Linux-LEDs Archive on lore.kernel.org
 help / color / Atom feed
From: Dan Murphy <dmurphy@ti.com>
To: <jacek.anaszewski@gmail.com>, <pavel@ucw.cz>
Cc: <linux-leds@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	Dan Murphy <dmurphy@ti.com>
Subject: [PATCH v12 07/16] dt: bindings: lp55xx: Be consistent in the document with LED acronym
Date: Fri, 11 Oct 2019 08:06:48 -0500
Message-ID: <20191011130657.4713-8-dmurphy@ti.com> (raw)
In-Reply-To: <20191011130657.4713-1-dmurphy@ti.com>

Update the document to be consistent in case when using "LED".
This acronym should be capital throughout the document.

Signed-off-by: Dan Murphy <dmurphy@ti.com>
---
 Documentation/devicetree/bindings/leds/leds-lp55xx.txt | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/leds/leds-lp55xx.txt b/Documentation/devicetree/bindings/leds/leds-lp55xx.txt
index 1b66a413fb9d..bfe2805c5534 100644
--- a/Documentation/devicetree/bindings/leds/leds-lp55xx.txt
+++ b/Documentation/devicetree/bindings/leds/leds-lp55xx.txt
@@ -1,4 +1,4 @@
-Binding for TI/National Semiconductor LP55xx Led Drivers
+Binding for TI/National Semiconductor LP55xx LED Drivers
 
 Required properties:
 - compatible: one of
@@ -12,8 +12,8 @@ Required properties:
 - clock-mode: Input clock mode, (0: automode, 1: internal, 2: external)
 
 Each child has own specific current settings
-- led-cur: Current setting at each led channel (mA x10, 0 if led is not connected)
-- max-cur: Maximun current at each led channel.
+- led-cur: Current setting at each LED channel (mA x10, 0 if LED is not connected)
+- max-cur: Maximun current at each LED channel.
 
 Optional properties:
 - enable-gpio: GPIO attached to the chip's enable pin
-- 
2.22.0.214.g8dca754b1e


  parent reply index

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-11 13:06 [PATCH v12 00/16] Multicolor Framework v12 Dan Murphy
2019-10-11 13:06 ` [PATCH v12 01/16] dt: bindings: Add multicolor class dt bindings documention Dan Murphy
2019-10-11 13:06 ` [PATCH v12 02/16] dt-bindings: leds: Add multicolor ID to the color ID list Dan Murphy
2019-10-11 13:06 ` [PATCH v12 03/16] " Dan Murphy
2019-10-11 13:06 ` [PATCH v12 04/16] leds: multicolor: Introduce a multicolor class definition Dan Murphy
2019-10-11 19:53   ` Jacek Anaszewski
2019-10-14  6:18   ` kbuild test robot
2019-10-11 13:06 ` [PATCH v12 05/16] dt: bindings: lp50xx: Introduce the lp50xx family of RGB drivers Dan Murphy
2019-10-11 13:06 ` [PATCH v12 06/16] leds: lp50xx: Add the LP50XX family of the RGB LED driver Dan Murphy
2019-10-11 20:04   ` Jacek Anaszewski
2019-10-14  9:17   ` kbuild test robot
2019-10-19 17:13     ` Jacek Anaszewski
2019-10-11 13:06 ` Dan Murphy [this message]
2019-10-11 13:06 ` [PATCH v12 08/16] dt: bindings: lp55xx: Update binding for Multicolor Framework Dan Murphy
2019-10-11 20:15   ` Jacek Anaszewski
2019-10-12  0:54     ` Dan Murphy
2019-10-12 13:32       ` Jacek Anaszewski
2019-10-11 13:06 ` [PATCH v12 09/16] ARM: dts: n900: Add reg property to the LP5523 channel node Dan Murphy
2019-10-11 13:06 ` [PATCH v12 10/16] ARM: dts: imx6dl-yapp4: Add reg property to the lp5562 " Dan Murphy
2019-10-11 13:06 ` [PATCH v12 11/16] ARM: dts: ste-href: Add reg property to the LP5521 channel nodes Dan Murphy
2019-10-11 13:06 ` [PATCH v12 12/16] leds: lp55xx: Add multicolor framework support to lp55xx Dan Murphy
2019-10-11 20:36   ` Jacek Anaszewski
2019-10-12  0:50     ` Dan Murphy
2019-10-12 13:27       ` Jacek Anaszewski
2019-10-11 13:06 ` [PATCH v12 13/16] leds: lp5523: Update the lp5523 code to add intensity function Dan Murphy
2019-10-11 13:06 ` [PATCH v12 14/16] leds: lp5521: Add multicolor framework intensity support Dan Murphy
2019-10-11 13:06 ` [PATCH v12 15/16] leds: lp55xx: Fix checkpatch file permissions issues Dan Murphy
2019-10-11 13:06 ` [PATCH v12 16/16] leds: lp5523: Fix checkpatch issues in the code Dan Murphy
2019-10-11 19:40 ` [PATCH v12 00/16] Multicolor Framework v12 Jacek Anaszewski
2019-10-12  0:48   ` Dan Murphy

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191011130657.4713-8-dmurphy@ti.com \
    --to=dmurphy@ti.com \
    --cc=jacek.anaszewski@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-leds@vger.kernel.org \
    --cc=pavel@ucw.cz \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-LEDs Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-leds/0 linux-leds/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-leds linux-leds/ https://lore.kernel.org/linux-leds \
		linux-leds@vger.kernel.org linux-leds@archiver.kernel.org
	public-inbox-index linux-leds

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-leds


AGPL code for this site: git clone https://public-inbox.org/ public-inbox