Linux-LEDs Archive on lore.kernel.org
 help / color / Atom feed
From: Linus Walleij <linus.walleij@linaro.org>
To: Jacek Anaszewski <jacek.anaszewski@gmail.com>,
	Pavel Machek <pavel@ucw.cz>, Dan Murphy <dmurphy@ti.com>
Cc: linux-leds@vger.kernel.org,
	Linus Walleij <linus.walleij@linaro.org>,
	Ben Dooks <ben-linux@fluff.org>,
	Sylwester Nawrocki <sylvester.nawrocki@gmail.com>,
	Krzysztof Kozlowski <krzk@kernel.org>
Subject: [PATCH] leds: s3c24xx: Convert to use GPIO descriptors
Date: Sat, 27 Jun 2020 02:10:15 +0200
Message-ID: <20200627001015.427376-1-linus.walleij@linaro.org> (raw)

This converts the s3c24xx LED driver to use GPIO descriptors
and also modify all board files to account for these changes
by registering the appropriate GPIO tables for each board.

The driver was using a custom flag to indicate open drain
(tristate) but this can be handled by standard descriptor
machine tables.

The driver was setting non-pull-up for the pin using the custom
S3C24xx GPIO API, but this is a custom pin control system used
by the S3C24xx and no generic GPIO function, so this has simply
been pushed back into the respective board files.

Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Sylwester Nawrocki <sylvester.nawrocki@gmail.com>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
 arch/arm/mach-s3c24xx/common-smdk.c        | 67 +++++++++++++++-------
 arch/arm/mach-s3c24xx/mach-mini2440.c      | 63 +++++++++++++++++---
 arch/arm/mach-s3c24xx/mach-n30.c           | 54 +++++++++++++++--
 arch/arm/mach-s3c24xx/mach-qt2410.c        | 12 +++-
 arch/arm/mach-s3c24xx/mach-vr1000.c        | 38 +++++++++++-
 drivers/leds/leds-s3c24xx.c                | 37 +++---------
 include/linux/platform_data/leds-s3c24xx.h |  6 --
 7 files changed, 200 insertions(+), 77 deletions(-)

diff --git a/arch/arm/mach-s3c24xx/common-smdk.c b/arch/arm/mach-s3c24xx/common-smdk.c
index 58e30cad386c..10fc804c4ec5 100644
--- a/arch/arm/mach-s3c24xx/common-smdk.c
+++ b/arch/arm/mach-s3c24xx/common-smdk.c
@@ -14,6 +14,7 @@
 #include <linux/timer.h>
 #include <linux/init.h>
 #include <linux/gpio.h>
+#include <linux/gpio/machine.h>
 #include <linux/device.h>
 #include <linux/platform_device.h>
 
@@ -44,29 +45,53 @@
 
 /* LED devices */
 
+static struct gpiod_lookup_table smdk_led4_gpio_table = {
+	.dev_id = "s3c24xx_led.0",
+	.table = {
+		GPIO_LOOKUP("GPF", 4, NULL, GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN),
+		{ },
+	},
+};
+
+static struct gpiod_lookup_table smdk_led5_gpio_table = {
+	.dev_id = "s3c24xx_led.1",
+	.table = {
+		GPIO_LOOKUP("GPF", 6, NULL, GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN),
+		{ },
+	},
+};
+
+static struct gpiod_lookup_table smdk_led6_gpio_table = {
+	.dev_id = "s3c24xx_led.2",
+	.table = {
+		GPIO_LOOKUP("GPF", 5, NULL, GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN),
+		{ },
+	},
+};
+
+static struct gpiod_lookup_table smdk_led7_gpio_table = {
+	.dev_id = "s3c24xx_led.3",
+	.table = {
+		GPIO_LOOKUP("GPF", 7, NULL, GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN),
+		{ },
+	},
+};
+
 static struct s3c24xx_led_platdata smdk_pdata_led4 = {
-	.gpio		= S3C2410_GPF(4),
-	.flags		= S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
 	.name		= "led4",
 	.def_trigger	= "timer",
 };
 
 static struct s3c24xx_led_platdata smdk_pdata_led5 = {
-	.gpio		= S3C2410_GPF(5),
-	.flags		= S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
 	.name		= "led5",
 	.def_trigger	= "nand-disk",
 };
 
 static struct s3c24xx_led_platdata smdk_pdata_led6 = {
-	.gpio		= S3C2410_GPF(6),
-	.flags		= S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
 	.name		= "led6",
 };
 
 static struct s3c24xx_led_platdata smdk_pdata_led7 = {
-	.gpio		= S3C2410_GPF(7),
-	.flags		= S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
 	.name		= "led7",
 };
 
