* [PATCH 1/6] dt-bindings: mfd: max77650: convert the binding document to yaml
2019-09-30 13:02 [PATCH 0/6] dt-bindings: max77650: convert the device-tree bindings to yaml Bartosz Golaszewski
@ 2019-09-30 13:02 ` Bartosz Golaszewski
2019-10-04 13:52 ` Lee Jones
2019-09-30 13:02 ` [PATCH 2/6] dt-bindings: input: " Bartosz Golaszewski
` (4 subsequent siblings)
5 siblings, 1 reply; 11+ messages in thread
From: Bartosz Golaszewski @ 2019-09-30 13:02 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Dmitry Torokhov, Jacek Anaszewski,
Pavel Machek, Dan Murphy, Lee Jones, Sebastian Reichel,
Liam Girdwood, Mark Brown
Cc: linux-input, devicetree, linux-kernel, linux-leds, linux-pm,
Bartosz Golaszewski
From: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Convert the binding document for max77650 core mfd module to yaml.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
.../devicetree/bindings/mfd/max77650.txt | 47 +----------
.../devicetree/bindings/mfd/max77650.yaml | 83 +++++++++++++++++++
2 files changed, 84 insertions(+), 46 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mfd/max77650.yaml
diff --git a/Documentation/devicetree/bindings/mfd/max77650.txt b/Documentation/devicetree/bindings/mfd/max77650.txt
index b529d8d19335..080871686b3b 100644
--- a/Documentation/devicetree/bindings/mfd/max77650.txt
+++ b/Documentation/devicetree/bindings/mfd/max77650.txt
@@ -1,46 +1 @@
-MAX77650 ultra low-power PMIC from Maxim Integrated.
-
-Required properties:
--------------------
-- compatible: Must be "maxim,max77650"
-- reg: I2C device address.
-- interrupts: The interrupt on the parent the controller is
- connected to.
-- interrupt-controller: Marks the device node as an interrupt controller.
-- #interrupt-cells: Must be <2>.
-
-- gpio-controller: Marks the device node as a gpio controller.
-- #gpio-cells: Must be <2>. The first cell is the pin number and
- the second cell is used to specify the gpio active
- state.
-
-Optional properties:
---------------------
-gpio-line-names: Single string containing the name of the GPIO line.
-
-The GPIO-controller module is represented as part of the top-level PMIC
-node. The device exposes a single GPIO line.
-
-For device-tree bindings of other sub-modules (regulator, power supply,
-LEDs and onkey) refer to the binding documents under the respective
-sub-system directories.
-
-For more details on GPIO bindings, please refer to the generic GPIO DT
-binding document <devicetree/bindings/gpio/gpio.txt>.
-
-Example:
---------
-
- pmic@48 {
- compatible = "maxim,max77650";
- reg = <0x48>;
-
- interrupt-controller;
- interrupt-parent = <&gpio2>;
- #interrupt-cells = <2>;
- interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
-
- gpio-controller;
- #gpio-cells = <2>;
- gpio-line-names = "max77650-charger";
- };
+This file has been moved to max77650.yaml.
diff --git a/Documentation/devicetree/bindings/mfd/max77650.yaml b/Documentation/devicetree/bindings/mfd/max77650.yaml
new file mode 100644
index 000000000000..5186ad287ec7
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/max77650.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/max77650.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MAX77650 ultra low-power PMIC from Maxim Integrated.
+
+maintainers:
+ - Bartosz Golaszewski <bgolaszewski@baylibre.com>
+
+description: |
+ This document describes the DT properties of the core MFD controller.
+
+ The GPIO-controller module is represented as part of the top-level PMIC
+ node. The device exposes a single GPIO line.
+
+ For device-tree bindings of other sub-modules (regulator, power supply,
+ LEDs and onkey) refer to the binding documents under the respective
+ sub-system directories.
+
+ For more details on GPIO bindings, please refer to the generic GPIO DT
+ binding document <devicetree/bindings/gpio/gpio.txt>.
+
+properties:
+ compatible:
+ const: maxim,max77650
+
+ reg:
+ description:
+ I2C device address.
+ maxItems: 1
+
+ interrupts:
+ description:
+ The interrupt on the parent the controller is connected to.
