUT11_CLR	0x1a
+#define LP5024_OUT12_CLR	0x1b
+#define LP5024_OUT13_CLR	0x1c
+#define LP5024_OUT14_CLR	0x1d
+#define LP5024_OUT15_CLR	0x1e
+#define LP5024_OUT16_CLR	0x1f
+#define LP5024_OUT17_CLR	0x20
+#define LP5024_OUT18_CLR	0x21
+#define LP5024_OUT19_CLR	0x22
+#define LP5024_OUT20_CLR	0x23
+#define LP5024_OUT21_CLR	0x24
+#define LP5024_OUT22_CLR	0x25
+#define LP5024_OUT23_CLR	0x26
+#define LP5024_RESET		0x27
+
+/* LP5030 and LP5036 registers */
+#define LP5036_LED_CFG1		0x03
+#define LP5036_BNK_BRT		0x04
+#define LP5036_BNKA_CLR		0x05
+#define LP5036_BNKB_CLR		0x06
+#define LP5036_BNKC_CLR		0x07
+#define LP5036_LED0_BRT		0x08
+#define LP5036_LED1_BRT		0x09
+#define LP5036_LED2_BRT		0x0a
+#define LP5036_LED3_BRT		0x0b
+#define LP5036_LED4_BRT		0x0c
+#define LP5036_LED5_BRT		0x0d
+#define LP5036_LED6_BRT		0x0e
+#define LP5036_LED7_BRT		0x0f
+#define LP5036_LED8_BRT		0x10
+#define LP5036_LED9_BRT		0x11
+#define LP5036_LED10_BRT	0x12
+#define LP5036_LED11_BRT	0x13
+
+#define LP5036_OUT0_CLR		0x14
+#define LP5036_OUT1_CLR		0x15
+#define LP5036_OUT2_CLR		0x16
+#define LP5036_OUT3_CLR		0x17
+#define LP5036_OUT4_CLR		0x18
+#define LP5036_OUT5_CLR		0x19
+#define LP5036_OUT6_CLR		0x1a
+#define LP5036_OUT7_CLR		0x1b
+#define LP5036_OUT8_CLR		0x1c
+#define LP5036_OUT9_CLR		0x1d
+#define LP5036_OUT10_CLR	0x1e
+#define LP5036_OUT11_CLR	0x1f
+#define LP5036_OUT12_CLR	0x20
+#define LP5036_OUT13_CLR	0x21
+#define LP5036_OUT14_CLR	0x22
+#define LP5036_OUT15_CLR	0x23
+#define LP5036_OUT16_CLR	0x24
+#define LP5036_OUT17_CLR	0x25
+#define LP5036_OUT18_CLR	0x26
+#define LP5036_OUT19_CLR	0x27
+#define LP5036_OUT20_CLR	0x28
+#define LP5036_OUT21_CLR	0x29
+#define LP5036_OUT22_CLR	0x2a
+#define LP5036_OUT23_CLR	0x2b
+#define LP5036_OUT24_CLR	0x2c
+#define LP5036_OUT25_CLR	0x2d
+#define LP5036_OUT26_CLR	0x2e
+#define LP5036_OUT27_CLR	0x2f
+#define LP5036_OUT28_CLR	0x30
+#define LP5036_OUT29_CLR	0x31
+#define LP5036_OUT30_CLR	0x32
+#define LP5036_OUT31_CLR	0x33
+#define LP5036_OUT32_CLR	0x34
+#define LP5036_OUT33_CLR	0x35
+#define LP5036_OUT34_CLR	0x36
+#define LP5036_OUT35_CLR	0x37
+#define LP5036_RESET		0x38
+
+#define LP50XX_SW_RESET		0xff
+#define LP50XX_CHIP_EN		BIT(6)
+
+/* There are 3 LED outputs per bank */
+#define LP50XX_LEDS_PER_MODULE	3
+
+#define LP5009_MAX_LED_MODULES	2
+#define LP5012_MAX_LED_MODULES	4
+#define LP5018_MAX_LED_MODULES	6
+#define LP5024_MAX_LED_MODULES	8
+#define LP5030_MAX_LED_MODULES	10
+#define LP5036_MAX_LED_MODULES	12
+
+#define LP5009_MAX_LEDS	(LP5009_MAX_LED_MODULES * LP50XX_LEDS_PER_MODULE)
+#define LP5012_MAX_LEDS	(LP5012_MAX_LED_MODULES * LP50XX_LEDS_PER_MODULE)
+#define LP5018_MAX_LEDS	(LP5018_MAX_LED_MODULES * LP50XX_LEDS_PER_MODULE)
+#define LP5024_MAX_LEDS	(LP5024_MAX_LED_MODULES * LP50XX_LEDS_PER_MODULE)
+#define LP5030_MAX_LEDS	(LP5030_MAX_LED_MODULES * LP50XX_LEDS_PER_MODULE)
+#define LP5036_MAX_LEDS	(LP5036_MAX_LED_MODULES * LP50XX_LEDS_PER_MODULE)
+
+struct lp50xx_led {
+	struct led_classdev led_dev;
+	struct led_classdev_mc mc_cdev;
+	struct lp50xx *priv;
+	unsigned long bank_modules;
+	int led_intensity[LP50XX_LEDS_PER_MODULE];
+	u8 ctrl_bank_enabled;
+	int led_number;
+};
+
+/**
+ * struct lp50xx -
+ * @enable_gpio: hardware enable gpio
+ * @regulator: LED supply regulator pointer
+ * @client: pointer to the I2C client
+ * @regmap: device register map
+ * @dev: pointer to the devices device struct
+ * @lock: lock for reading/writing the device
+ * @chip_info: chip specific information (ie num_leds)
+ * @num_of_banked_leds: holds the number of banked LEDs
+ * @leds: array of LED strings
+ */
+struct lp50xx {
+	struct gpio_desc *enable_gpio;
+	struct regulator *regulator;
+	struct i2c_client *client;
+	struct regmap *regmap;
+	struct device *dev;
+	struct mutex lock;
+	const struct lp50xx_chip_info *chip_info;
+	int num_of_banked_leds;
+
+	/* This needs to be at the end of the struct */
+	struct lp50xx_led leds[];
+};
+
+static const struct reg_default lp5012_reg_defs[] = {
+	{LP50XX_DEV_CFG0, 0x0},
+	{LP50XX_DEV_CFG1, 0x3c},
+	{LP50XX_LED_CFG0, 0x0},
+	{LP5012_BNK_BRT, 0xff},
+	{LP5012_BNKA_CLR, 0x0f},
+	{LP5012_BNKB_CLR, 0x0f},
+	{LP5012_BNKC_CLR, 0x0f},
+	{LP5012_LED0_BRT, 0x0f},
+	{LP5012_LED1_BRT, 0xff},
+	{LP5012_LED2_BRT, 0xff},
+	{LP5012_LED3_BRT, 0xff},
+	{LP5012_OUT0_CLR, 0x0f},
+	{LP5012_OUT1_CLR, 0x00},
+	{LP5012_OUT2_CLR, 0x00},
+	{LP5012_OUT3_CLR, 0x00},
+	{LP5012_OUT4_CLR, 0x00},
+	{LP5012_OUT5_CLR, 0x00},
+	{LP5012_OUT6_CLR, 0x00},
+	{LP5012_OUT7_CLR, 0x00},
+	{LP5012_OUT8_CLR, 0x00},
+	{LP5012_OUT9_CLR, 0x00},
+	{LP5012_OUT10_CLR, 0x00},
+	{LP5012_OUT11_CLR, 0x00},
+	{LP5012_RESET, 0x00}
+};
+
+static const struct reg_default lp5024_reg_defs[] = {
+	{LP50XX_DEV_CFG0, 0x0},
+	{LP50XX_DEV_CFG1, 0x3c},
+	{LP50XX_LED_CFG0, 0x0},
+	{LP5024_BNK_BRT, 0xff},
+	{LP5024_BNKA_CLR, 0x0f},
+	{LP5024_BNKB_CLR, 0x0f},
+	{LP5024_BNKC_CLR, 0x0f},
+	{LP5024_LED0_BRT, 0x0f},
+	{LP5024_LED1_BRT, 0xff},
+	{LP5024_LED2_BRT, 0xff},
+	{LP5024_LED3_BRT, 0xff},
+	{LP5024_LED4_BRT, 0xff},
+	{LP5024_LED5_BRT, 0xff},
+	{LP5024_LED6_BRT, 0xff},
+	{LP5024_LED7_BRT, 0xff},
+	{LP5024_OUT0_CLR, 0x0f},
+	{LP5024_OUT1_CLR, 0x00},
+	{LP5024_OUT2_CLR, 0x00},
+	{LP5024_OUT3_CLR, 0x00},
+	{LP5024_OUT4_CLR, 0x00},
+	{LP5024_OUT5_CLR, 0x00},
+	{LP5024_OUT6_CLR, 0x00},
+	{LP5024_OUT7_CLR, 0x00},
+	{LP5024_OUT8_CLR, 0x00},
+	{LP5024_OUT9_CLR, 0x00},
+	{LP5024_OUT10_CLR, 0x00},
+	{LP5024_OUT11_CLR, 0x00},
+	{LP5024_OUT12_CLR, 0x00},
+	{LP5024_OUT13_CLR, 0x00},
+	{LP5024_OUT14_CLR, 0x00},
+	{LP5024_OUT15_CLR, 0x00},
+	{LP5024_OUT16_CLR, 0x00},
+	{LP5024_OUT17_CLR, 0x00},
+	{LP5024_OUT18_CLR, 0x00},
+	{LP5024_OUT19_CLR, 0x00},
+	{LP5024_OUT20_CLR, 0x00},
+	{LP5024_OUT21_CLR, 0x00},
+	{LP5024_OUT22_CLR, 0x00},
+	{LP5024_OUT23_CLR, 0x00},
+	{LP5024_RESET, 0x00}
+};
+
+static const struct reg_default lp5036_reg_defs[] = {
+	{LP50XX_DEV_CFG0, 0x0},
+	{LP50XX_DEV_CFG1, 0x3c},
+	{LP50XX_LED_CFG0, 0x0},
+	{LP5036_LED_CFG1, 0x0},
+	{LP5036_BNK_BRT, 0xff},
+	{LP5036_BNKA_CLR, 0x0f},
+	{LP5036_BNKB_CLR, 0x0f},
+	{LP5036_BNKC_CLR, 0x0f},
+	{LP5036_LED0_BRT, 0x0f},
+	{LP5036_LED1_BRT, 0xff},
+	{LP5036_LED2_BRT, 0xff},
+	{LP5036_LED3_BRT, 0xff},
+	{LP5036_LED4_BRT, 0xff},
+	{LP5036_LED5_BRT, 0xff},
+	{LP5036_LED6_BRT, 0xff},
+	{LP5036_LED7_BRT, 0xff},
+	{LP5036_OUT0_CLR, 0x0f},
+	{LP5036_OUT1_CLR, 0x00},
+	{LP5036_OUT2_CLR, 0x00},
+	{LP5036_OUT3_CLR, 0x00},
+	{LP5036_OUT4_CLR, 0x00},
+	{LP5036_OUT5_CLR, 0x00},
+	{LP5036_OUT6_CLR, 0x00},
+	{LP5036_OUT7_CLR, 0x00},
+	{LP5036_OUT8_CLR, 0x00},
+	{LP5036_OUT9_CLR, 0x00},
+	{LP5036_OUT10_CLR, 0x00},
+	{LP5036_OUT11_CLR, 0x00},
+	{LP5036_OUT12_CLR, 0x00},
+	{LP5036_OUT13_CLR, 0x00},
+	{LP5036_OUT14_CLR, 0x00},
+	{LP5036_OUT15_CLR, 0x00},
+	{LP5036_OUT16_CLR, 0x00},
+	{LP5036_OUT17_CLR, 0x00},
+	{LP5036_OUT18_CLR, 0x00},
+	{LP5036_OUT19_CLR, 0x00},
+	{LP5036_OUT20_CLR, 0x00},
+	{LP5036_OUT21_CLR, 0x00},
+	{LP5036_OUT22_CLR, 0x00},
+	{LP5036_OUT23_CLR, 0x00},
+	{LP5036_OUT24_CLR, 0x00},
+	{LP5036_OUT25_CLR, 0x00},
+	{LP5036_OUT26_CLR, 0x00},
+	{LP5036_OUT27_CLR, 0x00},
+	{LP5036_OUT28_CLR, 0x00},
+	{LP5036_OUT29_CLR, 0x00},
+	{LP5036_OUT30_CLR, 0x00},
+	{LP5036_OUT31_CLR, 0x00},
+	{LP5036_OUT32_CLR, 0x00},
+	{LP5036_OUT33_CLR, 0x00},
+	{LP5036_OUT34_CLR, 0x00},
+	{LP5036_OUT35_CLR, 0x00},
+	{LP5036_RESET, 0x00}
+};
+
+static const struct regmap_config lp5012_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.max_register = LP5012_RESET,
+	.reg_defaults = lp5012_reg_defs,
+	.num_reg_defaults = ARRAY_SIZE(lp5012_reg_defs),
+	.cache_type = REGCACHE_RBTREE,
+};
+
+static const struct regmap_config lp5024_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.max_register = LP5024_RESET,
+	.reg_defaults = lp5024_reg_defs,
+	.num_reg_defaults = ARRAY_SIZE(lp5024_reg_defs),
+	.cache_type = REGCACHE_RBTREE,
+};
+
+static const struct regmap_config lp5036_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.max_register = LP5036_RESET,
+	.reg_defaults = lp5036_reg_defs,
+	.num_reg_defaults = ARRAY_SIZE(lp5036_reg_defs),
+	.cache_type = REGCACHE_RBTREE,
+};
+
+enum lp50xx_model {
+	LP5009,
+	LP5012,
+	LP5018,
+	LP5024,
+	LP5030,
+	LP5036,
+};
+
+/*
+ * struct lp50xx_chip_info -
+ * @num_leds: number of LED outputs available on the device
+ * @led_brightness0_reg: first brightness register of the device
+ * @mix_out0_reg: first color mix register of the device
+ * @bank_brt_reg: bank brightness register
+ * @bank_mix_reg: color mix register
+ * @reset_reg: device reset register
+ */
+struct lp50xx_chip_info {
+	struct regmap_config lp50xx_regmap_config;
+	u8 num_leds;
+	u8 led_brightness0_reg;
+	u8 mix_out0_reg;
+	u8 bank_brt_reg;
+	u8 bank_mix_reg;
+	u8 reset_reg;
+};
+
+static const struct lp50xx_chip_info lp50xx_chip_info_tbl[] = {
+	[LP5009] = {
+		.num_leds = LP5009_MAX_LEDS,
+		.led_brightness0_reg = LP5012_LED0_BRT,
+		.mix_out0_reg = LP5012_OUT0_CLR,
+		.bank_brt_reg = LP5012_BNK_BRT,
+		.bank_mix_reg = LP5012_BNKA_CLR,
+		.reset_reg = LP5012_RESET,
+		.lp50xx_regmap_config = lp5012_regmap_config,
+	},
+	[LP5012] = {
+		.num_leds = LP5012_MAX_LEDS,
+		.led_brightness0_reg = LP5012_LED0_BRT,
+		.mix_out0_reg = LP5012_OUT0_CLR,
+		.bank_brt_reg = LP5012_BNK_BRT,
+		.bank_mix_reg = LP5012_BNKA_CLR,
+		.reset_reg = LP5012_RESET,
+		.lp50xx_regmap_config = lp5012_regmap_config,
+	},
+	[LP5018] = {
+		.num_leds = LP5018_MAX_LEDS,
+		.led_brightness0_reg = LP5024_LED0_BRT,
+		.mix_out0_reg = LP5024_OUT0_CLR,
+		.bank_brt_reg = LP5024_BNK_BRT,
+		.bank_mix_reg = LP5024_BNKA_CLR,
+		.reset_reg = LP5024_RESET,
+		.lp50xx_regmap_config = lp5024_regmap_config,
+	},
+	[LP5024] = {
+		.num_leds = LP5024_MAX_LEDS,
+		.led_brightness0_reg = LP5024_LED0_BRT,
+		.mix_out0_reg = LP5024_OUT0_CLR,
+		.bank_brt_reg = LP5024_BNK_BRT,
+		.bank_mix_reg = LP5024_BNKA_CLR,
+		.reset_reg = LP5024_RESET,
+		.lp50xx_regmap_config = lp5024_regmap_config,
+	},
+	[LP5030] = {
+		.num_leds = LP5030_MAX_LEDS,
+		.led_brightness0_reg = LP5036_LED0_BRT,
+		.mix_out0_reg = LP5036_OUT0_CLR,
+		.bank_brt_reg = LP5036_BNK_BRT,
+		.bank_mix_reg = LP5036_BNKA_CLR,
+		.reset_reg = LP5036_RESET,
+		.lp50xx_regmap_config = lp5036_regmap_config,
+	},
+	[LP5036] = {
+		.num_leds = LP5036_MAX_LEDS,
+		.led_brightness0_reg = LP5036_LED0_BRT,
+		.mix_out0_reg = LP5036_OUT0_CLR,
+		.bank_brt_reg = LP5036_BNK_BRT,
+		.bank_mix_reg = LP5036_BNKA_CLR,
+		.reset_reg = LP5036_RESET,
+		.lp50xx_regmap_config = lp5036_regmap_config,
+	},
+};
+
+static int lp50xx_brightness_set(struct led_classdev *cdev,
+			     enum led_brightness brightness)
+{
+	struct lp50xx_led *led = container_of(cdev, struct lp50xx_led, led_dev);
+	const struct lp50xx_chip_info *led_chip = led->priv->chip_info;
+	struct led_mc_color_entry *color_data;
+	u8 led_offset, reg_val, reg_color_offset;
+	int ret = 0;
+
+	mutex_lock(&led->priv->lock);
+
+	if (led->ctrl_bank_enabled)
+		reg_val = led_chip->bank_brt_reg;
+	else
+		reg_val = led_chip->led_brightness0_reg +
+			  led->led_number;
+
+	ret = regmap_write(led->priv->regmap, reg_val, brightness);
+	if (ret) {
+		dev_err(&led->priv->client->dev,
+			"Cannot write brightness value %d\n", ret);
+		goto out;
+	}
+
+	list_for_each_entry(color_data, &led->mc_cdev.color_list, list) {
+		if (color_data->led_color_id == LED_COLOR_ID_RED)
+			reg_color_offset = 0;
+		else if (color_data->led_color_id == LED_COLOR_ID_GREEN)
+			reg_color_offset = 1;
+		else if (color_data->led_color_id == LED_COLOR_ID_BLUE)
+			reg_color_offset = 2;
+		else
+			continue;
+
+		if (led->ctrl_bank_enabled) {
+			reg_val = led_chip->bank_mix_reg + reg_color_offset;
+		} else {
+			led_offset = (led->led_number * 3)  + reg_color_offset;
+			reg_val = led_chip->mix_out0_reg + led_offset;
+		}
+
+		ret = regmap_write(led->priv->regmap, reg_val,
+				   color_data->intensity);
+		if (ret) {
+			dev_err(&led->priv->client->dev,
+				"Cannot write intensity value %d\n", ret);
+			goto out;
+		}
+	}
+out:
+	mutex_unlock(&led->priv->lock);
+	return ret;
+}
+
+static enum led_brightness lp50xx_brightness_get(struct led_classdev *cdev)
+{
+	struct lp50xx_led *led = container_of(cdev, struct lp50xx_led, led_dev);
+	const struct lp50xx_chip_info *led_chip = led->priv->chip_info;
+	unsigned int brt_val;
+	u8 reg_val;
+	int ret;
+
+	mutex_lock(&led->priv->lock);
+
+	if (led->ctrl_bank_enabled)
+		reg_val = led_chip->bank_brt_reg;
+	else
+		reg_val = led_chip->led_brightness0_reg + led->led_number;
+
+	ret = regmap_read(led->priv->regmap, reg_val, &brt_val);
+
+	mutex_unlock(&led->priv->lock);
+
+	return brt_val;
+}
+
+static int lp50xx_set_banks(struct lp50xx *priv, u32 led_banks[])
+{
+	u8 led_config_lo, led_config_hi;
+	u32 bank_enable_mask = 0;
+	int ret;
+	int i;
+
+	for (i = 0; i < priv->chip_info->num_leds; i++)
+		bank_enable_mask |= (1 << led_banks[i]);
+
+	led_config_lo = (u8)(bank_enable_mask & 0xff);
+	led_config_hi = (u8)(bank_enable_mask >> 8) & 0xff;
+
+	ret = regmap_write(priv->regmap, LP50XX_LED_CFG0, led_config_lo);
+	if (ret)
+		return ret;
+
+	if (led_config_hi)
+		ret = regmap_write(priv->regmap, LP5036_LED_CFG1,
+				   led_config_hi);
+
+	return ret;
+}
+
+static int lp50xx_reset(struct lp50xx *priv)
+{
+	if (priv->enable_gpio)
+		return gpiod_direction_output(priv->enable_gpio, 1);
+	else
+		return regmap_write(priv->regmap, priv->chip_info->reset_reg,
+				    LP50XX_SW_RESET);
+}
+
+static int lp50xx_enable_disable(struct lp50xx *priv, u8 enable_disable)
+{
+	return regmap_write(priv->regmap, LP50XX_DEV_CFG0, enable_disable);
+}
+
+static int lp50xx_probe_dt(struct lp50xx *priv)
+{
+	u32 led_banks[LP5036_MAX_LED_MODULES];
+	struct fwnode_handle *child = NULL;
+	struct fwnode_handle *led_node = NULL;
+	struct led_init_data init_data;
+	struct lp50xx_led *led;
+	int num_colors;
+	u32 color_id;
+	int led_number;
+	size_t i = 0;
+	int ret;
+
+	priv->enable_gpio = devm_gpiod_get_optional(&priv->client->dev,
+						   "enable", GPIOD_OUT_LOW);
+	if (IS_ERR(priv->enable_gpio)) {
+		ret = PTR_ERR(priv->enable_gpio);
+		dev_err(&priv->client->dev, "Failed to get enable gpio: %d\n",
+			ret);
+		return ret;
+	}
+
+	priv->regulator = devm_regulator_get(&priv->client->dev, "vled");
+	if (IS_ERR(priv->regulator))
+		priv->regulator = NULL;
+
+	device_for_each_child_node(&priv->client->dev, child) {
+		led = &priv->leds[i];
+		if (fwnode_property_present(child, "ti,led-bank")) {
+			ret = fwnode_property_read_u32_array(child,
+							     "ti,led-bank",
+							     NULL, 0);
+			ret = fwnode_property_read_u32_array(child,
+							     "ti,led-bank",
+							     led_banks,
+							     ret);
+
+			priv->num_of_banked_leds = ARRAY_SIZE(led_banks);
+
+			ret = lp50xx_set_banks(priv, led_banks);
+			if (ret) {
+				dev_err(&priv->client->dev,
+					"Cannot setup banked LEDs\n");
+				fwnode_handle_put(child);
+				goto child_out;
+			}
+			led->ctrl_bank_enabled = 1;
+
+		} else {
+			ret = fwnode_property_read_u32(child, "reg",
+					       &led_number);
+
+			led->led_number = led_number;
+		}
+		if (ret) {
+			dev_err(&priv->client->dev,
+				"led sourcing property missing\n");
+			fwnode_handle_put(child);
+			goto child_out;
+		}
+
+		if (led_number > priv->chip_info->num_leds) {
+			dev_err(&priv->client->dev,
+				"led-sources property is invalid\n");
+			ret = -EINVAL;
+			fwnode_handle_put(child);
+			goto child_out;
+		}
+
+		init_data.fwnode = child;
+		fwnode_property_read_string(child, "linux,default-trigger",
+				    &led->led_dev.default_trigger);
+		num_colors = 0;
+
+		fwnode_for_each_child_node(child, led_node) {
+			ret = fwnode_property_read_u32(led_node, "color",
+						       &color_id);
+			if (ret)
+				dev_err(&priv->client->dev,
+				"Cannot read color\n");
+
+			set_bit(color_id, &led->mc_cdev.available_colors);
+			num_colors++;
+
+		}
+
+		led->priv = priv;
+		led->mc_cdev.num_leds = num_colors;
+		led->mc_cdev.led_cdev = &led->led_dev;
+		led->led_dev.brightness_set_blocking = lp50xx_brightness_set;
+		led->led_dev.brightness_get = lp50xx_brightness_get;
+		ret = led_classdev_multicolor_register_ext(&priv->client->dev,
+						       &led->mc_cdev,
+						       &init_data);
+		if (ret) {
+			dev_err(&priv->client->dev, "led register err: %d\n",
+				ret);
+			fwnode_handle_put(child);
+			goto child_out;
+		}
+		i++;
+	}
+
+child_out:
+	return ret;
+}
+
+static int lp50xx_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	struct lp50xx *led;
+	int count;
+	int ret;
+
+	count = device_get_child_node_count(&client->dev);
+	if (!count) {
+		dev_err(&client->dev, "LEDs are not defined in device tree!");
+		return -ENODEV;
+	}
+
+	led = devm_kzalloc(&client->dev, struct_size(led, leds, count),
+			   GFP_KERNEL);
+	if (!led)
+		return -ENOMEM;
+
+	mutex_init(&led->lock);
+	led->client = client;
+	led->dev = &client->dev;
+	led->chip_info = &lp50xx_chip_info_tbl[id->driver_data];
+	i2c_set_clientdata(client, led);
+
+	led->regmap = devm_regmap_init_i2c(client,
+					&led->chip_info->lp50xx_regmap_config);
+	if (IS_ERR(led->regmap)) {
+		ret = PTR_ERR(led->regmap);
+		dev_err(&client->dev, "Failed to allocate register map: %d\n",
+			ret);
+		return ret;
+	}
+
+	ret = lp50xx_reset(led);
+	if (ret)
+		return ret;
+
+	ret = lp50xx_probe_dt(led);
+	if (ret)
+		return ret;
+
+	return lp50xx_enable_disable(led, LP50XX_CHIP_EN);
+}
+
+static int lp50xx_remove(struct i2c_client *client)
+{
+	struct lp50xx *led = i2c_get_clientdata(client);
+	int ret;
+
+	ret = lp50xx_enable_disable(led, LP50XX_CHIP_EN);
+	if (ret) {
+		dev_err(&led->client->dev, "Failed to disable regulator\n");
+		return ret;
+	}
+
+	if (led->enable_gpio)
+		gpiod_direction_output(led->enable_gpio, 0);
+
+	if (led->regulator) {
+		ret = regulator_disable(led->regulator);
+		if (ret)
+			dev_err(&led->client->dev,
+				"Failed to disable regulator\n");
+	}
+
+	mutex_destroy(&led->lock);
+
+	return 0;
+}
+
+static const struct i2c_device_id lp50xx_id[] = {
+	{ "lp5009", LP5009 },
+	{ "lp5012", LP5012 },
+	{ "lp5018", LP5018 },
+	{ "lp5024", LP5024 },
+	{ "lp5030", LP5030 },
+	{ "lp5036", LP5036 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, lp50xx_id);
+
+static const struct of_device_id of_lp50xx_leds_match[] = {
+	{ .compatible = "ti,lp5009", .data = (void *)LP5009 },
+	{ .compatible = "ti,lp5012", .data = (void *)LP5012 },
+	{ .compatible = "ti,lp5018", .data = (void *)LP5018 },
+	{ .compatible = "ti,lp5024", .data = (void *)LP5024 },
+	{ .compatible = "ti,lp5030", .data = (void *)LP5030 },
+	{ .compatible = "ti,lp5036", .data = (void *)LP5036 },
+	{},
+};
+MODULE_DEVICE_TABLE(of, of_lp50xx_leds_match);
+
+static struct i2c_driver lp50xx_driver = {
+	.driver = {
+		.name	= "lp50xx",
+		.of_match_table = of_lp50xx_leds_match,
+	},
+	.probe		= lp50xx_probe,
+	.remove		= lp50xx_remove,
+	.id_table	= lp50xx_id,
+};
+module_i2c_driver(lp50xx_driver);
+
+MODULE_DESCRIPTION("Texas Instruments LP50XX LED driver");
+MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com>");
+MODULE_LICENSE("GPL v2");
-- 
2.22.0.214.g8dca754b1e


^ permalink raw reply	[flat|nested] 38+ messages in thread

* [PATCH v9 08/15] dt: bindings: lp55xx: Be consistent in the document with LED
  2019-09-25 17:46 [PATCH v9 00/15] Multicolor Framework Dan Murphy
                   ` (6 preceding siblings ...)
  2019-09-25 17:46 ` [PATCH v9 07/15] leds: lp50xx: Add the LP50XX family of the RGB LED driver Dan Murphy
@ 2019-09-25 17:46 ` Dan Murphy
  2019-09-25 21:31   ` Jacek Anaszewski
  2019-09-25 17:46 ` [PATCH v9 09/15] dt: bindings: lp55xx: Update binding for Multicolor Framework Dan Murphy
                   ` (6 subsequent siblings)
  14 siblings, 1 reply; 38+ messages in thread
From: Dan Murphy @ 2019-09-25 17:46 UTC (permalink / raw)
  To: jacek.anaszewski, pavel; +Cc: linux-leds, linux-kernel, Dan Murphy

Update the document to be consistent in case when using LED.
This should be capital throughout the document.

Signed-off-by: Dan Murphy <dmurphy@ti.com>
---
 Documentation/devicetree/bindings/leds/leds-lp55xx.txt | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/leds/leds-lp55xx.txt b/Documentation/devicetree/bindings/leds/leds-lp55xx.txt
index 1b66a413fb9d..bfe2805c5534 100644
--- a/Documentation/devicetree/bindings/leds/leds-lp55xx.txt
+++ b/Documentation/devicetree/bindings/leds/leds-lp55xx.txt
@@ -1,4 +1,4 @@
-Binding for TI/National Semiconductor LP55xx Led Drivers
+Binding for TI/National Semiconductor LP55xx LED Drivers
 
 Required properties:
 - compatible: one of
@@ -12,8 +12,8 @@ Required properties:
 - clock-mode: Input clock mode, (0: automode, 1: internal, 2: external)
 
 Each child has own specific current settings
-- led-cur: Current setting at each led channel (mA x10, 0 if led is not connected)
-- max-cur: Maximun current at each led channel.
+- led-cur: Current setting at each LED channel (mA x10, 0 if LED is not connected)
+- max-cur: Maximun current at each LED channel.
 