@@ -179,27 +204,25 @@ static struct platform_device __initdata *smdk_devs[] = {
 	&smdk_led7,
 };
 
-static const struct gpio smdk_led_gpios[] = {
-	{ S3C2410_GPF(4), GPIOF_OUT_INIT_HIGH, NULL },
-	{ S3C2410_GPF(5), GPIOF_OUT_INIT_HIGH, NULL },
-	{ S3C2410_GPF(6), GPIOF_OUT_INIT_HIGH, NULL },
-	{ S3C2410_GPF(7), GPIOF_OUT_INIT_HIGH, NULL },
-};
-
 void __init smdk_machine_init(void)
 {
-	/* Configure the LEDs (even if we have no LED support)*/
-
-	int ret = gpio_request_array(smdk_led_gpios,
-				     ARRAY_SIZE(smdk_led_gpios));
-	if (!WARN_ON(ret < 0))
-		gpio_free_array(smdk_led_gpios, ARRAY_SIZE(smdk_led_gpios));
-
 	if (machine_is_smdk2443())
 		smdk_nand_info.twrph0 = 50;
 
 	s3c_nand_set_platdata(&smdk_nand_info);
 
+	/* Disable pull-up on the LED lines */
+	s3c_gpio_setpull(S3C2410_GPF(4), S3C_GPIO_PULL_NONE);
+	s3c_gpio_setpull(S3C2410_GPF(5), S3C_GPIO_PULL_NONE);
+	s3c_gpio_setpull(S3C2410_GPF(6), S3C_GPIO_PULL_NONE);
+	s3c_gpio_setpull(S3C2410_GPF(7), S3C_GPIO_PULL_NONE);
+
+	/* Add lookups for the lines */
+	gpiod_add_lookup_table(&smdk_led4_gpio_table);
+	gpiod_add_lookup_table(&smdk_led5_gpio_table);
+	gpiod_add_lookup_table(&smdk_led6_gpio_table);
+	gpiod_add_lookup_table(&smdk_led7_gpio_table);
+
 	platform_add_devices(smdk_devs, ARRAY_SIZE(smdk_devs));
 
 	s3c_pm_init();
diff --git a/arch/arm/mach-s3c24xx/mach-mini2440.c b/arch/arm/mach-s3c24xx/mach-mini2440.c
index 9035f868fb34..11add63b79c2 100644
--- a/arch/arm/mach-s3c24xx/mach-mini2440.c
+++ b/arch/arm/mach-s3c24xx/mach-mini2440.c
@@ -402,37 +402,68 @@ static struct platform_device mini2440_button_device = {
 
 /* LEDS */
 
+static struct gpiod_lookup_table mini2440_led1_gpio_table = {
+	.dev_id = "s3c24xx_led.1",
+	.table = {
+		GPIO_LOOKUP("GPB", 5, NULL, GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN),
+		{ },
+	},
+};
+
+static struct gpiod_lookup_table mini2440_led2_gpio_table = {
+	.dev_id = "s3c24xx_led.2",
+	.table = {
+		GPIO_LOOKUP("GPB", 6, NULL, GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN),
+		{ },
+	},
+};
+
+static struct gpiod_lookup_table mini2440_led3_gpio_table = {
+	.dev_id = "s3c24xx_led.3",
+	.table = {
+		GPIO_LOOKUP("GPB", 7, NULL, GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN),
+		{ },
+	},
+};
+
+static struct gpiod_lookup_table mini2440_led4_gpio_table = {
+	.dev_id = "s3c24xx_led.4",
+	.table = {
+		GPIO_LOOKUP("GPB", 8, NULL, GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN),
+		{ },
+	},
+};
+
+static struct gpiod_lookup_table mini2440_led5_gpio_table = {
+	.dev_id = "s3c24xx_led.5",
+	.table = {
+		GPIO_LOOKUP("GPG", 4, NULL, GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
 static struct s3c24xx_led_platdata mini2440_led1_pdata = {
 	.name		= "led1",
-	.gpio		= S3C2410_GPB(5),
-	.flags		= S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
 	.def_trigger	= "heartbeat",
 };
 