+ maxItems: 1
+
+ interrupt-controller: true
+
+ "#interrupt-cells":
+ const: 2
+ description:
+ The first cell is the IRQ number, the second cell is the trigger type.
+
+ gpio-controller: true
+
+ "#gpio-cells":
+ const: 2
+ description:
+ The first cell is the pin number and the second cell is used to specify
+ the gpio active state.
+
+ gpio-line-names:
+ $ref: '/schemas/types.yaml#/definitions/string-array'
+ maxItems: 1
+ description:
+ Single string containing the name of the GPIO line.
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-controller
+ - "#interrupt-cells"
+ - gpio-controller
+ - "#gpio-cells"
+
+examples:
+ - |
+ pmic@48 {
+ compatible = "maxim,max77650";
+ reg = <0x48>;
+
+ interrupt-controller;
+ interrupt-parent = <&gpio2>;
+ #interrupt-cells = <2>;
+ interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-line-names = "max77650-charger";
+ };
--
2.23.0
^ permalink raw reply related [flat|nested] 11+ messages in thread* Re: [PATCH 1/6] dt-bindings: mfd: max77650: convert the binding document to yaml
2019-09-30 13:02 ` [PATCH 1/6] dt-bindings: mfd: max77650: convert the binding document " Bartosz Golaszewski
@ 2019-10-04 13:52 ` Lee Jones
0 siblings, 0 replies; 11+ messages in thread
From: Lee Jones @ 2019-10-04 13:52 UTC (permalink / raw)
To: Bartosz Golaszewski
Cc: Rob Herring, Mark Rutland, Dmitry Torokhov, Jacek Anaszewski,
Pavel Machek, Dan Murphy, Sebastian Reichel, Liam Girdwood,
Mark Brown, linux-input, devicetree, linux-kernel, linux-leds,
linux-pm, Bartosz Golaszewski
On Mon, 30 Sep 2019, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bgolaszewski@baylibre.com>
>
> Convert the binding document for max77650 core mfd module to yaml.
MAX77650, MFD, YAML.
> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> ---
> .../devicetree/bindings/mfd/max77650.txt | 47 +----------
> .../devicetree/bindings/mfd/max77650.yaml | 83 +++++++++++++++++++
> 2 files changed, 84 insertions(+), 46 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/mfd/max77650.yaml
Looks okay in principle, but needs a DT Ack. Preferably from someone
who speaks YAML.
--
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH 2/6] dt-bindings: input: max77650: convert the binding document to yaml
2019-09-30 13:02 [PATCH 0/6] dt-bindings: max77650: convert the device-tree bindings to yaml Bartosz Golaszewski
2019-09-30 13:02 ` [PATCH 1/6] dt-bindings: mfd: max77650: convert the binding document " Bartosz Golaszewski
@ 2019-09-30 13:02 ` Bartosz Golaszewski
2019-09-30 13:02 ` [PATCH 3/6] dt-bindings: regulator: " Bartosz Golaszewski
` (3 subsequent siblings)
5 siblings, 0 replies; 11+ messages in thread
From: Bartosz Golaszewski @ 2019-09-30 13:02 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Dmitry Torokhov, Jacek Anaszewski,
Pavel Machek, Dan Murphy, Lee Jones, Sebastian Reichel,
Liam Girdwood, Mark Brown
Cc: linux-input, devicetree, linux-kernel, linux-leds, linux-pm,
Bartosz Golaszewski
From: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Convert the binding document for max77650 onkey module to yaml.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
.../bindings/input/max77650-onkey.txt | 27 +-----------
.../bindings/input/max77650-onkey.yaml | 43 +++++++++++++++++++
2 files changed, 44 insertions(+), 26 deletions(-)
create mode 100644 Documentation/devicetree/bindings/input/max77650-onkey.yaml
diff --git a/Documentation/devicetree/bindings/input/max77650-onkey.txt b/Documentation/devicetree/bindings/input/max77650-onkey.txt
index 477dc74f452a..a691fc49f1ea 100644
--- a/Documentation/devicetree/bindings/input/max77650-onkey.txt
+++ b/Documentation/devicetree/bindings/input/max77650-onkey.txt
@@ -1,26 +1 @@
-Onkey driver for MAX77650 PMIC from Maxim Integrated.