 Optional properties:
 - enable-gpio: GPIO attached to the chip's enable pin
-- 
2.22.0.214.g8dca754b1e


^ permalink raw reply	[flat|nested] 38+ messages in thread

* [PATCH v9 09/15] dt: bindings: lp55xx: Update binding for Multicolor Framework
  2019-09-25 17:46 [PATCH v9 00/15] Multicolor Framework Dan Murphy
                   ` (7 preceding siblings ...)
  2019-09-25 17:46 ` [PATCH v9 08/15] dt: bindings: lp55xx: Be consistent in the document with LED Dan Murphy
@ 2019-09-25 17:46 ` Dan Murphy
  2019-09-25 21:34   ` Jacek Anaszewski
  2019-09-25 17:46 ` [PATCH v9 10/15] ARM: dts: n900: Add reg property to the LP5523 channel node Dan Murphy
                   ` (5 subsequent siblings)
  14 siblings, 1 reply; 38+ messages in thread
From: Dan Murphy @ 2019-09-25 17:46 UTC (permalink / raw)
  To: jacek.anaszewski, pavel
  Cc: linux-leds, linux-kernel, Dan Murphy, Tony Lindgren,
	Benoît Cousson, Linus Walleij, Shawn Guo, Sascha Hauer,
	Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team

Update the DT binding to include the properties to use the
multicolor framework for the devices that use the LP55xx
framework.

Signed-off-by: Dan Murphy <dmurphy@ti.com>
CC: Tony Lindgren <tony@atomide.com>
CC: "Benoît Cousson" <bcousson@baylibre.com>
CC: Linus Walleij <linus.walleij@linaro.org>
CC: Shawn Guo <shawnguo@kernel.org>
CC: Sascha Hauer <s.hauer@pengutronix.de>
CC: Pengutronix Kernel Team <kernel@pengutronix.de>
CC: Fabio Estevam <festevam@gmail.com>
CC: NXP Linux Team <linux-imx@nxp.com>
---
 .../devicetree/bindings/leds/leds-lp55xx.txt  | 99 +++++++++++++++++++
 1 file changed, 99 insertions(+)

diff --git a/Documentation/devicetree/bindings/leds/leds-lp55xx.txt b/Documentation/devicetree/bindings/leds/leds-lp55xx.txt
index bfe2805c5534..c120d2bde3bd 100644
--- a/Documentation/devicetree/bindings/leds/leds-lp55xx.txt
+++ b/Documentation/devicetree/bindings/leds/leds-lp55xx.txt
@@ -1,6 +1,8 @@
 Binding for TI/National Semiconductor LP55xx LED Drivers
 
 Required properties:
+- #address-cells: 1
+- #size-cells: 0
 - compatible: one of
 	national,lp5521
 	national,lp5523
@@ -14,6 +16,18 @@ Required properties:
 Each child has own specific current settings
 - led-cur: Current setting at each LED channel (mA x10, 0 if LED is not connected)
 - max-cur: Maximun current at each LED channel.
+- reg: Output channel for the LED.  This is zero based channel identifier and
+	the data sheet is a one based channel identifier.
+	reg value to output to LED output number
+	D1 = reg value is 0
+	D2 = reg value is 1
+	D3 = reg value is 2
+	D4 = reg value is 3
+	D5 = reg value is 4
+	D6 = reg value is 5
+	D7 = reg value is 6
+	D8 = reg value is 7
+	D9 = reg value is 8
 
 Optional properties:
 - enable-gpio: GPIO attached to the chip's enable pin
@@ -35,23 +49,28 @@ example 1) LP5521
 on channel 0.
 
 lp5521@32 {
+	#address-cells = <1>;
+	#size-cells = <0>;
 	compatible = "national,lp5521";
 	reg = <0x32>;
 	label = "lp5521_pri";
 	clock-mode = /bits/ 8 <2>;
 
 	chan0 {
+		reg = <0>;
 		led-cur = /bits/ 8 <0x2f>;
 		max-cur = /bits/ 8 <0x5f>;
 		linux,default-trigger = "heartbeat";
 	};
 
 	chan1 {
+		reg = <1>;
 		led-cur = /bits/ 8 <0x2f>;
 		max-cur = /bits/ 8 <0x5f>;
 	};
 
 	chan2 {
+		reg = <2>;
 		led-cur = /bits/ 8 <0x2f>;
 		max-cur = /bits/ 8 <0x5f>;
 	};
@@ -70,59 +89,70 @@ ASEL1    ASEL0    Address
  VEN      VEN       35h
 
 lp5523@32 {
+	#address-cells = <1>;
+	#size-cells = <0>;
 	compatible = "national,lp5523";
 	reg = <0x32>;
 	clock-mode = /bits/ 8 <1>;
 
 	chan0 {
+		reg = <0>;
 		chan-name = "d1";
 		led-cur = /bits/ 8 <0x14>;
 		max-cur = /bits/ 8 <0x20>;
 	};
 
 	chan1 {
+		reg = <1>;
 		chan-name = "d2";
 		led-cur = /bits/ 8 <0x14>;
 		max-cur = /bits/ 8 <0x20>;
 	};
 
 	chan2 {
+		reg = <2>;
 		chan-name = "d3";
 		led-cur = /bits/ 8 <0x14>;
 		max-cur = /bits/ 8 <0x20>;
 	};
 
 	chan3 {
+		reg = <3>;
 		chan-name = "d4";
 		led-cur = /bits/ 8 <0x14>;
 		max-cur = /bits/ 8 <0x20>;
 	};
 
 	chan4 {
+		reg = <4>;
 		chan-name = "d5";
 		led-cur = /bits/ 8 <0x14>;
 		max-cur = /bits/ 8 <0x20>;
 	};
 
 	chan5 {
+		reg = <5>;
 		chan-name = "d6";
 		led-cur = /bits/ 8 <0x14>;
 		max-cur = /bits/ 8 <0x20>;
 	};
 
 	chan6 {
+		reg = <6>;
 		chan-name = "d7";
 		led-cur = /bits/ 8 <0x14>;
 		max-cur = /bits/ 8 <0x20>;
 	};
 
 	chan7 {
+		reg = <7>;
 		chan-name = "d8";
 		led-cur = /bits/ 8 <0x14>;
 		max-cur = /bits/ 8 <0x20>;
 	};
 
 	chan8 {
+		reg = <8>;
 		chan-name = "d9";
 		led-cur = /bits/ 8 <0x14>;
 		max-cur = /bits/ 8 <0x20>;
@@ -133,29 +163,35 @@ example 3) LP5562
 4 channels are defined.
 
 lp5562@30 {
+	#address-cells = <1>;
+	#size-cells = <0>;
 	compatible = "ti,lp5562";
 	reg = <0x30>;
 	clock-mode = /bits/8 <2>;
 
 	chan0 {
+		reg = <0>;
 		chan-name = "R";
 		led-cur = /bits/ 8 <0x20>;
 		max-cur = /bits/ 8 <0x60>;
 	};
 
 	chan1 {
+		reg = <1>;
 		chan-name = "G";
 		led-cur = /bits/ 8 <0x20>;
 		max-cur = /bits/ 8 <0x60>;
 	};
 
 	chan2 {
+		reg = <2>;
 		chan-name = "B";
 		led-cur = /bits/ 8 <0x20>;
 		max-cur = /bits/ 8 <0x60>;
 	};
 
 	chan3 {
+		reg = <3>;
 		chan-name = "W";
 		led-cur = /bits/ 8 <0x20>;
 		max-cur = /bits/ 8 <0x60>;
@@ -167,62 +203,125 @@ example 4) LP8501
 Others are same as LP5523.
 
 lp8501@32 {
+	#address-cells = <1>;
+	#size-cells = <0>;
 	compatible = "ti,lp8501";
 	reg = <0x32>;
 	clock-mode = /bits/ 8 <2>;
 	pwr-sel = /bits/ 8 <3>;	/* D1~9 connected to VOUT */
 
 	chan0 {
+		reg = <0>;
 		chan-name = "d1";
 		led-cur = /bits/ 8 <0x14>;
 		max-cur = /bits/ 8 <0x20>;
 	};
 
 	chan1 {
+		reg = <1>;
 		chan-name = "d2";
 		led-cur = /bits/ 8 <0x14>;
 		max-cur = /bits/ 8 <0x20>;
 	};
 
 	chan2 {
+		reg = <2>;
 		chan-name = "d3";
 		led-cur = /bits/ 8 <0x14>;
 		max-cur = /bits/ 8 <0x20>;
 	};
 
 	chan3 {
+		reg = <3>;
 		chan-name = "d4";
 		led-cur = /bits/ 8 <0x14>;
 		max-cur = /bits/ 8 <0x20>;
 	};
 
 	chan4 {
+		reg = <4>;
 		chan-name = "d5";
 		led-cur = /bits/ 8 <0x14>;
 		max-cur = /bits/ 8 <0x20>;
 	};
 
 	chan5 {
+		reg = <5>;
 		chan-name = "d6";
 		led-cur = /bits/ 8 <0x14>;
 		max-cur = /bits/ 8 <0x20>;
 	};
 
 	chan6 {
+		reg = <6>;
 		chan-name = "d7";
 		led-cur = /bits/ 8 <0x14>;
 		max-cur = /bits/ 8 <0x20>;
 	};
 
 	chan7 {
+		reg = <7>;
 		chan-name = "d8";
 		led-cur = /bits/ 8 <0x14>;
 		max-cur = /bits/ 8 <0x20>;
 	};
 
 	chan8 {
+		reg = <8>;
 		chan-name = "d9";
 		led-cur = /bits/ 8 <0x14>;
 		max-cur = /bits/ 8 <0x20>;
 	};
 };
+
+Multicolor Framework Support
+In addition to the nodes and properties defined above for device support the
+properties below are needed for multicolor framework support as defined in
+Documentation/devicetree/bindings/leds/leds-class-multicolor.txt
+
+Required child properties for multicolor framework
+	- color : Must be LED_COLOR_ID_MULTI
+	- function : see Documentation/devicetree/bindings/leds/common.txt
+
+Required grandchildren properties
+	- reg : This is the LED output of the device
+	- color : see Documentation/devicetree/bindings/leds/common.txt
+
+Multicolor LED example:
+lp5523: lp5523@32 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	compatible = "national,lp5523";
+	reg = <0x32>;
+	clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */
+
+	multi-led@2 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <2>;
+		color = <LED_COLOR_ID_MULTI>;
+		function = LED_FUNCTION_STANDBY;
+		linux,default-trigger = "heartbeat";
+
+		led@0 {
+			led-cur = /bits/ 8 <50>;
+			max-cur = /bits/ 8 <100>;
+			reg = <0x0>;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+
+		led@1 {
+			led-cur = /bits/ 8 <50>;
+			max-cur = /bits/ 8 <100>;
+			reg = <0x1>;
+			color = <LED_COLOR_ID_BLUE>;
+		};
+
+		led@6 {
+			led-cur = /bits/ 8 <50>;
+			max-cur = /bits/ 8 <100>;
+			reg = <0x6>;
+			color = <LED_COLOR_ID_RED>;
+		};
+	};
+};
-- 
2.22.0.214.g8dca754b1e


^ permalink raw reply	[flat|nested] 38+ messages in thread

* [PATCH v9 10/15] ARM: dts: n900: Add reg property to the LP5523 channel node
  2019-09-25 17:46 [PATCH v9 00/15] Multicolor Framework Dan Murphy
                   ` (8 preceding siblings ...)
  2019-09-25 17:46 ` [PATCH v9 09/15] dt: bindings: lp55xx: Update binding for Multicolor Framework Dan Murphy
@ 2019-09-25 17:46 ` Dan Murphy
  2019-09-25 17:46 ` [PATCH v9 11/15] ARM: dts: imx6dl-yapp4: Add reg property to the lp5562 " Dan Murphy
                   ` (4 subsequent siblings)
  14 siblings, 0 replies; 38+ messages in thread
From: Dan Murphy @ 2019-09-25 17:46 UTC (permalink / raw)
  To: jacek.anaszewski, pavel
  Cc: linux-leds, linux-kernel, Dan Murphy, Tony Lindgren, Benoît Cousson

Add the reg property to each channel node.  This update is
to accomodate the multicolor framework.  In addition to the
accomodation this allows the LEDs to be placed on any channel
and allow designs to skip channels as opposed to requiring
sequential order.

Signed-off-by: Dan Murphy <dmurphy@ti.com>
CC: Tony Lindgren <tony@atomide.com>
CC: "Benoît Cousson" <bcousson@baylibre.com>

k# interactive rebase in progress; onto ae89cc6d4a8c
---
 arch/arm/boot/dts/omap3-n900.dts | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index 84a5ade1e865..e6d0a7c52c5d 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -607,6 +607,8 @@
 	};
 
 	lp5523: lp5523@32 {
+		#address-cells = <1>;
+		#size-cells = <0>;
 		compatible = "national,lp5523";
 		reg = <0x32>;
 		clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */
@@ -616,54 +618,63 @@
 			chan-name = "lp5523:kb1";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
+			reg = <0>;
 		};
 
 		chan1 {
 			chan-name = "lp5523:kb2";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
+			reg = <1>;
 		};
 
 		chan2 {
 			chan-name = "lp5523:kb3";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
+			reg = <2>;
 		};
 
 		chan3 {
 			chan-name = "lp5523:kb4";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
+			reg = <3>;
 		};
 
 		chan4 {
 			chan-name = "lp5523:b";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
+			reg = <4>;
 		};
 
 		chan5 {
 			chan-name = "lp5523:g";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
+			reg = <5>;
 		};
 
 		chan6 {
 			chan-name = "lp5523:r";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
+			reg = <6>;
 		};
 
 		chan7 {
 			chan-name = "lp5523:kb5";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
+			reg = <7>;
 		};
 
 		chan8 {
 			chan-name = "lp5523:kb6";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
+			reg = <8>;
 		};
 	};
 
-- 
2.22.0.214.g8dca754b1e


^ permalink raw reply	[flat|nested] 38+ messages in thread

* [PATCH v9 11/15] ARM: dts: imx6dl-yapp4: Add reg property to the lp5562 channel node
  2019-09-25 17:46 [PATCH v9 00/15] Multicolor Framework Dan Murphy
                   ` (9 preceding siblings ...)
  2019-09-25 17:46 ` [PATCH v9 10/15] ARM: dts: n900: Add reg property to the LP5523 channel node Dan Murphy
@ 2019-09-25 17:46 ` " Dan Murphy
  2019-09-25 18:00   ` Fabio Estevam
  2019-09-25 17:46 ` [PATCH v9 12/15] ARM: dts: ste-href: Add reg property to the LP5521 channel nodes Dan Murphy
                   ` (3 subsequent siblings)
  14 siblings, 1 reply; 38+ messages in thread
From: Dan Murphy @ 2019-09-25 17:46 UTC (permalink / raw)
  To: jacek.anaszewski, pavel
  Cc: linux-leds, linux-kernel, Dan Murphy, Shawn Guo, Sascha Hauer,
	Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team

Add the reg property to each channel node.  This update is
to accomodate the multicolor framework.  In addition to the
accomodation this allows the LEDs to be placed on any channel
and allow designs to skip channels as opposed to requiring
sequential order.

Signed-off-by: Dan Murphy <dmurphy@ti.com>
CC: Shawn Guo <shawnguo@kernel.org>
CC: Sascha Hauer <s.hauer@pengutronix.de>
CC: Pengutronix Kernel Team <kernel@pengutronix.de>
CC: Fabio Estevam <festevam@gmail.com>
CC: NXP Linux Team <linux-imx@nxp.com>
---
 arch/arm/boot/dts/imx6dl-yapp4-common.dtsi | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
index e8d800fec637..cafc99fce1ba 100644
--- a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
+++ b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
@@ -257,29 +257,35 @@
 		reg = <0x30>;
 		clock-mode = /bits/ 8 <1>;
 		status = "disabled";
+		#address-cells = <1>;
+		#size-cells = <0>;
 
 		chan0 {
 			chan-name = "R";
 			led-cur = /bits/ 8 <0x20>;
 			max-cur = /bits/ 8 <0x60>;
+			reg = <0>;
 		};
 
 		chan1 {
 			chan-name = "G";
 			led-cur = /bits/ 8 <0x20>;
 			max-cur = /bits/ 8 <0x60>;
+			reg = <1>;
 		};
 
 		chan2 {
 			chan-name = "B";
 			led-cur = /bits/ 8 <0x20>;
 			max-cur = /bits/ 8 <0x60>;
+			reg = <2>;
 		};
 
 		chan3 {
 			chan-name = "W";
 			led-cur = /bits/ 8 <0x0>;
 			max-cur = /bits/ 8 <0x0>;
+			reg = <3>;
 		};
 	};
 
-- 
2.22.0.214.g8dca754b1e


^ permalink raw reply	[flat|nested] 38+ messages in thread

* [PATCH v9 12/15] ARM: dts: ste-href: Add reg property to the LP5521 channel nodes
  2019-09-25 17:46 [PATCH v9 00/15] Multicolor Framework Dan Murphy
                   ` (10 preceding siblings ...)
  2019-09-25 17:46 ` [PATCH v9 11/15] ARM: dts: imx6dl-yapp4: Add reg property to the lp5562 " Dan Murphy
@ 2019-09-25 17:46 ` Dan Murphy
  2019-10-04 21:30   ` Linus Walleij
  2019-09-25 17:46 ` [PATCH v9 13/15] leds: lp55xx: Update the lp55xx to use the multi color framework Dan Murphy
                   ` (2 subsequent siblings)
  14 siblings, 1 reply; 38+ messages in thread
From: Dan Murphy @ 2019-09-25 17:46 UTC (permalink / raw)
  To: jacek.anaszewski, pavel
  Cc: linux-leds, linux-kernel, Dan Murphy, Linus Walleij

Add the reg property to each channel node.  This update is
to accomodate the multicolor framework.  In addition to the
accomodation this allows the LEDs to be placed on any channel
and allow designs to skip channels as opposed to requiring
sequential order.

Signed-off-by: Dan Murphy <dmurphy@ti.com>
CC: Linus Walleij <linus.walleij@linaro.org>
---
 arch/arm/boot/dts/ste-href.dtsi | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi
index 6422c53f2046..46a7dfa20a2e 100644
--- a/arch/arm/boot/dts/ste-href.dtsi
+++ b/arch/arm/boot/dts/ste-href.dtsi
@@ -56,16 +56,21 @@
 				reg = <0x33>;
 				label = "lp5521_pri";
 				clock-mode = /bits/ 8 <2>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				chan0 {
+					reg = <0>;
 					led-cur = /bits/ 8 <0x2f>;
 					max-cur = /bits/ 8 <0x5f>;
 					linux,default-trigger = "heartbeat";
 				};
 				chan1 {
+					reg = <1>;
 					led-cur = /bits/ 8 <0x2f>;
 					max-cur = /bits/ 8 <0x5f>;
 				};
 				chan2 {
+					reg = <2>;
 					led-cur = /bits/ 8 <0x2f>;
 					max-cur = /bits/ 8 <0x5f>;
 				};
@@ -75,15 +80,20 @@
 				reg = <0x34>;
 				label = "lp5521_sec";
 				clock-mode = /bits/ 8 <2>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				chan0 {
+					reg = <0>;
 					led-cur = /bits/ 8 <0x2f>;
 					max-cur = /bits/ 8 <0x5f>;
 				};
 				chan1 {
+					reg = <1>;
 					led-cur = /bits/ 8 <0x2f>;
 					max-cur = /bits/ 8 <0x5f>;
 				};
 				chan2 {
+					reg = <2>;
 					led-cur = /bits/ 8 <0x2f>;
 					max-cur = /bits/ 8 <0x5f>;
 				};
-- 
2.22.0.214.g8dca754b1e


^ permalink raw reply	[flat|nested] 38+ messages in thread

* [PATCH v9 13/15] leds: lp55xx: Update the lp55xx to use the multi color framework
  2019-09-25 17:46 [PATCH v9 00/15] Multicolor Framework Dan Murphy
                   ` (11 preceding siblings ...)
  2019-09-25 17:46 ` [PATCH v9 12/15] ARM: dts: ste-href: Add reg property to the LP5521 channel nodes Dan Murphy
@ 2019-09-25 17:46 ` Dan Murphy
  2019-09-25 22:00   ` Jacek Anaszewski
  2019-09-25 17:46 ` [PATCH v9 14/15] leds: lp55xx: Fix checkpatch file permissions issues Dan Murphy
  2019-09-25 17:46 ` [PATCH v9 15/15] leds: lp5523: Fix checkpatch issues in the code Dan Murphy
  14 siblings, 1 reply; 38+ messages in thread
From: Dan Murphy @ 2019-09-25 17:46 UTC (permalink / raw)
  To: jacek.anaszewski, pavel; +Cc: linux-leds, linux-kernel, Dan Murphy

Update the lp5523 to allow the use of the multi color framework.

Signed-off-by: Dan Murphy <dmurphy@ti.com>
---
 drivers/leds/Kconfig                      |   1 +
 drivers/leds/leds-lp5523.c                |  13 ++
 drivers/leds/leds-lp55xx-common.c         | 150 ++++++++++++++++++----
 drivers/leds/leds-lp55xx-common.h         |  11 ++
 include/linux/platform_data/leds-lp55xx.h |   6 +
 5 files changed, 157 insertions(+), 24 deletions(-)

diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 84f60e35c5ee..dc3d9f2194cd 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -377,6 +377,7 @@ config LEDS_LP50XX
 config LEDS_LP55XX_COMMON
 	tristate "Common Driver for TI/National LP5521/5523/55231/5562/8501"
 	depends on LEDS_LP5521 || LEDS_LP5523 || LEDS_LP5562 || LEDS_LP8501
+	depends on LEDS_CLASS_MULTI_COLOR && OF
 	select FW_LOADER
 	select FW_LOADER_USER_HELPER
 	help
diff --git a/drivers/leds/leds-lp5523.c b/drivers/leds/leds-lp5523.c
index d0b931a136b9..8b2cdb98fed6 100644
--- a/drivers/leds/leds-lp5523.c
+++ b/drivers/leds/leds-lp5523.c
@@ -791,6 +791,18 @@ static ssize_t store_master_fader_leds(struct device *dev,
 	return ret;
 }
 
+static int lp5523_led_intensity(struct lp55xx_led *led, int chan_num)
+{
+	struct lp55xx_chip *chip = led->chip;
+	int ret;
+
+	mutex_lock(&chip->lock);
+	ret = lp55xx_write(chip, LP5523_REG_LED_PWM_BASE + chan_num,
+		     led->brightness);
+	mutex_unlock(&chip->lock);
+	return ret;
+}
+
 static int lp5523_led_brightness(struct lp55xx_led *led)
 {
 	struct lp55xx_chip *chip = led->chip;
@@ -857,6 +869,7 @@ static struct lp55xx_device_config lp5523_cfg = {
 	.max_channel  = LP5523_MAX_LEDS,
 	.post_init_device   = lp5523_post_init_device,
 	.brightness_fn      = lp5523_led_brightness,
+	.color_intensity_fn = lp5523_led_intensity,
 	.set_led_current    = lp5523_set_led_current,
 	.firmware_cb        = lp5523_firmware_loaded,
 	.run_engine         = lp5523_run_engine,
diff --git a/drivers/leds/leds-lp55xx-common.c b/drivers/leds/leds-lp55xx-common.c
index 44ced02b49f9..0e4b3a9d3047 100644
--- a/drivers/leds/leds-lp55xx-common.c
+++ b/drivers/leds/leds-lp55xx-common.c
@@ -136,9 +136,26 @@ static int lp55xx_set_brightness(struct led_classdev *cdev,
 {
 	struct lp55xx_led *led = cdev_to_lp55xx_led(cdev);
 	struct lp55xx_device_config *cfg = led->chip->cfg;
+	int brightness_val[LP55XX_MAX_GROUPED_CHAN];
+	int ret;
+	int i;
+
+	if (led->mc_cdev.num_leds > 1) {
+		led_mc_calc_brightness(&led->mc_cdev,
+				       brightness, brightness_val);
+		for (i = 0; i < led->mc_cdev.num_leds; i++) {
+			led->brightness = brightness_val[i];
+			ret = cfg->color_intensity_fn(led,
+						      led->grouped_channels[i]);
+			if (ret)
+				break;
+		}
+	} else {
+		led->brightness = (u8)brightness;
+		ret = cfg->brightness_fn(led);
+	}
 
-	led->brightness = (u8)brightness;
-	return cfg->brightness_fn(led);
+	return ret;
 }
 
 static int lp55xx_init_led(struct lp55xx_led *led,
@@ -147,9 +164,9 @@ static int lp55xx_init_led(struct lp55xx_led *led,
 	struct lp55xx_platform_data *pdata = chip->pdata;
 	struct lp55xx_device_config *cfg = chip->cfg;
 	struct device *dev = &chip->cl->dev;
+	int max_channel = cfg->max_channel;
 	char name[32];
 	int ret;
-	int max_channel = cfg->max_channel;
 
 	if (chan >= max_channel) {
 		dev_err(dev, "invalid channel: %d / %d\n", chan, max_channel);
@@ -159,10 +176,37 @@ static int lp55xx_init_led(struct lp55xx_led *led,
 	if (pdata->led_config[chan].led_current == 0)
 		return 0;
 
+	if (pdata->led_config[chan].name) {
+		led->cdev.name = pdata->led_config[chan].name;
+	} else {
+		snprintf(name, sizeof(name), "%s:channel%d",
+			pdata->label ? : chip->cl->name, chan);
+		led->cdev.name = name;
+	}
+
+	if (pdata->led_config[chan].num_colors > 1) {
+		led->mc_cdev.led_cdev = &led->cdev;
+		led->cdev.brightness_set_blocking = lp55xx_set_brightness;
+		led->cdev.groups = lp55xx_led_groups;
+		led->mc_cdev.num_leds = pdata->led_config[chan].num_colors;
+		led->mc_cdev.available_colors =
+			pdata->led_config[chan].available_colors;
+		memcpy(led->channel_color,
+		       pdata->led_config[chan].channel_color,
+		       sizeof(led->channel_color));
+		memcpy(led->grouped_channels,
+		       pdata->led_config[chan].grouped_channels,
+		       sizeof(led->grouped_channels));
+	} else {
+
+		led->cdev.default_trigger =
+			pdata->led_config[chan].default_trigger;
+		led->cdev.brightness_set_blocking = lp55xx_set_brightness;
+	}	led->cdev.groups = lp55xx_led_groups;
+
 	led->led_current = pdata->led_config[chan].led_current;
 	led->max_current = pdata->led_config[chan].max_current;
 	led->chan_nr = pdata->led_config[chan].chan_nr;
-	led->cdev.default_trigger = pdata->led_config[chan].default_trigger;
 
 	if (led->chan_nr >= max_channel) {
 		dev_err(dev, "Use channel numbers between 0 and %d\n",
@@ -170,18 +214,11 @@ static int lp55xx_init_led(struct lp55xx_led *led,
 		return -EINVAL;
 	}
 
-	led->cdev.brightness_set_blocking = lp55xx_set_brightness;
-	led->cdev.groups = lp55xx_led_groups;
-
-	if (pdata->led_config[chan].name) {
-		led->cdev.name = pdata->led_config[chan].name;
-	} else {
-		snprintf(name, sizeof(name), "%s:channel%d",
-			pdata->label ? : chip->cl->name, chan);
-		led->cdev.name = name;
-	}
+	if (pdata->led_config[chan].num_colors > 1)
+		ret = led_classdev_multicolor_register(dev, &led->mc_cdev);
+	else
+		ret = led_classdev_register(dev, &led->cdev);
 
-	ret = led_classdev_register(dev, &led->cdev);
 	if (ret) {
 		dev_err(dev, "led register err: %d\n", ret);
 		return ret;
@@ -466,7 +503,6 @@ int lp55xx_register_leds(struct lp55xx_led *led, struct lp55xx_chip *chip)
 		dev_err(&chip->cl->dev, "empty brightness configuration\n");
 		return -EINVAL;
 	}
-
 	for (i = 0; i < num_channels; i++) {
 
 		/* do not initialize channels that are not connected */
@@ -538,6 +574,76 @@ void lp55xx_unregister_sysfs(struct lp55xx_chip *chip)
 }
 EXPORT_SYMBOL_GPL(lp55xx_unregister_sysfs);
 