 static struct s3c24xx_led_platdata mini2440_led2_pdata = {
 	.name		= "led2",
-	.gpio		= S3C2410_GPB(6),
-	.flags		= S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
 	.def_trigger	= "nand-disk",
 };
 
 static struct s3c24xx_led_platdata mini2440_led3_pdata = {
 	.name		= "led3",
-	.gpio		= S3C2410_GPB(7),
-	.flags		= S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
 	.def_trigger	= "mmc0",
 };
 
 static struct s3c24xx_led_platdata mini2440_led4_pdata = {
 	.name		= "led4",
-	.gpio		= S3C2410_GPB(8),
-	.flags		= S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
 	.def_trigger	= "",
 };
 
 static struct s3c24xx_led_platdata mini2440_led_backlight_pdata = {
 	.name		= "backlight",
-	.gpio		= S3C2410_GPG(4),
 	.def_trigger	= "backlight",
 };
 
@@ -714,6 +745,20 @@ static void __init mini2440_init(void)
 	i2c_register_board_info(0, mini2440_i2c_devs,
 				ARRAY_SIZE(mini2440_i2c_devs));
 
+	/* Disable pull-up on the LED lines */
+	s3c_gpio_setpull(S3C2410_GPB(5), S3C_GPIO_PULL_NONE);
+	s3c_gpio_setpull(S3C2410_GPB(6), S3C_GPIO_PULL_NONE);
+	s3c_gpio_setpull(S3C2410_GPB(7), S3C_GPIO_PULL_NONE);
+	s3c_gpio_setpull(S3C2410_GPB(8), S3C_GPIO_PULL_NONE);
+	s3c_gpio_setpull(S3C2410_GPG(4), S3C_GPIO_PULL_NONE);
+
+	/* Add lookups for the lines */
+	gpiod_add_lookup_table(&mini2440_led1_gpio_table);
+	gpiod_add_lookup_table(&mini2440_led2_gpio_table);
+	gpiod_add_lookup_table(&mini2440_led3_gpio_table);
+	gpiod_add_lookup_table(&mini2440_led4_gpio_table);
+	gpiod_add_lookup_table(&mini2440_led5_gpio_table);
+
 	platform_add_devices(mini2440_devices, ARRAY_SIZE(mini2440_devices));
 
 	if (features.count)	/* the optional features */
diff --git a/arch/arm/mach-s3c24xx/mach-n30.c b/arch/arm/mach-s3c24xx/mach-n30.c
index d856f23939af..58a64f6d5fd0 100644
--- a/arch/arm/mach-s3c24xx/mach-n30.c
+++ b/arch/arm/mach-s3c24xx/mach-n30.c
@@ -45,6 +45,7 @@
 
 #include <plat/cpu.h>
 #include <plat/devs.h>
+#include <plat/gpio-cfg.h>
 #include <linux/platform_data/mmc-s3cmci.h>
 #include <linux/platform_data/usb-s3c2410_udc.h>
 #include <plat/samsung-time.h>
@@ -246,17 +247,33 @@ static struct platform_device n35_button_device = {
 };
 
 /* This is the bluetooth LED on the device. */
+
+static struct gpiod_lookup_table n30_blue_led_gpio_table = {
+	.dev_id = "s3c24xx_led.1",
+	.table = {
+		GPIO_LOOKUP("GPG", 6, NULL, GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
 static struct s3c24xx_led_platdata n30_blue_led_pdata = {
 	.name		= "blue_led",
-	.gpio		= S3C2410_GPG(6),
 	.def_trigger	= "",
 };
 
