Linux-LEDs Archive on lore.kernel.org
 help / color / Atom feed
From: Dan Murphy <dmurphy@ti.com>
To: <jacek.anaszewski@gmail.com>, <pavel@ucw.cz>
Cc: <linux-leds@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	Dan Murphy <dmurphy@ti.com>,
	Linus Walleij <linus.walleij@linaro.org>
Subject: [RESEND PATCH v17 10/17] ARM: dts: ste-href: Add reg property to the LP5521 channel nodes
Date: Mon, 27 Jan 2020 09:00:25 -0600
Message-ID: <20200127150032.31350-11-dmurphy@ti.com> (raw)
In-Reply-To: <20200127150032.31350-1-dmurphy@ti.com>

Add the reg property to each channel node.  This update is
to accomodate the multicolor framework.  In addition to the
accomodation this allows the LEDs to be placed on any channel
and allow designs to skip channels as opposed to requiring
sequential order.

Signed-off-by: Dan Murphy <dmurphy@ti.com>
CC: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
---
 arch/arm/boot/dts/ste-href.dtsi | 22 ++++++++++++++++------
 1 file changed, 16 insertions(+), 6 deletions(-)

diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi
index 4f6acbd8c040..8a873da102d3 100644
--- a/arch/arm/boot/dts/ste-href.dtsi
+++ b/arch/arm/boot/dts/ste-href.dtsi
@@ -56,16 +56,21 @@ lp5521@33 {
 				reg = <0x33>;
 				label = "lp5521_pri";
 				clock-mode = /bits/ 8 <2>;
-				chan0 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				chan@0 {
+					reg = <0>;
 					led-cur = /bits/ 8 <0x2f>;
 					max-cur = /bits/ 8 <0x5f>;
 					linux,default-trigger = "heartbeat";
 				};
-				chan1 {
+				chan@1 {
+					reg = <1>;
 					led-cur = /bits/ 8 <0x2f>;
 					max-cur = /bits/ 8 <0x5f>;
 				};
-				chan2 {
+				chan@2 {
+					reg = <2>;
 					led-cur = /bits/ 8 <0x2f>;
 					max-cur = /bits/ 8 <0x5f>;
 				};
@@ -75,15 +80,20 @@ lp5521@34 {
 				reg = <0x34>;
 				label = "lp5521_sec";
 				clock-mode = /bits/ 8 <2>;
-				chan0 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				chan@0 {
+					reg = <0>;
 					led-cur = /bits/ 8 <0x2f>;
 					max-cur = /bits/ 8 <0x5f>;
 				};
-				chan1 {
+				chan@1 {
+					reg = <1>;
 					led-cur = /bits/ 8 <0x2f>;
 					max-cur = /bits/ 8 <0x5f>;
 				};
-				chan2 {
+				chan@2 {
+					reg = <2>;
 					led-cur = /bits/ 8 <0x2f>;
 					max-cur = /bits/ 8 <0x5f>;
 				};
-- 
2.25.0


  parent reply index

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-01-27 15:00 [RESEND PATCH v17 00/17] Multi Color LED Framework Dan Murphy
2020-01-27 15:00 ` [RESEND PATCH v17 01/17] dt-bindings: leds: Add multicolor ID to the color ID list Dan Murphy
2020-01-27 15:00 ` [RESEND PATCH v17 02/17] " Dan Murphy
2020-01-27 15:00 ` [RESEND PATCH v17 03/17] leds: multicolor: Introduce a multicolor class definition Dan Murphy
2020-01-27 15:00 ` [RESEND PATCH v17 04/17] dt: bindings: lp50xx: Introduce the lp50xx family of RGB drivers Dan Murphy
2020-01-27 15:00 ` [RESEND PATCH v17 05/17] leds: lp50xx: Add the LP50XX family of the RGB LED driver Dan Murphy
2020-01-27 15:00 ` [RESEND PATCH v17 06/17] dt: bindings: lp55xx: Be consistent in the document with LED acronym Dan Murphy
2020-01-27 15:00 ` [RESEND PATCH v17 07/17] dt: bindings: lp55xx: Update binding for Multicolor Framework Dan Murphy
2020-01-27 15:00 ` [RESEND PATCH v17 08/17] ARM: dts: n900: Add reg property to the LP5523 channel node Dan Murphy
2020-01-27 15:00 ` [RESEND PATCH v17 09/17] ARM: dts: imx6dl-yapp4: Add reg property to the lp5562 " Dan Murphy
2020-01-27 15:00 ` Dan Murphy [this message]
2020-01-27 15:00 ` [RESEND PATCH v17 11/17] leds: lp55xx: Convert LED class registration to devm_* Dan Murphy
2020-01-27 15:00 ` [RESEND PATCH v17 12/17] leds: lp55xx: Add multicolor framework support to lp55xx Dan Murphy
2020-01-27 15:00 ` [RESEND PATCH v17 13/17] leds: lp5523: Update the lp5523 code to add multicolor brightness function Dan Murphy
2020-01-27 15:00 ` [RESEND PATCH v17 14/17] leds: lp5521: Add multicolor framework multicolor brightness support Dan Murphy
2020-01-27 15:00 ` [RESEND PATCH v17 15/17] leds: lp55xx: Fix checkpatch file permissions issues Dan Murphy
2020-01-27 15:00 ` [RESEND PATCH v17 16/17] leds: lp5523: Fix checkpatch issues in the code Dan Murphy
2020-01-27 15:00 ` [RESEND PATCH v17 17/17] dt: bindings: Update lp55xx binding to recommended LED naming Dan Murphy
2020-02-12 13:09 ` [RESEND PATCH v17 00/17] Multi Color LED Framework Dan Murphy
2020-02-25 10:19   ` Pavel Machek
2020-02-25 22:17     ` Jacek Anaszewski
2020-02-25 22:44       ` Dan Murphy
2020-02-26 12:59       ` Pavel Machek
2020-02-26 20:45         ` Jacek Anaszewski
2020-02-26 22:10           ` Dan Murphy
2020-02-27 10:58           ` Pavel Machek
2020-02-27 12:43             ` Greg KH
2020-02-27 13:07               ` Dan Murphy
2020-02-27 13:29                 ` Dan Murphy
2020-02-27 21:22                 ` Jacek Anaszewski
2020-02-28  7:42                   ` Greg KH
2020-02-28  9:34                     ` Pavel Machek
2020-02-28 12:30                     ` Dan Murphy
2020-02-28  9:39                   ` Pavel Machek

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200127150032.31350-11-dmurphy@ti.com \
    --to=dmurphy@ti.com \
    --cc=jacek.anaszewski@gmail.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-leds@vger.kernel.org \
    --cc=pavel@ucw.cz \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-LEDs Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-leds/0 linux-leds/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-leds linux-leds/ https://lore.kernel.org/linux-leds \
		linux-leds@vger.kernel.org
	public-inbox-index linux-leds

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-leds


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git