From: Krzysztof Kozlowski <krzk@kernel.org>
To: "Rob Herring" <robh+dt@kernel.org>,
"Mark Rutland" <mark.rutland@arm.com>,
"Thierry Reding" <thierry.reding@gmail.com>,
"Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>,
linux-clk@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
linux-leds@vger.kernel.org, linux-pwm@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-tegra@vger.kernel.org,
bcm-kernel-feedback-list@broadcom.com,
linux-rpi-kernel@lists.infradead.org,
linux-amlogic@lists.infradead.org,
linux-mediatek@lists.infradead.org,
linux-rockchip@lists.infradead.org,
linux-riscv@lists.infradead.org,
linux-stm32@st-md-mailman.stormreply.com
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Subject: [PATCH v3 2/2] dt-bindings: pwm: Convert Samsung PWM bindings to json-schema
Date: Wed, 2 Oct 2019 18:40:47 +0200 [thread overview]
Message-ID: <20191002164047.14499-2-krzk@kernel.org> (raw)
In-Reply-To: <20191002164047.14499-1-krzk@kernel.org>
Convert Samsung PWM (S3C, S5P and Exynos SoCs) bindings to DT schema
format using json-schema.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
Changes since v2:
1. Add additionalProperties: false.
Changes since v1:
1. Indent example with four spaces (more readable),
2. Fix samsung,pwm-outputs after review,
3. Remove double-quotes from clock names.
---
.../devicetree/bindings/pwm/pwm-samsung.txt | 51 --------
.../devicetree/bindings/pwm/pwm-samsung.yaml | 109 ++++++++++++++++++
2 files changed, 109 insertions(+), 51 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/pwm/pwm-samsung.txt
create mode 100644 Documentation/devicetree/bindings/pwm/pwm-samsung.yaml
diff --git a/Documentation/devicetree/bindings/pwm/pwm-samsung.txt b/Documentation/devicetree/bindings/pwm/pwm-samsung.txt
deleted file mode 100644
index 5538de9c2007..000000000000
--- a/Documentation/devicetree/bindings/pwm/pwm-samsung.txt
+++ /dev/null
@@ -1,51 +0,0 @@
-* Samsung PWM timers
-
-Samsung SoCs contain PWM timer blocks which can be used for system clock source
-and clock event timers, as well as to drive SoC outputs with PWM signal. Each
-PWM timer block provides 5 PWM channels (not all of them can drive physical
-outputs - see SoC and board manual).
-
-Be aware that the clocksource driver supports only uniprocessor systems.
-
-Required properties:
-- compatible : should be one of following:
- samsung,s3c2410-pwm - for 16-bit timers present on S3C24xx SoCs
- samsung,s3c6400-pwm - for 32-bit timers present on S3C64xx SoCs
- samsung,s5p6440-pwm - for 32-bit timers present on S5P64x0 SoCs
- samsung,s5pc100-pwm - for 32-bit timers present on S5PC100, S5PV210,
- Exynos4210 rev0 SoCs
- samsung,exynos4210-pwm - for 32-bit timers present on Exynos4210,
- Exynos4x12, Exynos5250 and Exynos5420 SoCs
-- reg: base address and size of register area
-- interrupts: list of timer interrupts (one interrupt per timer, starting at
- timer 0)
-- clock-names: should contain all following required clock names:
- - "timers" - PWM base clock used to generate PWM signals,
- and any subset of following optional clock names:
- - "pwm-tclk0" - first external PWM clock source,
- - "pwm-tclk1" - second external PWM clock source.
- Note that not all IP variants allow using all external clock sources.
- Refer to SoC documentation to learn which clock source configurations
- are available.
-- clocks: should contain clock specifiers of all clocks, which input names
- have been specified in clock-names property, in same order.
-- #pwm-cells: should be 3. See pwm.txt in this directory for a description of
- the cells format. The only third cell flag supported by this binding is
- PWM_POLARITY_INVERTED.
-
-Optional properties:
-- samsung,pwm-outputs: list of PWM channels used as PWM outputs on particular
- platform - an array of up to 5 elements being indices of PWM channels
- (from 0 to 4), the order does not matter.