 /* This is the blue LED on the device. Originally used to indicate GPS activity
  * by flashing. */
+
+static struct gpiod_lookup_table n35_blue_led_gpio_table = {
+	.dev_id = "s3c24xx_led.1",
+	.table = {
+		GPIO_LOOKUP("GPD", 8, NULL, GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
 static struct s3c24xx_led_platdata n35_blue_led_pdata = {
 	.name		= "blue_led",
-	.gpio		= S3C2410_GPD(8),
 	.def_trigger	= "",
 };
 
@@ -264,17 +281,30 @@ static struct s3c24xx_led_platdata n35_blue_led_pdata = {
  * red, blinking green or solid green when the battery is low,
  * charging or full respectively.  By driving GPD9 low, it's possible
  * to force the LED to blink red, so call that warning LED.  */
+
+static struct gpiod_lookup_table n30_warning_led_gpio_table = {
+	.dev_id = "s3c24xx_led.2",
+	.table = {
+		GPIO_LOOKUP("GPD", 9, NULL, GPIO_ACTIVE_LOW),
+		{ },
+	},
+};
+
 static struct s3c24xx_led_platdata n30_warning_led_pdata = {
 	.name		= "warning_led",
-	.flags          = S3C24XX_LEDF_ACTLOW,
-	.gpio		= S3C2410_GPD(9),
 	.def_trigger	= "",
 };
 
+static struct gpiod_lookup_table n35_warning_led_gpio_table = {
+	.dev_id = "s3c24xx_led.2",
+	.table = {
+		GPIO_LOOKUP("GPD", 9, NULL, GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN),
+		{ },
+	},
+};
+
 static struct s3c24xx_led_platdata n35_warning_led_pdata = {
 	.name		= "warning_led",
-	.flags          = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
-	.gpio		= S3C2410_GPD(9),
 	.def_trigger	= "",
 };
 
@@ -577,6 +607,12 @@ static void __init n30_init(void)
 				      S3C2410_MISCCR_USBSUSPND0 |
 				      S3C2410_MISCCR_USBSUSPND1, 0x0);
 
+		/* Disable pull-up and add GPIO tables */
+		s3c_gpio_setpull(S3C2410_GPG(6), S3C_GPIO_PULL_NONE);
+		s3c_gpio_setpull(S3C2410_GPD(9), S3C_GPIO_PULL_NONE);
+		gpiod_add_lookup_table(&n30_blue_led_gpio_table);
+		gpiod_add_lookup_table(&n30_warning_led_gpio_table);
+
 		platform_add_devices(n30_devices, ARRAY_SIZE(n30_devices));
 	}
 
@@ -594,6 +630,12 @@ static void __init n30_init(void)
 				      S3C2410_MISCCR_USBSUSPND1,
 				      S3C2410_MISCCR_USBSUSPND0);
 
+		/* Disable pull-up and add GPIO tables */
+		s3c_gpio_setpull(S3C2410_GPD(8), S3C_GPIO_PULL_NONE);
+		s3c_gpio_setpull(S3C2410_GPD(9), S3C_GPIO_PULL_NONE);
+		gpiod_add_lookup_table(&n35_blue_led_gpio_table);
+		gpiod_add_lookup_table(&n35_warning_led_gpio_table);
+
 		platform_add_devices(n35_devices, ARRAY_SIZE(n35_devices));
 	}
 }
diff --git a/arch/arm/mach-s3c24xx/mach-qt2410.c b/arch/arm/mach-s3c24xx/mach-qt2410.c
index 5d48e5b6e738..ff9e3197309b 100644
--- a/arch/arm/mach-s3c24xx/mach-qt2410.c
+++ b/arch/arm/mach-s3c24xx/mach-qt2410.c
@@ -177,9 +177,15 @@ static struct platform_device qt2410_cs89x0 = {
 