+static int lp5xx_parse_common_child(struct device_node *np,
+				     struct lp55xx_led_config *cfg,
+				     int chan_num, bool is_multicolor)
+{
+	u32 led_number;
+	int ret;
+
+	of_property_read_string(np, "chan-name",
+				&cfg[chan_num].name);
+	of_property_read_u8(np, "led-cur",
+			    &cfg[chan_num].led_current);
+	of_property_read_u8(np, "max-cur",
+			    &cfg[chan_num].max_current);
+
+	ret = of_property_read_u32(np, "reg", &led_number);
+	if (ret)
+		return ret;
+
+	if (led_number < 0 || led_number > 6)
+		return -EINVAL;
+
+	if (is_multicolor)
+		cfg[chan_num].grouped_channels[cfg[chan_num].num_colors]
+				= led_number;
+	else
+		cfg[chan_num].chan_nr = led_number;
+
+	return 0;
+}
+
+static int lp5xx_parse_channel_child(struct device_node *np,
+				     struct lp55xx_led_config *cfg,
+				     int child_number)
+{
+	struct device_node *child;
+	int channel_color;
+	u32 color_id;
+	int ret;
+
+	cfg[child_number].default_trigger =
+			of_get_property(np, "linux,default-trigger", NULL);
+
+	ret = of_property_read_u32(np, "color", &channel_color);
+	if (ret)
+		channel_color = ret;
+
+
+	if (channel_color == LED_COLOR_ID_MULTI) {
+		for_each_child_of_node(np, child) {
+			ret = lp5xx_parse_common_child(child, cfg,
+						       child_number, true);
+			if (ret)
+				return ret;
+			ret = of_property_read_u32(child, "color", &color_id);
+			if (ret)
+				return ret;
+
+			cfg[child_number].channel_color[cfg[child_number].num_colors] =
+				color_id;
+			set_bit(color_id, &cfg[child_number].available_colors);
+
+			cfg[child_number].num_colors++;
+		}
+	} else {
+		return lp5xx_parse_common_child(np, cfg, child_number, false);
+	}
+
+	return 0;
+}
+
 struct lp55xx_platform_data *lp55xx_of_populate_pdata(struct device *dev,
 						      struct device_node *np)
 {
@@ -546,6 +652,7 @@ struct lp55xx_platform_data *lp55xx_of_populate_pdata(struct device *dev,
 	struct lp55xx_led_config *cfg;
 	int num_channels;
 	int i = 0;
+	int ret;
 
 	pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
 	if (!pdata)
@@ -565,14 +672,9 @@ struct lp55xx_platform_data *lp55xx_of_populate_pdata(struct device *dev,
 	pdata->num_channels = num_channels;
 
 	for_each_child_of_node(np, child) {
-		cfg[i].chan_nr = i;
-
-		of_property_read_string(child, "chan-name", &cfg[i].name);
-		of_property_read_u8(child, "led-cur", &cfg[i].led_current);
-		of_property_read_u8(child, "max-cur", &cfg[i].max_current);
-		cfg[i].default_trigger =
-			of_get_property(child, "linux,default-trigger", NULL);
-
+		ret = lp5xx_parse_channel_child(child, cfg, i);
+		if (ret)
+			return ERR_PTR(-EINVAL);
 		i++;
 	}
 
diff --git a/drivers/leds/leds-lp55xx-common.h b/drivers/leds/leds-lp55xx-common.h
index 783ed5103ce5..d93813a72ec1 100644
--- a/drivers/leds/leds-lp55xx-common.h
+++ b/drivers/leds/leds-lp55xx-common.h
@@ -12,6 +12,10 @@
 #ifndef _LEDS_LP55XX_COMMON_H
 #define _LEDS_LP55XX_COMMON_H
 
+#include <linux/led-class-multicolor.h>
+
+#define LP55XX_MAX_GROUPED_CHAN	4
+
 enum lp55xx_engine_index {
 	LP55XX_ENGINE_INVALID,
 	LP55XX_ENGINE_1,
@@ -109,6 +113,9 @@ struct lp55xx_device_config {
 	/* access brightness register */
 	int (*brightness_fn)(struct lp55xx_led *led);
 
+	/* access specific brightness register */
+	int (*color_intensity_fn)(struct lp55xx_led *led, int chan_num);
+
 	/* current setting function */
 	void (*set_led_current) (struct lp55xx_led *led, u8 led_current);
 
@@ -159,6 +166,7 @@ struct lp55xx_chip {
  * struct lp55xx_led
  * @chan_nr         : Channel number
  * @cdev            : LED class device
+ * @mc_cdev	    : Multi color class device
  * @led_current     : Current setting at each led channel
  * @max_current     : Maximun current at each led channel
  * @brightness      : Brightness value
@@ -167,9 +175,12 @@ struct lp55xx_chip {
 struct lp55xx_led {
 	int chan_nr;
 	struct led_classdev cdev;
+	struct led_classdev_mc mc_cdev;
 	u8 led_current;
 	u8 max_current;
 	u8 brightness;
+	int channel_color[LP55XX_MAX_GROUPED_CHAN];
+	int grouped_channels[LP55XX_MAX_GROUPED_CHAN];
 	struct lp55xx_chip *chip;
 };
 
diff --git a/include/linux/platform_data/leds-lp55xx.h b/include/linux/platform_data/leds-lp55xx.h
index 96a787100fda..0ac29f537ab6 100644
--- a/include/linux/platform_data/leds-lp55xx.h
+++ b/include/linux/platform_data/leds-lp55xx.h
@@ -12,6 +12,8 @@
 #ifndef _LEDS_LP55XX_H
 #define _LEDS_LP55XX_H
 
+#include <linux/led-class-multicolor.h>
+
 /* Clock configuration */
 #define LP55XX_CLOCK_AUTO	0
 #define LP55XX_CLOCK_INT	1
@@ -23,6 +25,10 @@ struct lp55xx_led_config {
 	u8 chan_nr;
 	u8 led_current; /* mA x10, 0 if led is not connected */
 	u8 max_current;
+	int num_colors;
+	unsigned long available_colors;
+	u32 channel_color[LED_COLOR_ID_MAX];
+	int grouped_channels[LED_COLOR_ID_MAX];
 };
 
 struct lp55xx_predef_pattern {
-- 
2.22.0.214.g8dca754b1e


^ permalink raw reply	[flat|nested] 38+ messages in thread

* [PATCH v9 14/15] leds: lp55xx: Fix checkpatch file permissions issues
  2019-09-25 17:46 [PATCH v9 00/15] Multicolor Framework Dan Murphy
                   ` (12 preceding siblings ...)
  2019-09-25 17:46 ` [PATCH v9 13/15] leds: lp55xx: Update the lp55xx to use the multi color framework Dan Murphy
@ 2019-09-25 17:46 ` Dan Murphy
  2019-09-25 17:46 ` [PATCH v9 15/15] leds: lp5523: Fix checkpatch issues in the code Dan Murphy
  14 siblings, 0 replies; 38+ messages in thread
From: Dan Murphy @ 2019-09-25 17:46 UTC (permalink / raw)
  To: jacek.anaszewski, pavel; +Cc: linux-leds, linux-kernel, Dan Murphy

Fix the checkpatch warnings for the use of the file permission macros.
In converting the file permissions to the DEVICE_ATTR_XX macros the
call back function names needed to be updated within the code.

This means that the lp55xx_ needed to be dropped in the name to keep in
harmony with the ABI documentation.

Signed-off-by: Dan Murphy <dmurphy@ti.com>
---
 drivers/leds/leds-lp55xx-common.c | 22 ++++++++++------------
 1 file changed, 10 insertions(+), 12 deletions(-)

diff --git a/drivers/leds/leds-lp55xx-common.c b/drivers/leds/leds-lp55xx-common.c
index 0e4b3a9d3047..6f220050fa9d 100644
--- a/drivers/leds/leds-lp55xx-common.c
+++ b/drivers/leds/leds-lp55xx-common.c
@@ -78,7 +78,7 @@ static int lp55xx_post_init_device(struct lp55xx_chip *chip)
 	return cfg->post_init_device(chip);
 }
 
-static ssize_t lp55xx_show_current(struct device *dev,
+static ssize_t led_current_show(struct device *dev,
 			    struct device_attribute *attr,
 			    char *buf)
 {
@@ -87,7 +87,7 @@ static ssize_t lp55xx_show_current(struct device *dev,
 	return scnprintf(buf, PAGE_SIZE, "%d\n", led->led_current);
 }
 
-static ssize_t lp55xx_store_current(struct device *dev,
+static ssize_t led_current_store(struct device *dev,
 			     struct device_attribute *attr,
 			     const char *buf, size_t len)
 {
@@ -111,7 +111,7 @@ static ssize_t lp55xx_store_current(struct device *dev,
 	return len;
 }
 
-static ssize_t lp55xx_show_max_current(struct device *dev,
+static ssize_t max_current_show(struct device *dev,
 			    struct device_attribute *attr,
 			    char *buf)
 {
@@ -120,9 +120,8 @@ static ssize_t lp55xx_show_max_current(struct device *dev,
 	return scnprintf(buf, PAGE_SIZE, "%d\n", led->max_current);
 }
 
-static DEVICE_ATTR(led_current, S_IRUGO | S_IWUSR, lp55xx_show_current,
-		lp55xx_store_current);
-static DEVICE_ATTR(max_current, S_IRUGO , lp55xx_show_max_current, NULL);
+static DEVICE_ATTR_RW(led_current);
+static DEVICE_ATTR_RO(max_current);
 
 static struct attribute *lp55xx_led_attrs[] = {
 	&dev_attr_led_current.attr,
@@ -262,7 +261,7 @@ static int lp55xx_request_firmware(struct lp55xx_chip *chip)
 				GFP_KERNEL, chip, lp55xx_firmware_loaded);
 }
 
-static ssize_t lp55xx_show_engine_select(struct device *dev,
+static ssize_t select_engine_show(struct device *dev,
 			    struct device_attribute *attr,
 			    char *buf)
 {
@@ -272,7 +271,7 @@ static ssize_t lp55xx_show_engine_select(struct device *dev,
 	return sprintf(buf, "%d\n", chip->engine_idx);
 }
 
-static ssize_t lp55xx_store_engine_select(struct device *dev,
+static ssize_t select_engine_store(struct device *dev,
 			     struct device_attribute *attr,
 			     const char *buf, size_t len)
 {
@@ -314,7 +313,7 @@ static inline void lp55xx_run_engine(struct lp55xx_chip *chip, bool start)
 		chip->cfg->run_engine(chip, start);
 }
 
-static ssize_t lp55xx_store_engine_run(struct device *dev,
+static ssize_t run_engine_store(struct device *dev,
 			     struct device_attribute *attr,
 			     const char *buf, size_t len)
 {
@@ -339,9 +338,8 @@ static ssize_t lp55xx_store_engine_run(struct device *dev,
 	return len;
 }
 
-static DEVICE_ATTR(select_engine, S_IRUGO | S_IWUSR,
-		   lp55xx_show_engine_select, lp55xx_store_engine_select);
-static DEVICE_ATTR(run_engine, S_IWUSR, NULL, lp55xx_store_engine_run);
+static DEVICE_ATTR_RW(select_engine);
+static DEVICE_ATTR_WO(run_engine);
 
 static struct attribute *lp55xx_engine_attributes[] = {
 	&dev_attr_select_engine.attr,
-- 
2.22.0.214.g8dca754b1e


^ permalink raw reply	[flat|nested] 38+ messages in thread

* [PATCH v9 15/15] leds: lp5523: Fix checkpatch issues in the code
  2019-09-25 17:46 [PATCH v9 00/15] Multicolor Framework Dan Murphy
                   ` (13 preceding siblings ...)
  2019-09-25 17:46 ` [PATCH v9 14/15] leds: lp55xx: Fix checkpatch file permissions issues Dan Murphy
@ 2019-09-25 17:46 ` Dan Murphy
  14 siblings, 0 replies; 38+ messages in thread
From: Dan Murphy @ 2019-09-25 17:46 UTC (permalink / raw)
  To: jacek.anaszewski, pavel; +Cc: linux-leds, linux-kernel, Dan Murphy

Fix checkpatch errors and warnings for the LP5523.c device
driver.

Signed-off-by: Dan Murphy <dmurphy@ti.com>
---
 drivers/leds/leds-lp5523.c | 19 ++++++++++---------
 1 file changed, 10 insertions(+), 9 deletions(-)

diff --git a/drivers/leds/leds-lp5523.c b/drivers/leds/leds-lp5523.c
index 8b2cdb98fed6..c4a94903f8c4 100644
--- a/drivers/leds/leds-lp5523.c
+++ b/drivers/leds/leds-lp5523.c
@@ -23,13 +23,13 @@
 
 #define LP5523_PROGRAM_LENGTH		32	/* bytes */
 /* Memory is used like this:
-   0x00 engine 1 program
-   0x10 engine 2 program
-   0x20 engine 3 program
-   0x30 engine 1 muxing info
-   0x40 engine 2 muxing info
-   0x50 engine 3 muxing info
-*/
+ * 0x00 engine 1 program
+ * 0x10 engine 2 program
+ * 0x20 engine 3 program
+ * 0x30 engine 1 muxing info
+ * 0x40 engine 2 muxing info
+ * 0x50 engine 3 muxing info
+ */
 #define LP5523_MAX_LEDS			9
 
 /* Registers */
@@ -326,7 +326,7 @@ static int lp5523_update_program_memory(struct lp55xx_chip *chip,
 					const u8 *data, size_t size)
 {
 	u8 pattern[LP5523_PROGRAM_LENGTH] = {0};
-	unsigned cmd;
+	unsigned int cmd;
 	char c[3];
 	int nrchars;
 	int ret;
@@ -468,6 +468,7 @@ static int lp5523_mux_parse(const char *buf, u16 *mux, size_t len)
 static void lp5523_mux_to_array(u16 led_mux, char *array)
 {
 	int i, pos = 0;
+
 	for (i = 0; i < LP5523_MAX_LEDS; i++)
 		pos += sprintf(array + pos, "%x", LED_ACTIVE(led_mux, i));
 
@@ -506,7 +507,7 @@ static int lp5523_load_mux(struct lp55xx_chip *chip, u16 mux, int nr)
 	if (ret)
 		return ret;
 
-	ret = lp55xx_write(chip, LP5523_REG_PROG_MEM , (u8)(mux >> 8));
+	ret = lp55xx_write(chip, LP5523_REG_PROG_MEM, (u8)(mux >> 8));
 	if (ret)
 		return ret;
 
-- 
2.22.0.214.g8dca754b1e


^ permalink raw reply	[flat|nested] 38+ messages in thread

* Re: [PATCH v9 11/15] ARM: dts: imx6dl-yapp4: Add reg property to the lp5562 channel node
  2019-09-25 17:46 ` [PATCH v9 11/15] ARM: dts: imx6dl-yapp4: Add reg property to the lp5562 " Dan Murphy
@ 2019-09-25 18:00   ` Fabio Estevam
  2019-09-25 18:16     ` Dan Murphy
  0 siblings, 1 reply; 38+ messages in thread
From: Fabio Estevam @ 2019-09-25 18:00 UTC (permalink / raw)
  To: Dan Murphy
  Cc: Jacek Anaszewski, Pavel Machek, Linux LED Subsystem,
	linux-kernel, Shawn Guo, Sascha Hauer, Pengutronix Kernel Team,
	NXP Linux Team

Hi Dan,

On Wed, Sep 25, 2019 at 2:41 PM Dan Murphy <dmurphy@ti.com> wrote:

>
>                 chan0 {

This should be chan@0

>                         chan-name = "R";
>                         led-cur = /bits/ 8 <0x20>;
>                         max-cur = /bits/ 8 <0x60>;
> +                       reg = <0>;

Passing reg without its corresponding @ entry gives a dtc warning when
building with W=1.

^ permalink raw reply	[flat|nested] 38+ messages in thread

* Re: [PATCH v9 11/15] ARM: dts: imx6dl-yapp4: Add reg property to the lp5562 channel node
  2019-09-25 18:00   ` Fabio Estevam
@ 2019-09-25 18:16     ` Dan Murphy
  0 siblings, 0 replies; 38+ messages in thread
From: Dan Murphy @ 2019-09-25 18:16 UTC (permalink / raw)
  To: Fabio Estevam
  Cc: Jacek Anaszewski, Pavel Machek, Linux LED Subsystem,
	linux-kernel, Shawn Guo, Sascha Hauer, Pengutronix Kernel Team,
	NXP Linux Team

Fabio

On 9/25/19 1:00 PM, Fabio Estevam wrote:
> Hi Dan,
>
> On Wed, Sep 25, 2019 at 2:41 PM Dan Murphy <dmurphy@ti.com> wrote:
>
>>                  chan0 {
> This should be chan@0
>
>>                          chan-name = "R";
>>                          led-cur = /bits/ 8 <0x20>;
>>                          max-cur = /bits/ 8 <0x60>;
>> +                       reg = <0>;
> Passing reg without its corresponding @ entry gives a dtc warning when
> building with W=1.


Ack


^ permalink raw reply	[flat|nested] 38+ messages in thread

* Re: [PATCH v9 01/15] leds: multicolor: Add sysfs interface definition
  2019-09-25 17:46 ` [PATCH v9 01/15] leds: multicolor: Add sysfs interface definition Dan Murphy
@ 2019-09-25 20:58   ` Jacek Anaszewski
  2019-09-26 11:10   ` Pavel Machek
  1 sibling, 0 replies; 38+ messages in thread
From: Jacek Anaszewski @ 2019-09-25 20:58 UTC (permalink / raw)
  To: Dan Murphy, pavel
  Cc: linux-leds, linux-kernel, linus.walleij, shawnguo, Sascha Hauer,
	Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team,
	Tony Lindgren, Benoît Cousson

Hi Dan,

Thank you for the v9.

This patch should me melded with 5/15.

On 9/25/19 7:46 PM, Dan Murphy wrote:
> Add a documentation of LED Multicolor LED class specific
> sysfs attributes.
> 
> Add multicolor framework class documentation describing the
> usage of the files created.
> 
> Signed-off-by: Dan Murphy <dmurphy@ti.com>
> ---
>  .../ABI/testing/sysfs-class-led-multicolor    | 35 +++++++
>  Documentation/leds/index.rst                  |  1 +
>  Documentation/leds/leds-class-multicolor.rst  | 96 +++++++++++++++++++
>  3 files changed, 132 insertions(+)
>  create mode 100644 Documentation/ABI/testing/sysfs-class-led-multicolor
>  create mode 100644 Documentation/leds/leds-class-multicolor.rst
> 
> diff --git a/Documentation/ABI/testing/sysfs-class-led-multicolor b/Documentation/ABI/testing/sysfs-class-led-multicolor
> new file mode 100644
> index 000000000000..65cb43de26e6
> --- /dev/null
> +++ b/Documentation/ABI/testing/sysfs-class-led-multicolor
> @@ -0,0 +1,35 @@
> +What:		/sys/class/leds/<led>/brightness
> +Date:		Sept 2019
> +KernelVersion:	5.5
> +Contact:	Dan Murphy <dmurphy@ti.com>
> +Description:	read/write
> +		Writing to this file will update all LEDs within the group to a
> +		calculated percentage of what each color LED intensity is set
> +		to. The percentage is calculated via the equation below:
> +
> +		led_brightness = brightness * <color>_intensity/<color>_max_intensity
> +
> +		For additional details please refer to
> +		Documentation/leds/leds-class-multicolor.rst.
> +
> +		The value of the color is from 0 to
> +		/sys/class/leds/<led>/max_brightness.
> +
> +What:		/sys/class/leds/<led>/colors/<color>_intensity
> +Date:		Sept 2019
> +KernelVersion:	5.5
> +Contact:	Dan Murphy <dmurphy@ti.com>
> +Description:	read/write
> +		The <color>_intensity file is created based on the color
> +		defined by the registrar of the class.
> +		There is one file per color presented.
> +
> +		The value of the color is from 0 to
> +		/sys/class/leds/<led>/colors/<color>_max_intensity.
> +
> +What:		/sys/class/leds/<led>/colors/<color>_max_intensity
> +Date:		Sept 2019
> +KernelVersion:	5.5
> +Contact:	Dan Murphy <dmurphy@ti.com>
> +Description:	read only
> +		Maximum intensity level for the LED color.
> diff --git a/Documentation/leds/index.rst b/Documentation/leds/index.rst
> index 060f4e485897..bc70c6aa7138 100644
> --- a/Documentation/leds/index.rst
> +++ b/Documentation/leds/index.rst
> @@ -9,6 +9,7 @@ LEDs
>  
>     leds-class
>     leds-class-flash
> +   leds-class-multicolor
>     ledtrig-oneshot
>     ledtrig-transient
>     ledtrig-usbport
> diff --git a/Documentation/leds/leds-class-multicolor.rst b/Documentation/leds/leds-class-multicolor.rst
> new file mode 100644
> index 000000000000..87a1588d7619
> --- /dev/null
> +++ b/Documentation/leds/leds-class-multicolor.rst
> @@ -0,0 +1,96 @@
> +====================================
> +Multi Color LED handling under Linux
> +====================================
> +
> +Description
> +===========
> +The multi color class groups monochrome LEDs and allows controlling two
> +aspects of the final combined color: hue and lightness. The former is
> +controlled via <color>_intensity files and the latter is controlled
> +via brightness file.
> +
> +For more details on hue and lightness notions please refer to
> +https://en.wikipedia.org/wiki/CIECAM02.
> +
> +Note that intensity files only cache the written value and the actual
> +change of hardware state occurs upon writing brightness file. This
> +allows for changing many factors of the perceived color in a virtually
> +unnoticeable way for the human observer.
> +
> +Multicolor Class Control
> +========================
> +The multicolor class presents the LED groups under a directory called "colors".
> +This directory is a child under the LED parent node created by the led_class
> +framework.  The led_class framework is documented in led-class.rst within this
> +documentation directory.
> +
> +Each colored LED will have two files created under the colors directory
> +<color>_intensity and <color>_max_intensity. These files will contain
> +one of LED_COLOR_ID_* definitions from the header
> +include/dt-bindings/leds/common.h.
> +
> +Directory Layout Example
> +========================
> +root:/sys/class/leds/rgb:grouped_leds# ls -lR colors/
> +-rw-rwxr-- 1 root root 4096 Jul 7 03:10 red_max_intensity
> +--w--wx-w- 1 root root 4096 Jul 7 03:10 red_intensity
> +-rw-rwxr-- 1 root root 4096 Jul 7 03:10 green_max_intensity
> +--w--wx-w- 1 root root 4096 Jul 7 03:10 green_intensity
> +-rw-rwxr-- 1 root root 4096 Jul 7 03:10 blue_max_intensity
> +--w--wx-w- 1 root root 4096 Jul 7 03:10 blue_intensity
> +
> +Multicolor Class Brightness Control
> +===================================
> +The multiclor class framework will calculate each monochrome LEDs intensity.
> +
> +The brightness level for each LED is calculated based on the color LED
> +intensity setting divided by the color LED max intensity setting multiplied by
> +the requested brightness.
> +
> +led_brightness = brightness * <color>_intensity/<color>_max_intensity
> +
> +Example:
> +Three LEDs are present in the group as defined in "Directory Layout Example"
> +within this document.
> +
> +A user first writes the color LED brightness file with the brightness level that
> +is necessary to achieve a blueish violet output from the RGB LED group.
> +
> +echo 138 > /sys/class/leds/rgb:grouped_leds/red_intensity
> +echo 43 > /sys/class/leds/rgb:grouped_leds/green_intensity
> +echo 226 > /sys/class/leds/rgb:grouped_leds/blue_intensity
> +
> +red -
> +	intensity = 138
> +	max_intensity = 255
> +green -
> +	intensity = 43
> +	max_intensity = 255
> +blue -
> +	intensity = 226
> +	max_intensity = 255
> +
> +The user can control the brightness of that RGB group by writing the parent
> +'brightness' control.  Assuming a parent max_brightness of 255 the user may want
> +to dim the LED color group to half.  The user would write a value of 128 to the
> +parent brightness file then the values written to each LED will be adjusted
> +base on this value
> +
> +cat /sys/class/leds/rgb:grouped_leds/max_brightness
> +255
> +echo 128 > /sys/class/leds/rgb:grouped_leds/brightness
> +
> +adjusted_red_value = 128 * 138/255 = 69
> +adjusted_green_value = 128 * 43/255 = 21
> +adjusted_blue_value = 128 * 226/255 = 113
> +
> +Reading the parent brightness file will return the current brightness value of
> +the color LED group.
> +
> +cat /sys/class/leds/rgb:grouped_leds/max_brightness
> +255
> +
> +echo 128 > /sys/class/leds/rgb:grouped_leds/brightness
> +
> +cat /sys/class/leds/rgb:grouped_leds/brightness
> +128
> 

-- 
Best regards,
Jacek Anaszewski

^ permalink raw reply	[flat|nested] 38+ messages in thread

* Re: [PATCH v9 05/15] leds: multicolor: Introduce a multicolor class definition
  2019-09-25 17:46 ` [PATCH v9 05/15] leds: multicolor: Introduce a multicolor class definition Dan Murphy
@ 2019-09-25 21:12   ` Jacek Anaszewski
  2019-09-26 11:52     ` Dan Murphy
  0 siblings, 1 reply; 38+ messages in thread
From: Jacek Anaszewski @ 2019-09-25 21:12 UTC (permalink / raw)
  To: Dan Murphy, pavel; +Cc: linux-leds, linux-kernel

Dan,

On 9/25/19 7:46 PM, Dan Murphy wrote:
> Introduce a multicolor class that groups colored LEDs
> within a LED node.
> 
> The multi color class groups monochrome LEDs and allows controlling two
> aspects of the final combined color: hue and lightness. The former is
> controlled via <color>_intensity files and the latter is controlled
> via brightness file.
> 
> Signed-off-by: Dan Murphy <dmurphy@ti.com>
> ---
>  drivers/leds/Kconfig                 |  10 ++
>  drivers/leds/Makefile                |   1 +
>  drivers/leds/led-class-multicolor.c  | 220 +++++++++++++++++++++++++++
>  include/linux/led-class-multicolor.h |  74 +++++++++
>  4 files changed, 305 insertions(+)
>  create mode 100644 drivers/leds/led-class-multicolor.c
>  create mode 100644 include/linux/led-class-multicolor.h
> 
> diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
> index 6e7703fd03d0..cfb1ebb6517f 100644
> --- a/drivers/leds/Kconfig
> +++ b/drivers/leds/Kconfig
> @@ -30,6 +30,16 @@ config LEDS_CLASS_FLASH
>  	  for the flash related features of a LED device. It can be built
>  	  as a module.
>  
> +config LEDS_CLASS_MULTI_COLOR
> +	tristate "LED Mulit Color LED Class Support"
> +	depends on LEDS_CLASS
> +	help
> +	  This option enables the multicolor LED sysfs class in /sys/class/leds.
> +	  It wraps LED class and adds multicolor LED specific sysfs attributes
> +	  and kernel internal API to it. You'll need this to provide support
> +	  for multicolor LEDs that are grouped together. This class is not
> +	  intended for single color LEDs. It can be built as a module.
> +
>  config LEDS_BRIGHTNESS_HW_CHANGED
>  	bool "LED Class brightness_hw_changed attribute support"
>  	depends on LEDS_CLASS
> diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
> index 2da39e896ce8..841038cfe35b 100644
> --- a/drivers/leds/Makefile
> +++ b/drivers/leds/Makefile
> @@ -4,6 +4,7 @@
>  obj-$(CONFIG_NEW_LEDS)			+= led-core.o
>  obj-$(CONFIG_LEDS_CLASS)		+= led-class.o
>  obj-$(CONFIG_LEDS_CLASS_FLASH)		+= led-class-flash.o
> +obj-$(CONFIG_LEDS_CLASS_MULTI_COLOR)	+= led-class-multicolor.o
>  obj-$(CONFIG_LEDS_TRIGGERS)		+= led-triggers.o
>  
>  # LED Platform Drivers
> diff --git a/drivers/leds/led-class-multicolor.c b/drivers/leds/led-class-multicolor.c
> new file mode 100644
> index 000000000000..25371bd9a860
> --- /dev/null
> +++ b/drivers/leds/led-class-multicolor.c
> @@ -0,0 +1,220 @@
> +// SPDX-License-Identifier: GPL-2.0
> +// LED Multi Color class interface
> +// Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/
> +
> +#include <linux/device.h>
> +#include <linux/init.h>
> +#include <linux/led-class-multicolor.h>
> +#include <linux/module.h>
> +#include <linux/slab.h>
> +#include <linux/uaccess.h>
> +
> +#include "leds.h"
> +
> +#define INTENSITY_NAME		"_intensity"
> +#define MAX_INTENSITY_NAME	"_max_intensity"
> +
> +void led_mc_calc_brightness(struct led_classdev_mc *mcled_cdev,
> +			    enum led_brightness brightness,
> +			    int brightness_val[])
> +{
> +	struct led_mc_color_entry *priv;
> +	int i = 0;
> +
> +	list_for_each_entry(priv, &mcled_cdev->color_list, list) {

I think we should have some way to let the caller know exact mapping
of brightness_val to color_id. Possibly LED mc core should provide
a helper to get color_id by color entry index.

But this remark is actually more relevant to the place of calling.
I'll try to propose something there.

And regarding brightness_val name - how about:

s/brightness_val/brightness_component/ ?


> +		brightness_val[i] = brightness *
> +				    priv->intensity / priv->max_intensity;
> +		i++;
> +	}
> +}
> +EXPORT_SYMBOL_GPL(led_mc_calc_brightness);
> +
> +static ssize_t intensity_store(struct device *dev,
> +				struct device_attribute *intensity_attr,
> +				const char *buf, size_t size)
> +{
> +	struct led_mc_color_entry *priv = container_of(intensity_attr,
> +						    struct led_mc_color_entry,
> +						      intensity_attr);
> +	struct led_classdev *led_cdev = priv->mcled_cdev->led_cdev;
> +	unsigned long value;
> +	ssize_t ret;
> +
> +	mutex_lock(&led_cdev->led_access);
> +
> +	ret = kstrtoul(buf, 10, &value);
> +	if (ret)
> +		goto unlock;
> +
> +	if (value > priv->max_intensity) {
> +		ret = -EINVAL;
> +		goto unlock;
> +	}
> +
> +	priv->intensity = value;
> +	ret = size;
> +
> +unlock:
> +	mutex_unlock(&led_cdev->led_access);
> +	return ret;
> +}
> +
> +static ssize_t intensity_show(struct device *dev,
> +			      struct device_attribute *intensity_attr,
> +			      char *buf)
> +{
> +	struct led_mc_color_entry *priv = container_of(intensity_attr,
> +						    struct led_mc_color_entry,
> +						      intensity_attr);
> +
> +	return sprintf(buf, "%d\n", priv->intensity);
> +}
> +
> +static ssize_t max_intensity_show(struct device *dev,
> +				   struct device_attribute *max_intensity_attr,
> +				   char *buf)
> +{
> +	struct led_mc_color_entry *priv = container_of(max_intensity_attr,
> +						    struct led_mc_color_entry,
> +						      max_intensity_attr);
> +
> +	return sprintf(buf, "%d\n", priv->max_intensity);
> +}
> +
> +static struct attribute *led_color_attrs[] = {
> +	NULL,
> +};
> +
> +static struct attribute_group led_color_group = {
> +	.name = "colors",
> +	.attrs = led_color_attrs,
> +};
> +
> +static int led_multicolor_init_color(struct led_classdev_mc *mcled_cdev,
> +				     int color_id, int color_index)
> +{
> +	struct led_classdev *led_cdev = mcled_cdev->led_cdev;
> +	struct led_mc_color_entry *mc_priv;
> +	char *intensity_file_name;
> +	char *max_intensity_file_name;
> +	size_t len;
> +	int ret;
> +
> +	mc_priv = devm_kzalloc(led_cdev->dev, sizeof(*mc_priv), GFP_KERNEL);
> +	if (!mc_priv)
> +		return -ENOMEM;
> +
> +	mc_priv->led_color_id = color_id;
> +	mc_priv->mcled_cdev = mcled_cdev;
> +
> +	sysfs_attr_init(&mc_priv->intensity_attr.attr);
> +	len = strlen(led_colors[color_id]) + strlen(INTENSITY_NAME) + 1;
> +	intensity_file_name = kzalloc(len, GFP_KERNEL);
> +	if (!intensity_file_name)
> +		return -ENOMEM;
> +
> +	snprintf(intensity_file_name, len, "%s%s",
> +		 led_colors[color_id], INTENSITY_NAME);
> +	mc_priv->intensity_attr.attr.name = intensity_file_name;
> +	mc_priv->intensity_attr.attr.mode = 644;

Proper octal value should begin with 0.
But please use combinations of dedicated S_I* definitions
from include/uapi/linux/stat.h.

