[PATCH RFC 4/6] leds: leds-qti-tri-led: Add LED driver for QTI TRI_LED module

[Martin Botka <martin.botka1@gmail.com>]

From: Fenglin Wu <fenglinw@codeaurora.org>

QTI TRI_LED module has 3 current sinks at max for LED driver and
each is controlled by a PWM channel used for LED dimming or blinking.
Add the driver to support it.

Signed-off-by: Fenglin Wu <fenglinw@codeaurora.org>
[martin.botka1@@gmail.com: Fast-forward the driver from kernel 4.14 to 5.8]
Signed-off-by: Martin Botka <martin.botka1@gmail.com>
---
 drivers/leds/Kconfig            |   9 +
 drivers/leds/Makefile           |   1 +
 drivers/leds/leds-qti-tri-led.c | 640 ++++++++++++++++++++++++++++++++
 3 files changed, 650 insertions(+)
 create mode 100644 drivers/leds/leds-qti-tri-led.c

diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index ed943140e1fd..37beff922945 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -768,6 +768,15 @@ config LEDS_POWERNV
 	  To compile this driver as a module, choose 'm' here: the module
 	  will be called leds-powernv.
 
+config LEDS_QTI_TRI_LED
+	tristate "LED support for Qualcomm Technologies, Inc. TRI_LED"
+	depends on LEDS_CLASS && MFD_SPMI_PMIC && PWM && OF
+	help
+	  This driver supports the TRI_LED module found in Qualcomm
+	  Technologies, Inc. PMIC chips. TRI_LED supports 3 LED drivers
+	  at max and each is controlled by a PWM channel used for dimming
+	  or blinking.
+
 config LEDS_SYSCON
 	bool "LED support for LEDs on system controllers"
 	depends on LEDS_CLASS=y
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index d6b8a792c936..16a5be936178 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -20,6 +20,7 @@ obj-$(CONFIG_LEDS_BCM6328)		+= leds-bcm6328.o
 obj-$(CONFIG_LEDS_BCM6358)		+= leds-bcm6358.o
 obj-$(CONFIG_LEDS_BD2802)		+= leds-bd2802.o
 obj-$(CONFIG_LEDS_BLINKM)		+= leds-blinkm.o
+obj-$(CONFIG_LEDS_QTI_TRI_LED)		+= leds-qti-tri-led.o
 obj-$(CONFIG_LEDS_CLEVO_MAIL)		+= leds-clevo-mail.o
 obj-$(CONFIG_LEDS_COBALT_QUBE)		+= leds-cobalt-qube.o
 obj-$(CONFIG_LEDS_COBALT_RAQ)		+= leds-cobalt-raq.o
diff --git a/drivers/leds/leds-qti-tri-led.c b/drivers/leds/leds-qti-tri-led.c
new file mode 100644
index 000000000000..ea5069e22662
--- /dev/null
+++ b/drivers/leds/leds-qti-tri-led.c
@@ -0,0 +1,640 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/bitops.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/leds.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/nvmem-consumer.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/regmap.h>
+#include <linux/types.h>
+
+#define TRILED_REG_TYPE 0x04
+#define TRILED_REG_SUBTYPE 0x05
+#define TRILED_REG_EN_CTL 0x46
+
+/* TRILED_REG_EN_CTL */
+#define TRILED_EN_CTL_MASK GENMASK(7, 5)
+#define TRILED_EN_CTL_MAX_BIT 7
+
+#define TRILED_TYPE 0x19
+#define TRILED_SUBTYPE_LED3H0L12 0x02
+#define TRILED_SUBTYPE_LED2H0L12 0x03
+#define TRILED_SUBTYPE_LED1H2L12 0x04
+
+#define TRILED_NUM_MAX 3
+
+#define PWM_PERIOD_DEFAULT_NS 1000000
+