-
-This module is part of the MAX77650 MFD device. For more details
-see Documentation/devicetree/bindings/mfd/max77650.txt.
-
-The onkey controller is represented as a sub-node of the PMIC node on
-the device tree.
-
-Required properties:
---------------------
-- compatible: Must be "maxim,max77650-onkey".
-
-Optional properties:
-- linux,code: The key-code to be reported when the key is pressed.
- Defaults to KEY_POWER.
-- maxim,onkey-slide: The system's button is a slide switch, not the default
- push button.
-
-Example:
---------
-
- onkey {
- compatible = "maxim,max77650-onkey";
- linux,code = <KEY_END>;
- maxim,onkey-slide;
- };
+This file has been moved to max77650-onkey.yaml.
diff --git a/Documentation/devicetree/bindings/input/max77650-onkey.yaml b/Documentation/devicetree/bindings/input/max77650-onkey.yaml
new file mode 100644
index 000000000000..eb2f8609bae2
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/max77650-onkey.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/max77650-onkey.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Onkey driver for MAX77650 PMIC from Maxim Integrated.
+
+maintainers:
+ - Bartosz Golaszewski <bgolaszewski@baylibre.com>
+
+description: |
+ This module is part of the MAX77650 MFD device. For more details
+ see Documentation/devicetree/bindings/mfd/max77650.yaml.
+
+ The onkey controller is represented as a sub-node of the PMIC node on
+ the device tree.
+
+properties:
+ compatible:
+ const: maxim,max77650-onkey
+
+ linux,code:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ The key-code to be reported when the key is pressed. Defaults
+ to KEY_POWER.
+
+ maxim,onkey-slide:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ The system's button is a slide switch, not the default push button.
+
+required:
+ - compatible
+
+examples:
+ - |
+ onkey {
+ compatible = "maxim,max77650-onkey";
+ linux,code = <KEY_END>;
+ maxim,onkey-slide;
+ };
--
2.23.0
^ permalink raw reply related [flat|nested] 11+ messages in thread* [PATCH 3/6] dt-bindings: regulator: max77650: convert the binding document to yaml
2019-09-30 13:02 [PATCH 0/6] dt-bindings: max77650: convert the device-tree bindings to yaml Bartosz Golaszewski
2019-09-30 13:02 ` [PATCH 1/6] dt-bindings: mfd: max77650: convert the binding document " Bartosz Golaszewski
2019-09-30 13:02 ` [PATCH 2/6] dt-bindings: input: " Bartosz Golaszewski
@ 2019-09-30 13:02 ` Bartosz Golaszewski
2019-09-30 13:02 ` [PATCH 4/6] dt-bindings: power: " Bartosz Golaszewski
` (2 subsequent siblings)
5 siblings, 0 replies; 11+ messages in thread
From: Bartosz Golaszewski @ 2019-09-30 13:02 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Dmitry Torokhov, Jacek Anaszewski,
Pavel Machek, Dan Murphy, Lee Jones, Sebastian Reichel,
Liam Girdwood, Mark Brown
Cc: linux-input, devicetree, linux-kernel, linux-leds, linux-pm,
Bartosz Golaszewski
From: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Convert the binding document for max77650 regulator module to yaml.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
.../bindings/regulator/max77650-regulator.txt | 42 +--------------
.../regulator/max77650-regulator.yaml | 51 +++++++++++++++++++
2 files changed, 52 insertions(+), 41 deletions(-)
create mode 100644 Documentation/devicetree/bindings/regulator/max77650-regulator.yaml
diff --git a/Documentation/devicetree/bindings/regulator/max77650-regulator.txt b/Documentation/devicetree/bindings/regulator/max77650-regulator.txt
index f1cbe813c30f..39686610589c 100644
--- a/Documentation/devicetree/bindings/regulator/max77650-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/max77650-regulator.txt
@@ -1,41 +1 @@
-Regulator driver for MAX77650 PMIC from Maxim Integrated.
-
-This module is part of the MAX77650 MFD device. For more details
-see Documentation/devicetree/bindings/mfd/max77650.txt.
-
-The regulator controller is represented as a sub-node of the PMIC node
-on the device tree.