 /* LED */
 
+static struct gpiod_lookup_table qt2410_led_gpio_table = {
+	.dev_id = "s3c24xx_led.0",
+	.table = {
+		GPIO_LOOKUP("GPB", 0, NULL, GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN),
+		{ },
+	},
+};
+
 static struct s3c24xx_led_platdata qt2410_pdata_led = {
-	.gpio		= S3C2410_GPB(0),
-	.flags		= S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
 	.name		= "led",
 	.def_trigger	= "timer",
 };
@@ -338,6 +344,8 @@ static void __init qt2410_machine_init(void)
 	s3c_i2c0_set_platdata(NULL);
 
 	gpiod_add_lookup_table(&qt2410_spi_gpiod_table);
+	s3c_gpio_setpull(S3C2410_GPB(0), S3C_GPIO_PULL_NONE);
+	gpiod_add_lookup_table(&qt2410_led_gpio_table);
 	platform_add_devices(qt2410_devices, ARRAY_SIZE(qt2410_devices));
 	s3c_pm_init();
 }
diff --git a/arch/arm/mach-s3c24xx/mach-vr1000.c b/arch/arm/mach-s3c24xx/mach-vr1000.c
index 853e74f9b8b5..6a3fb2becc7c 100644
--- a/arch/arm/mach-s3c24xx/mach-vr1000.c
+++ b/arch/arm/mach-s3c24xx/mach-vr1000.c
@@ -13,6 +13,7 @@
 #include <linux/timer.h>
 #include <linux/init.h>
 #include <linux/gpio.h>
+#include <linux/gpio/machine.h>
 #include <linux/dm9000.h>
 #include <linux/i2c.h>
 
@@ -40,6 +41,7 @@
 
 #include <plat/cpu.h>
 #include <plat/devs.h>
+#include <plat/gpio-cfg.h>
 #include <plat/samsung-time.h>
 
 #include "bast.h"
@@ -223,21 +225,42 @@ static struct platform_device vr1000_dm9k1 = {
 
 /* LEDS */
 
+static struct gpiod_lookup_table vr1000_led1_gpio_table = {
+	.dev_id = "s3c24xx_led.1",
+	.table = {
+		GPIO_LOOKUP("GPB", 0, NULL, GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
+static struct gpiod_lookup_table vr1000_led2_gpio_table = {
+	.dev_id = "s3c24xx_led.2",
+	.table = {
+		GPIO_LOOKUP("GPB", 1, NULL, GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
+static struct gpiod_lookup_table vr1000_led3_gpio_table = {
+	.dev_id = "s3c24xx_led.3",
+	.table = {
+		GPIO_LOOKUP("GPB", 2, NULL, GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
 static struct s3c24xx_led_platdata vr1000_led1_pdata = {
 	.name		= "led1",
-	.gpio		= S3C2410_GPB(0),
 	.def_trigger	= "",
 };
 
 static struct s3c24xx_led_platdata vr1000_led2_pdata = {
 	.name		= "led2",
-	.gpio		= S3C2410_GPB(1),
 	.def_trigger	= "",
 };
 
 static struct s3c24xx_led_platdata vr1000_led3_pdata = {
 	.name		= "led3",
-	.gpio		= S3C2410_GPB(2),
 	.def_trigger	= "",
 };
 
@@ -317,6 +340,15 @@ static void __init vr1000_init_time(void)
 static void __init vr1000_init(void)
 {
 	s3c_i2c0_set_platdata(NULL);
+
+	/* Disable pull-up on LED lines and register GPIO lookups */
+	s3c_gpio_setpull(S3C2410_GPB(0), S3C_GPIO_PULL_NONE);
+	s3c_gpio_setpull(S3C2410_GPB(1), S3C_GPIO_PULL_NONE);
+	s3c_gpio_setpull(S3C2410_GPB(2), S3C_GPIO_PULL_NONE);
+	gpiod_add_lookup_table(&vr1000_led1_gpio_table);
+	gpiod_add_lookup_table(&vr1000_led2_gpio_table);
+	gpiod_add_lookup_table(&vr1000_led3_gpio_table);
+
 	platform_add_devices(vr1000_devices, ARRAY_SIZE(vr1000_devices));
 
 	i2c_register_board_info(0, vr1000_i2c_devs,
diff --git a/drivers/leds/leds-s3c24xx.c b/drivers/leds/leds-s3c24xx.c
index f8b8d6e313ee..3734173596bf 100644
--- a/drivers/leds/leds-s3c24xx.c
+++ b/drivers/leds/leds-s3c24xx.c
@@ -11,19 +11,19 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/leds.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/platform_data/leds-s3c24xx.h>
 