> +	mc_priv->intensity_attr.store = intensity_store;
> +	mc_priv->intensity_attr.show = intensity_show;
> +	ret = sysfs_add_file_to_group(&led_cdev->dev->kobj,
> +				      &mc_priv->intensity_attr.attr,
> +				      led_color_group.name);
> +	if (ret)
> +		goto intensity_err_out;
> +
> +	sysfs_attr_init(&mc_priv->max_intensity_attr.attr);
> +	len = strlen(led_colors[color_id]) + strlen(MAX_INTENSITY_NAME) + 1;
> +	max_intensity_file_name = kzalloc(len, GFP_KERNEL);
> +	if (!max_intensity_file_name) {
> +		ret = -ENOMEM;
> +		goto intensity_err_out;
> +	}
> +
> +	snprintf(max_intensity_file_name, len, "%s%s",
> +		 led_colors[color_id], MAX_INTENSITY_NAME);
> +	mc_priv->max_intensity_attr.attr.name = max_intensity_file_name;
> +	mc_priv->max_intensity_attr.attr.mode = 444;
> +	mc_priv->max_intensity_attr.show = max_intensity_show;
> +	ret = sysfs_add_file_to_group(&led_cdev->dev->kobj,
> +				      &mc_priv->max_intensity_attr.attr,
> +				      led_color_group.name);
> +	if (ret)
> +		goto max_intensity_err_out;
> +
> +	mc_priv->max_intensity = LED_FULL;
> +	list_add_tail(&mc_priv->list, &mcled_cdev->color_list);
> +
> +max_intensity_err_out:
> +	kfree(max_intensity_file_name);
> +intensity_err_out:
> +	kfree(intensity_file_name);
> +	return ret;
> +}
> +
> +static int led_multicolor_init_color_dir(struct led_classdev_mc *mcled_cdev)
> +{
> +	struct led_classdev *led_cdev = mcled_cdev->led_cdev;
> +	int ret;
> +	int i, color_index = 0;
> +
> +	ret = sysfs_create_group(&led_cdev->dev->kobj, &led_color_group);
> +	if (ret)
> +		return ret;
> +
> +	for (i = 0; i < LED_COLOR_ID_MAX; i++) {
> +		if (test_bit(i, &mcled_cdev->available_colors)) {
> +			ret = led_multicolor_init_color(mcled_cdev, i,
> +							color_index);

color_index is now unused AFAICS.

> +			if (ret)
> +				break;
> +
> +			color_index++;
> +		}
> +	}
> +
> +	return ret;
> +}
> +
> +int led_classdev_multicolor_register_ext(struct device *parent,
> +				     struct led_classdev_mc *mcled_cdev,
> +				     struct led_init_data *init_data)
> +{
> +	struct led_classdev *led_cdev;
> +	int ret;
> +
> +	if (!mcled_cdev)
> +		return -EINVAL;
> +
> +	led_cdev = mcled_cdev->led_cdev;
> +	INIT_LIST_HEAD(&mcled_cdev->color_list);
> +
> +	/* Register led class device */
> +	ret = led_classdev_register_ext(parent, led_cdev, init_data);
> +	if (ret)
> +		return ret;
> +
> +	return led_multicolor_init_color_dir(mcled_cdev);
> +}
> +EXPORT_SYMBOL_GPL(led_classdev_multicolor_register_ext);

Why devm_* versions are missing now?

> +
> +void led_classdev_multicolor_unregister(struct led_classdev_mc *mcled_cdev)
> +{
> +	struct led_mc_color_entry *priv, *next;
> +
> +	if (!mcled_cdev)
> +		return;
> +
> +	list_for_each_entry_safe(priv, next, &mcled_cdev->color_list, list)
> +		list_del(&priv->list);
> +
> +	sysfs_remove_group(&mcled_cdev->led_cdev->dev->kobj, &led_color_group);
> +	led_classdev_unregister(mcled_cdev->led_cdev);
> +}
> +EXPORT_SYMBOL_GPL(led_classdev_multicolor_unregister);
> +
> +MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com>");
> +MODULE_DESCRIPTION("Multi Color LED class interface");
> +MODULE_LICENSE("GPL v2");
> diff --git a/include/linux/led-class-multicolor.h b/include/linux/led-class-multicolor.h
> new file mode 100644
> index 000000000000..280ba5a614b4
> --- /dev/null
> +++ b/include/linux/led-class-multicolor.h
> @@ -0,0 +1,74 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/* LED Multicolor class interface
> + * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/
> + */
> +
> +#ifndef __LINUX_MULTICOLOR_LEDS_H_INCLUDED
> +#define __LINUX_MULTICOLOR_LEDS_H_INCLUDED
> +
> +#include <linux/leds.h>
> +#include <dt-bindings/leds/common.h>
> +
> +struct led_classdev_mc;
> +
> +struct led_mc_color_entry {
> +	struct led_classdev_mc *mcled_cdev;
> +
> +	struct device_attribute max_intensity_attr;
> +	struct device_attribute intensity_attr;
> +
> +	enum led_brightness max_intensity;
> +	enum led_brightness intensity;
> +
> +	struct list_head list;
> +
> +	int led_color_id;
> +};
> +
> +struct led_classdev_mc {
> +	/* led class device */
> +	struct led_classdev *led_cdev;
> +	struct list_head color_list;
> +
> +	unsigned long available_colors;
> +	int num_leds;
> +};
> +
> +static inline struct led_classdev_mc *lcdev_to_mccdev(
> +						struct led_classdev *lcdev)
> +{
> +	return container_of(lcdev, struct led_classdev_mc, led_cdev);
> +}
> +
> +/**
> + * led_classdev_multicolor_register_ext - register a new object of led_classdev
> + *				      class with support for multicolor LEDs
> + * @parent: the multicolor LED to register
> + * @mcled_cdev: the led_classdev_mc structure for this device
> + * @init_data: the LED class Multi color device initialization data
> + *
> + * Returns: 0 on success or negative error value on failure
> + */
> +int led_classdev_multicolor_register_ext(struct device *parent,
> +					    struct led_classdev_mc *mcled_cdev,
> +					    struct led_init_data *init_data);
> +
> +#define led_classdev_multicolor_register(parent, mcled_cdev)		\
> +	led_classdev_multicolor_register_ext(parent, mcled_cdev, NULL)

Please turn it into inline.

> +
> +/**
> + * led_classdev_multicolor_unregister - unregisters an object of led_classdev
> + *					class with support for multicolor LEDs
> + * @mcled_cdev: the multicolor LED to unregister
> + *
> + * Unregister a previously registered via led_classdev_multicolor_register
> + * object
> + */
> +void led_classdev_multicolor_unregister(struct led_classdev_mc *mcled_cdev);
> +
> +/* Calculate brightness for the monochrome LED cluster */
> +void led_mc_calc_brightness(struct led_classdev_mc *mcled_cdev,
> +			    enum led_brightness brightness,
> +			    int brightness_val[]);
> +
> +#endif	/* __LINUX_MULTICOLOR_LEDS_H_INCLUDED */
> 

-- 
Best regards,
Jacek Anaszewski

^ permalink raw reply	[flat|nested] 38+ messages in thread

* Re: [PATCH v9 07/15] leds: lp50xx: Add the LP50XX family of the RGB LED driver
  2019-09-25 17:46 ` [PATCH v9 07/15] leds: lp50xx: Add the LP50XX family of the RGB LED driver Dan Murphy
@ 2019-09-25 21:27   ` Jacek Anaszewski
  2019-09-26 11:59     ` Dan Murphy
  0 siblings, 1 reply; 38+ messages in thread
From: Jacek Anaszewski @ 2019-09-25 21:27 UTC (permalink / raw)
  To: Dan Murphy, pavel; +Cc: linux-leds, linux-kernel

Dan,

On 9/25/19 7:46 PM, Dan Murphy wrote:
> Introduce the LP5036/30/24/18/12/9 RGB LED driver.
> The difference in these parts are the number of
> LED outputs where the:
> 
> LP5036 can control 36 LEDs
> LP5030 can control 30 LEDs
> LP5024 can control 24 LEDs
> LP5018 can control 18 LEDs
> LP5012 can control 12 LEDs
> LP5009 can control 9 LEDs
> 
> The device has the ability to group LED output into control banks
> so that multiple LED banks can be controlled with the same mixing and
> brightness.  Inversely the LEDs can also be controlled independently.
> 
> Signed-off-by: Dan Murphy <dmurphy@ti.com>
> ---
>  drivers/leds/Kconfig       |  11 +
>  drivers/leds/Makefile      |   1 +
>  drivers/leds/leds-lp50xx.c | 767 +++++++++++++++++++++++++++++++++++++
>  3 files changed, 779 insertions(+)
>  create mode 100644 drivers/leds/leds-lp50xx.c
> 
> diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
> index cfb1ebb6517f..84f60e35c5ee 100644
> --- a/drivers/leds/Kconfig
> +++ b/drivers/leds/Kconfig
> @@ -363,6 +363,17 @@ config LEDS_LP3952
>  	  To compile this driver as a module, choose M here: the
>  	  module will be called leds-lp3952.
>  
> +config LEDS_LP50XX
> +	tristate "LED Support for TI LP5036/30/24/18/12/9 LED driver chip"
> +	depends on LEDS_CLASS && REGMAP_I2C
> +	depends on LEDS_CLASS_MULTI_COLOR
> +	help
> +	  If you say yes here you get support for the Texas Instruments
> +	  LP5036, LP5030, LP5024, LP5018, LP5012 and LP5009 LED driver.
> +
> +	  To compile this driver as a module, choose M here: the
> +	  module will be called leds-lp50xx.
> +
>  config LEDS_LP55XX_COMMON
>  	tristate "Common Driver for TI/National LP5521/5523/55231/5562/8501"
>  	depends on LEDS_LP5521 || LEDS_LP5523 || LEDS_LP5562 || LEDS_LP8501
> diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
> index 841038cfe35b..7a208a0f7b84 100644
> --- a/drivers/leds/Makefile
> +++ b/drivers/leds/Makefile
> @@ -34,6 +34,7 @@ obj-$(CONFIG_LEDS_GPIO_REGISTER)	+= leds-gpio-register.o
>  obj-$(CONFIG_LEDS_GPIO)			+= leds-gpio.o
>  obj-$(CONFIG_LEDS_LP3944)		+= leds-lp3944.o
>  obj-$(CONFIG_LEDS_LP3952)		+= leds-lp3952.o
> +obj-$(CONFIG_LEDS_LP50XX)		+= leds-lp50xx.o
>  obj-$(CONFIG_LEDS_LP55XX_COMMON)	+= leds-lp55xx-common.o
>  obj-$(CONFIG_LEDS_LP5521)		+= leds-lp5521.o
>  obj-$(CONFIG_LEDS_LP5523)		+= leds-lp5523.o
> diff --git a/drivers/leds/leds-lp50xx.c b/drivers/leds/leds-lp50xx.c
> new file mode 100644
> index 000000000000..a4654cc2bea5
> --- /dev/null
> +++ b/drivers/leds/leds-lp50xx.c
> @@ -0,0 +1,767 @@
> +// SPDX-License-Identifier: GPL-2.0
> +// TI LP50XX LED chip family driver
> +// Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
> +
> +#include <linux/gpio/consumer.h>
> +#include <linux/i2c.h>
> +#include <linux/init.h>
> +#include <linux/leds.h>
> +#include <linux/module.h>
> +#include <linux/mutex.h>
> +#include <linux/of.h>
> +#include <linux/of_gpio.h>
> +#include <linux/regmap.h>
> +#include <linux/regulator/consumer.h>
> +#include <linux/slab.h>
> +#include <uapi/linux/uleds.h>
> +
> +#include <linux/led-class-multicolor.h>
> +
> +#define LP50XX_DEV_CFG0		0x00
> +#define LP50XX_DEV_CFG1		0x01
> +#define LP50XX_LED_CFG0		0x02
> +
> +/* LP5009 and LP5012 registers */
> +#define LP5012_BNK_BRT		0x03
> +#define LP5012_BNKA_CLR		0x04
> +#define LP5012_BNKB_CLR		0x05
> +#define LP5012_BNKC_CLR		0x06
> +#define LP5012_LED0_BRT		0x07
> +#define LP5012_LED1_BRT		0x08
> +#define LP5012_LED2_BRT		0x09
> +#define LP5012_LED3_BRT		0x0a
> +#define LP5012_OUT0_CLR		0x0b
> +#define LP5012_OUT1_CLR		0x0c
> +#define LP5012_OUT2_CLR		0x0d
> +#define LP5012_OUT3_CLR		0x0e
> +#define LP5012_OUT4_CLR		0x0f
> +#define LP5012_OUT5_CLR		0x10
> +#define LP5012_OUT6_CLR		0x11
> +#define LP5012_OUT7_CLR		0x12
> +#define LP5012_OUT8_CLR		0x13
> +#define LP5012_OUT9_CLR		0x14
> +#define LP5012_OUT10_CLR	0x15
> +#define LP5012_OUT11_CLR	0x16
> +#define LP5012_RESET		0x17
> +
> +/* LP5018 and LP5024 registers */
> +#define LP5024_BNK_BRT		0x03
> +#define LP5024_BNKA_CLR		0x04
> +#define LP5024_BNKB_CLR		0x05
> +#define LP5024_BNKC_CLR		0x06
> +#define LP5024_LED0_BRT		0x07
> +#define LP5024_LED1_BRT		0x08
> +#define LP5024_LED2_BRT		0x09
> +#define LP5024_LED3_BRT		0x0a
> +#define LP5024_LED4_BRT		0x0b
> +#define LP5024_LED5_BRT		0x0c
> +#define LP5024_LED6_BRT		0x0d
> +#define LP5024_LED7_BRT		0x0e
> +
> +#define LP5024_OUT0_CLR		0x0f
> +#define LP5024_OUT1_CLR		0x10
> +#define LP5024_OUT2_CLR		0x11
> +#define LP5024_OUT3_CLR		0x12
> +#define LP5024_OUT4_CLR		0x13
> +#define LP5024_OUT5_CLR		0x14
> +#define LP5024_OUT6_CLR		0x15
> +#define LP5024_OUT7_CLR		0x16
> +#define LP5024_OUT8_CLR		0x17
> +#define LP5024_OUT9_CLR		0x18
> +#define LP5024_OUT10_CLR	0x19
> +#define LP5024_OUT11_CLR	0x1a
> +#define LP5024_OUT12_CLR	0x1b
> +#define LP5024_OUT13_CLR	0x1c
> +#define LP5024_OUT14_CLR	0x1d
> +#define LP5024_OUT15_CLR	0x1e
> +#define LP5024_OUT16_CLR	0x1f
> +#define LP5024_OUT17_CLR	0x20
> +#define LP5024_OUT18_CLR	0x21
> +#define LP5024_OUT19_CLR	0x22
> +#define LP5024_OUT20_CLR	0x23
> +#define LP5024_OUT21_CLR	0x24
> +#define LP5024_OUT22_CLR	0x25
> +#define LP5024_OUT23_CLR	0x26
> +#define LP5024_RESET		0x27
> +
> +/* LP5030 and LP5036 registers */
> +#define LP5036_LED_CFG1		0x03
> +#define LP5036_BNK_BRT		0x04
> +#define LP5036_BNKA_CLR		0x05
> +#define LP5036_BNKB_CLR		0x06
> +#define LP5036_BNKC_CLR		0x07
> +#define LP5036_LED0_BRT		0x08
> +#define LP5036_LED1_BRT		0x09
> +#define LP5036_LED2_BRT		0x0a
> +#define LP5036_LED3_BRT		0x0b
> +#define LP5036_LED4_BRT		0x0c
> +#define LP5036_LED5_BRT		0x0d
> +#define LP5036_LED6_BRT		0x0e
> +#define LP5036_LED7_BRT		0x0f
> +#define LP5036_LED8_BRT		0x10
> +#define LP5036_LED9_BRT		0x11
> +#define LP5036_LED10_BRT	0x12
> +#define LP5036_LED11_BRT	0x13
> +
> +#define LP5036_OUT0_CLR		0x14
> +#define LP5036_OUT1_CLR		0x15
> +#define LP5036_OUT2_CLR		0x16
> +#define LP5036_OUT3_CLR		0x17
> +#define LP5036_OUT4_CLR		0x18
> +#define LP5036_OUT5_CLR		0x19
> +#define LP5036_OUT6_CLR		0x1a
> +#define LP5036_OUT7_CLR		0x1b
> +#define LP5036_OUT8_CLR		0x1c
> +#define LP5036_OUT9_CLR		0x1d
> +#define LP5036_OUT10_CLR	0x1e
> +#define LP5036_OUT11_CLR	0x1f
> +#define LP5036_OUT12_CLR	0x20
> +#define LP5036_OUT13_CLR	0x21
> +#define LP5036_OUT14_CLR	0x22
> +#define LP5036_OUT15_CLR	0x23
> +#define LP5036_OUT16_CLR	0x24
> +#define LP5036_OUT17_CLR	0x25
> +#define LP5036_OUT18_CLR	0x26
> +#define LP5036_OUT19_CLR	0x27
> +#define LP5036_OUT20_CLR	0x28
> +#define LP5036_OUT21_CLR	0x29
> +#define LP5036_OUT22_CLR	0x2a
> +#define LP5036_OUT23_CLR	0x2b
> +#define LP5036_OUT24_CLR	0x2c
> +#define LP5036_OUT25_CLR	0x2d
> +#define LP5036_OUT26_CLR	0x2e
> +#define LP5036_OUT27_CLR	0x2f
> +#define LP5036_OUT28_CLR	0x30
> +#define LP5036_OUT29_CLR	0x31
> +#define LP5036_OUT30_CLR	0x32
> +#define LP5036_OUT31_CLR	0x33
> +#define LP5036_OUT32_CLR	0x34
> +#define LP5036_OUT33_CLR	0x35
> +#define LP5036_OUT34_CLR	0x36
> +#define LP5036_OUT35_CLR	0x37
> +#define LP5036_RESET		0x38
> +
> +#define LP50XX_SW_RESET		0xff
> +#define LP50XX_CHIP_EN		BIT(6)
> +
> +/* There are 3 LED outputs per bank */
> +#define LP50XX_LEDS_PER_MODULE	3
> +
> +#define LP5009_MAX_LED_MODULES	2
> +#define LP5012_MAX_LED_MODULES	4
> +#define LP5018_MAX_LED_MODULES	6
> +#define LP5024_MAX_LED_MODULES	8
> +#define LP5030_MAX_LED_MODULES	10
> +#define LP5036_MAX_LED_MODULES	12
> +
> +#define LP5009_MAX_LEDS	(LP5009_MAX_LED_MODULES * LP50XX_LEDS_PER_MODULE)
> +#define LP5012_MAX_LEDS	(LP5012_MAX_LED_MODULES * LP50XX_LEDS_PER_MODULE)
> +#define LP5018_MAX_LEDS	(LP5018_MAX_LED_MODULES * LP50XX_LEDS_PER_MODULE)
> +#define LP5024_MAX_LEDS	(LP5024_MAX_LED_MODULES * LP50XX_LEDS_PER_MODULE)
> +#define LP5030_MAX_LEDS	(LP5030_MAX_LED_MODULES * LP50XX_LEDS_PER_MODULE)
> +#define LP5036_MAX_LEDS	(LP5036_MAX_LED_MODULES * LP50XX_LEDS_PER_MODULE)
> +
> +struct lp50xx_led {
> +	struct led_classdev led_dev;
> +	struct led_classdev_mc mc_cdev;
> +	struct lp50xx *priv;
> +	unsigned long bank_modules;
> +	int led_intensity[LP50XX_LEDS_PER_MODULE];
> +	u8 ctrl_bank_enabled;
> +	int led_number;
> +};
> +
> +/**
> + * struct lp50xx -
> + * @enable_gpio: hardware enable gpio
> + * @regulator: LED supply regulator pointer
> + * @client: pointer to the I2C client
> + * @regmap: device register map
> + * @dev: pointer to the devices device struct
> + * @lock: lock for reading/writing the device
> + * @chip_info: chip specific information (ie num_leds)
> + * @num_of_banked_leds: holds the number of banked LEDs
> + * @leds: array of LED strings
> + */
> +struct lp50xx {
> +	struct gpio_desc *enable_gpio;
> +	struct regulator *regulator;
> +	struct i2c_client *client;
> +	struct regmap *regmap;
> +	struct device *dev;
> +	struct mutex lock;
> +	const struct lp50xx_chip_info *chip_info;
> +	int num_of_banked_leds;
> +
> +	/* This needs to be at the end of the struct */
> +	struct lp50xx_led leds[];
> +};
> +
> +static const struct reg_default lp5012_reg_defs[] = {
> +	{LP50XX_DEV_CFG0, 0x0},
> +	{LP50XX_DEV_CFG1, 0x3c},
> +	{LP50XX_LED_CFG0, 0x0},
> +	{LP5012_BNK_BRT, 0xff},
> +	{LP5012_BNKA_CLR, 0x0f},
> +	{LP5012_BNKB_CLR, 0x0f},
> +	{LP5012_BNKC_CLR, 0x0f},
> +	{LP5012_LED0_BRT, 0x0f},
> +	{LP5012_LED1_BRT, 0xff},
> +	{LP5012_LED2_BRT, 0xff},
> +	{LP5012_LED3_BRT, 0xff},
> +	{LP5012_OUT0_CLR, 0x0f},
> +	{LP5012_OUT1_CLR, 0x00},
> +	{LP5012_OUT2_CLR, 0x00},
> +	{LP5012_OUT3_CLR, 0x00},
> +	{LP5012_OUT4_CLR, 0x00},
> +	{LP5012_OUT5_CLR, 0x00},
> +	{LP5012_OUT6_CLR, 0x00},
> +	{LP5012_OUT7_CLR, 0x00},
> +	{LP5012_OUT8_CLR, 0x00},
> +	{LP5012_OUT9_CLR, 0x00},
> +	{LP5012_OUT10_CLR, 0x00},
> +	{LP5012_OUT11_CLR, 0x00},
> +	{LP5012_RESET, 0x00}
> +};
> +
> +static const struct reg_default lp5024_reg_defs[] = {
> +	{LP50XX_DEV_CFG0, 0x0},
> +	{LP50XX_DEV_CFG1, 0x3c},
> +	{LP50XX_LED_CFG0, 0x0},
> +	{LP5024_BNK_BRT, 0xff},
> +	{LP5024_BNKA_CLR, 0x0f},
> +	{LP5024_BNKB_CLR, 0x0f},
> +	{LP5024_BNKC_CLR, 0x0f},
> +	{LP5024_LED0_BRT, 0x0f},
> +	{LP5024_LED1_BRT, 0xff},
> +	{LP5024_LED2_BRT, 0xff},
> +	{LP5024_LED3_BRT, 0xff},
> +	{LP5024_LED4_BRT, 0xff},
> +	{LP5024_LED5_BRT, 0xff},
> +	{LP5024_LED6_BRT, 0xff},
> +	{LP5024_LED7_BRT, 0xff},
> +	{LP5024_OUT0_CLR, 0x0f},
> +	{LP5024_OUT1_CLR, 0x00},
> +	{LP5024_OUT2_CLR, 0x00},
> +	{LP5024_OUT3_CLR, 0x00},
> +	{LP5024_OUT4_CLR, 0x00},
> +	{LP5024_OUT5_CLR, 0x00},
> +	{LP5024_OUT6_CLR, 0x00},
> +	{LP5024_OUT7_CLR, 0x00},
> +	{LP5024_OUT8_CLR, 0x00},
> +	{LP5024_OUT9_CLR, 0x00},
> +	{LP5024_OUT10_CLR, 0x00},
> +	{LP5024_OUT11_CLR, 0x00},
> +	{LP5024_OUT12_CLR, 0x00},
> +	{LP5024_OUT13_CLR, 0x00},
> +	{LP5024_OUT14_CLR, 0x00},
> +	{LP5024_OUT15_CLR, 0x00},
> +	{LP5024_OUT16_CLR, 0x00},
> +	{LP5024_OUT17_CLR, 0x00},
> +	{LP5024_OUT18_CLR, 0x00},
> +	{LP5024_OUT19_CLR, 0x00},
> +	{LP5024_OUT20_CLR, 0x00},
> +	{LP5024_OUT21_CLR, 0x00},
> +	{LP5024_OUT22_CLR, 0x00},
> +	{LP5024_OUT23_CLR, 0x00},
> +	{LP5024_RESET, 0x00}
> +};
> +
> +static const struct reg_default lp5036_reg_defs[] = {
> +	{LP50XX_DEV_CFG0, 0x0},
> +	{LP50XX_DEV_CFG1, 0x3c},
> +	{LP50XX_LED_CFG0, 0x0},
> +	{LP5036_LED_CFG1, 0x0},
> +	{LP5036_BNK_BRT, 0xff},
> +	{LP5036_BNKA_CLR, 0x0f},
> +	{LP5036_BNKB_CLR, 0x0f},
> +	{LP5036_BNKC_CLR, 0x0f},
> +	{LP5036_LED0_BRT, 0x0f},
> +	{LP5036_LED1_BRT, 0xff},
> +	{LP5036_LED2_BRT, 0xff},
> +	{LP5036_LED3_BRT, 0xff},
> +	{LP5036_LED4_BRT, 0xff},
> +	{LP5036_LED5_BRT, 0xff},
> +	{LP5036_LED6_BRT, 0xff},
> +	{LP5036_LED7_BRT, 0xff},
> +	{LP5036_OUT0_CLR, 0x0f},
> +	{LP5036_OUT1_CLR, 0x00},
> +	{LP5036_OUT2_CLR, 0x00},
> +	{LP5036_OUT3_CLR, 0x00},
> +	{LP5036_OUT4_CLR, 0x00},
> +	{LP5036_OUT5_CLR, 0x00},
> +	{LP5036_OUT6_CLR, 0x00},
> +	{LP5036_OUT7_CLR, 0x00},
> +	{LP5036_OUT8_CLR, 0x00},
> +	{LP5036_OUT9_CLR, 0x00},
> +	{LP5036_OUT10_CLR, 0x00},
> +	{LP5036_OUT11_CLR, 0x00},
> +	{LP5036_OUT12_CLR, 0x00},
> +	{LP5036_OUT13_CLR, 0x00},
> +	{LP5036_OUT14_CLR, 0x00},
> +	{LP5036_OUT15_CLR, 0x00},
> +	{LP5036_OUT16_CLR, 0x00},
> +	{LP5036_OUT17_CLR, 0x00},
> +	{LP5036_OUT18_CLR, 0x00},
> +	{LP5036_OUT19_CLR, 0x00},
> +	{LP5036_OUT20_CLR, 0x00},
> +	{LP5036_OUT21_CLR, 0x00},
> +	{LP5036_OUT22_CLR, 0x00},
> +	{LP5036_OUT23_CLR, 0x00},
> +	{LP5036_OUT24_CLR, 0x00},
> +	{LP5036_OUT25_CLR, 0x00},
> +	{LP5036_OUT26_CLR, 0x00},
> +	{LP5036_OUT27_CLR, 0x00},
> +	{LP5036_OUT28_CLR, 0x00},
> +	{LP5036_OUT29_CLR, 0x00},
> +	{LP5036_OUT30_CLR, 0x00},
> +	{LP5036_OUT31_CLR, 0x00},
> +	{LP5036_OUT32_CLR, 0x00},
> +	{LP5036_OUT33_CLR, 0x00},
> +	{LP5036_OUT34_CLR, 0x00},
> +	{LP5036_OUT35_CLR, 0x00},
> +	{LP5036_RESET, 0x00}
> +};
> +
> +static const struct regmap_config lp5012_regmap_config = {
> +	.reg_bits = 8,
> +	.val_bits = 8,
> +
> +	.max_register = LP5012_RESET,
> +	.reg_defaults = lp5012_reg_defs,
> +	.num_reg_defaults = ARRAY_SIZE(lp5012_reg_defs),
> +	.cache_type = REGCACHE_RBTREE,
> +};
> +
> +static const struct regmap_config lp5024_regmap_config = {
> +	.reg_bits = 8,
> +	.val_bits = 8,
> +
> +	.max_register = LP5024_RESET,
> +	.reg_defaults = lp5024_reg_defs,
> +	.num_reg_defaults = ARRAY_SIZE(lp5024_reg_defs),
> +	.cache_type = REGCACHE_RBTREE,
> +};
> +
> +static const struct regmap_config lp5036_regmap_config = {
> +	.reg_bits = 8,
> +	.val_bits = 8,
> +
> +	.max_register = LP5036_RESET,
> +	.reg_defaults = lp5036_reg_defs,
> +	.num_reg_defaults = ARRAY_SIZE(lp5036_reg_defs),
> +	.cache_type = REGCACHE_RBTREE,
> +};
> +
> +enum lp50xx_model {
> +	LP5009,
> +	LP5012,
> +	LP5018,
> +	LP5024,
> +	LP5030,
> +	LP5036,
> +};
> +
> +/*
> + * struct lp50xx_chip_info -
> + * @num_leds: number of LED outputs available on the device
> + * @led_brightness0_reg: first brightness register of the device
> + * @mix_out0_reg: first color mix register of the device
> + * @bank_brt_reg: bank brightness register
> + * @bank_mix_reg: color mix register
> + * @reset_reg: device reset register
> + */
> +struct lp50xx_chip_info {
> +	struct regmap_config lp50xx_regmap_config;
> +	u8 num_leds;
> +	u8 led_brightness0_reg;
> +	u8 mix_out0_reg;
> +	u8 bank_brt_reg;
> +	u8 bank_mix_reg;
> +	u8 reset_reg;
> +};
> +
> +static const struct lp50xx_chip_info lp50xx_chip_info_tbl[] = {
> +	[LP5009] = {
> +		.num_leds = LP5009_MAX_LEDS,
> +		.led_brightness0_reg = LP5012_LED0_BRT,
> +		.mix_out0_reg = LP5012_OUT0_CLR,
> +		.bank_brt_reg = LP5012_BNK_BRT,
> +		.bank_mix_reg = LP5012_BNKA_CLR,
> +		.reset_reg = LP5012_RESET,
> +		.lp50xx_regmap_config = lp5012_regmap_config,
> +	},
> +	[LP5012] = {
> +		.num_leds = LP5012_MAX_LEDS,
> +		.led_brightness0_reg = LP5012_LED0_BRT,
> +		.mix_out0_reg = LP5012_OUT0_CLR,
> +		.bank_brt_reg = LP5012_BNK_BRT,
> +		.bank_mix_reg = LP5012_BNKA_CLR,
> +		.reset_reg = LP5012_RESET,
> +		.lp50xx_regmap_config = lp5012_regmap_config,
> +	},
> +	[LP5018] = {
> +		.num_leds = LP5018_MAX_LEDS,
> +		.led_brightness0_reg = LP5024_LED0_BRT,
> +		.mix_out0_reg = LP5024_OUT0_CLR,
> +		.bank_brt_reg = LP5024_BNK_BRT,
> +		.bank_mix_reg = LP5024_BNKA_CLR,
> +		.reset_reg = LP5024_RESET,
> +		.lp50xx_regmap_config = lp5024_regmap_config,
> +	},
> +	[LP5024] = {
> +		.num_leds = LP5024_MAX_LEDS,
> +		.led_brightness0_reg = LP5024_LED0_BRT,
> +		.mix_out0_reg = LP5024_OUT0_CLR,
> +		.bank_brt_reg = LP5024_BNK_BRT,
> +		.bank_mix_reg = LP5024_BNKA_CLR,
> +		.reset_reg = LP5024_RESET,
> +		.lp50xx_regmap_config = lp5024_regmap_config,
> +	},
> +	[LP5030] = {
> +		.num_leds = LP5030_MAX_LEDS,
> +		.led_brightness0_reg = LP5036_LED0_BRT,
> +		.mix_out0_reg = LP5036_OUT0_CLR,
> +		.bank_brt_reg = LP5036_BNK_BRT,
> +		.bank_mix_reg = LP5036_BNKA_CLR,
> +		.reset_reg = LP5036_RESET,
> +		.lp50xx_regmap_config = lp5036_regmap_config,
> +	},
> +	[LP5036] = {
> +		.num_leds = LP5036_MAX_LEDS,
> +		.led_brightness0_reg = LP5036_LED0_BRT,
> +		.mix_out0_reg = LP5036_OUT0_CLR,
> +		.bank_brt_reg = LP5036_BNK_BRT,
> +		.bank_mix_reg = LP5036_BNKA_CLR,
> +		.reset_reg = LP5036_RESET,
> +		.lp50xx_regmap_config = lp5036_regmap_config,
> +	},
> +};
> +
> +static int lp50xx_brightness_set(struct led_classdev *cdev,
> +			     enum led_brightness brightness)
> +{
> +	struct lp50xx_led *led = container_of(cdev, struct lp50xx_led, led_dev);
> +	const struct lp50xx_chip_info *led_chip = led->priv->chip_info;
> +	struct led_mc_color_entry *color_data;
> +	u8 led_offset, reg_val, reg_color_offset;
> +	int ret = 0;
> +
> +	mutex_lock(&led->priv->lock);
> +
> +	if (led->ctrl_bank_enabled)
> +		reg_val = led_chip->bank_brt_reg;
> +	else
> +		reg_val = led_chip->led_brightness0_reg +
> +			  led->led_number;
> +
> +	ret = regmap_write(led->priv->regmap, reg_val, brightness);
> +	if (ret) {
> +		dev_err(&led->priv->client->dev,
> +			"Cannot write brightness value %d\n", ret);
> +		goto out;
> +	}
> +
> +	list_for_each_entry(color_data, &led->mc_cdev.color_list, list) {
> +		if (color_data->led_color_id == LED_COLOR_ID_RED)
> +			reg_color_offset = 0;
> +		else if (color_data->led_color_id == LED_COLOR_ID_GREEN)
> +			reg_color_offset = 1;
> +		else if (color_data->led_color_id == LED_COLOR_ID_BLUE)
> +			reg_color_offset = 2;
> +		else
> +			continue;