-
-Example:
- pwm@7f006000 {
- compatible = "samsung,s3c6400-pwm";
- reg = <0x7f006000 0x1000>;
- interrupt-parent = <&vic0>;
- interrupts = <23>, <24>, <25>, <27>, <28>;
- clocks = <&clock 67>;
- clock-names = "timers";
- samsung,pwm-outputs = <0>, <1>;
- #pwm-cells = <3>;
- }
diff --git a/Documentation/devicetree/bindings/pwm/pwm-samsung.yaml b/Documentation/devicetree/bindings/pwm/pwm-samsung.yaml
new file mode 100644
index 000000000000..ea7f32905172
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/pwm-samsung.yaml
@@ -0,0 +1,109 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/pwm-samsung.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung SoC PWM timers
+
+maintainers:
+ - Thierry Reding <thierry.reding@gmail.com>
+ - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |+
+ Samsung SoCs contain PWM timer blocks which can be used for system clock source
+ and clock event timers, as well as to drive SoC outputs with PWM signal. Each
+ PWM timer block provides 5 PWM channels (not all of them can drive physical
+ outputs - see SoC and board manual).
+
+ Be aware that the clocksource driver supports only uniprocessor systems.
+
+allOf:
+ - $ref: pwm.yaml#
+
+properties:
+ compatible:
+ enum:
+ - samsung,s3c2410-pwm # 16-bit, S3C24xx
+ - samsung,s3c6400-pwm # 32-bit, S3C64xx
+ - samsung,s5p6440-pwm # 32-bit, S5P64x0
+ - samsung,s5pc100-pwm # 32-bit, S5PC100, S5PV210, Exynos4210 rev0 SoCs
+ - samsung,exynos4210-pwm # 32-bit, Exynos
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ minItems: 1
+ maxItems: 3
+
+ clock-names:
+ description: |
+ Should contain all following required clock names:
+ - "timers" - PWM base clock used to generate PWM signals,
+ and any subset of following optional clock names:
+ - "pwm-tclk0" - first external PWM clock source,
+ - "pwm-tclk1" - second external PWM clock source.
+ Note that not all IP variants allow using all external clock sources.
+ Refer to SoC documentation to learn which clock source configurations
+ are available.
+ oneOf:
+ - items:
+ - const: timers
+ - items:
+ - const: timers
+ - const: pwm-tclk0
+ - items:
+ - const: timers
+ - const: pwm-tclk1
+ - items:
+ - const: timers
+ - const: pwm-tclk0
+ - const: pwm-tclk1
+
+ interrupts:
+ description:
+ One interrupt per timer, starting at timer 0.
+ minItems: 1
+ maxItems: 5
+
+ "#pwm-cells":
+ description:
+ The only third cell flag supported by this binding
+ is PWM_POLARITY_INVERTED.
+ const: 3
+
+ samsung,pwm-outputs:
+ description:
+ A list of PWM channels used as PWM outputs on particular platform.
+ It is an array of up to 5 elements being indices of PWM channels
+ (from 0 to 4), the order does not matter.
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32-array
+ - uniqueItems: true
+ - items:
+ minimum: 0
+ maximum: 4
+
+required:
+ - clocks
+ - clock-names
+ - compatible
+ - interrupts
+ - "#pwm-cells"
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ pwm@7f006000 {
+ compatible = "samsung,s3c6400-pwm";
+ reg = <0x7f006000 0x1000>;
+ interrupt-parent = <&vic0>;
+ interrupts = <23>, <24>, <25>, <27>, <28>;
+ clocks = <&clock 67>;
+ clock-names = "timers";
+ samsung,pwm-outputs = <0>, <1>;
+ #pwm-cells = <3>;
+ };
--
2.17.1
next prev parent reply other threads:[~2019-10-02 16:41 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-02 16:40 [PATCH v3 1/2] dt-bindings: pwm: Convert PWM bindings to json-schema Krzysztof Kozlowski
2019-10-02 16:40 ` Krzysztof Kozlowski [this message]
2019-10-10 18:58 ` [PATCH v3 2/2] dt-bindings: pwm: Convert Samsung " Rob Herring
2019-10-08 23:46 ` [PATCH v3 1/2] dt-bindings: pwm: Convert " Paul Walmsley
2019-10-10 18:54 ` Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191002164047.14499-2-krzk@kernel.org \
--to=krzk@kernel.org \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-leds@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-pwm@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=linux-rpi-kernel@lists.infradead.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=linux-tegra@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=thierry.reding@gmail.com \
--cc=u.kleine-koenig@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).