+struct pwm_setting {
+	u64 pre_period_ns;
+	u64 period_ns;
+	u64 duty_ns;
+};
+
+struct led_setting {
+	u64 on_ms;
+	u64 off_ms;
+	enum led_brightness brightness;
+	bool blink;
+	bool breath;
+};
+
+struct qpnp_led_dev {
+	struct led_classdev cdev;
+	struct pwm_device *pwm_dev;
+	struct pwm_setting pwm_setting;
+	struct led_setting led_setting;
+	struct qpnp_tri_led_chip *chip;
+	struct mutex lock;
+	const char *label;
+	const char *default_trigger;
+	u8 id;
+	bool blinking;
+	bool breathing;
+};
+
+struct qpnp_tri_led_chip {
+	struct device *dev;
+	struct regmap *regmap;
+	struct qpnp_led_dev *leds;
+	struct nvmem_device *pbs_nvmem;
+	struct mutex bus_lock;
+	int num_leds;
+	u16 reg_base;
+	u8 subtype;
+	u8 bitmap;
+};
+
+static int qpnp_tri_led_read(struct qpnp_tri_led_chip *chip, u16 addr, u8 *val)
+{
+	int rc;
+	unsigned int tmp;
+
+	mutex_lock(&chip->bus_lock);
+	rc = regmap_read(chip->regmap, chip->reg_base + addr, &tmp);
+	if (rc < 0)
+		dev_err(chip->dev, "Read addr 0x%x failed, rc=%d\n", addr, rc);
+	else
+		*val = (u8)tmp;
+	mutex_unlock(&chip->bus_lock);
+
+	return rc;
+}
+
+static int qpnp_tri_led_masked_write(struct qpnp_tri_led_chip *chip, u16 addr,
+				     u8 mask, u8 val)
+{
+	int rc;
+
+	mutex_lock(&chip->bus_lock);
+	rc = regmap_update_bits(chip->regmap, chip->reg_base + addr, mask, val);
+	if (rc < 0)
+		dev_err(chip->dev,
+			"Update addr 0x%x to val 0x%x with mask 0x%x failed, rc=%d\n",
+			addr, val, mask, rc);
+	mutex_unlock(&chip->bus_lock);
+
+	return rc;
+}
+
+static int __tri_led_config_pwm(struct qpnp_led_dev *led,
+				struct pwm_setting *pwm)
+{
+	struct pwm_state pstate;
+	int rc;
+
+	pwm_get_state(led->pwm_dev, &pstate);
+	pstate.enabled = !!(pwm->duty_ns != 0);
+	pstate.period = pwm->period_ns;
+	pstate.duty_cycle = pwm->duty_ns;
+	rc = pwm_apply_state(led->pwm_dev, &pstate);
+
+	if (rc < 0)
+		dev_err(led->chip->dev,
+			"Apply PWM state for %s led failed, rc=%d\n",
+			led->cdev.name, rc);
+
+	return rc;
+}
+
+#define PBS_ENABLE 1
+#define PBS_DISABLE 2
+#define PBS_ARG 0x42
+#define PBS_TRIG_CLR 0xE6
+#define PBS_TRIG_SET 0xE5
+static int __tri_led_set(struct qpnp_led_dev *led)
+{
+	int rc = 0;
+	u8 val = 0, mask = 0, pbs_val;
+	u8 prev_bitmap;
+
+	rc = __tri_led_config_pwm(led, &led->pwm_setting);
+	if (rc < 0) {
+		dev_err(led->chip->dev,
+			"Configure PWM for %s led failed, rc=%d\n",
+			led->cdev.name, rc);
+		return rc;
+	}
+
+	mask |= 1 << (TRILED_EN_CTL_MAX_BIT - led->id);
+
+	if (led->pwm_setting.duty_ns == 0)
+		val = 0;
+	else
+		val = mask;
+
+	if (led->chip->subtype == TRILED_SUBTYPE_LED2H0L12 &&
+	    led->chip->pbs_nvmem) {
+		/*
+		 * Control BOB_CONFIG_EXT_CTRL2_FORCE_EN for HR_LED through
+		 * PBS trigger. PBS trigger for enable happens if any one of
+		 * LEDs are turned on. PBS trigger for disable happens only
+		 * if both LEDs are turned off.
+		 */
+
+		prev_bitmap = led->chip->bitmap;
+		if (val)
+			led->chip->bitmap |= (1 << led->id);
+		else