This else case is quite erroneous. Sheer continue is just ignoring
serious problem. I'd log the problem and return -EINVAL.

Also, you could have a macro for mapping color_id to offset.

> +
> +		if (led->ctrl_bank_enabled) {
> +			reg_val = led_chip->bank_mix_reg + reg_color_offset;
> +		} else {
> +			led_offset = (led->led_number * 3)  + reg_color_offset;
> +			reg_val = led_chip->mix_out0_reg + led_offset;
> +		}
> +
> +		ret = regmap_write(led->priv->regmap, reg_val,
> +				   color_data->intensity);
> +		if (ret) {
> +			dev_err(&led->priv->client->dev,
> +				"Cannot write intensity value %d\n", ret);
> +			goto out;
> +		}
> +	}
> +out:
> +	mutex_unlock(&led->priv->lock);
> +	return ret;
> +}
> +
> +static enum led_brightness lp50xx_brightness_get(struct led_classdev *cdev)
> +{
> +	struct lp50xx_led *led = container_of(cdev, struct lp50xx_led, led_dev);
> +	const struct lp50xx_chip_info *led_chip = led->priv->chip_info;
> +	unsigned int brt_val;
> +	u8 reg_val;
> +	int ret;
> +
> +	mutex_lock(&led->priv->lock);
> +
> +	if (led->ctrl_bank_enabled)
> +		reg_val = led_chip->bank_brt_reg;
> +	else
> +		reg_val = led_chip->led_brightness0_reg + led->led_number;
> +
> +	ret = regmap_read(led->priv->regmap, reg_val, &brt_val);
> +
> +	mutex_unlock(&led->priv->lock);
> +
> +	return brt_val;
> +}
> +
> +static int lp50xx_set_banks(struct lp50xx *priv, u32 led_banks[])
> +{
> +	u8 led_config_lo, led_config_hi;
> +	u32 bank_enable_mask = 0;
> +	int ret;
> +	int i;
> +
> +	for (i = 0; i < priv->chip_info->num_leds; i++)
> +		bank_enable_mask |= (1 << led_banks[i]);
> +
> +	led_config_lo = (u8)(bank_enable_mask & 0xff);
> +	led_config_hi = (u8)(bank_enable_mask >> 8) & 0xff;
> +
> +	ret = regmap_write(priv->regmap, LP50XX_LED_CFG0, led_config_lo);
> +	if (ret)
> +		return ret;
> +
> +	if (led_config_hi)

Now I think that less questionable would be writing led_config_hi always
for devices that have CFG1 register. IOW write led_config_hi also
when it equals 0.

> +		ret = regmap_write(priv->regmap, LP5036_LED_CFG1,
> +				   led_config_hi);
> +
> +	return ret;
> +}
> +
> +static int lp50xx_reset(struct lp50xx *priv)
> +{
> +	if (priv->enable_gpio)
> +		return gpiod_direction_output(priv->enable_gpio, 1);
> +	else
> +		return regmap_write(priv->regmap, priv->chip_info->reset_reg,
> +				    LP50XX_SW_RESET);
> +}
> +
> +static int lp50xx_enable_disable(struct lp50xx *priv, u8 enable_disable)
> +{
> +	return regmap_write(priv->regmap, LP50XX_DEV_CFG0, enable_disable);
> +}
> +
> +static int lp50xx_probe_dt(struct lp50xx *priv)
> +{
> +	u32 led_banks[LP5036_MAX_LED_MODULES];
> +	struct fwnode_handle *child = NULL;
> +	struct fwnode_handle *led_node = NULL;
> +	struct led_init_data init_data;
> +	struct lp50xx_led *led;
> +	int num_colors;
> +	u32 color_id;
> +	int led_number;
> +	size_t i = 0;
> +	int ret;
> +
> +	priv->enable_gpio = devm_gpiod_get_optional(&priv->client->dev,
> +						   "enable", GPIOD_OUT_LOW);
> +	if (IS_ERR(priv->enable_gpio)) {
> +		ret = PTR_ERR(priv->enable_gpio);
> +		dev_err(&priv->client->dev, "Failed to get enable gpio: %d\n",
> +			ret);
> +		return ret;
> +	}
> +
> +	priv->regulator = devm_regulator_get(&priv->client->dev, "vled");
> +	if (IS_ERR(priv->regulator))
> +		priv->regulator = NULL;
> +
> +	device_for_each_child_node(&priv->client->dev, child) {
> +		led = &priv->leds[i];
> +		if (fwnode_property_present(child, "ti,led-bank")) {
> +			ret = fwnode_property_read_u32_array(child,
> +							     "ti,led-bank",
> +							     NULL, 0);
> +			ret = fwnode_property_read_u32_array(child,
> +							     "ti,led-bank",
> +							     led_banks,
> +							     ret);
> +
> +			priv->num_of_banked_leds = ARRAY_SIZE(led_banks);
> +
> +			ret = lp50xx_set_banks(priv, led_banks);
> +			if (ret) {
> +				dev_err(&priv->client->dev,
> +					"Cannot setup banked LEDs\n");
> +				fwnode_handle_put(child);
> +				goto child_out;
> +			}
> +			led->ctrl_bank_enabled = 1;
> +
> +		} else {
> +			ret = fwnode_property_read_u32(child, "reg",
> +					       &led_number);

Not checking ret val?

> +
> +			led->led_number = led_number;
> +		}
> +		if (ret) {
> +			dev_err(&priv->client->dev,
> +				"led sourcing property missing\n");
> +			fwnode_handle_put(child);
> +			goto child_out;
> +		}
> +
> +		if (led_number > priv->chip_info->num_leds) {
> +			dev_err(&priv->client->dev,
> +				"led-sources property is invalid\n");
> +			ret = -EINVAL;
> +			fwnode_handle_put(child);
> +			goto child_out;
> +		}
> +
> +		init_data.fwnode = child;
> +		fwnode_property_read_string(child, "linux,default-trigger",
> +				    &led->led_dev.default_trigger);
> +		num_colors = 0;
> +
> +		fwnode_for_each_child_node(child, led_node) {
> +			ret = fwnode_property_read_u32(led_node, "color",
> +						       &color_id);
> +			if (ret)
> +				dev_err(&priv->client->dev,
> +				"Cannot read color\n");
> +
> +			set_bit(color_id, &led->mc_cdev.available_colors);
> +			num_colors++;
> +
> +		}
> +
> +		led->priv = priv;
> +		led->mc_cdev.num_leds = num_colors;
> +		led->mc_cdev.led_cdev = &led->led_dev;
> +		led->led_dev.brightness_set_blocking = lp50xx_brightness_set;
> +		led->led_dev.brightness_get = lp50xx_brightness_get;
> +		ret = led_classdev_multicolor_register_ext(&priv->client->dev,
> +						       &led->mc_cdev,
> +						       &init_data);
> +		if (ret) {
> +			dev_err(&priv->client->dev, "led register err: %d\n",
> +				ret);
> +			fwnode_handle_put(child);
> +			goto child_out;
> +		}
> +		i++;
> +	}
> +
> +child_out:
> +	return ret;
> +}
> +
> +static int lp50xx_probe(struct i2c_client *client,
> +			const struct i2c_device_id *id)
> +{
> +	struct lp50xx *led;
> +	int count;
> +	int ret;
> +
> +	count = device_get_child_node_count(&client->dev);
> +	if (!count) {
> +		dev_err(&client->dev, "LEDs are not defined in device tree!");
> +		return -ENODEV;
> +	}
> +
> +	led = devm_kzalloc(&client->dev, struct_size(led, leds, count),
> +			   GFP_KERNEL);
> +	if (!led)
> +		return -ENOMEM;
> +
> +	mutex_init(&led->lock);
> +	led->client = client;
> +	led->dev = &client->dev;
> +	led->chip_info = &lp50xx_chip_info_tbl[id->driver_data];
> +	i2c_set_clientdata(client, led);
> +
> +	led->regmap = devm_regmap_init_i2c(client,
> +					&led->chip_info->lp50xx_regmap_config);
> +	if (IS_ERR(led->regmap)) {
> +		ret = PTR_ERR(led->regmap);
> +		dev_err(&client->dev, "Failed to allocate register map: %d\n",
> +			ret);
> +		return ret;
> +	}
> +
> +	ret = lp50xx_reset(led);
> +	if (ret)
> +		return ret;
> +
> +	ret = lp50xx_probe_dt(led);
> +	if (ret)
> +		return ret;
> +
> +	return lp50xx_enable_disable(led, LP50XX_CHIP_EN);
> +}
> +
> +static int lp50xx_remove(struct i2c_client *client)
> +{
> +	struct lp50xx *led = i2c_get_clientdata(client);
> +	int ret;
> +
> +	ret = lp50xx_enable_disable(led, LP50XX_CHIP_EN);
> +	if (ret) {
> +		dev_err(&led->client->dev, "Failed to disable regulator\n");
> +		return ret;
> +	}
> +
> +	if (led->enable_gpio)
> +		gpiod_direction_output(led->enable_gpio, 0);
> +
> +	if (led->regulator) {
> +		ret = regulator_disable(led->regulator);
> +		if (ret)
> +			dev_err(&led->client->dev,
> +				"Failed to disable regulator\n");
> +	}
> +
> +	mutex_destroy(&led->lock);
> +
> +	return 0;
> +}
> +
> +static const struct i2c_device_id lp50xx_id[] = {
> +	{ "lp5009", LP5009 },
> +	{ "lp5012", LP5012 },
> +	{ "lp5018", LP5018 },
> +	{ "lp5024", LP5024 },
> +	{ "lp5030", LP5030 },
> +	{ "lp5036", LP5036 },
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(i2c, lp50xx_id);
> +
> +static const struct of_device_id of_lp50xx_leds_match[] = {
> +	{ .compatible = "ti,lp5009", .data = (void *)LP5009 },
> +	{ .compatible = "ti,lp5012", .data = (void *)LP5012 },
> +	{ .compatible = "ti,lp5018", .data = (void *)LP5018 },
> +	{ .compatible = "ti,lp5024", .data = (void *)LP5024 },
> +	{ .compatible = "ti,lp5030", .data = (void *)LP5030 },
> +	{ .compatible = "ti,lp5036", .data = (void *)LP5036 },
> +	{},
> +};
> +MODULE_DEVICE_TABLE(of, of_lp50xx_leds_match);
> +
> +static struct i2c_driver lp50xx_driver = {
> +	.driver = {
> +		.name	= "lp50xx",
> +		.of_match_table = of_lp50xx_leds_match,
> +	},
> +	.probe		= lp50xx_probe,
> +	.remove		= lp50xx_remove,
> +	.id_table	= lp50xx_id,
> +};
> +module_i2c_driver(lp50xx_driver);
> +
> +MODULE_DESCRIPTION("Texas Instruments LP50XX LED driver");
> +MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com>");
> +MODULE_LICENSE("GPL v2");
> 

-- 
Best regards,
Jacek Anaszewski

^ permalink raw reply	[flat|nested] 38+ messages in thread

* Re: [PATCH v9 08/15] dt: bindings: lp55xx: Be consistent in the document with LED
  2019-09-25 17:46 ` [PATCH v9 08/15] dt: bindings: lp55xx: Be consistent in the document with LED Dan Murphy
@ 2019-09-25 21:31   ` Jacek Anaszewski
  2019-09-26 12:00     ` Dan Murphy
  0 siblings, 1 reply; 38+ messages in thread
From: Jacek Anaszewski @ 2019-09-25 21:31 UTC (permalink / raw)
  To: Dan Murphy, pavel; +Cc: linux-leds, linux-kernel

Dan,

On 9/25/19 7:46 PM, Dan Murphy wrote:
> Update the document to be consistent in case when using LED.

s/LED/"LED"/.

> This should be capital throughout the document.
> 
> Signed-off-by: Dan Murphy <dmurphy@ti.com>
> ---
>  Documentation/devicetree/bindings/leds/leds-lp55xx.txt | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/leds/leds-lp55xx.txt b/Documentation/devicetree/bindings/leds/leds-lp55xx.txt
> index 1b66a413fb9d..bfe2805c5534 100644
> --- a/Documentation/devicetree/bindings/leds/leds-lp55xx.txt
> +++ b/Documentation/devicetree/bindings/leds/leds-lp55xx.txt
> @@ -1,4 +1,4 @@
> -Binding for TI/National Semiconductor LP55xx Led Drivers
> +Binding for TI/National Semiconductor LP55xx LED Drivers
>  
>  Required properties:
>  - compatible: one of
> @@ -12,8 +12,8 @@ Required properties:
>  - clock-mode: Input clock mode, (0: automode, 1: internal, 2: external)
>  
>  Each child has own specific current settings
> -- led-cur: Current setting at each led channel (mA x10, 0 if led is not connected)
> -- max-cur: Maximun current at each led channel.
> +- led-cur: Current setting at each LED channel (mA x10, 0 if LED is not connected)
> +- max-cur: Maximun current at each LED channel.
>  
>  Optional properties:
>  - enable-gpio: GPIO attached to the chip's enable pin
> 

-- 
Best regards,
Jacek Anaszewski

^ permalink raw reply	[flat|nested] 38+ messages in thread

* Re: [PATCH v9 09/15] dt: bindings: lp55xx: Update binding for Multicolor Framework
  2019-09-25 17:46 ` [PATCH v9 09/15] dt: bindings: lp55xx: Update binding for Multicolor Framework Dan Murphy
@ 2019-09-25 21:34   ` Jacek Anaszewski
  2019-09-26 12:00     ` Dan Murphy
  0 siblings, 1 reply; 38+ messages in thread
From: Jacek Anaszewski @ 2019-09-25 21:34 UTC (permalink / raw)
  To: Dan Murphy, pavel
  Cc: linux-leds, linux-kernel, Tony Lindgren, Benoît Cousson,
	Linus Walleij, Shawn Guo, Sascha Hauer, Pengutronix Kernel Team,
	Fabio Estevam, NXP Linux Team

Dan,

On 9/25/19 7:46 PM, Dan Murphy wrote:
> Update the DT binding to include the properties to use the
> multicolor framework for the devices that use the LP55xx
> framework.
> 
> Signed-off-by: Dan Murphy <dmurphy@ti.com>
> CC: Tony Lindgren <tony@atomide.com>
> CC: "Benoît Cousson" <bcousson@baylibre.com>
> CC: Linus Walleij <linus.walleij@linaro.org>
> CC: Shawn Guo <shawnguo@kernel.org>
> CC: Sascha Hauer <s.hauer@pengutronix.de>
> CC: Pengutronix Kernel Team <kernel@pengutronix.de>
> CC: Fabio Estevam <festevam@gmail.com>
> CC: NXP Linux Team <linux-imx@nxp.com>
> ---
>  .../devicetree/bindings/leds/leds-lp55xx.txt  | 99 +++++++++++++++++++
>  1 file changed, 99 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/leds/leds-lp55xx.txt b/Documentation/devicetree/bindings/leds/leds-lp55xx.txt
> index bfe2805c5534..c120d2bde3bd 100644
> --- a/Documentation/devicetree/bindings/leds/leds-lp55xx.txt
> +++ b/Documentation/devicetree/bindings/leds/leds-lp55xx.txt
> @@ -1,6 +1,8 @@
>  Binding for TI/National Semiconductor LP55xx LED Drivers
>  
>  Required properties:
> +- #address-cells: 1
> +- #size-cells: 0
>  - compatible: one of
>  	national,lp5521
>  	national,lp5523
> @@ -14,6 +16,18 @@ Required properties:
>  Each child has own specific current settings
>  - led-cur: Current setting at each LED channel (mA x10, 0 if LED is not connected)
>  - max-cur: Maximun current at each LED channel.
> +- reg: Output channel for the LED.  This is zero based channel identifier and
> +	the data sheet is a one based channel identifier.
> +	reg value to output to LED output number
> +	D1 = reg value is 0
> +	D2 = reg value is 1
> +	D3 = reg value is 2
> +	D4 = reg value is 3
> +	D5 = reg value is 4
> +	D6 = reg value is 5
> +	D7 = reg value is 6
> +	D8 = reg value is 7
> +	D9 = reg value is 8
>  
>  Optional properties:
>  - enable-gpio: GPIO attached to the chip's enable pin
> @@ -35,23 +49,28 @@ example 1) LP5521
>  on channel 0.
>  
>  lp5521@32 {
> +	#address-cells = <1>;
> +	#size-cells = <0>;
>  	compatible = "national,lp5521";
>  	reg = <0x32>;
>  	label = "lp5521_pri";
>  	clock-mode = /bits/ 8 <2>;
>  
>  	chan0 {

s/chan0/chan@0/

The same applies to the remaining occurrences in this file and to
the other patches from the patch set as already pointed out.

> +		reg = <0>;
>  		led-cur = /bits/ 8 <0x2f>;
>  		max-cur = /bits/ 8 <0x5f>;
>  		linux,default-trigger = "heartbeat";
>  	};
>

-- 
Best regards,
Jacek Anaszewski

^ permalink raw reply	[flat|nested] 38+ messages in thread

* Re: [PATCH v9 13/15] leds: lp55xx: Update the lp55xx to use the multi color framework
  2019-09-25 17:46 ` [PATCH v9 13/15] leds: lp55xx: Update the lp55xx to use the multi color framework Dan Murphy
@ 2019-09-25 22:00   ` Jacek Anaszewski
  2019-09-26 12:02     ` Dan Murphy
  0 siblings, 1 reply; 38+ messages in thread
From: Jacek Anaszewski @ 2019-09-25 22:00 UTC (permalink / raw)
  To: Dan Murphy, pavel; +Cc: linux-leds, linux-kernel

Dan,

On 9/25/19 7:46 PM, Dan Murphy wrote:
> Update the lp5523 to allow the use of the multi color framework.
> 
> Signed-off-by: Dan Murphy <dmurphy@ti.com>
> ---
>  drivers/leds/Kconfig                      |   1 +
>  drivers/leds/leds-lp5523.c                |  13 ++
>  drivers/leds/leds-lp55xx-common.c         | 150 ++++++++++++++++++----
>  drivers/leds/leds-lp55xx-common.h         |  11 ++
>  include/linux/platform_data/leds-lp55xx.h |   6 +
>  5 files changed, 157 insertions(+), 24 deletions(-)
> 
> diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
> index 84f60e35c5ee..dc3d9f2194cd 100644
> --- a/drivers/leds/Kconfig
> +++ b/drivers/leds/Kconfig
> @@ -377,6 +377,7 @@ config LEDS_LP50XX
>  config LEDS_LP55XX_COMMON
>  	tristate "Common Driver for TI/National LP5521/5523/55231/5562/8501"
>  	depends on LEDS_LP5521 || LEDS_LP5523 || LEDS_LP5562 || LEDS_LP8501
> +	depends on LEDS_CLASS_MULTI_COLOR && OF
>  	select FW_LOADER
>  	select FW_LOADER_USER_HELPER
>  	help
> diff --git a/drivers/leds/leds-lp5523.c b/drivers/leds/leds-lp5523.c
> index d0b931a136b9..8b2cdb98fed6 100644
> --- a/drivers/leds/leds-lp5523.c
> +++ b/drivers/leds/leds-lp5523.c
> @@ -791,6 +791,18 @@ static ssize_t store_master_fader_leds(struct device *dev,
>  	return ret;
>  }
>  
> +static int lp5523_led_intensity(struct lp55xx_led *led, int chan_num)

Why do we need this function? brightness op will not suffice?

> +{
> +	struct lp55xx_chip *chip = led->chip;
> +	int ret;
> +
> +	mutex_lock(&chip->lock);
> +	ret = lp55xx_write(chip, LP5523_REG_LED_PWM_BASE + chan_num,
> +		     led->brightness);
> +	mutex_unlock(&chip->lock);
> +	return ret;
> +}
> +
>  static int lp5523_led_brightness(struct lp55xx_led *led)
>  {
>  	struct lp55xx_chip *chip = led->chip;
> @@ -857,6 +869,7 @@ static struct lp55xx_device_config lp5523_cfg = {
>  	.max_channel  = LP5523_MAX_LEDS,
>  	.post_init_device   = lp5523_post_init_device,
>  	.brightness_fn      = lp5523_led_brightness,
> +	.color_intensity_fn = lp5523_led_intensity,
>  	.set_led_current    = lp5523_set_led_current,
>  	.firmware_cb        = lp5523_firmware_loaded,
>  	.run_engine         = lp5523_run_engine,
> diff --git a/drivers/leds/leds-lp55xx-common.c b/drivers/leds/leds-lp55xx-common.c
> index 44ced02b49f9..0e4b3a9d3047 100644
> --- a/drivers/leds/leds-lp55xx-common.c
> +++ b/drivers/leds/leds-lp55xx-common.c
> @@ -136,9 +136,26 @@ static int lp55xx_set_brightness(struct led_classdev *cdev,
>  {
>  	struct lp55xx_led *led = cdev_to_lp55xx_led(cdev);
>  	struct lp55xx_device_config *cfg = led->chip->cfg;
> +	int brightness_val[LP55XX_MAX_GROUPED_CHAN];
> +	int ret;
> +	int i;
> +
> +	if (led->mc_cdev.num_leds > 1) {
> +		led_mc_calc_brightness(&led->mc_cdev,
> +				       brightness, brightness_val);
> +		for (i = 0; i < led->mc_cdev.num_leds; i++) {
> +			led->brightness = brightness_val[i];
> +			ret = cfg->color_intensity_fn(led,
> +						      led->grouped_channels[i]);

Now we will have three separate calls for each color component
(and possibly sleeping on mutex on contention).

Probably LED mc class use case will need a bit different design.

Also, instead of grouped_channels we could possibly have

led_mc_get_color_id(&led->mc_dev, i)

which would map entry position index to color_id.

I will stop reviewing here and will continue after taking
deeper look at this lp55xx design.

-- 
Best regards,
Jacek Anaszewski

^ permalink raw reply	[flat|nested] 38+ messages in thread

* Re: [PATCH v9 01/15] leds: multicolor: Add sysfs interface definition
  2019-09-25 17:46 ` [PATCH v9 01/15] leds: multicolor: Add sysfs interface definition Dan Murphy
  2019-09-25 20:58   ` Jacek Anaszewski
@ 2019-09-26 11:10   ` Pavel Machek
  2019-09-26 12:08     ` Dan Murphy
  1 sibling, 1 reply; 38+ messages in thread
From: Pavel Machek @ 2019-09-26 11:10 UTC (permalink / raw)
  To: Dan Murphy
  Cc: jacek.anaszewski, linux-leds, linux-kernel, linus.walleij,
	shawnguo, Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam,
	NXP Linux Team, Tony Lindgren, Benoît Cousson

[-- Attachment #1: Type: text/plain, Size: 2308 bytes --]

Hi!

> diff --git a/Documentation/leds/leds-class-multicolor.rst b/Documentation/leds/leds-class-multicolor.rst
> new file mode 100644
> index 000000000000..87a1588d7619
> --- /dev/null
> +++ b/Documentation/leds/leds-class-multicolor.rst
> @@ -0,0 +1,96 @@
> +====================================
> +Multi Color LED handling under Linux
> +====================================
> +
> +Description
> +===========
> +The multi color class groups monochrome LEDs and allows controlling two
> +aspects of the final combined color: hue and lightness. The former is
> +controlled via <color>_intensity files and the latter is controlled
> +via brightness file.
> +
> +For more details on hue and lightness notions please refer to
> +https://en.wikipedia.org/wiki/CIECAM02.
> +
> +Note that intensity files only cache the written value and the actual
> +change of hardware state occurs upon writing brightness file. This
> +allows for changing many factors of the perceived color in a virtually
> +unnoticeable way for the human observer.

So unlike previous versions, userspace will need to write 4 files
instead of one in the common case.

> +Directory Layout Example
> +========================
> +root:/sys/class/leds/rgb:grouped_leds# ls -lR colors/
> +-rw-rwxr-- 1 root root 4096 Jul 7 03:10 red_max_intensity
> +--w--wx-w- 1 root root 4096 Jul 7 03:10 red_intensity
> +-rw-rwxr-- 1 root root 4096 Jul 7 03:10 green_max_intensity
> +--w--wx-w- 1 root root 4096 Jul 7 03:10 green_intensity
> +-rw-rwxr-- 1 root root 4096 Jul 7 03:10 blue_max_intensity
> +--w--wx-w- 1 root root 4096 Jul 7 03:10 blue_intensity

Permissions are way off here.