-
-The device has a single LDO regulator and a SIMO buck-boost regulator with
-three independent power rails.
-
-Required properties:
---------------------
-- compatible: Must be "maxim,max77650-regulator"
-
-Each rail must be instantiated under the regulators subnode of the top PMIC
-node. Up to four regulators can be defined. For standard regulator properties
-refer to Documentation/devicetree/bindings/regulator/regulator.txt.
-
-Available regulator compatible strings are: "ldo", "sbb0", "sbb1", "sbb2".
-
-Example:
---------
-
- regulators {
- compatible = "maxim,max77650-regulator";
-
- max77650_ldo: regulator@0 {
- regulator-compatible = "ldo";
- regulator-name = "max77650-ldo";
- regulator-min-microvolt = <1350000>;
- regulator-max-microvolt = <2937500>;
- };
-
- max77650_sbb0: regulator@1 {
- regulator-compatible = "sbb0";
- regulator-name = "max77650-sbb0";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1587500>;
- };
- };
+This file has been moved to max77650-regulator.yaml.
diff --git a/Documentation/devicetree/bindings/regulator/max77650-regulator.yaml b/Documentation/devicetree/bindings/regulator/max77650-regulator.yaml
new file mode 100644
index 000000000000..c0d986948ac8
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/max77650-regulator.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/max77650-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Regulator driver for MAX77650 PMIC from Maxim Integrated.
+
+maintainers:
+ - Bartosz Golaszewski <bgolaszewski@baylibre.com>
+
+description: |
+ This module is part of the MAX77650 MFD device. For more details
+ see Documentation/devicetree/bindings/mfd/max77650.txt.
+
+ The regulator controller is represented as a sub-node of the PMIC node
+ on the device tree.
+
+ The device has a single LDO regulator and a SIMO buck-boost regulator with
+ three independent power rails.
+
+properties:
+ compatible:
+ const: maxim,max77650-regulator
+
+patternProperties:
+ "^regulator@[0-3]$":
+ $ref: "regulator.yaml#"
+
+required:
+ - compatible
+
+examples:
+ - |
+ regulators {
+ compatible = "maxim,max77650-regulator";
+
+ max77650_ldo: regulator@0 {
+ regulator-compatible = "ldo";
+ regulator-name = "max77650-ldo";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <2937500>;
+ };
+
+ max77650_sbb0: regulator@1 {
+ regulator-compatible = "sbb0";
+ regulator-name = "max77650-sbb0";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1587500>;
+ };
+ };
--
2.23.0
^ permalink raw reply related [flat|nested] 11+ messages in thread* [PATCH 4/6] dt-bindings: power: max77650: convert the binding document to yaml
2019-09-30 13:02 [PATCH 0/6] dt-bindings: max77650: convert the device-tree bindings to yaml Bartosz Golaszewski
` (2 preceding siblings ...)
2019-09-30 13:02 ` [PATCH 3/6] dt-bindings: regulator: " Bartosz Golaszewski
@ 2019-09-30 13:02 ` Bartosz Golaszewski
2019-10-14 4:32 ` Sebastian Reichel
2019-09-30 13:02 ` [PATCH 5/6] dt-bindings: leds: " Bartosz Golaszewski
2019-09-30 13:02 ` [PATCH 6/6] MAINTAINERS: update the list of maintained files for max77650 Bartosz Golaszewski
5 siblings, 1 reply; 11+ messages in thread
From: Bartosz Golaszewski @ 2019-09-30 13:02 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Dmitry Torokhov, Jacek Anaszewski,
Pavel Machek, Dan Murphy, Lee Jones, Sebastian Reichel,
Liam Girdwood, Mark Brown
Cc: linux-input, devicetree, linux-kernel, linux-leds, linux-pm,
Bartosz Golaszewski
From: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Convert the binding document for max77650 charger module to yaml.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
.../power/supply/max77650-charger.txt | 29 +------------
.../power/supply/max77650-charger.yaml | 42 +++++++++++++++++++
2 files changed, 43 insertions(+), 28 deletions(-)
create mode 100644 Documentation/devicetree/bindings/power/supply/max77650-charger.yaml
diff --git a/Documentation/devicetree/bindings/power/supply/max77650-charger.txt b/Documentation/devicetree/bindings/power/supply/max77650-charger.txt
index e6d0fb6ff94e..fbab7d3ac8e3 100644
--- a/Documentation/devicetree/bindings/power/supply/max77650-charger.txt
+++ b/Documentation/devicetree/bindings/power/supply/max77650-charger.txt
@@ -1,28 +1 @@
-Battery charger driver for MAX77650 PMIC from Maxim Integrated.