 #include <mach/regs-gpio.h>
-#include <plat/gpio-cfg.h>
 
 /* our context */
 
 struct s3c24xx_gpio_led {
 	struct led_classdev		 cdev;
 	struct s3c24xx_led_platdata	*pdata;
+	struct gpio_desc		*gpiod;
 };
 
 static inline struct s3c24xx_gpio_led *to_gpio(struct led_classdev *led_cdev)
@@ -35,20 +35,9 @@ static void s3c24xx_led_set(struct led_classdev *led_cdev,
 			    enum led_brightness value)
 {
 	struct s3c24xx_gpio_led *led = to_gpio(led_cdev);
-	struct s3c24xx_led_platdata *pd = led->pdata;
-	int state = (value ? 1 : 0) ^ (pd->flags & S3C24XX_LEDF_ACTLOW);
+	int state = (value ? 1 : 0);
 
-	/* there will be a short delay between setting the output and
-	 * going from output to input when using tristate. */
-
-	gpio_set_value(pd->gpio, state);
-
-	if (pd->flags & S3C24XX_LEDF_TRISTATE) {
-		if (value)
-			gpio_direction_output(pd->gpio, state);
-		else
-			gpio_direction_input(pd->gpio);
-	}
+	gpiod_set_value(led->gpiod, state);
 }
 
 static int s3c24xx_led_probe(struct platform_device *dev)
@@ -69,22 +58,12 @@ static int s3c24xx_led_probe(struct platform_device *dev)
 
 	led->pdata = pdata;
 
-	ret = devm_gpio_request(&dev->dev, pdata->gpio, "S3C24XX_LED");
-	if (ret < 0)
-		return ret;
-
-	/* no point in having a pull-up if we are always driving */
-
-	s3c_gpio_setpull(pdata->gpio, S3C_GPIO_PULL_NONE);
-
-	if (pdata->flags & S3C24XX_LEDF_TRISTATE)
-		gpio_direction_input(pdata->gpio);
-	else
-		gpio_direction_output(pdata->gpio,
-			pdata->flags & S3C24XX_LEDF_ACTLOW ? 1 : 0);
+	/* Default to off */
+	led->gpiod = devm_gpiod_get(&dev->dev, NULL, GPIOD_OUT_LOW);
+	if (IS_ERR(led->gpiod))
+		return PTR_ERR(led->gpiod);
 
 	/* register our new led device */
-
 	ret = devm_led_classdev_register(&dev->dev, &led->cdev);
 	if (ret < 0)
 		dev_err(&dev->dev, "led_classdev_register failed\n");
diff --git a/include/linux/platform_data/leds-s3c24xx.h b/include/linux/platform_data/leds-s3c24xx.h
index 5bbae85811e2..64f8d14876e0 100644
--- a/include/linux/platform_data/leds-s3c24xx.h
+++ b/include/linux/platform_data/leds-s3c24xx.h
@@ -10,13 +10,7 @@
 #ifndef __LEDS_S3C24XX_H
 #define __LEDS_S3C24XX_H
 
-#define S3C24XX_LEDF_ACTLOW	(1<<0)		/* LED is on when GPIO low */
-#define S3C24XX_LEDF_TRISTATE	(1<<1)		/* tristate to turn off */
-
 struct s3c24xx_led_platdata {
-	unsigned int		 gpio;
-	unsigned int		 flags;
-
 	char			*name;
 	char			*def_trigger;
 };
-- 
2.25.4


             reply index

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-27  0:10 Linus Walleij [this message]
2020-06-29 18:40 ` Krzysztof Kozlowski
2020-06-29 21:49 ` Jacek Anaszewski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200627001015.427376-1-linus.walleij@linaro.org \
    --to=linus.walleij@linaro.org \
    --cc=ben-linux@fluff.org \
    --cc=dmurphy@ti.com \
    --cc=jacek.anaszewski@gmail.com \
    --cc=krzk@kernel.org \
    --cc=linux-leds@vger.kernel.org \
    --cc=pavel@ucw.cz \
    --cc=sylvester.nawrocki@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-LEDs Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-leds/0 linux-leds/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-leds linux-leds/ https://lore.kernel.org/linux-leds \
		linux-leds@vger.kernel.org
	public-inbox-index linux-leds

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-leds


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git