> +A user first writes the color LED brightness file with the brightness level that
> +is necessary to achieve a blueish violet output from the RGB LED group.
> +
> +echo 138 > /sys/class/leds/rgb:grouped_leds/red_intensity
> +echo 43 > /sys/class/leds/rgb:grouped_leds/green_intensity
> +echo 226 > /sys/class/leds/rgb:grouped_leds/blue_intensity

No, you can't tell what kind of color this will result in.

Will you be on ELCE/OSS in Lyon?

Best regards,
									Pavel

-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 181 bytes --]

^ permalink raw reply	[flat|nested] 38+ messages in thread

* Re: [PATCH v9 05/15] leds: multicolor: Introduce a multicolor class definition
  2019-09-25 21:12   ` Jacek Anaszewski
@ 2019-09-26 11:52     ` Dan Murphy
  2019-09-28 10:09       ` Jacek Anaszewski
  0 siblings, 1 reply; 38+ messages in thread
From: Dan Murphy @ 2019-09-26 11:52 UTC (permalink / raw)
  To: Jacek Anaszewski, pavel; +Cc: linux-leds, linux-kernel

Jacek

On 9/25/19 4:12 PM, Jacek Anaszewski wrote:
> Dan,
>
> On 9/25/19 7:46 PM, Dan Murphy wrote:
>> Introduce a multicolor class that groups colored LEDs
>> within a LED node.
>>
>> The multi color class groups monochrome LEDs and allows controlling two
>> aspects of the final combined color: hue and lightness. The former is
>> controlled via <color>_intensity files and the latter is controlled
>> via brightness file.
>>
>> Signed-off-by: Dan Murphy <dmurphy@ti.com>
>> ---
>>   drivers/leds/Kconfig                 |  10 ++
>>   drivers/leds/Makefile                |   1 +
>>   drivers/leds/led-class-multicolor.c  | 220 +++++++++++++++++++++++++++
>>   include/linux/led-class-multicolor.h |  74 +++++++++
>>   4 files changed, 305 insertions(+)
>>   create mode 100644 drivers/leds/led-class-multicolor.c
>>   create mode 100644 include/linux/led-class-multicolor.h
>>
>> diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
>> index 6e7703fd03d0..cfb1ebb6517f 100644
>> --- a/drivers/leds/Kconfig
>> +++ b/drivers/leds/Kconfig
>> @@ -30,6 +30,16 @@ config LEDS_CLASS_FLASH
>>   	  for the flash related features of a LED device. It can be built
>>   	  as a module.
>>   
>> +config LEDS_CLASS_MULTI_COLOR
>> +	tristate "LED Mulit Color LED Class Support"
>> +	depends on LEDS_CLASS
>> +	help
>> +	  This option enables the multicolor LED sysfs class in /sys/class/leds.
>> +	  It wraps LED class and adds multicolor LED specific sysfs attributes
>> +	  and kernel internal API to it. You'll need this to provide support
>> +	  for multicolor LEDs that are grouped together. This class is not
>> +	  intended for single color LEDs. It can be built as a module.
>> +
>>   config LEDS_BRIGHTNESS_HW_CHANGED
>>   	bool "LED Class brightness_hw_changed attribute support"
>>   	depends on LEDS_CLASS
>> diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
>> index 2da39e896ce8..841038cfe35b 100644
>> --- a/drivers/leds/Makefile
>> +++ b/drivers/leds/Makefile
>> @@ -4,6 +4,7 @@
>>   obj-$(CONFIG_NEW_LEDS)			+= led-core.o
>>   obj-$(CONFIG_LEDS_CLASS)		+= led-class.o
>>   obj-$(CONFIG_LEDS_CLASS_FLASH)		+= led-class-flash.o
>> +obj-$(CONFIG_LEDS_CLASS_MULTI_COLOR)	+= led-class-multicolor.o
>>   obj-$(CONFIG_LEDS_TRIGGERS)		+= led-triggers.o
>>   
>>   # LED Platform Drivers
>> diff --git a/drivers/leds/led-class-multicolor.c b/drivers/leds/led-class-multicolor.c
>> new file mode 100644
>> index 000000000000..25371bd9a860
>> --- /dev/null
>> +++ b/drivers/leds/led-class-multicolor.c
>> @@ -0,0 +1,220 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +// LED Multi Color class interface
>> +// Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/
>> +
>> +#include <linux/device.h>
>> +#include <linux/init.h>
>> +#include <linux/led-class-multicolor.h>
>> +#include <linux/module.h>
>> +#include <linux/slab.h>
>> +#include <linux/uaccess.h>
>> +
>> +#include "leds.h"
>> +
>> +#define INTENSITY_NAME		"_intensity"
>> +#define MAX_INTENSITY_NAME	"_max_intensity"
>> +
>> +void led_mc_calc_brightness(struct led_classdev_mc *mcled_cdev,
>> +			    enum led_brightness brightness,
>> +			    int brightness_val[])
>> +{
>> +	struct led_mc_color_entry *priv;
>> +	int i = 0;
>> +
>> +	list_for_each_entry(priv, &mcled_cdev->color_list, list) {
> I think we should have some way to let the caller know exact mapping
> of brightness_val to color_id. Possibly LED mc core should provide
> a helper to get color_id by color entry index.

Why would we need that?


>
> But this remark is actually more relevant to the place of calling.
> I'll try to propose something there.
>
> And regarding brightness_val name - how about:
>
> s/brightness_val/brightness_component/ ?

component does not make sense to me in this context.  Actually 
brightness_val

does not make sense either since it is an adjusted intensity and 
brightness is passed in in the second arg

I think intensity_values make more sense.


>
>
>> +		brightness_val[i] = brightness *
>> +				    priv->intensity / priv->max_intensity;
>> +		i++;
>> +	}
>> +}
>> +EXPORT_SYMBOL_GPL(led_mc_calc_brightness);
>> +
>> +static ssize_t intensity_store(struct device *dev,
>> +				struct device_attribute *intensity_attr,
>> +				const char *buf, size_t size)
>> +{
>> +	struct led_mc_color_entry *priv = container_of(intensity_attr,
>> +						    struct led_mc_color_entry,
>> +						      intensity_attr);
>> +	struct led_classdev *led_cdev = priv->mcled_cdev->led_cdev;
>> +	unsigned long value;
>> +	ssize_t ret;
>> +
>> +	mutex_lock(&led_cdev->led_access);
>> +
>> +	ret = kstrtoul(buf, 10, &value);
>> +	if (ret)
>> +		goto unlock;
>> +
>> +	if (value > priv->max_intensity) {
>> +		ret = -EINVAL;
>> +		goto unlock;
>> +	}
>> +
>> +	priv->intensity = value;
>> +	ret = size;
>> +
>> +unlock:
>> +	mutex_unlock(&led_cdev->led_access);
>> +	return ret;
>> +}
>> +
>> +static ssize_t intensity_show(struct device *dev,
>> +			      struct device_attribute *intensity_attr,
>> +			      char *buf)
>> +{
>> +	struct led_mc_color_entry *priv = container_of(intensity_attr,
>> +						    struct led_mc_color_entry,
>> +						      intensity_attr);
>> +
>> +	return sprintf(buf, "%d\n", priv->intensity);
>> +}
>> +
>> +static ssize_t max_intensity_show(struct device *dev,
>> +				   struct device_attribute *max_intensity_attr,
>> +				   char *buf)
>> +{
>> +	struct led_mc_color_entry *priv = container_of(max_intensity_attr,
>> +						    struct led_mc_color_entry,
>> +						      max_intensity_attr);
>> +
>> +	return sprintf(buf, "%d\n", priv->max_intensity);
>> +}
>> +
>> +static struct attribute *led_color_attrs[] = {
>> +	NULL,
>> +};
>> +
>> +static struct attribute_group led_color_group = {
>> +	.name = "colors",
>> +	.attrs = led_color_attrs,
>> +};
>> +
>> +static int led_multicolor_init_color(struct led_classdev_mc *mcled_cdev,
>> +				     int color_id, int color_index)
>> +{
>> +	struct led_classdev *led_cdev = mcled_cdev->led_cdev;
>> +	struct led_mc_color_entry *mc_priv;
>> +	char *intensity_file_name;
>> +	char *max_intensity_file_name;
>> +	size_t len;
>> +	int ret;
>> +
>> +	mc_priv = devm_kzalloc(led_cdev->dev, sizeof(*mc_priv), GFP_KERNEL);
>> +	if (!mc_priv)
>> +		return -ENOMEM;
>> +
>> +	mc_priv->led_color_id = color_id;
>> +	mc_priv->mcled_cdev = mcled_cdev;
>> +
>> +	sysfs_attr_init(&mc_priv->intensity_attr.attr);
>> +	len = strlen(led_colors[color_id]) + strlen(INTENSITY_NAME) + 1;
>> +	intensity_file_name = kzalloc(len, GFP_KERNEL);
>> +	if (!intensity_file_name)
>> +		return -ENOMEM;
>> +
>> +	snprintf(intensity_file_name, len, "%s%s",
>> +		 led_colors[color_id], INTENSITY_NAME);
>> +	mc_priv->intensity_attr.attr.name = intensity_file_name;
>> +	mc_priv->intensity_attr.attr.mode = 644;
> Proper octal value should begin with 0.
> But please use combinations of dedicated S_I* definitions
> from include/uapi/linux/stat.h.

Using the S_I* causes checkpatch warnings

WARNING: Symbolic permissions 'S_IRUGO' are not preferred. Consider 
using octal permissions '0444'.
#139: FILE: drivers/leds/led-class-multicolor.c:139:
+    mc_priv->max_intensity_attr.attr.mode = S_IRUGO;

>
>> +	mc_priv->intensity_attr.store = intensity_store;
>> +	mc_priv->intensity_attr.show = intensity_show;
>> +	ret = sysfs_add_file_to_group(&led_cdev->dev->kobj,
>> +				      &mc_priv->intensity_attr.attr,
>> +				      led_color_group.name);
>> +	if (ret)
>> +		goto intensity_err_out;
>> +
>> +	sysfs_attr_init(&mc_priv->max_intensity_attr.attr);
>> +	len = strlen(led_colors[color_id]) + strlen(MAX_INTENSITY_NAME) + 1;
>> +	max_intensity_file_name = kzalloc(len, GFP_KERNEL);
>> +	if (!max_intensity_file_name) {
>> +		ret = -ENOMEM;
>> +		goto intensity_err_out;
>> +	}
>> +
>> +	snprintf(max_intensity_file_name, len, "%s%s",
>> +		 led_colors[color_id], MAX_INTENSITY_NAME);
>> +	mc_priv->max_intensity_attr.attr.name = max_intensity_file_name;
>> +	mc_priv->max_intensity_attr.attr.mode = 444;
>> +	mc_priv->max_intensity_attr.show = max_intensity_show;
>> +	ret = sysfs_add_file_to_group(&led_cdev->dev->kobj,
>> +				      &mc_priv->max_intensity_attr.attr,
>> +				      led_color_group.name);
>> +	if (ret)
>> +		goto max_intensity_err_out;
>> +
>> +	mc_priv->max_intensity = LED_FULL;
>> +	list_add_tail(&mc_priv->list, &mcled_cdev->color_list);
>> +
>> +max_intensity_err_out:
>> +	kfree(max_intensity_file_name);
>> +intensity_err_out:
>> +	kfree(intensity_file_name);
>> +	return ret;
>> +}
>> +
>> +static int led_multicolor_init_color_dir(struct led_classdev_mc *mcled_cdev)
>> +{
>> +	struct led_classdev *led_cdev = mcled_cdev->led_cdev;
>> +	int ret;
>> +	int i, color_index = 0;
>> +
>> +	ret = sysfs_create_group(&led_cdev->dev->kobj, &led_color_group);
>> +	if (ret)
>> +		return ret;
>> +
>> +	for (i = 0; i < LED_COLOR_ID_MAX; i++) {
>> +		if (test_bit(i, &mcled_cdev->available_colors)) {
>> +			ret = led_multicolor_init_color(mcled_cdev, i,
>> +							color_index);
> color_index is now unused AFAICS.

Ack

>
>> +			if (ret)
>> +				break;
>> +
>> +			color_index++;
>> +		}
>> +	}
>> +
>> +	return ret;
>> +}
>> +
>> +int led_classdev_multicolor_register_ext(struct device *parent,
>> +				     struct led_classdev_mc *mcled_cdev,
>> +				     struct led_init_data *init_data)
>> +{
>> +	struct led_classdev *led_cdev;
>> +	int ret;
>> +
>> +	if (!mcled_cdev)
>> +		return -EINVAL;
>> +
>> +	led_cdev = mcled_cdev->led_cdev;
>> +	INIT_LIST_HEAD(&mcled_cdev->color_list);
>> +
>> +	/* Register led class device */
>> +	ret = led_classdev_register_ext(parent, led_cdev, init_data);
>> +	if (ret)
>> +		return ret;
>> +
>> +	return led_multicolor_init_color_dir(mcled_cdev);
>> +}
>> +EXPORT_SYMBOL_GPL(led_classdev_multicolor_register_ext);
> Why devm_* versions are missing now?

I was using the led-class-flash.c as an example and that class does not 
have the devm_* versions either.

Tried to make the 2 child classes look the same.

If they are missing from the led-class-flash code then that needs to be 
fixed as well.

>
>> +
>> +void led_classdev_multicolor_unregister(struct led_classdev_mc *mcled_cdev)
>> +{
>> +	struct led_mc_color_entry *priv, *next;
>> +
>> +	if (!mcled_cdev)
>> +		return;
>> +
>> +	list_for_each_entry_safe(priv, next, &mcled_cdev->color_list, list)
>> +		list_del(&priv->list);
>> +
>> +	sysfs_remove_group(&mcled_cdev->led_cdev->dev->kobj, &led_color_group);
>> +	led_classdev_unregister(mcled_cdev->led_cdev);
>> +}
>> +EXPORT_SYMBOL_GPL(led_classdev_multicolor_unregister);
>> +
>> +MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com>");
>> +MODULE_DESCRIPTION("Multi Color LED class interface");
>> +MODULE_LICENSE("GPL v2");
>> diff --git a/include/linux/led-class-multicolor.h b/include/linux/led-class-multicolor.h
>> new file mode 100644
>> index 000000000000..280ba5a614b4
>> --- /dev/null
>> +++ b/include/linux/led-class-multicolor.h
>> @@ -0,0 +1,74 @@
>> +/* SPDX-License-Identifier: GPL-2.0 */
>> +/* LED Multicolor class interface
>> + * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/
>> + */
>> +
>> +#ifndef __LINUX_MULTICOLOR_LEDS_H_INCLUDED
>> +#define __LINUX_MULTICOLOR_LEDS_H_INCLUDED
>> +
>> +#include <linux/leds.h>
>> +#include <dt-bindings/leds/common.h>
>> +
>> +struct led_classdev_mc;
>> +
>> +struct led_mc_color_entry {
>> +	struct led_classdev_mc *mcled_cdev;
>> +
>> +	struct device_attribute max_intensity_attr;
>> +	struct device_attribute intensity_attr;
>> +
>> +	enum led_brightness max_intensity;
>> +	enum led_brightness intensity;
>> +
>> +	struct list_head list;
>> +
>> +	int led_color_id;
>> +};
>> +
>> +struct led_classdev_mc {
>> +	/* led class device */
>> +	struct led_classdev *led_cdev;
>> +	struct list_head color_list;
>> +
>> +	unsigned long available_colors;
>> +	int num_leds;
>> +};
>> +
>> +static inline struct led_classdev_mc *lcdev_to_mccdev(
>> +						struct led_classdev *lcdev)
>> +{
>> +	return container_of(lcdev, struct led_classdev_mc, led_cdev);
>> +}
>> +
>> +/**
>> + * led_classdev_multicolor_register_ext - register a new object of led_classdev
>> + *				      class with support for multicolor LEDs
>> + * @parent: the multicolor LED to register
>> + * @mcled_cdev: the led_classdev_mc structure for this device
>> + * @init_data: the LED class Multi color device initialization data
>> + *
>> + * Returns: 0 on success or negative error value on failure
>> + */
>> +int led_classdev_multicolor_register_ext(struct device *parent,
>> +					    struct led_classdev_mc *mcled_cdev,
>> +					    struct led_init_data *init_data);
>> +
>> +#define led_classdev_multicolor_register(parent, mcled_cdev)		\
>> +	led_classdev_multicolor_register_ext(parent, mcled_cdev, NULL)
> Please turn it into inline.

Again same statement as above on the led-class-flash.  This is how this 
is defined there.

If that is not correct in the flash class then that needs to be fixed as 
well.

Dan

>
>> +
>> +/**
>> + * led_classdev_multicolor_unregister - unregisters an object of led_classdev
>> + *					class with support for multicolor LEDs
>> + * @mcled_cdev: the multicolor LED to unregister
>> + *
>> + * Unregister a previously registered via led_classdev_multicolor_register
>> + * object
>> + */
>> +void led_classdev_multicolor_unregister(struct led_classdev_mc *mcled_cdev);
>> +
>> +/* Calculate brightness for the monochrome LED cluster */
>> +void led_mc_calc_brightness(struct led_classdev_mc *mcled_cdev,
>> +			    enum led_brightness brightness,
>> +			    int brightness_val[]);
>> +
>> +#endif	/* __LINUX_MULTICOLOR_LEDS_H_INCLUDED */
>>

^ permalink raw reply	[flat|nested] 38+ messages in thread

* Re: [PATCH v9 07/15] leds: lp50xx: Add the LP50XX family of the RGB LED driver
  2019-09-25 21:27   ` Jacek Anaszewski
@ 2019-09-26 11:59     ` Dan Murphy
  2019-09-28 10:29       ` Jacek Anaszewski
  0 siblings, 1 reply; 38+ messages in thread
From: Dan Murphy @ 2019-09-26 11:59 UTC (permalink / raw)
  To: Jacek Anaszewski, pavel; +Cc: linux-leds, linux-kernel

Jacek

On 9/25/19 4:27 PM, Jacek Anaszewski wrote:
> Dan,
>
> On 9/25/19 7:46 PM, Dan Murphy wrote:

<big_snip>

>> +
>> +static int lp50xx_brightness_set(struct led_classdev *cdev,
>> +			     enum led_brightness brightness)
>> +{
>> +	struct lp50xx_led *led = container_of(cdev, struct lp50xx_led, led_dev);
>> +	const struct lp50xx_chip_info *led_chip = led->priv->chip_info;
>> +	struct led_mc_color_entry *color_data;
>> +	u8 led_offset, reg_val, reg_color_offset;
>> +	int ret = 0;
>> +
>> +	mutex_lock(&led->priv->lock);
>> +
>> +	if (led->ctrl_bank_enabled)
>> +		reg_val = led_chip->bank_brt_reg;
>> +	else
>> +		reg_val = led_chip->led_brightness0_reg +
>> +			  led->led_number;
>> +
>> +	ret = regmap_write(led->priv->regmap, reg_val, brightness);
>> +	if (ret) {
>> +		dev_err(&led->priv->client->dev,
>> +			"Cannot write brightness value %d\n", ret);
>> +		goto out;
>> +	}
>> +
>> +	list_for_each_entry(color_data, &led->mc_cdev.color_list, list) {
>> +		if (color_data->led_color_id == LED_COLOR_ID_RED)
>> +			reg_color_offset = 0;
>> +		else if (color_data->led_color_id == LED_COLOR_ID_GREEN)
>> +			reg_color_offset = 1;
>> +		else if (color_data->led_color_id == LED_COLOR_ID_BLUE)
>> +			reg_color_offset = 2;
>> +		else
>> +			continue;
> This else case is quite erroneous. Sheer continue is just ignoring
> serious problem. I'd log the problem and return -EINVAL.
Ack.
>
> Also, you could have a macro for mapping color_id to offset.
If the code needed to do this more then once I could justify a macro.  
But this is the only instance of this check.
>
>> +
>> +		if (led->ctrl_bank_enabled) {
>> +			reg_val = led_chip->bank_mix_reg + reg_color_offset;
>> +		} else {
>> +			led_offset = (led->led_number * 3)  + reg_color_offset;
>> +			reg_val = led_chip->mix_out0_reg + led_offset;
>> +		}
>> +
>> +		ret = regmap_write(led->priv->regmap, reg_val,
>> +				   color_data->intensity);
>> +		if (ret) {
>> +			dev_err(&led->priv->client->dev,
>> +				"Cannot write intensity value %d\n", ret);
>> +			goto out;
>> +		}
>> +	}
>> +out:
>> +	mutex_unlock(&led->priv->lock);
>> +	return ret;
>> +}
>> +
>> +static enum led_brightness lp50xx_brightness_get(struct led_classdev *cdev)
>> +{
>> +	struct lp50xx_led *led = container_of(cdev, struct lp50xx_led, led_dev);
>> +	const struct lp50xx_chip_info *led_chip = led->priv->chip_info;
>> +	unsigned int brt_val;
>> +	u8 reg_val;
>> +	int ret;
>> +
>> +	mutex_lock(&led->priv->lock);
>> +
>> +	if (led->ctrl_bank_enabled)
>> +		reg_val = led_chip->bank_brt_reg;
>> +	else
>> +		reg_val = led_chip->led_brightness0_reg + led->led_number;
>> +
>> +	ret = regmap_read(led->priv->regmap, reg_val, &brt_val);
>> +
>> +	mutex_unlock(&led->priv->lock);
>> +
>> +	return brt_val;
>> +}
>> +
>> +static int lp50xx_set_banks(struct lp50xx *priv, u32 led_banks[])
>> +{
>> +	u8 led_config_lo, led_config_hi;
>> +	u32 bank_enable_mask = 0;
>> +	int ret;
>> +	int i;
>> +
>> +	for (i = 0; i < priv->chip_info->num_leds; i++)
>> +		bank_enable_mask |= (1 << led_banks[i]);
>> +
>> +	led_config_lo = (u8)(bank_enable_mask & 0xff);
>> +	led_config_hi = (u8)(bank_enable_mask >> 8) & 0xff;
>> +
>> +	ret = regmap_write(priv->regmap, LP50XX_LED_CFG0, led_config_lo);
>> +	if (ret)
>> +		return ret;
>> +
>> +	if (led_config_hi)
> Now I think that less questionable would be writing led_config_hi always
> for devices that have CFG1 register. IOW write led_config_hi also
> when it equals 0.

Ack.  I will have to modify the check to only write this for LP5030/36 
as those are the only 2 that have the CFG1 register.

>
>> +		ret = regmap_write(priv->regmap, LP5036_LED_CFG1,
>> +				   led_config_hi);
>> +
>> +	return ret;
>> +}
>> +
>> +static int lp50xx_reset(struct lp50xx *priv)
>> +{
>> +	if (priv->enable_gpio)
>> +		return gpiod_direction_output(priv->enable_gpio, 1);
>> +	else
>> +		return regmap_write(priv->regmap, priv->chip_info->reset_reg,
>> +				    LP50XX_SW_RESET);
>> +}
>> +
>> +static int lp50xx_enable_disable(struct lp50xx *priv, u8 enable_disable)
>> +{
>> +	return regmap_write(priv->regmap, LP50XX_DEV_CFG0, enable_disable);
>> +}
>> +
>> +static int lp50xx_probe_dt(struct lp50xx *priv)
>> +{
>> +	u32 led_banks[LP5036_MAX_LED_MODULES];
>> +	struct fwnode_handle *child = NULL;
>> +	struct fwnode_handle *led_node = NULL;
>> +	struct led_init_data init_data;
>> +	struct lp50xx_led *led;
>> +	int num_colors;
>> +	u32 color_id;
>> +	int led_number;
>> +	size_t i = 0;
>> +	int ret;
>> +
>> +	priv->enable_gpio = devm_gpiod_get_optional(&priv->client->dev,
>> +						   "enable", GPIOD_OUT_LOW);
>> +	if (IS_ERR(priv->enable_gpio)) {
>> +		ret = PTR_ERR(priv->enable_gpio);
>> +		dev_err(&priv->client->dev, "Failed to get enable gpio: %d\n",
>> +			ret);
>> +		return ret;
>> +	}
>> +
>> +	priv->regulator = devm_regulator_get(&priv->client->dev, "vled");
>> +	if (IS_ERR(priv->regulator))
>> +		priv->regulator = NULL;
>> +
>> +	device_for_each_child_node(&priv->client->dev, child) {
>> +		led = &priv->leds[i];
>> +		if (fwnode_property_present(child, "ti,led-bank")) {
>> +			ret = fwnode_property_read_u32_array(child,
>> +							     "ti,led-bank",
>> +							     NULL, 0);
>> +			ret = fwnode_property_read_u32_array(child,
>> +							     "ti,led-bank",
>> +							     led_banks,
>> +							     ret);
>> +
>> +			priv->num_of_banked_leds = ARRAY_SIZE(led_banks);
>> +
>> +			ret = lp50xx_set_banks(priv, led_banks);
>> +			if (ret) {
>> +				dev_err(&priv->client->dev,
>> +					"Cannot setup banked LEDs\n");
>> +				fwnode_handle_put(child);
>> +				goto child_out;
>> +			}
>> +			led->ctrl_bank_enabled = 1;
>> +
>> +		} else {
>> +			ret = fwnode_property_read_u32(child, "reg",
>> +					       &led_number);
> Not checking ret val?
Yes it is after the else case.  But I should probably check return for 
the led-bank
>
>> +
>> +			led->led_number = led_number;
>> +		}
>> +		if (ret) {
>> +			dev_err(&priv->client->dev,
>> +				"led sourcing property missing\n");
>> +			fwnode_handle_put(child);
>> +			goto child_out;
>> +		}
>> +

Dan

[...]


^ permalink raw reply	[flat|nested] 38+ messages in thread

* Re: [PATCH v9 08/15] dt: bindings: lp55xx: Be consistent in the document with LED
  2019-09-25 21:31   ` Jacek Anaszewski
@ 2019-09-26 12:00     ` Dan Murphy
  0 siblings, 0 replies; 38+ messages in thread
From: Dan Murphy @ 2019-09-26 12:00 UTC (permalink / raw)
  To: Jacek Anaszewski, pavel; +Cc: linux-leds, linux-kernel

Jacek

On 9/25/19 4:31 PM, Jacek Anaszewski wrote:
> Dan,
>
> On 9/25/19 7:46 PM, Dan Murphy wrote:
>> Update the document to be consistent in case when using LED.
> s/LED/"LED"/.

ACK


>
>> This should be capital throughout the document.
>>
>> Signed-off-by: Dan Murphy <dmurphy@ti.com>
>> ---
>>   Documentation/devicetree/bindings/leds/leds-lp55xx.txt | 6 +++---
>>   1 file changed, 3 insertions(+), 3 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/leds/leds-lp55xx.txt b/Documentation/devicetree/bindings/leds/leds-lp55xx.txt
>> index 1b66a413fb9d..bfe2805c5534 100644
>> --- a/Documentation/devicetree/bindings/leds/leds-lp55xx.txt
>> +++ b/Documentation/devicetree/bindings/leds/leds-lp55xx.txt
>> @@ -1,4 +1,4 @@
>> -Binding for TI/National Semiconductor LP55xx Led Drivers
>> +Binding for TI/National Semiconductor LP55xx LED Drivers
>>   
>>   Required properties:
>>   - compatible: one of
>> @@ -12,8 +12,8 @@ Required properties:
>>   - clock-mode: Input clock mode, (0: automode, 1: internal, 2: external)
>>   
>>   Each child has own specific current settings
>> -- led-cur: Current setting at each led channel (mA x10, 0 if led is not connected)
>> -- max-cur: Maximun current at each led channel.
>> +- led-cur: Current setting at each LED channel (mA x10, 0 if LED is not connected)
>> +- max-cur: Maximun current at each LED channel.
>>   
>>   Optional properties:
>>   - enable-gpio: GPIO attached to the chip's enable pin
>>

^ permalink raw reply	[flat|nested] 38+ messages in thread

* Re: [PATCH v9 09/15] dt: bindings: lp55xx: Update binding for Multicolor Framework
  2019-09-25 21:34   ` Jacek Anaszewski
@ 2019-09-26 12:00     ` Dan Murphy
  0 siblings, 0 replies; 38+ messages in thread
From: Dan Murphy @ 2019-09-26 12:00 UTC (permalink / raw)
  To: Jacek Anaszewski, pavel
  Cc: linux-leds, linux-kernel, Tony Lindgren, Benoît Cousson,
	Linus Walleij, Shawn Guo, Sascha Hauer, Pengutronix Kernel Team,
	Fabio Estevam, NXP Linux Team

Jacek

On 9/25/19 4:34 PM, Jacek Anaszewski wrote:
> Dan,
>
> On 9/25/19 7:46 PM, Dan Murphy wrote:
>> Update the DT binding to include the properties to use the
>> multicolor framework for the devices that use the LP55xx
>> framework.
>>
>> Signed-off-by: Dan Murphy <dmurphy@ti.com>
>> CC: Tony Lindgren <tony@atomide.com>
>> CC: "Benoît Cousson" <bcousson@baylibre.com>
>> CC: Linus Walleij <linus.walleij@linaro.org>
>> CC: Shawn Guo <shawnguo@kernel.org>
>> CC: Sascha Hauer <s.hauer@pengutronix.de>
>> CC: Pengutronix Kernel Team <kernel@pengutronix.de>
>> CC: Fabio Estevam <festevam@gmail.com>
>> CC: NXP Linux Team <linux-imx@nxp.com>
>> ---
>>   .../devicetree/bindings/leds/leds-lp55xx.txt  | 99 +++++++++++++++++++
>>   1 file changed, 99 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/leds/leds-lp55xx.txt b/Documentation/devicetree/bindings/leds/leds-lp55xx.txt
>> index bfe2805c5534..c120d2bde3bd 100644
>> --- a/Documentation/devicetree/bindings/leds/leds-lp55xx.txt
>> +++ b/Documentation/devicetree/bindings/leds/leds-lp55xx.txt
>> @@ -1,6 +1,8 @@
>>   Binding for TI/National Semiconductor LP55xx LED Drivers
>>   
>>   Required properties:
>> +- #address-cells: 1
>> +- #size-cells: 0
>>   - compatible: one of
>>   	national,lp5521
>>   	national,lp5523
>> @@ -14,6 +16,18 @@ Required properties:
>>   Each child has own specific current settings
>>   - led-cur: Current setting at each LED channel (mA x10, 0 if LED is not connected)
>>   - max-cur: Maximun current at each LED channel.
>> +- reg: Output channel for the LED.  This is zero based channel identifier and
>> +	the data sheet is a one based channel identifier.
>> +	reg value to output to LED output number
>> +	D1 = reg value is 0
>> +	D2 = reg value is 1
>> +	D3 = reg value is 2
>> +	D4 = reg value is 3
>> +	D5 = reg value is 4
>> +	D6 = reg value is 5
>> +	D7 = reg value is 6
>> +	D8 = reg value is 7
>> +	D9 = reg value is 8
>>   
>>   Optional properties:
>>   - enable-gpio: GPIO attached to the chip's enable pin
>> @@ -35,23 +49,28 @@ example 1) LP5521
>>   on channel 0.
>>   
>>   lp5521@32 {
>> +	#address-cells = <1>;
>> +	#size-cells = <0>;
>>   	compatible = "national,lp5521";
>>   	reg = <0x32>;
>>   	label = "lp5521_pri";
>>   	clock-mode = /bits/ 8 <2>;
>>   
>>   	chan0 {
> s/chan0/chan@0/
>
> The same applies to the remaining occurrences in this file and to
> the other patches from the patch set as already pointed out.