-
-This module is part of the MAX77650 MFD device. For more details
-see Documentation/devicetree/bindings/mfd/max77650.txt.
-
-The charger is represented as a sub-node of the PMIC node on the device tree.
-
-Required properties:
---------------------
-- compatible: Must be "maxim,max77650-charger"
-
-Optional properties:
---------------------
-- input-voltage-min-microvolt: Minimum CHGIN regulation voltage. Must be one
- of: 4000000, 4100000, 4200000, 4300000,
- 4400000, 4500000, 4600000, 4700000.
-- input-current-limit-microamp: CHGIN input current limit (in microamps). Must
- be one of: 95000, 190000, 285000, 380000,
- 475000.
-
-Example:
---------
-
- charger {
- compatible = "maxim,max77650-charger";
- input-voltage-min-microvolt = <4200000>;
- input-current-limit-microamp = <285000>;
- };
+This file was moved to max77650-charger.yaml.
diff --git a/Documentation/devicetree/bindings/power/supply/max77650-charger.yaml b/Documentation/devicetree/bindings/power/supply/max77650-charger.yaml
new file mode 100644
index 000000000000..9dd0dad0f948
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/max77650-charger.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/max77650-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Battery charger driver for MAX77650 PMIC from Maxim Integrated.
+
+maintainers:
+ - Bartosz Golaszewski <bgolaszewski@baylibre.com>
+
+description: |
+ This module is part of the MAX77650 MFD device. For more details
+ see Documentation/devicetree/bindings/mfd/max77650.txt.
+
+ The charger is represented as a sub-node of the PMIC node on the device tree.
+
+properties:
+ compatible:
+ const: maxim,max77650-charger
+
+ input-voltage-min-microvolt:
+ description:
+ Minimum CHGIN regulation voltage.
+ enum: [ 4000000, 4100000, 4200000, 4300000,
+ 4400000, 4500000, 4600000, 4700000 ]
+
+ input-current-limit-microamp:
+ description:
+ CHGIN input current limit (in microamps).
+ enum: [ 95000, 190000, 285000, 380000, 475000 ]
+
+required:
+ - compatible
+
+examples:
+ - |
+ charger {
+ compatible = "maxim,max77650-charger";
+ input-voltage-min-microvolt = <4200000>;
+ input-current-limit-microamp = <285000>;
+ };
--
2.23.0
^ permalink raw reply related [flat|nested] 11+ messages in thread* Re: [PATCH 4/6] dt-bindings: power: max77650: convert the binding document to yaml
2019-09-30 13:02 ` [PATCH 4/6] dt-bindings: power: " Bartosz Golaszewski
@ 2019-10-14 4:32 ` Sebastian Reichel
0 siblings, 0 replies; 11+ messages in thread
From: Sebastian Reichel @ 2019-10-14 4:32 UTC (permalink / raw)
To: Bartosz Golaszewski
Cc: Rob Herring, Mark Rutland, Dmitry Torokhov, Jacek Anaszewski,
Pavel Machek, Dan Murphy, Lee Jones, Liam Girdwood, Mark Brown,
linux-input, devicetree, linux-kernel, linux-leds, linux-pm,
Bartosz Golaszewski
[-- Attachment #1: Type: text/plain, Size: 3741 bytes --]
Hi,
On Mon, Sep 30, 2019 at 03:02:44PM +0200, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bgolaszewski@baylibre.com>
>
> Convert the binding document for max77650 charger module to yaml.
