From: "Ondřej Jirman" <megous@megous.com>
To: Pavel Machek <pavel@ucw.cz>
Cc: linux-kernel@vger.kernel.org,
Jacek Anaszewski <jacek.anaszewski@gmail.com>,
Dan Murphy <dmurphy@ti.com>,
"open list:LED SUBSYSTEM" <linux-leds@vger.kernel.org>,
marek.behun@nic.cz
Subject: Re: [PATCH RFC] leds: Add support for per-LED device triggers
Date: Mon, 13 Jul 2020 00:12:25 +0200 [thread overview]
Message-ID: <20200712221225.jkfof4edsveoidhm@core.my.home> (raw)
In-Reply-To: <20200712191111.GA20592@amd>
Hello Pavel,
On Sun, Jul 12, 2020 at 09:11:11PM +0200, Pavel Machek wrote:
> Hi!
>
> > > > > > Some LED controllers may come with an internal HW triggering mechanism
> > > > > > for the LED and an ability to switch between user control of the LED,
> > > > > > or the internal control. One such example is AXP20X PMIC, that allows
> > > > > > wither for user control of the LED, or for internal control based on
> > > > > > the state of the battery charger.
> > > > > >
> > > > > > Add support for registering per-LED device trigger.
> > > > > >
> > > > > > Names of private triggers need to be globally unique, but may clash
> > > > > > with other private triggers. This is enforced during trigger
> > > > > > registration. Developers can register private triggers just like
> > > > > > the normal triggers, by setting private_led to a classdev
> > > > > > of the LED the trigger is associated with.
> > > > >
> > > > > What about this? Should address Marek's concerns about resource use...
> > > >
> > > > What concerns? Marek's concerns seem to be about case where we register
> > > > a trigger for (each led * self-working configuration) which I admit
> > > > can be quite a lot of triggers if there are many functions. But that's
> > > > not my proposal.
> > > >
> > > > My proposal is to only register on trigger per LED at most. So on my
> > > > system that's 1 extra trigger and on Marek's system that'd be 48 new
> > > > triggers. Neither seems like a meaningful problem from resource
> > > > use perspective.
> > >
> > > So.. 48 triggers on Marek's systems means I'll not apply your patch.
> > >
> > > Please take a look at my version, it is as simple and avoids that
> > > problem.
> >
> > I would, but I don't see your version linked or mentioned in this
> > thread.
>
> Ah! Sorry about that. Here it is. (I verified it compiles in the
> meantime).
>
> Best regards,
> Pavel
>
> diff --git a/drivers/leds/led-triggers.c b/drivers/leds/led-triggers.c
> index 79e30d2cb7a5..e8333675959c 100644
> --- a/drivers/leds/led-triggers.c
> +++ b/drivers/leds/led-triggers.c
> @@ -27,6 +27,12 @@ LIST_HEAD(trigger_list);
>
> /* Used by LED Class */
>
> +static inline bool
> +trigger_relevant(struct led_classdev *led_cdev, struct led_trigger *trig)
> +{
> + return !trig->trigger_type || trig->trigger_type == led_cdev->trigger_type;
> +}
> +
> ssize_t led_trigger_write(struct file *filp, struct kobject *kobj,
> struct bin_attribute *bin_attr, char *buf,
> loff_t pos, size_t count)
> @@ -50,7 +56,8 @@ ssize_t led_trigger_write(struct file *filp, struct kobject *kobj,
>
> down_read(&triggers_list_lock);
> list_for_each_entry(trig, &trigger_list, next_trig) {
> - if (sysfs_streq(buf, trig->name)) {
> + if (sysfs_streq(buf, trig->name) &&
> + trigger_relevant(led_cdev, trig)) {
> down_write(&led_cdev->trigger_lock);
> led_trigger_set(led_cdev, trig);
> up_write(&led_cdev->trigger_lock);
> @@ -96,6 +103,9 @@ static int led_trigger_format(char *buf, size_t size,
> bool hit = led_cdev->trigger &&
> !strcmp(led_cdev->trigger->name, trig->name);
>
> + if (!trigger_relevant(led_cdev, trig))
> + continue;
> +
> len += led_trigger_snprintf(buf + len, size - len,
> " %s%s%s", hit ? "[" : "",
> trig->name, hit ? "]" : "");
> @@ -243,7 +253,8 @@ void led_trigger_set_default(struct led_classdev *led_cdev)
> down_read(&triggers_list_lock);
> down_write(&led_cdev->trigger_lock);
> list_for_each_entry(trig, &trigger_list, next_trig) {
> - if (!strcmp(led_cdev->default_trigger, trig->name)) {
> + if (!strcmp(led_cdev->default_trigger, trig->name) &&
> + trigger_relevant(led_cdev, trig)) {
> led_cdev->flags |= LED_INIT_DEFAULT_TRIGGER;
> led_trigger_set(led_cdev, trig);
> break;
> @@ -280,7 +291,8 @@ int led_trigger_register(struct led_trigger *trig)
> down_write(&triggers_list_lock);
> /* Make sure the trigger's name isn't already in use */
> list_for_each_entry(_trig, &trigger_list, next_trig) {
> - if (!strcmp(_trig->name, trig->name)) {
> + if (!strcmp(_trig->name, trig->name) &&
> + (!_trig->private_led || _trig->private_led == trig->private_led)) {
> up_write(&triggers_list_lock);
> return -EEXIST;
> }
This would not compile, probably some stale code.