Ack.  I have made the same change across all the DT patches in this series

Dan


>> +		reg = <0>;
>>   		led-cur = /bits/ 8 <0x2f>;
>>   		max-cur = /bits/ 8 <0x5f>;
>>   		linux,default-trigger = "heartbeat";
>>   	};
>>

^ permalink raw reply	[flat|nested] 38+ messages in thread

* Re: [PATCH v9 13/15] leds: lp55xx: Update the lp55xx to use the multi color framework
  2019-09-25 22:00   ` Jacek Anaszewski
@ 2019-09-26 12:02     ` Dan Murphy
  2019-09-29 13:01       ` Jacek Anaszewski
  0 siblings, 1 reply; 38+ messages in thread
From: Dan Murphy @ 2019-09-26 12:02 UTC (permalink / raw)
  To: Jacek Anaszewski, pavel; +Cc: linux-leds, linux-kernel

Jacek

On 9/25/19 5:00 PM, Jacek Anaszewski wrote:
> Dan,
>
> On 9/25/19 7:46 PM, Dan Murphy wrote:
>> Update the lp5523 to allow the use of the multi color framework.
>>
>> Signed-off-by: Dan Murphy <dmurphy@ti.com>
>> ---
>>   drivers/leds/Kconfig                      |   1 +
>>   drivers/leds/leds-lp5523.c                |  13 ++
>>   drivers/leds/leds-lp55xx-common.c         | 150 ++++++++++++++++++----
>>   drivers/leds/leds-lp55xx-common.h         |  11 ++
>>   include/linux/platform_data/leds-lp55xx.h |   6 +
>>   5 files changed, 157 insertions(+), 24 deletions(-)
>>
>> diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
>> index 84f60e35c5ee..dc3d9f2194cd 100644
>> --- a/drivers/leds/Kconfig
>> +++ b/drivers/leds/Kconfig
>> @@ -377,6 +377,7 @@ config LEDS_LP50XX
>>   config LEDS_LP55XX_COMMON
>>   	tristate "Common Driver for TI/National LP5521/5523/55231/5562/8501"
>>   	depends on LEDS_LP5521 || LEDS_LP5523 || LEDS_LP5562 || LEDS_LP8501
>> +	depends on LEDS_CLASS_MULTI_COLOR && OF
>>   	select FW_LOADER
>>   	select FW_LOADER_USER_HELPER
>>   	help
>> diff --git a/drivers/leds/leds-lp5523.c b/drivers/leds/leds-lp5523.c
>> index d0b931a136b9..8b2cdb98fed6 100644
>> --- a/drivers/leds/leds-lp5523.c
>> +++ b/drivers/leds/leds-lp5523.c
>> @@ -791,6 +791,18 @@ static ssize_t store_master_fader_leds(struct device *dev,
>>   	return ret;
>>   }
>>   
>> +static int lp5523_led_intensity(struct lp55xx_led *led, int chan_num)
> Why do we need this function? brightness op will not suffice?

I looked at this before sending it in.  This API adds the chan_num to 
write to.

The brightness_fn does not it takes it from the led structure.

>
>> +{
>> +	struct lp55xx_chip *chip = led->chip;
>> +	int ret;
>> +
>> +	mutex_lock(&chip->lock);
>> +	ret = lp55xx_write(chip, LP5523_REG_LED_PWM_BASE + chan_num,
>> +		     led->brightness);
>> +	mutex_unlock(&chip->lock);
>> +	return ret;
>> +}
>> +
>>   static int lp5523_led_brightness(struct lp55xx_led *led)
>>   {
>>   	struct lp55xx_chip *chip = led->chip;
>> @@ -857,6 +869,7 @@ static struct lp55xx_device_config lp5523_cfg = {
>>   	.max_channel  = LP5523_MAX_LEDS,
>>   	.post_init_device   = lp5523_post_init_device,
>>   	.brightness_fn      = lp5523_led_brightness,
>> +	.color_intensity_fn = lp5523_led_intensity,
>>   	.set_led_current    = lp5523_set_led_current,
>>   	.firmware_cb        = lp5523_firmware_loaded,
>>   	.run_engine         = lp5523_run_engine,
>> diff --git a/drivers/leds/leds-lp55xx-common.c b/drivers/leds/leds-lp55xx-common.c
>> index 44ced02b49f9..0e4b3a9d3047 100644
>> --- a/drivers/leds/leds-lp55xx-common.c
>> +++ b/drivers/leds/leds-lp55xx-common.c
>> @@ -136,9 +136,26 @@ static int lp55xx_set_brightness(struct led_classdev *cdev,
>>   {
>>   	struct lp55xx_led *led = cdev_to_lp55xx_led(cdev);
>>   	struct lp55xx_device_config *cfg = led->chip->cfg;
>> +	int brightness_val[LP55XX_MAX_GROUPED_CHAN];
>> +	int ret;
>> +	int i;
>> +
>> +	if (led->mc_cdev.num_leds > 1) {
>> +		led_mc_calc_brightness(&led->mc_cdev,
>> +				       brightness, brightness_val);
>> +		for (i = 0; i < led->mc_cdev.num_leds; i++) {
>> +			led->brightness = brightness_val[i];
>> +			ret = cfg->color_intensity_fn(led,
>> +						      led->grouped_channels[i]);
> Now we will have three separate calls for each color component
> (and possibly sleeping on mutex on contention).
>
> Probably LED mc class use case will need a bit different design.
>
> Also, instead of grouped_channels we could possibly have
>
> led_mc_get_color_id(&led->mc_dev, i)
color_id and grouped_channels are not a 1:1 mapping
>
> which would map entry position index to color_id.
>
> I will stop reviewing here and will continue after taking
> deeper look at this lp55xx design.
>

Dan


^ permalink raw reply	[flat|nested] 38+ messages in thread

* Re: [PATCH v9 01/15] leds: multicolor: Add sysfs interface definition
  2019-09-26 11:10   ` Pavel Machek
@ 2019-09-26 12:08     ` Dan Murphy
  0 siblings, 0 replies; 38+ messages in thread
From: Dan Murphy @ 2019-09-26 12:08 UTC (permalink / raw)
  To: Pavel Machek
  Cc: jacek.anaszewski, linux-leds, linux-kernel, linus.walleij,
	shawnguo, Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam,
	NXP Linux Team, Tony Lindgren, Benoît Cousson

Pavel

On 9/26/19 6:10 AM, Pavel Machek wrote:
> Hi!
>
>> diff --git a/Documentation/leds/leds-class-multicolor.rst b/Documentation/leds/leds-class-multicolor.rst
>> new file mode 100644
>> index 000000000000..87a1588d7619
>> --- /dev/null
>> +++ b/Documentation/leds/leds-class-multicolor.rst
>> @@ -0,0 +1,96 @@
>> +====================================
>> +Multi Color LED handling under Linux
>> +====================================
>> +
>> +Description
>> +===========
>> +The multi color class groups monochrome LEDs and allows controlling two
>> +aspects of the final combined color: hue and lightness. The former is
>> +controlled via <color>_intensity files and the latter is controlled
>> +via brightness file.
>> +
>> +For more details on hue and lightness notions please refer to
>> +https://en.wikipedia.org/wiki/CIECAM02.
>> +
>> +Note that intensity files only cache the written value and the actual
>> +change of hardware state occurs upon writing brightness file. This
>> +allows for changing many factors of the perceived color in a virtually
>> +unnoticeable way for the human observer.
> So unlike previous versions, userspace will need to write 4 files
> instead of one in the common case.

Request was made here in v5 of the patchset

https://lore.kernel.org/patchwork/patch/1126685/


>
>> +Directory Layout Example
>> +========================
>> +root:/sys/class/leds/rgb:grouped_leds# ls -lR colors/
>> +-rw-rwxr-- 1 root root 4096 Jul 7 03:10 red_max_intensity
>> +--w--wx-w- 1 root root 4096 Jul 7 03:10 red_intensity
>> +-rw-rwxr-- 1 root root 4096 Jul 7 03:10 green_max_intensity
>> +--w--wx-w- 1 root root 4096 Jul 7 03:10 green_intensity
>> +-rw-rwxr-- 1 root root 4096 Jul 7 03:10 blue_max_intensity
>> +--w--wx-w- 1 root root 4096 Jul 7 03:10 blue_intensity
> Permissions are way off here.
Yes Jacek made a comment in the code about octals.
>
>> +A user first writes the color LED brightness file with the brightness level that
>> +is necessary to achieve a blueish violet output from the RGB LED group.
>> +
>> +echo 138 > /sys/class/leds/rgb:grouped_leds/red_intensity
>> +echo 43 > /sys/class/leds/rgb:grouped_leds/green_intensity
>> +echo 226 > /sys/class/leds/rgb:grouped_leds/blue_intensity
> No, you can't tell what kind of color this will result in.

I tested this combination on two devices (LP5523 and LP50xx) and it was 
a blueish violet.

> Will you be on ELCE/OSS in Lyon?

Unfortunately no.

Dan

>
> Best regards,
> 									Pavel
>

^ permalink raw reply	[flat|nested] 38+ messages in thread

* Re: [PATCH v9 05/15] leds: multicolor: Introduce a multicolor class definition
  2019-09-26 11:52     ` Dan Murphy
@ 2019-09-28 10:09       ` Jacek Anaszewski
  2019-09-28 18:31         ` Jacek Anaszewski
  0 siblings, 1 reply; 38+ messages in thread
From: Jacek Anaszewski @ 2019-09-28 10:09 UTC (permalink / raw)
  To: Dan Murphy, pavel; +Cc: linux-leds, linux-kernel

Dan,

On 9/26/19 1:52 PM, Dan Murphy wrote:
> Jacek
> 
> On 9/25/19 4:12 PM, Jacek Anaszewski wrote:
>> Dan,
>>
>> On 9/25/19 7:46 PM, Dan Murphy wrote:
>>> Introduce a multicolor class that groups colored LEDs
>>> within a LED node.
>>>
>>> The multi color class groups monochrome LEDs and allows controlling two
>>> aspects of the final combined color: hue and lightness. The former is
>>> controlled via <color>_intensity files and the latter is controlled
>>> via brightness file.
>>>
>>> Signed-off-by: Dan Murphy <dmurphy@ti.com>
>>> ---
>>>   drivers/leds/Kconfig                 |  10 ++
>>>   drivers/leds/Makefile                |   1 +
>>>   drivers/leds/led-class-multicolor.c  | 220 +++++++++++++++++++++++++++
>>>   include/linux/led-class-multicolor.h |  74 +++++++++
>>>   4 files changed, 305 insertions(+)
>>>   create mode 100644 drivers/leds/led-class-multicolor.c
>>>   create mode 100644 include/linux/led-class-multicolor.h
>>>
>>> diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
>>> index 6e7703fd03d0..cfb1ebb6517f 100644
>>> --- a/drivers/leds/Kconfig
>>> +++ b/drivers/leds/Kconfig
>>> @@ -30,6 +30,16 @@ config LEDS_CLASS_FLASH
>>>         for the flash related features of a LED device. It can be built
>>>         as a module.
>>>   +config LEDS_CLASS_MULTI_COLOR
>>> +    tristate "LED Mulit Color LED Class Support"
>>> +    depends on LEDS_CLASS
>>> +    help
>>> +      This option enables the multicolor LED sysfs class in
>>> /sys/class/leds.
>>> +      It wraps LED class and adds multicolor LED specific sysfs
>>> attributes
>>> +      and kernel internal API to it. You'll need this to provide
>>> support
>>> +      for multicolor LEDs that are grouped together. This class is not
>>> +      intended for single color LEDs. It can be built as a module.
>>> +
>>>   config LEDS_BRIGHTNESS_HW_CHANGED
>>>       bool "LED Class brightness_hw_changed attribute support"
>>>       depends on LEDS_CLASS
>>> diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
>>> index 2da39e896ce8..841038cfe35b 100644
>>> --- a/drivers/leds/Makefile
>>> +++ b/drivers/leds/Makefile
>>> @@ -4,6 +4,7 @@
>>>   obj-$(CONFIG_NEW_LEDS)            += led-core.o
>>>   obj-$(CONFIG_LEDS_CLASS)        += led-class.o
>>>   obj-$(CONFIG_LEDS_CLASS_FLASH)        += led-class-flash.o
>>> +obj-$(CONFIG_LEDS_CLASS_MULTI_COLOR)    += led-class-multicolor.o
>>>   obj-$(CONFIG_LEDS_TRIGGERS)        += led-triggers.o
>>>     # LED Platform Drivers
>>> diff --git a/drivers/leds/led-class-multicolor.c
>>> b/drivers/leds/led-class-multicolor.c
>>> new file mode 100644
>>> index 000000000000..25371bd9a860
>>> --- /dev/null
>>> +++ b/drivers/leds/led-class-multicolor.c
>>> @@ -0,0 +1,220 @@
>>> +// SPDX-License-Identifier: GPL-2.0
>>> +// LED Multi Color class interface
>>> +// Copyright (C) 2019 Texas Instruments Incorporated -
>>> http://www.ti.com/
>>> +
>>> +#include <linux/device.h>
>>> +#include <linux/init.h>
>>> +#include <linux/led-class-multicolor.h>
>>> +#include <linux/module.h>
>>> +#include <linux/slab.h>
>>> +#include <linux/uaccess.h>
>>> +
>>> +#include "leds.h"
>>> +
>>> +#define INTENSITY_NAME        "_intensity"
>>> +#define MAX_INTENSITY_NAME    "_max_intensity"
>>> +
>>> +void led_mc_calc_brightness(struct led_classdev_mc *mcled_cdev,
>>> +                enum led_brightness brightness,
>>> +                int brightness_val[])
>>> +{
>>> +    struct led_mc_color_entry *priv;
>>> +    int i = 0;
>>> +
>>> +    list_for_each_entry(priv, &mcled_cdev->color_list, list) {
>> I think we should have some way to let the caller know exact mapping
>> of brightness_val to color_id. Possibly LED mc core should provide
>> a helper to get color_id by color entry index.
> 
> Why would we need that?

To make LED mc API more straightforward and avoid making
clients wondering in what order colors will be assigned to array
elements. And finally forcing them to go and analyze LED mc core.

>> But this remark is actually more relevant to the place of calling.
>> I'll try to propose something there.
>>
>> And regarding brightness_val name - how about:
>>
>> s/brightness_val/brightness_component/ ?
> 
> component does not make sense to me in this context.  Actually
> brightness_val
> 
> does not make sense either since it is an adjusted intensity and
> brightness is passed in in the second arg
> 
> I think intensity_values make more sense.

Every variable carries some value. so this is meaningless.
Intensity OTOH can be confused with <color>_intensity, which
is not going to be written to the hardware, but used
as a factor for calculating final LED iout brightness.

The aim of the equation is to multiple the ratio of
color intensity to its max intensity by global brightness.
The resulting value is written to the hardware to set
brightness of a LED being one of the components producing
the final final combined color.

I had to come up with literal description of the equation
to facilitate devising better variable name :-)

Having the above, how about "color_component" ?

>>
>>
>>> +        brightness_val[i] = brightness *
>>> +                    priv->intensity / priv->max_intensity;

Now, looking closer at this equation it becomes obvious to me
why Pavel opted for common max_brightness: in case of
<color>_intensity == <color>_max_intensity we will get the result
equal to max_brightness. And this is problematic: think of a case when
calculated value will be greater than given <color>_max_intensity.
It will have to be limited the that constraint and will fail to
produce proper color combination.

As a solution I see limiting max_brightness to the lowest supported
brightness from the LEDs in the cluster.

>>> +        i++;
>>> +    }
>>> +}
>>> +EXPORT_SYMBOL_GPL(led_mc_calc_brightness);
>>> +
>>> +static ssize_t intensity_store(struct device *dev,
>>> +                struct device_attribute *intensity_attr,
>>> +                const char *buf, size_t size)
>>> +{
>>> +    struct led_mc_color_entry *priv = container_of(intensity_attr,
>>> +                            struct led_mc_color_entry,
>>> +                              intensity_attr);
>>> +    struct led_classdev *led_cdev = priv->mcled_cdev->led_cdev;
>>> +    unsigned long value;
>>> +    ssize_t ret;
>>> +
>>> +    mutex_lock(&led_cdev->led_access);
>>> +
>>> +    ret = kstrtoul(buf, 10, &value);
>>> +    if (ret)
>>> +        goto unlock;
>>> +
>>> +    if (value > priv->max_intensity) {
>>> +        ret = -EINVAL;
>>> +        goto unlock;
>>> +    }
>>> +
>>> +    priv->intensity = value;
>>> +    ret = size;
>>> +
>>> +unlock:
>>> +    mutex_unlock(&led_cdev->led_access);
>>> +    return ret;
>>> +}
>>> +
>>> +static ssize_t intensity_show(struct device *dev,
>>> +                  struct device_attribute *intensity_attr,
>>> +                  char *buf)
>>> +{
>>> +    struct led_mc_color_entry *priv = container_of(intensity_attr,
>>> +                            struct led_mc_color_entry,
>>> +                              intensity_attr);
>>> +
>>> +    return sprintf(buf, "%d\n", priv->intensity);
>>> +}
>>> +
>>> +static ssize_t max_intensity_show(struct device *dev,
>>> +                   struct device_attribute *max_intensity_attr,
>>> +                   char *buf)
>>> +{
>>> +    struct led_mc_color_entry *priv = container_of(max_intensity_attr,
>>> +                            struct led_mc_color_entry,
>>> +                              max_intensity_attr);
>>> +
>>> +    return sprintf(buf, "%d\n", priv->max_intensity);
>>> +}
>>> +
>>> +static struct attribute *led_color_attrs[] = {
>>> +    NULL,
>>> +};
>>> +
>>> +static struct attribute_group led_color_group = {
>>> +    .name = "colors",
>>> +    .attrs = led_color_attrs,
>>> +};
>>> +
>>> +static int led_multicolor_init_color(struct led_classdev_mc
>>> *mcled_cdev,
>>> +                     int color_id, int color_index)
>>> +{
>>> +    struct led_classdev *led_cdev = mcled_cdev->led_cdev;
>>> +    struct led_mc_color_entry *mc_priv;
>>> +    char *intensity_file_name;
>>> +    char *max_intensity_file_name;
>>> +    size_t len;
>>> +    int ret;
>>> +
>>> +    mc_priv = devm_kzalloc(led_cdev->dev, sizeof(*mc_priv),
>>> GFP_KERNEL);
>>> +    if (!mc_priv)
>>> +        return -ENOMEM;
>>> +
>>> +    mc_priv->led_color_id = color_id;
>>> +    mc_priv->mcled_cdev = mcled_cdev;
>>> +
>>> +    sysfs_attr_init(&mc_priv->intensity_attr.attr);
>>> +    len = strlen(led_colors[color_id]) + strlen(INTENSITY_NAME) + 1;
>>> +    intensity_file_name = kzalloc(len, GFP_KERNEL);
>>> +    if (!intensity_file_name)
>>> +        return -ENOMEM;
>>> +
>>> +    snprintf(intensity_file_name, len, "%s%s",
>>> +         led_colors[color_id], INTENSITY_NAME);
>>> +    mc_priv->intensity_attr.attr.name = intensity_file_name;
>>> +    mc_priv->intensity_attr.attr.mode = 644;
>> Proper octal value should begin with 0.
>> But please use combinations of dedicated S_I* definitions
>> from include/uapi/linux/stat.h.
> 
> Using the S_I* causes checkpatch warnings
> 
> WARNING: Symbolic permissions 'S_IRUGO' are not preferred. Consider
> using octal permissions '0444'.
> #139: FILE: drivers/leds/led-class-multicolor.c:139:
> +    mc_priv->max_intensity_attr.attr.mode = S_IRUGO;

Ah, right. Anyway, you need to add leading 0.

>>
>>> +    mc_priv->intensity_attr.store = intensity_store;
>>> +    mc_priv->intensity_attr.show = intensity_show;
>>> +    ret = sysfs_add_file_to_group(&led_cdev->dev->kobj,
>>> +                      &mc_priv->intensity_attr.attr,
>>> +                      led_color_group.name);
>>> +    if (ret)
>>> +        goto intensity_err_out;
>>> +
>>> +    sysfs_attr_init(&mc_priv->max_intensity_attr.attr);
>>> +    len = strlen(led_colors[color_id]) + strlen(MAX_INTENSITY_NAME)
>>> + 1;
>>> +    max_intensity_file_name = kzalloc(len, GFP_KERNEL);
>>> +    if (!max_intensity_file_name) {
>>> +        ret = -ENOMEM;
>>> +        goto intensity_err_out;
>>> +    }
>>> +
>>> +    snprintf(max_intensity_file_name, len, "%s%s",
>>> +         led_colors[color_id], MAX_INTENSITY_NAME);
>>> +    mc_priv->max_intensity_attr.attr.name = max_intensity_file_name;
>>> +    mc_priv->max_intensity_attr.attr.mode = 444;
>>> +    mc_priv->max_intensity_attr.show = max_intensity_show;
>>> +    ret = sysfs_add_file_to_group(&led_cdev->dev->kobj,
>>> +                      &mc_priv->max_intensity_attr.attr,
>>> +                      led_color_group.name);
>>> +    if (ret)
>>> +        goto max_intensity_err_out;
>>> +
>>> +    mc_priv->max_intensity = LED_FULL;
>>> +    list_add_tail(&mc_priv->list, &mcled_cdev->color_list);
>>> +
>>> +max_intensity_err_out:
>>> +    kfree(max_intensity_file_name);
>>> +intensity_err_out:
>>> +    kfree(intensity_file_name);
>>> +    return ret;
>>> +}
>>> +
>>> +static int led_multicolor_init_color_dir(struct led_classdev_mc
>>> *mcled_cdev)
>>> +{
>>> +    struct led_classdev *led_cdev = mcled_cdev->led_cdev;
>>> +    int ret;
>>> +    int i, color_index = 0;
>>> +
>>> +    ret = sysfs_create_group(&led_cdev->dev->kobj, &led_color_group);
>>> +    if (ret)
>>> +        return ret;
>>> +
>>> +    for (i = 0; i < LED_COLOR_ID_MAX; i++) {
>>> +        if (test_bit(i, &mcled_cdev->available_colors)) {
>>> +            ret = led_multicolor_init_color(mcled_cdev, i,
>>> +                            color_index);
>> color_index is now unused AFAICS.
> 
> Ack
> 
>>
>>> +            if (ret)
>>> +                break;
>>> +
>>> +            color_index++;
>>> +        }
>>> +    }
>>> +
>>> +    return ret;
>>> +}
>>> +
>>> +int led_classdev_multicolor_register_ext(struct device *parent,
>>> +                     struct led_classdev_mc *mcled_cdev,
>>> +                     struct led_init_data *init_data)
>>> +{
>>> +    struct led_classdev *led_cdev;
>>> +    int ret;
>>> +
>>> +    if (!mcled_cdev)
>>> +        return -EINVAL;
>>> +
>>> +    led_cdev = mcled_cdev->led_cdev;
>>> +    INIT_LIST_HEAD(&mcled_cdev->color_list);
>>> +
>>> +    /* Register led class device */
>>> +    ret = led_classdev_register_ext(parent, led_cdev, init_data);
>>> +    if (ret)
>>> +        return ret;
>>> +
>>> +    return led_multicolor_init_color_dir(mcled_cdev);
>>> +}
>>> +EXPORT_SYMBOL_GPL(led_classdev_multicolor_register_ext);
>> Why devm_* versions are missing now?
> 
> I was using the led-class-flash.c as an example and that class does not
> have the devm_* versions either.

Why did you have them in v8 then?

> Tried to make the 2 child classes look the same.

We can fix the shortcomings while adding new code.

> If they are missing from the led-class-flash code then that needs to be
> fixed as well.

Well, yes.

>>
>>> +
>>> +void led_classdev_multicolor_unregister(struct led_classdev_mc
>>> *mcled_cdev)
>>> +{
>>> +    struct led_mc_color_entry *priv, *next;
>>> +
>>> +    if (!mcled_cdev)
>>> +        return;
>>> +
>>> +    list_for_each_entry_safe(priv, next, &mcled_cdev->color_list, list)
>>> +        list_del(&priv->list);
>>> +
>>> +    sysfs_remove_group(&mcled_cdev->led_cdev->dev->kobj,
>>> &led_color_group);
>>> +    led_classdev_unregister(mcled_cdev->led_cdev);
>>> +}
>>> +EXPORT_SYMBOL_GPL(led_classdev_multicolor_unregister);
>>> +
>>> +MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com>");
>>> +MODULE_DESCRIPTION("Multi Color LED class interface");
>>> +MODULE_LICENSE("GPL v2");
>>> diff --git a/include/linux/led-class-multicolor.h
>>> b/include/linux/led-class-multicolor.h
>>> new file mode 100644
>>> index 000000000000..280ba5a614b4
>>> --- /dev/null
>>> +++ b/include/linux/led-class-multicolor.h
>>> @@ -0,0 +1,74 @@
>>> +/* SPDX-License-Identifier: GPL-2.0 */
>>> +/* LED Multicolor class interface
>>> + * Copyright (C) 2019 Texas Instruments Incorporated -
>>> http://www.ti.com/
>>> + */
>>> +
>>> +#ifndef __LINUX_MULTICOLOR_LEDS_H_INCLUDED
>>> +#define __LINUX_MULTICOLOR_LEDS_H_INCLUDED
>>> +
>>> +#include <linux/leds.h>
>>> +#include <dt-bindings/leds/common.h>
>>> +
>>> +struct led_classdev_mc;
>>> +
>>> +struct led_mc_color_entry {
>>> +    struct led_classdev_mc *mcled_cdev;
>>> +
>>> +    struct device_attribute max_intensity_attr;
>>> +    struct device_attribute intensity_attr;
>>> +
>>> +    enum led_brightness max_intensity;
>>> +    enum led_brightness intensity;
>>> +
>>> +    struct list_head list;
>>> +
>>> +    int led_color_id;
>>> +};
>>> +
>>> +struct led_classdev_mc {
>>> +    /* led class device */
>>> +    struct led_classdev *led_cdev;
>>> +    struct list_head color_list;
>>> +
>>> +    unsigned long available_colors;
>>> +    int num_leds;
>>> +};
>>> +
>>> +static inline struct led_classdev_mc *lcdev_to_mccdev(
>>> +                        struct led_classdev *lcdev)
>>> +{
>>> +    return container_of(lcdev, struct led_classdev_mc, led_cdev);
>>> +}
>>> +
>>> +/**
>>> + * led_classdev_multicolor_register_ext - register a new object of
>>> led_classdev
>>> + *                      class with support for multicolor LEDs
>>> + * @parent: the multicolor LED to register
>>> + * @mcled_cdev: the led_classdev_mc structure for this device
>>> + * @init_data: the LED class Multi color device initialization data
>>> + *
>>> + * Returns: 0 on success or negative error value on failure
>>> + */
>>> +int led_classdev_multicolor_register_ext(struct device *parent,
>>> +                        struct led_classdev_mc *mcled_cdev,
>>> +                        struct led_init_data *init_data);
>>> +
>>> +#define led_classdev_multicolor_register(parent, mcled_cdev)        \
>>> +    led_classdev_multicolor_register_ext(parent, mcled_cdev, NULL)
>> Please turn it into inline.
> 
> Again same statement as above on the led-class-flash.  This is how this
> is defined there.
> 
> If that is not correct in the flash class then that needs to be fixed as
> well.

Did you see my patch fixing these things in leds.h [0]?
I just missed that problem in led-class-flash.h.