>
> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> ---
Assuming, that Rob will merge the series:
Acked-by: Sebastian Reichel <sre@kernel.org>
-- Sebastian
> .../power/supply/max77650-charger.txt | 29 +------------
> .../power/supply/max77650-charger.yaml | 42 +++++++++++++++++++
> 2 files changed, 43 insertions(+), 28 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/power/supply/max77650-charger.yaml
>
> diff --git a/Documentation/devicetree/bindings/power/supply/max77650-charger.txt b/Documentation/devicetree/bindings/power/supply/max77650-charger.txt
> index e6d0fb6ff94e..fbab7d3ac8e3 100644
> --- a/Documentation/devicetree/bindings/power/supply/max77650-charger.txt
> +++ b/Documentation/devicetree/bindings/power/supply/max77650-charger.txt
> @@ -1,28 +1 @@
> -Battery charger driver for MAX77650 PMIC from Maxim Integrated.
> -
> -This module is part of the MAX77650 MFD device. For more details
> -see Documentation/devicetree/bindings/mfd/max77650.txt.
> -
> -The charger is represented as a sub-node of the PMIC node on the device tree.
> -
> -Required properties:
> ---------------------
> -- compatible: Must be "maxim,max77650-charger"
> -
> -Optional properties:
> ---------------------
> -- input-voltage-min-microvolt: Minimum CHGIN regulation voltage. Must be one
> - of: 4000000, 4100000, 4200000, 4300000,
> - 4400000, 4500000, 4600000, 4700000.
> -- input-current-limit-microamp: CHGIN input current limit (in microamps). Must
> - be one of: 95000, 190000, 285000, 380000,
> - 475000.
> -
> -Example:
> ---------
> -
> - charger {
> - compatible = "maxim,max77650-charger";
> - input-voltage-min-microvolt = <4200000>;
> - input-current-limit-microamp = <285000>;
> - };
> +This file was moved to max77650-charger.yaml.
> diff --git a/Documentation/devicetree/bindings/power/supply/max77650-charger.yaml b/Documentation/devicetree/bindings/power/supply/max77650-charger.yaml
> new file mode 100644
> index 000000000000..9dd0dad0f948
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/power/supply/max77650-charger.yaml
> @@ -0,0 +1,42 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/power/supply/max77650-charger.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Battery charger driver for MAX77650 PMIC from Maxim Integrated.
> +
> +maintainers:
> + - Bartosz Golaszewski <bgolaszewski@baylibre.com>
> +
> +description: |
> + This module is part of the MAX77650 MFD device. For more details
> + see Documentation/devicetree/bindings/mfd/max77650.txt.
> +
> + The charger is represented as a sub-node of the PMIC node on the device tree.
> +
> +properties:
> + compatible:
> + const: maxim,max77650-charger
> +
> + input-voltage-min-microvolt:
> + description:
> + Minimum CHGIN regulation voltage.
> + enum: [ 4000000, 4100000, 4200000, 4300000,
> + 4400000, 4500000, 4600000, 4700000 ]
> +
> + input-current-limit-microamp:
> + description:
> + CHGIN input current limit (in microamps).
> + enum: [ 95000, 190000, 285000, 380000, 475000 ]
> +
> +required:
> + - compatible
> +
> +examples:
> + - |
> + charger {
> + compatible = "maxim,max77650-charger";
> + input-voltage-min-microvolt = <4200000>;
> + input-current-limit-microamp = <285000>;
> + };
> --
> 2.23.0
>
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH 5/6] dt-bindings: leds: max77650: convert the binding document to yaml
2019-09-30 13:02 [PATCH 0/6] dt-bindings: max77650: convert the device-tree bindings to yaml Bartosz Golaszewski
` (3 preceding siblings ...)