> diff --git a/include/linux/leds.h b/include/linux/leds.h
> index 2451962d1ec5..cba52714558f 100644
> --- a/include/linux/leds.h
> +++ b/include/linux/leds.h
> @@ -57,6 +57,10 @@ struct led_init_data {
> bool devname_mandatory;
> };
>
> +struct led_hw_trigger_type {
> + int dummy;
> +}
> +
> struct led_classdev {
> const char *name;
> enum led_brightness brightness;
> @@ -150,6 +154,8 @@ struct led_classdev {
>
> /* Ensures consistent access to the LED Flash Class device */
> struct mutex led_access;
> +
> + struct led_hw_trigger_type *trigger_type;
> };
>
> /**
> @@ -345,6 +351,9 @@ struct led_trigger {
> int (*activate)(struct led_classdev *led_cdev);
> void (*deactivate)(struct led_classdev *led_cdev);
>
> + /* LED-private triggers have this set. */
> + struct led_hw_trigger_type *trigger_type;
> +
> /* LEDs under control by this trigger (for simple triggers) */
> rwlock_t leddev_list_lock;
> struct list_head led_cdevs;
I like this proposal. I'll try to use it in my code. Thank you!
regards,
o.
> --
> (english) http://www.livejournal.com/~pavelmachek
> (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
next prev parent reply other threads:[~2020-07-12 22:12 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-02 14:47 [PATCH RFC] leds: Add support for per-LED device triggers Ondrej Jirman
2020-07-02 14:51 ` Ondřej Jirman
2020-07-03 10:06 ` Marek Behún
2020-07-03 13:08 ` Ondřej Jirman
2020-07-08 14:55 ` Marek Behún
2020-07-04 12:59 ` Pavel Machek
2020-07-08 14:56 ` Marek Behún
2020-07-04 12:04 ` Pavel Machek
2020-07-04 12:17 ` Ondřej Jirman
2020-07-04 20:07 ` Pavel Machek
2020-07-11 10:04 ` Pavel Machek
2020-07-11 21:01 ` Ondřej Jirman
2020-07-12 7:25 ` Pavel Machek
2020-07-12 13:49 ` Ondřej Jirman
2020-07-12 19:11 ` Pavel Machek
2020-07-12 21:10 ` Marek Behun
2020-07-12 22:12 ` Ondřej Jirman [this message]
2020-07-12 22:38 ` Ondřej Jirman
2020-07-12 23:15 ` Marek Behun
2020-07-12 23:18 ` Marek Behun
2020-07-13 7:12 ` Pavel Machek
2020-07-12 23:20 ` Ondřej Jirman
2020-07-13 1:56 ` Ondřej Jirman
2020-07-15 17:07 ` Marek Behún
2020-07-15 17:55 ` Marek Behún
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200712221225.jkfof4edsveoidhm@core.my.home \
--to=megous@megous.com \
--cc=dmurphy@ti.com \
--cc=jacek.anaszewski@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-leds@vger.kernel.org \
--cc=marek.behun@nic.cz \
--cc=pavel@ucw.cz \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).