Linux-LEDs Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH 0/2] leds: lm3692x: Allow to set ovp and brigthness mode
@ 2019-12-16 12:28 Guido Günther
  2019-12-16 12:28 ` [PATCH 1/2] dt: bindings: lm3692x: Document new properties Guido Günther
  2019-12-16 12:28 ` [PATCH 2/2] leds: lm3692x: Allow to set ovp and brigthness mode Guido Günther
  0 siblings, 2 replies; 15+ messages in thread
From: Guido Günther @ 2019-12-16 12:28 UTC (permalink / raw)
  To: Jacek Anaszewski, Pavel Machek, Dan Murphy, Rob Herring,
	Mark Rutland, linux-leds, devicetree, linux-kernel

Overvoltage protection and brightness mode are currently hardcoded
as disabled in the driver. Make these configurable via DT.

Guido Günther (2):
  dt: bindings: lm3692x: Document new properties
  leds: lm3692x: Allow to set ovp and brigthness mode

 .../devicetree/bindings/leds/leds-lm3692x.txt |  4 ++
 drivers/leds/leds-lm3692x.c                   | 43 ++++++++++++++++---
 2 files changed, 41 insertions(+), 6 deletions(-)

-- 
2.23.0


^ permalink raw reply	[flat|nested] 15+ messages in thread

end of thread, back to index

Thread overview: 15+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-12-16 12:28 [PATCH 0/2] leds: lm3692x: Allow to set ovp and brigthness mode Guido Günther
2019-12-16 12:28 ` [PATCH 1/2] dt: bindings: lm3692x: Document new properties Guido Günther
2019-12-17 12:41   ` Dan Murphy
2019-12-21 19:15   ` Pavel Machek
2019-12-24 11:45     ` Guido Günther
2019-12-26 19:19   ` Rob Herring
2019-12-27 10:16     ` Guido Günther
2019-12-16 12:28 ` [PATCH 2/2] leds: lm3692x: Allow to set ovp and brigthness mode Guido Günther
2019-12-17 12:53   ` Dan Murphy
2019-12-17 15:40     ` Guido Günther
2019-12-17 17:01       ` Dan Murphy
2019-12-21 19:17     ` Pavel Machek
2019-12-24 11:30     ` Guido Günther
2019-12-21 19:18   ` Pavel Machek
2019-12-24 11:26     ` Guido Günther

Linux-LEDs Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-leds/0 linux-leds/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-leds linux-leds/ https://lore.kernel.org/linux-leds \
		linux-leds@vger.kernel.org
	public-inbox-index linux-leds

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-leds


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git