2019-09-30 13:02 ` [PATCH 4/6] dt-bindings: power: " Bartosz Golaszewski
@ 2019-09-30 13:02 ` Bartosz Golaszewski
2019-11-04 9:09 ` Pavel Machek
2019-09-30 13:02 ` [PATCH 6/6] MAINTAINERS: update the list of maintained files for max77650 Bartosz Golaszewski
5 siblings, 1 reply; 11+ messages in thread
From: Bartosz Golaszewski @ 2019-09-30 13:02 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Dmitry Torokhov, Jacek Anaszewski,
Pavel Machek, Dan Murphy, Lee Jones, Sebastian Reichel,
Liam Girdwood, Mark Brown
Cc: linux-input, devicetree, linux-kernel, linux-leds, linux-pm,
Bartosz Golaszewski
From: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Convert the binding document for max77650 LED module to yaml.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
.../bindings/leds/leds-max77650.txt | 58 +------------
.../bindings/leds/leds-max77650.yaml | 82 +++++++++++++++++++
2 files changed, 83 insertions(+), 57 deletions(-)
create mode 100644 Documentation/devicetree/bindings/leds/leds-max77650.yaml
diff --git a/Documentation/devicetree/bindings/leds/leds-max77650.txt b/Documentation/devicetree/bindings/leds/leds-max77650.txt
index 3a67115cc1da..33d6ff23f0ef 100644
--- a/Documentation/devicetree/bindings/leds/leds-max77650.txt
+++ b/Documentation/devicetree/bindings/leds/leds-max77650.txt
@@ -1,57 +1 @@
-LED driver for MAX77650 PMIC from Maxim Integrated.
-
-This module is part of the MAX77650 MFD device. For more details
-see Documentation/devicetree/bindings/mfd/max77650.txt.
-
-The LED controller is represented as a sub-node of the PMIC node on
-the device tree.
-
-This device has three current sinks.
-
-Required properties:
---------------------
-- compatible: Must be "maxim,max77650-led"
-- #address-cells: Must be <1>.
-- #size-cells: Must be <0>.
-
-Each LED is represented as a sub-node of the LED-controller node. Up to
-three sub-nodes can be defined.
-
-Required properties of the sub-node:
-------------------------------------
-
-- reg: Must be <0>, <1> or <2>.
-
-Optional properties of the sub-node:
-------------------------------------
-
-- label: See Documentation/devicetree/bindings/leds/common.txt
-- linux,default-trigger: See Documentation/devicetree/bindings/leds/common.txt
-
-For more details, please refer to the generic GPIO DT binding document
-<devicetree/bindings/gpio/gpio.txt>.
-
-Example:
---------
-
- leds {
- compatible = "maxim,max77650-led";
- #address-cells = <1>;
- #size-cells = <0>;
-
- led@0 {
- reg = <0>;
- label = "blue:usr0";
- };
-
- led@1 {
- reg = <1>;
- label = "red:usr1";
- linux,default-trigger = "heartbeat";
- };
-
- led@2 {
- reg = <2>;
- label = "green:usr2";
- };
- };
+This file has been moved to leds-max77650.yaml.
diff --git a/Documentation/devicetree/bindings/leds/leds-max77650.yaml b/Documentation/devicetree/bindings/leds/leds-max77650.yaml
new file mode 100644
index 000000000000..bb541ff67f80
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-max77650.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/leds-max77650.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LED driver for MAX77650 PMIC from Maxim Integrated.
+
+maintainers:
+ - Bartosz Golaszewski <bgolaszewski@baylibre.com>
+
+description: |
+ This module is part of the MAX77650 MFD device. For more details
+ see Documentation/devicetree/bindings/mfd/max77650.txt.
+
+ The LED controller is represented as a sub-node of the PMIC node on
+ the device tree.
+
+ This device has three current sinks.
+
+properties:
+ compatible:
+ const: maxim,max77650-led
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+patternProperties:
+ "^led@[0-2]$":
+ type: object
+ description: |
+ Properties for a single LED.
+
+ properties:
+ reg:
+ description:
+ Index of the LED.
+ maxItems: 1
+ minimum: 0
+ maximum: 2
+
+ label:
+ $ref: "/schemas/types.yaml#/definitions/string"
+ description:
+ The label of this LED.
+
+ linux,default-trigger:
+ $ref: "/schemas/types.yaml#/definitions/string"
+ description:
+ String defining the default trigger assigned to this LED.