>>> +
>>> +/**
>>> + * led_classdev_multicolor_unregister - unregisters an object of
>>> led_classdev
>>> + *                    class with support for multicolor LEDs
>>> + * @mcled_cdev: the multicolor LED to unregister
>>> + *
>>> + * Unregister a previously registered via
>>> led_classdev_multicolor_register
>>> + * object
>>> + */
>>> +void led_classdev_multicolor_unregister(struct led_classdev_mc
>>> *mcled_cdev);
>>> +
>>> +/* Calculate brightness for the monochrome LED cluster */
>>> +void led_mc_calc_brightness(struct led_classdev_mc *mcled_cdev,
>>> +                enum led_brightness brightness,
>>> +                int brightness_val[]);
>>> +
>>> +#endif    /* __LINUX_MULTICOLOR_LEDS_H_INCLUDED */
>>>
> 

[0]
https://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds.git/commit/?h=for-next&id=7c322056e3564da1b5bdc3f3cb79229582955eb2

-- 
Best regards,
Jacek Anaszewski

^ permalink raw reply	[flat|nested] 38+ messages in thread

* Re: [PATCH v9 07/15] leds: lp50xx: Add the LP50XX family of the RGB LED driver
  2019-09-26 11:59     ` Dan Murphy
@ 2019-09-28 10:29       ` Jacek Anaszewski
  0 siblings, 0 replies; 38+ messages in thread
From: Jacek Anaszewski @ 2019-09-28 10:29 UTC (permalink / raw)
  To: Dan Murphy, pavel; +Cc: linux-leds, linux-kernel

Dan,

On 9/26/19 1:59 PM, Dan Murphy wrote:
> Jacek
> 
> On 9/25/19 4:27 PM, Jacek Anaszewski wrote:
>> Dan,
>>
>> On 9/25/19 7:46 PM, Dan Murphy wrote:
> 
> <big_snip>
> 
>>> +
>>> +static int lp50xx_brightness_set(struct led_classdev *cdev,
>>> +                 enum led_brightness brightness)
>>> +{
>>> +    struct lp50xx_led *led = container_of(cdev, struct lp50xx_led,
>>> led_dev);
>>> +    const struct lp50xx_chip_info *led_chip = led->priv->chip_info;
>>> +    struct led_mc_color_entry *color_data;
>>> +    u8 led_offset, reg_val, reg_color_offset;
>>> +    int ret = 0;
>>> +
>>> +    mutex_lock(&led->priv->lock);
>>> +
>>> +    if (led->ctrl_bank_enabled)
>>> +        reg_val = led_chip->bank_brt_reg;
>>> +    else
>>> +        reg_val = led_chip->led_brightness0_reg +
>>> +              led->led_number;
>>> +
>>> +    ret = regmap_write(led->priv->regmap, reg_val, brightness);
>>> +    if (ret) {
>>> +        dev_err(&led->priv->client->dev,
>>> +            "Cannot write brightness value %d\n", ret);
>>> +        goto out;
>>> +    }
>>> +
>>> +    list_for_each_entry(color_data, &led->mc_cdev.color_list, list) {
>>> +        if (color_data->led_color_id == LED_COLOR_ID_RED)
>>> +            reg_color_offset = 0;
>>> +        else if (color_data->led_color_id == LED_COLOR_ID_GREEN)
>>> +            reg_color_offset = 1;
>>> +        else if (color_data->led_color_id == LED_COLOR_ID_BLUE)
>>> +            reg_color_offset = 2;
>>> +        else
>>> +            continue;
>> This else case is quite erroneous. Sheer continue is just ignoring
>> serious problem. I'd log the problem and return -EINVAL.
> Ack.
>>
>> Also, you could have a macro for mapping color_id to offset.
> If the code needed to do this more then once I could justify a macro. 
> But this is the only instance of this check.

OK, at first glance I thought we could have a formula for that,
but this is not the case.

-- 
Best regards,
Jacek Anaszewski

^ permalink raw reply	[flat|nested] 38+ messages in thread

* Re: [PATCH v9 05/15] leds: multicolor: Introduce a multicolor class definition
  2019-09-28 10:09       ` Jacek Anaszewski
@ 2019-09-28 18:31         ` Jacek Anaszewski
  0 siblings, 0 replies; 38+ messages in thread
From: Jacek Anaszewski @ 2019-09-28 18:31 UTC (permalink / raw)
  To: Dan Murphy, pavel; +Cc: linux-leds, linux-kernel

On 9/28/19 12:09 PM, Jacek Anaszewski wrote:
> Dan,
[...]
>>>
>>>
>>>> +        brightness_val[i] = brightness *
>>>> +                    priv->intensity / priv->max_intensity;
> 
> Now, looking closer at this equation it becomes obvious to me
> why Pavel opted for common max_brightness: in case of
> <color>_intensity == <color>_max_intensity we will get the result
> equal to max_brightness. And this is problematic: think of a case when
> calculated value will be greater than given <color>_max_intensity.
> It will have to be limited the that constraint and will fail to

s/the that/to that/

> produce proper color combination.
> 
> As a solution I see limiting max_brightness to the lowest supported
> brightness from the LEDs in the cluster.

A re-thinking that I withdraw this idea since it will not allow to lit
all LEDs to their max brightness values. Probably we will need just
document that only when all LEDs have the same brightness range the
combined brightness will preserve the hue on the whole its span.

-- 
Best regards,
Jacek Anaszewski

^ permalink raw reply	[flat|nested] 38+ messages in thread

* Re: [PATCH v9 13/15] leds: lp55xx: Update the lp55xx to use the multi color framework
  2019-09-26 12:02     ` Dan Murphy
@ 2019-09-29 13:01       ` Jacek Anaszewski
  2019-09-30 16:31         ` Dan Murphy
  0 siblings, 1 reply; 38+ messages in thread
From: Jacek Anaszewski @ 2019-09-29 13:01 UTC (permalink / raw)
  To: Dan Murphy, pavel; +Cc: linux-leds, linux-kernel

Dan,

On 9/26/19 2:02 PM, Dan Murphy wrote:
> Jacek
> 
> On 9/25/19 5:00 PM, Jacek Anaszewski wrote:
>> Dan,
>>
>> On 9/25/19 7:46 PM, Dan Murphy wrote:
>>> Update the lp5523 to allow the use of the multi color framework.
>>>
>>> Signed-off-by: Dan Murphy <dmurphy@ti.com>
>>> ---
>>>   drivers/leds/Kconfig                      |   1 +
>>>   drivers/leds/leds-lp5523.c                |  13 ++
>>>   drivers/leds/leds-lp55xx-common.c         | 150 ++++++++++++++++++----
>>>   drivers/leds/leds-lp55xx-common.h         |  11 ++
>>>   include/linux/platform_data/leds-lp55xx.h |   6 +
>>>   5 files changed, 157 insertions(+), 24 deletions(-)
>>>
>>> diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
>>> index 84f60e35c5ee..dc3d9f2194cd 100644
>>> --- a/drivers/leds/Kconfig
>>> +++ b/drivers/leds/Kconfig
>>> @@ -377,6 +377,7 @@ config LEDS_LP50XX
>>>   config LEDS_LP55XX_COMMON
>>>       tristate "Common Driver for TI/National
>>> LP5521/5523/55231/5562/8501"
>>>       depends on LEDS_LP5521 || LEDS_LP5523 || LEDS_LP5562 ||
>>> LEDS_LP8501
>>> +    depends on LEDS_CLASS_MULTI_COLOR && OF
>>>       select FW_LOADER
>>>       select FW_LOADER_USER_HELPER
>>>       help
>>> diff --git a/drivers/leds/leds-lp5523.c b/drivers/leds/leds-lp5523.c
>>> index d0b931a136b9..8b2cdb98fed6 100644
>>> --- a/drivers/leds/leds-lp5523.c
>>> +++ b/drivers/leds/leds-lp5523.c
>>> @@ -791,6 +791,18 @@ static ssize_t store_master_fader_leds(struct
>>> device *dev,
>>>       return ret;
>>>   }
>>>   +static int lp5523_led_intensity(struct lp55xx_led *led, int chan_num)
>> Why do we need this function? brightness op will not suffice?
> 
> I looked at this before sending it in.  This API adds the chan_num to
> write to.
> 
> The brightness_fn does not it takes it from the led structure.
> 
>>
>>> +{
>>> +    struct lp55xx_chip *chip = led->chip;
>>> +    int ret;
>>> +
>>> +    mutex_lock(&chip->lock);
>>> +    ret = lp55xx_write(chip, LP5523_REG_LED_PWM_BASE + chan_num,
>>> +             led->brightness);
>>> +    mutex_unlock(&chip->lock);
>>> +    return ret;
>>> +}
>>> +
>>>   static int lp5523_led_brightness(struct lp55xx_led *led)
>>>   {
>>>       struct lp55xx_chip *chip = led->chip;
>>> @@ -857,6 +869,7 @@ static struct lp55xx_device_config lp5523_cfg = {
>>>       .max_channel  = LP5523_MAX_LEDS,
>>>       .post_init_device   = lp5523_post_init_device,
>>>       .brightness_fn      = lp5523_led_brightness,
>>> +    .color_intensity_fn = lp5523_led_intensity,
>>>       .set_led_current    = lp5523_set_led_current,
>>>       .firmware_cb        = lp5523_firmware_loaded,
>>>       .run_engine         = lp5523_run_engine,
>>> diff --git a/drivers/leds/leds-lp55xx-common.c
>>> b/drivers/leds/leds-lp55xx-common.c
>>> index 44ced02b49f9..0e4b3a9d3047 100644
>>> --- a/drivers/leds/leds-lp55xx-common.c
>>> +++ b/drivers/leds/leds-lp55xx-common.c
>>> @@ -136,9 +136,26 @@ static int lp55xx_set_brightness(struct
>>> led_classdev *cdev,
>>>   {
>>>       struct lp55xx_led *led = cdev_to_lp55xx_led(cdev);
>>>       struct lp55xx_device_config *cfg = led->chip->cfg;
>>> +    int brightness_val[LP55XX_MAX_GROUPED_CHAN];
>>> +    int ret;
>>> +    int i;
>>> +
>>> +    if (led->mc_cdev.num_leds > 1) {
>>> +        led_mc_calc_brightness(&led->mc_cdev,
>>> +                       brightness, brightness_val);
>>> +        for (i = 0; i < led->mc_cdev.num_leds; i++) {
>>> +            led->brightness = brightness_val[i];
>>> +            ret = cfg->color_intensity_fn(led,
>>> +                              led->grouped_channels[i]);
>> Now we will have three separate calls for each color component
>> (and possibly sleeping on mutex on contention).
>>
>> Probably LED mc class use case will need a bit different design.
>>
>> Also, instead of grouped_channels we could possibly have
>>
>> led_mc_get_color_id(&led->mc_dev, i)
> color_id and grouped_channels are not a 1:1 mapping

OK, they're channel numbers.

>> which would map entry position index to color_id.
>>
>> I will stop reviewing here and will continue after taking
>> deeper look at this lp55xx design.

I've analyzed that design in greater detail and have started
to wonder why you can't pass two arrays to the new op:
channel numbers and corresponding calculated channel intensities?

-- 
Best regards,
Jacek Anaszewski

^ permalink raw reply	[flat|nested] 38+ messages in thread

* Re: [PATCH v9 13/15] leds: lp55xx: Update the lp55xx to use the multi color framework
  2019-09-29 13:01       ` Jacek Anaszewski
@ 2019-09-30 16:31         ` Dan Murphy
  2019-09-30 20:34           ` Dan Murphy
  0 siblings, 1 reply; 38+ messages in thread
From: Dan Murphy @ 2019-09-30 16:31 UTC (permalink / raw)
  To: Jacek Anaszewski, pavel; +Cc: linux-leds, linux-kernel

Jacek

On 9/29/19 8:01 AM, Jacek Anaszewski wrote:
> Dan,
>
> On 9/26/19 2:02 PM, Dan Murphy wrote:
>> Jacek
>>
>> On 9/25/19 5:00 PM, Jacek Anaszewski wrote:
>>> Dan,
>>>
>>> On 9/25/19 7:46 PM, Dan Murphy wrote:
>>>> Update the lp5523 to allow the use of the multi color framework.
>>>>
>>>> Signed-off-by: Dan Murphy <dmurphy@ti.com>
>>>> ---
>>>>    drivers/leds/Kconfig                      |   1 +
>>>>    drivers/leds/leds-lp5523.c                |  13 ++
>>>>    drivers/leds/leds-lp55xx-common.c         | 150 ++++++++++++++++++----
>>>>    drivers/leds/leds-lp55xx-common.h         |  11 ++
>>>>    include/linux/platform_data/leds-lp55xx.h |   6 +
>>>>    5 files changed, 157 insertions(+), 24 deletions(-)
>>>>
>>>> diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
>>>> index 84f60e35c5ee..dc3d9f2194cd 100644
>>>> --- a/drivers/leds/Kconfig
>>>> +++ b/drivers/leds/Kconfig
>>>> @@ -377,6 +377,7 @@ config LEDS_LP50XX
>>>>    config LEDS_LP55XX_COMMON
>>>>        tristate "Common Driver for TI/National
>>>> LP5521/5523/55231/5562/8501"
>>>>        depends on LEDS_LP5521 || LEDS_LP5523 || LEDS_LP5562 ||
>>>> LEDS_LP8501
>>>> +    depends on LEDS_CLASS_MULTI_COLOR && OF
>>>>        select FW_LOADER
>>>>        select FW_LOADER_USER_HELPER
>>>>        help
>>>> diff --git a/drivers/leds/leds-lp5523.c b/drivers/leds/leds-lp5523.c
>>>> index d0b931a136b9..8b2cdb98fed6 100644
>>>> --- a/drivers/leds/leds-lp5523.c
>>>> +++ b/drivers/leds/leds-lp5523.c
>>>> @@ -791,6 +791,18 @@ static ssize_t store_master_fader_leds(struct
>>>> device *dev,
>>>>        return ret;
>>>>    }
>>>>    +static int lp5523_led_intensity(struct lp55xx_led *led, int chan_num)
>>> Why do we need this function? brightness op will not suffice?
>> I looked at this before sending it in.  This API adds the chan_num to
>> write to.
>>
>> The brightness_fn does not it takes it from the led structure.
>>
>>>> +{
>>>> +    struct lp55xx_chip *chip = led->chip;
>>>> +    int ret;
>>>> +
>>>> +    mutex_lock(&chip->lock);
>>>> +    ret = lp55xx_write(chip, LP5523_REG_LED_PWM_BASE + chan_num,
>>>> +             led->brightness);
>>>> +    mutex_unlock(&chip->lock);
>>>> +    return ret;
>>>> +}
>>>> +
>>>>    static int lp5523_led_brightness(struct lp55xx_led *led)
>>>>    {
>>>>        struct lp55xx_chip *chip = led->chip;
>>>> @@ -857,6 +869,7 @@ static struct lp55xx_device_config lp5523_cfg = {
>>>>        .max_channel  = LP5523_MAX_LEDS,
>>>>        .post_init_device   = lp5523_post_init_device,
>>>>        .brightness_fn      = lp5523_led_brightness,
>>>> +    .color_intensity_fn = lp5523_led_intensity,
>>>>        .set_led_current    = lp5523_set_led_current,
>>>>        .firmware_cb        = lp5523_firmware_loaded,
>>>>        .run_engine         = lp5523_run_engine,
>>>> diff --git a/drivers/leds/leds-lp55xx-common.c
>>>> b/drivers/leds/leds-lp55xx-common.c
>>>> index 44ced02b49f9..0e4b3a9d3047 100644
>>>> --- a/drivers/leds/leds-lp55xx-common.c
>>>> +++ b/drivers/leds/leds-lp55xx-common.c
>>>> @@ -136,9 +136,26 @@ static int lp55xx_set_brightness(struct
>>>> led_classdev *cdev,
>>>>    {
>>>>        struct lp55xx_led *led = cdev_to_lp55xx_led(cdev);
>>>>        struct lp55xx_device_config *cfg = led->chip->cfg;
>>>> +    int brightness_val[LP55XX_MAX_GROUPED_CHAN];
>>>> +    int ret;
>>>> +    int i;
>>>> +
>>>> +    if (led->mc_cdev.num_leds > 1) {
>>>> +        led_mc_calc_brightness(&led->mc_cdev,
>>>> +                       brightness, brightness_val);
>>>> +        for (i = 0; i < led->mc_cdev.num_leds; i++) {
>>>> +            led->brightness = brightness_val[i];
>>>> +            ret = cfg->color_intensity_fn(led,
>>>> +                              led->grouped_channels[i]);
>>> Now we will have three separate calls for each color component
>>> (and possibly sleeping on mutex on contention).
>>>
>>> Probably LED mc class use case will need a bit different design.
>>>
>>> Also, instead of grouped_channels we could possibly have
>>>
>>> led_mc_get_color_id(&led->mc_dev, i)
>> color_id and grouped_channels are not a 1:1 mapping
> OK, they're channel numbers.
>
>>> which would map entry position index to color_id.
>>>
>>> I will stop reviewing here and will continue after taking
>>> deeper look at this lp55xx design.
> I've analyzed that design in greater detail and have started
> to wonder why you can't pass two arrays to the new op:
> channel numbers and corresponding calculated channel intensities?


OK so I coded this up.  And there is not a clean way to do this since 
the channels and colors are not correlated between two structures.  In 
order to do this we would have to expand the grouped_channel and 
channel_color arrays in the lp55xx_led to LED_COLOR_ID_MAX and put the 
channel and color_component value in the position in the array that is 
associated with the color ID. Then the driver can loop through the 
available colors from the MC class and get the channel and 
color_component information.

Beyond that in coding this and thinking about the design it is better to 
have the lp55xx_common code to do all the heavy lifting and the children 
to just perform the action on the device itself. So doing the loop in 
the common code like we have now and calling the intensity_fn based on x 
number of LEDs.  The child subscriber to the common code should have to 
worry about the color it should only care about the channel and the value.

Dan



^ permalink raw reply	[flat|nested] 38+ messages in thread

* Re: [PATCH v9 13/15] leds: lp55xx: Update the lp55xx to use the multi color framework
  2019-09-30 16:31         ` Dan Murphy
@ 2019-09-30 20:34           ` Dan Murphy
  0 siblings, 0 replies; 38+ messages in thread
From: Dan Murphy @ 2019-09-30 20:34 UTC (permalink / raw)
  To: Jacek Anaszewski, pavel; +Cc: linux-leds, linux-kernel

Jacek

On 9/30/19 11:31 AM, Dan Murphy wrote:
> Jacek
>
> On 9/29/19 8:01 AM, Jacek Anaszewski wrote:
>> Dan,
>>
>> On 9/26/19 2:02 PM, Dan Murphy wrote:
>>> Jacek
>>>
>>> On 9/25/19 5:00 PM, Jacek Anaszewski wrote:
>>>> Dan,
>>>>
>>>> On 9/25/19 7:46 PM, Dan Murphy wrote:
>>>>> Update the lp5523 to allow the use of the multi color framework.
>>>>>
>>>>> Signed-off-by: Dan Murphy <dmurphy@ti.com>
>>>>> ---
>>>>>    drivers/leds/Kconfig                      |   1 +
>>>>>    drivers/leds/leds-lp5523.c                |  13 ++
>>>>>    drivers/leds/leds-lp55xx-common.c         | 150 
>>>>> ++++++++++++++++++----
>>>>>    drivers/leds/leds-lp55xx-common.h         |  11 ++
>>>>>    include/linux/platform_data/leds-lp55xx.h |   6 +
>>>>>    5 files changed, 157 insertions(+), 24 deletions(-)
>>>>>
>>>>> diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
>>>>> index 84f60e35c5ee..dc3d9f2194cd 100644
>>>>> --- a/drivers/leds/Kconfig
>>>>> +++ b/drivers/leds/Kconfig
>>>>> @@ -377,6 +377,7 @@ config LEDS_LP50XX
>>>>>    config LEDS_LP55XX_COMMON
>>>>>        tristate "Common Driver for TI/National
>>>>> LP5521/5523/55231/5562/8501"
>>>>>        depends on LEDS_LP5521 || LEDS_LP5523 || LEDS_LP5562 ||
>>>>> LEDS_LP8501
>>>>> +    depends on LEDS_CLASS_MULTI_COLOR && OF
>>>>>        select FW_LOADER
>>>>>        select FW_LOADER_USER_HELPER
>>>>>        help
>>>>> diff --git a/drivers/leds/leds-lp5523.c b/drivers/leds/leds-lp5523.c
>>>>> index d0b931a136b9..8b2cdb98fed6 100644
>>>>> --- a/drivers/leds/leds-lp5523.c
>>>>> +++ b/drivers/leds/leds-lp5523.c
>>>>> @@ -791,6 +791,18 @@ static ssize_t store_master_fader_leds(struct
>>>>> device *dev,
>>>>>        return ret;
>>>>>    }
>>>>>    +static int lp5523_led_intensity(struct lp55xx_led *led, int 
>>>>> chan_num)
>>>> Why do we need this function? brightness op will not suffice?
>>> I looked at this before sending it in.  This API adds the chan_num to
>>> write to.
>>>
>>> The brightness_fn does not it takes it from the led structure.
>>>
>>>>> +{
>>>>> +    struct lp55xx_chip *chip = led->chip;
>>>>> +    int ret;
>>>>> +
>>>>> +    mutex_lock(&chip->lock);
>>>>> +    ret = lp55xx_write(chip, LP5523_REG_LED_PWM_BASE + chan_num,
>>>>> +             led->brightness);
>>>>> +    mutex_unlock(&chip->lock);
>>>>> +    return ret;
>>>>> +}
>>>>> +
>>>>>    static int lp5523_led_brightness(struct lp55xx_led *led)
>>>>>    {
>>>>>        struct lp55xx_chip *chip = led->chip;
>>>>> @@ -857,6 +869,7 @@ static struct lp55xx_device_config lp5523_cfg = {
>>>>>        .max_channel  = LP5523_MAX_LEDS,
>>>>>        .post_init_device   = lp5523_post_init_device,
>>>>>        .brightness_fn      = lp5523_led_brightness,
>>>>> +    .color_intensity_fn = lp5523_led_intensity,
>>>>>        .set_led_current    = lp5523_set_led_current,
>>>>>        .firmware_cb        = lp5523_firmware_loaded,
>>>>>        .run_engine         = lp5523_run_engine,
>>>>> diff --git a/drivers/leds/leds-lp55xx-common.c
>>>>> b/drivers/leds/leds-lp55xx-common.c
>>>>> index 44ced02b49f9..0e4b3a9d3047 100644
>>>>> --- a/drivers/leds/leds-lp55xx-common.c
>>>>> +++ b/drivers/leds/leds-lp55xx-common.c
>>>>> @@ -136,9 +136,26 @@ static int lp55xx_set_brightness(struct
>>>>> led_classdev *cdev,
>>>>>    {
>>>>>        struct lp55xx_led *led = cdev_to_lp55xx_led(cdev);
>>>>>        struct lp55xx_device_config *cfg = led->chip->cfg;
>>>>> +    int brightness_val[LP55XX_MAX_GROUPED_CHAN];
>>>>> +    int ret;
>>>>> +    int i;
>>>>> +
>>>>> +    if (led->mc_cdev.num_leds > 1) {
>>>>> +        led_mc_calc_brightness(&led->mc_cdev,
>>>>> +                       brightness, brightness_val);
>>>>> +        for (i = 0; i < led->mc_cdev.num_leds; i++) {
>>>>> +            led->brightness = brightness_val[i];
>>>>> +            ret = cfg->color_intensity_fn(led,
>>>>> + led->grouped_channels[i]);
>>>> Now we will have three separate calls for each color component
>>>> (and possibly sleeping on mutex on contention).
>>>>
>>>> Probably LED mc class use case will need a bit different design.
>>>>
>>>> Also, instead of grouped_channels we could possibly have
>>>>
>>>> led_mc_get_color_id(&led->mc_dev, i)
>>> color_id and grouped_channels are not a 1:1 mapping
>> OK, they're channel numbers.
>>
>>>> which would map entry position index to color_id.
>>>>
>>>> I will stop reviewing here and will continue after taking
>>>> deeper look at this lp55xx design.
>> I've analyzed that design in greater detail and have started
>> to wonder why you can't pass two arrays to the new op:
>> channel numbers and corresponding calculated channel intensities?
>
>
> OK so I coded this up.  And there is not a clean way to do this since 
> the channels and colors are not correlated between two structures.  In 
> order to do this we would have to expand the grouped_channel and 
> channel_color arrays in the lp55xx_led to LED_COLOR_ID_MAX and put the 
> channel and color_component value in the position in the array that is 
> associated with the color ID. Then the driver can loop through the 
> available colors from the MC class and get the channel and 
> color_component information.
>
I spent the day trying to figure out the cleanest way to do this.  What 
I did was I added a struct to the MC framework (struct name will 
probably need to be changed)

This also solves the problem that you brought up on the caller knowing 
what ID and brightness goes to what.

struct led_mc_color_conversion {
     int color_id;
     int brightness;
};

For devices that need the color conversion to take place the driver will 
pass in an array of structs to be filled out by the MC framework.  Once 
the MCFW populates the array the device driver can map the color IDs to 
the the associated output.  So for the LP55xx I was able to map the 
color ID to the channel number.

I added a brightness value to the intensity function so now the caller 
passes in the channel number and the brightness.  This should be all the 
child cares about.

I think it is ok that the common code calls the intensity function x 
number of times.  Otherwise each child will need to have the same code 
to de-reference the struct seems a bit error wrought IMO.

Dan


> Beyond that in coding this and thinking about the design it is better 
> to have the lp55xx_common code to do all the heavy lifting and the 
> children to just perform the action on the device itself. So doing the 
> loop in the common code like we have now and calling the intensity_fn 
> based on x number of LEDs.  The child subscriber to the common code 
> should have to worry about the color it should only care about the 
> channel and the value.
>
> Dan
>
>

^ permalink raw reply	[flat|nested] 38+ messages in thread

* Re: [PATCH v9 12/15] ARM: dts: ste-href: Add reg property to the LP5521 channel nodes
  2019-09-25 17:46 ` [PATCH v9 12/15] ARM: dts: ste-href: Add reg property to the LP5521 channel nodes Dan Murphy
@ 2019-10-04 21:30   ` Linus Walleij
  0 siblings, 0 replies; 38+ messages in thread
From: Linus Walleij @ 2019-10-04 21:30 UTC (permalink / raw)
  To: Dan Murphy
  Cc: Jacek Anaszewski, Pavel Machek, Linux LED Subsystem, linux-kernel

On Wed, Sep 25, 2019 at 7:41 PM Dan Murphy <dmurphy@ti.com> wrote:

> Add the reg property to each channel node.  This update is
> to accomodate the multicolor framework.  In addition to the
> accomodation this allows the LEDs to be placed on any channel
> and allow designs to skip channels as opposed to requiring
> sequential order.
>
> Signed-off-by: Dan Murphy <dmurphy@ti.com>
> CC: Linus Walleij <linus.walleij@linaro.org>

Patch applied.

Yours,
Linus Walleij

^ permalink raw reply	[flat|nested] 38+ messages in thread

end of thread, back to index

Thread overview: 38+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-09-25 17:46 [PATCH v9 00/15] Multicolor Framework Dan Murphy
2019-09-25 17:46 ` [PATCH v9 01/15] leds: multicolor: Add sysfs interface definition Dan Murphy
2019-09-25 20:58   ` Jacek Anaszewski
2019-09-26 11:10   ` Pavel Machek
2019-09-26 12:08     ` Dan Murphy
2019-09-25 17:46 ` [PATCH v9 02/15] dt: bindings: Add multicolor class dt bindings documention Dan Murphy
2019-09-25 17:46 ` [PATCH v9 03/15] dt-bindings: leds: Add multicolor ID to the color ID list Dan Murphy
2019-09-25 17:46 ` [PATCH v9 04/15] " Dan Murphy
2019-09-25 17:46 ` [PATCH v9 05/15] leds: multicolor: Introduce a multicolor class definition Dan Murphy
2019-09-25 21:12   ` Jacek Anaszewski
2019-09-26 11:52     ` Dan Murphy
2019-09-28 10:09       ` Jacek Anaszewski
2019-09-28 18:31         ` Jacek Anaszewski
2019-09-25 17:46 ` [PATCH v9 06/15] dt: bindings: lp50xx: Introduce the lp50xx family of RGB drivers Dan Murphy
2019-09-25 17:46 ` [PATCH v9 07/15] leds: lp50xx: Add the LP50XX family of the RGB LED driver Dan Murphy
2019-09-25 21:27   ` Jacek Anaszewski
2019-09-26 11:59     ` Dan Murphy
2019-09-28 10:29       ` Jacek Anaszewski
2019-09-25 17:46 ` [PATCH v9 08/15] dt: bindings: lp55xx: Be consistent in the document with LED Dan Murphy
2019-09-25 21:31   ` Jacek Anaszewski
2019-09-26 12:00     ` Dan Murphy
2019-09-25 17:46 ` [PATCH v9 09/15] dt: bindings: lp55xx: Update binding for Multicolor Framework Dan Murphy
2019-09-25 21:34   ` Jacek Anaszewski
2019-09-26 12:00     ` Dan Murphy
2019-09-25 17:46 ` [PATCH v9 10/15] ARM: dts: n900: Add reg property to the LP5523 channel node Dan Murphy
2019-09-25 17:46 ` [PATCH v9 11/15] ARM: dts: imx6dl-yapp4: Add reg property to the lp5562 " Dan Murphy
2019-09-25 18:00   ` Fabio Estevam
2019-09-25 18:16     ` Dan Murphy
2019-09-25 17:46 ` [PATCH v9 12/15] ARM: dts: ste-href: Add reg property to the LP5521 channel nodes Dan Murphy
2019-10-04 21:30   ` Linus Walleij
2019-09-25 17:46 ` [PATCH v9 13/15] leds: lp55xx: Update the lp55xx to use the multi color framework Dan Murphy
2019-09-25 22:00   ` Jacek Anaszewski
2019-09-26 12:02     ` Dan Murphy
2019-09-29 13:01       ` Jacek Anaszewski
2019-09-30 16:31         ` Dan Murphy
2019-09-30 20:34           ` Dan Murphy
2019-09-25 17:46 ` [PATCH v9 14/15] leds: lp55xx: Fix checkpatch file permissions issues Dan Murphy
2019-09-25 17:46 ` [PATCH v9 15/15] leds: lp5523: Fix checkpatch issues in the code Dan Murphy

Linux-LEDs Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-leds/0 linux-leds/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-leds linux-leds/ https://lore.kernel.org/linux-leds \
		linux-leds@vger.kernel.org linux-leds@archiver.kernel.org
	public-inbox-index linux-leds

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-leds


AGPL code for this site: git clone https://public-inbox.org/ public-inbox