Linux-LEDs Archive on lore.kernel.org
 help / color / Atom feed
From: Dan Murphy <dmurphy@ti.com>
To: <jacek.anaszewski@gmail.com>, <pavel@ucw.cz>
Cc: <linux-leds@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	Dan Murphy <dmurphy@ti.com>
Subject: [RESEND PATCH v17 13/17] leds: lp5523: Update the lp5523 code to add multicolor brightness function
Date: Mon, 27 Jan 2020 09:00:28 -0600
Message-ID: <20200127150032.31350-14-dmurphy@ti.com> (raw)
In-Reply-To: <20200127150032.31350-1-dmurphy@ti.com>

Add the multicolor brightness call back to support the multicolor
framework.  This call back allows setting  brightness on grouped channels
in a single function.

Signed-off-by: Dan Murphy <dmurphy@ti.com>
---
 drivers/leds/leds-lp5523.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/drivers/leds/leds-lp5523.c b/drivers/leds/leds-lp5523.c
index b076c16df9ab..609288077917 100644
--- a/drivers/leds/leds-lp5523.c
+++ b/drivers/leds/leds-lp5523.c
@@ -791,6 +791,25 @@ static ssize_t store_master_fader_leds(struct device *dev,
 	return ret;
 }
 
+static int lp5523_multicolor_brightness(struct lp55xx_led *led)
+{
+	struct lp55xx_chip *chip = led->chip;
+	int ret;
+	int i;
+
+	mutex_lock(&chip->lock);
+	for (i = 0; i < led->mc_cdev.num_leds; i++) {
+		ret = lp55xx_write(chip,
+				   LP5523_REG_LED_PWM_BASE +
+				   led->color_components[i].output_num,
+				   led->color_components[i].brightness);
+		if (ret)
+			break;
+	}
+	mutex_unlock(&chip->lock);
+	return ret;
+}
+
 static int lp5523_led_brightness(struct lp55xx_led *led)
 {
 	struct lp55xx_chip *chip = led->chip;
@@ -857,6 +876,7 @@ static struct lp55xx_device_config lp5523_cfg = {
 	.max_channel  = LP5523_MAX_LEDS,
 	.post_init_device   = lp5523_post_init_device,
 	.brightness_fn      = lp5523_led_brightness,
+	.multicolor_brightness_fn = lp5523_multicolor_brightness,
 	.set_led_current    = lp5523_set_led_current,
 	.firmware_cb        = lp5523_firmware_loaded,
 	.run_engine         = lp5523_run_engine,
-- 
2.25.0


  parent reply index

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-01-27 15:00 [RESEND PATCH v17 00/17] Multi Color LED Framework Dan Murphy
2020-01-27 15:00 ` [RESEND PATCH v17 01/17] dt-bindings: leds: Add multicolor ID to the color ID list Dan Murphy
2020-01-27 15:00 ` [RESEND PATCH v17 02/17] " Dan Murphy
2020-01-27 15:00 ` [RESEND PATCH v17 03/17] leds: multicolor: Introduce a multicolor class definition Dan Murphy
2020-01-27 15:00 ` [RESEND PATCH v17 04/17] dt: bindings: lp50xx: Introduce the lp50xx family of RGB drivers Dan Murphy
2020-01-27 15:00 ` [RESEND PATCH v17 05/17] leds: lp50xx: Add the LP50XX family of the RGB LED driver Dan Murphy
2020-01-27 15:00 ` [RESEND PATCH v17 06/17] dt: bindings: lp55xx: Be consistent in the document with LED acronym Dan Murphy
2020-01-27 15:00 ` [RESEND PATCH v17 07/17] dt: bindings: lp55xx: Update binding for Multicolor Framework Dan Murphy
2020-01-27 15:00 ` [RESEND PATCH v17 08/17] ARM: dts: n900: Add reg property to the LP5523 channel node Dan Murphy
2020-01-27 15:00 ` [RESEND PATCH v17 09/17] ARM: dts: imx6dl-yapp4: Add reg property to the lp5562 " Dan Murphy
2020-01-27 15:00 ` [RESEND PATCH v17 10/17] ARM: dts: ste-href: Add reg property to the LP5521 channel nodes Dan Murphy
2020-01-27 15:00 ` [RESEND PATCH v17 11/17] leds: lp55xx: Convert LED class registration to devm_* Dan Murphy
2020-01-27 15:00 ` [RESEND PATCH v17 12/17] leds: lp55xx: Add multicolor framework support to lp55xx Dan Murphy
2020-01-27 15:00 ` Dan Murphy [this message]
2020-01-27 15:00 ` [RESEND PATCH v17 14/17] leds: lp5521: Add multicolor framework multicolor brightness support Dan Murphy
2020-01-27 15:00 ` [RESEND PATCH v17 15/17] leds: lp55xx: Fix checkpatch file permissions issues Dan Murphy
2020-01-27 15:00 ` [RESEND PATCH v17 16/17] leds: lp5523: Fix checkpatch issues in the code Dan Murphy
2020-01-27 15:00 ` [RESEND PATCH v17 17/17] dt: bindings: Update lp55xx binding to recommended LED naming Dan Murphy
2020-02-12 13:09 ` [RESEND PATCH v17 00/17] Multi Color LED Framework Dan Murphy
2020-02-25 10:19   ` Pavel Machek
2020-02-25 22:17     ` Jacek Anaszewski
2020-02-25 22:44       ` Dan Murphy
2020-02-26 12:59       ` Pavel Machek
2020-02-26 20:45         ` Jacek Anaszewski
2020-02-26 22:10           ` Dan Murphy
2020-02-27 10:58           ` Pavel Machek
2020-02-27 12:43             ` Greg KH
2020-02-27 13:07               ` Dan Murphy
2020-02-27 13:29                 ` Dan Murphy
2020-02-27 21:22                 ` Jacek Anaszewski
2020-02-28  7:42                   ` Greg KH
2020-02-28  9:34                     ` Pavel Machek
2020-02-28 12:30                     ` Dan Murphy
2020-02-28  9:39                   ` Pavel Machek

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200127150032.31350-14-dmurphy@ti.com \
    --to=dmurphy@ti.com \
    --cc=jacek.anaszewski@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-leds@vger.kernel.org \
    --cc=pavel@ucw.cz \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-LEDs Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-leds/0 linux-leds/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-leds linux-leds/ https://lore.kernel.org/linux-leds \
		linux-leds@vger.kernel.org
	public-inbox-index linux-leds

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-leds


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git