+
+required:
+ - compatible
+ - "#address-cells"
+ - "#size-cells"
+
+examples:
+ - |
+ leds {
+ compatible = "maxim,max77650-led";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ label = "blue:usr0";
+ };
+
+ led@1 {
+ reg = <1>;
+ label = "red:usr1";
+ linux,default-trigger = "heartbeat";
+ };
+
+ led@2 {
+ reg = <2>;
+ label = "green:usr2";
+ };
+ };
--
2.23.0
^ permalink raw reply related [flat|nested] 11+ messages in thread* Re: [PATCH 5/6] dt-bindings: leds: max77650: convert the binding document to yaml
2019-09-30 13:02 ` [PATCH 5/6] dt-bindings: leds: " Bartosz Golaszewski
@ 2019-11-04 9:09 ` Pavel Machek
2019-11-04 9:21 ` Bartosz Golaszewski
0 siblings, 1 reply; 11+ messages in thread
From: Pavel Machek @ 2019-11-04 9:09 UTC (permalink / raw)
To: Bartosz Golaszewski
Cc: Rob Herring, Mark Rutland, Dmitry Torokhov, Jacek Anaszewski,
Dan Murphy, Lee Jones, Sebastian Reichel, Liam Girdwood,
Mark Brown, linux-input, devicetree, linux-kernel, linux-leds,
linux-pm, Bartosz Golaszewski
[-- Attachment #1: Type: text/plain, Size: 385 bytes --]
Hi!
> From: Bartosz Golaszewski <bgolaszewski@baylibre.com>
>
> Convert the binding document for max77650 LED module to yaml.
>
> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH 5/6] dt-bindings: leds: max77650: convert the binding document to yaml
2019-11-04 9:09 ` Pavel Machek
@ 2019-11-04 9:21 ` Bartosz Golaszewski
0 siblings, 0 replies; 11+ messages in thread
From: Bartosz Golaszewski @ 2019-11-04 9:21 UTC (permalink / raw)
To: Pavel Machek
Cc: Bartosz Golaszewski, Rob Herring, Mark Rutland, Dmitry Torokhov,
Jacek Anaszewski, Dan Murphy, Lee Jones, Sebastian Reichel,
Liam Girdwood, Mark Brown, Linux Input, linux-devicetree, LKML,
Linux LED Subsystem, linux-pm
pon., 4 lis 2019 o 10:09 Pavel Machek <pavel@ucw.cz> napisał(a):
>
> Hi!
>
> > From: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> >
> > Convert the binding document for max77650 LED module to yaml.
> >
> > Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
>
> Acked-by: Pavel Machek <pavel@ucw.cz>
>
Hi Pavel,
thanks for the Ack, but a much modified version of this is already in
Rob's branch.
Bart
> --
> (english) http://www.livejournal.com/~pavelmachek
> (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH 6/6] MAINTAINERS: update the list of maintained files for max77650
2019-09-30 13:02 [PATCH 0/6] dt-bindings: max77650: convert the device-tree bindings to yaml Bartosz Golaszewski
` (4 preceding siblings ...)
2019-09-30 13:02 ` [PATCH 5/6] dt-bindings: leds: " Bartosz Golaszewski
@ 2019-09-30 13:02 ` Bartosz Golaszewski
5 siblings, 0 replies; 11+ messages in thread
From: Bartosz Golaszewski @ 2019-09-30 13:02 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Dmitry Torokhov, Jacek Anaszewski,
Pavel Machek, Dan Murphy, Lee Jones, Sebastian Reichel,
Liam Girdwood, Mark Brown
Cc: linux-input, devicetree, linux-kernel, linux-leds, linux-pm,
Bartosz Golaszewski
From: Bartosz Golaszewski <bgolaszewski@baylibre.com>
The DT bindings for max77650 MFD have now been converted to yaml.
Update the MAINTAINERS entry for this set of drivers.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
MAINTAINERS | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/MAINTAINERS b/MAINTAINERS
index 296de2b51c83..d60dd3729437 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -9902,8 +9902,8 @@ MAXIM MAX77650 PMIC MFD DRIVER
M: Bartosz Golaszewski <bgolaszewski@baylibre.com>
L: linux-kernel@vger.kernel.org
S: Maintained
-F: Documentation/devicetree/bindings/*/*max77650.txt
-F: Documentation/devicetree/bindings/*/max77650*.txt
+F: Documentation/devicetree/bindings/*/*max77650.yaml
+F: Documentation/devicetree/bindings/*/max77650*.yaml
F: include/linux/mfd/max77650.h
F: drivers/mfd/max77650.c
F: drivers/regulator/max77650-regulator.c
--
2.23.0
^ permalink raw reply related [flat|nested] 11+ messages in thread