+			led->chip->bitmap &= ~(1 << led->id);
+
+		if (!(led->chip->bitmap & prev_bitmap)) {
+			pbs_val = led->chip->bitmap ? PBS_ENABLE : PBS_DISABLE;
+			rc = nvmem_device_write(led->chip->pbs_nvmem, PBS_ARG,
+						1, &pbs_val);
+			if (rc < 0) {
+				dev_err(led->chip->dev,
+					"Couldn't set PBS_ARG, rc=%d\n", rc);
+				return rc;
+			}
+
+			pbs_val = 1;
+			rc = nvmem_device_write(led->chip->pbs_nvmem,
+						PBS_TRIG_CLR, 1, &pbs_val);
+			if (rc < 0) {
+				dev_err(led->chip->dev,
+					"Couldn't set PBS_TRIG_CLR, rc=%d\n",
+					rc);
+				return rc;
+			}
+
+			pbs_val = 1;
+			rc = nvmem_device_write(led->chip->pbs_nvmem,
+						PBS_TRIG_SET, 1, &pbs_val);
+			if (rc < 0) {
+				dev_err(led->chip->dev,
+					"Couldn't set PBS_TRIG_SET, rc=%d\n",
+					rc);
+				return rc;
+			}
+		}
+	}
+
+	rc = qpnp_tri_led_masked_write(led->chip, TRILED_REG_EN_CTL, mask, val);
+	if (rc < 0)
+		dev_err(led->chip->dev, "Update addr 0x%x failed, rc=%d\n",
+			TRILED_REG_EN_CTL, rc);
+
+	return rc;
+}
+
+static int qpnp_tri_led_set(struct qpnp_led_dev *led)
+{
+	u64 on_ms, off_ms, period_ns, duty_ns;
+	enum led_brightness brightness = led->led_setting.brightness;
+	int rc = 0;
+
+	if (led->led_setting.blink) {
+		on_ms = led->led_setting.on_ms;
+		off_ms = led->led_setting.off_ms;
+
+		duty_ns = on_ms * NSEC_PER_MSEC;
+		period_ns = (on_ms + off_ms) * NSEC_PER_MSEC;
+
+		if (period_ns < duty_ns && duty_ns != 0)
+			period_ns = duty_ns + 1;
+	} else {
+		/* Use initial period if no blinking is required */
+		period_ns = led->pwm_setting.pre_period_ns;
+
+		if (brightness == LED_OFF)
+			duty_ns = 0;
+
+		duty_ns = period_ns * brightness;
+		do_div(duty_ns, LED_FULL);
+
+		if (period_ns < duty_ns && duty_ns != 0)
+			period_ns = duty_ns + 1;
+	}
+	dev_dbg(led->chip->dev,
+		"PWM settings for %s led: period = %lluns, duty = %lluns\n",
+		led->cdev.name, period_ns, duty_ns);
+
+	led->pwm_setting.duty_ns = duty_ns;
+	led->pwm_setting.period_ns = period_ns;
+
+	rc = __tri_led_set(led);
+	if (rc < 0) {
+		dev_err(led->chip->dev, "__tri_led_set %s failed, rc=%d\n",
+			led->cdev.name, rc);
+		return rc;
+	}
+
+	if (led->led_setting.blink) {
+		led->cdev.brightness = LED_FULL;
+		led->blinking = true;
+		led->breathing = false;
+	} else if (led->led_setting.breath) {
+		led->cdev.brightness = LED_FULL;
+		led->blinking = false;
+		led->breathing = true;
+	} else {
+		led->cdev.brightness = led->led_setting.brightness;
+		led->blinking = false;
+		led->breathing = false;
+	}
+
+	return rc;
+}
+
+static int qpnp_tri_led_set_brightness(struct led_classdev *led_cdev,
+				       enum led_brightness brightness)
+{
+	struct qpnp_led_dev *led =
+		container_of(led_cdev, struct qpnp_led_dev, cdev);
+	int rc = 0;
+
+	mutex_lock(&led->lock);
+	if (brightness > LED_FULL)
+		brightness = LED_FULL;
+
+	if (brightness == led->led_setting.brightness && !led->blinking &&
+	    !led->breathing) {
+		mutex_unlock(&led->lock);
+		return 0;
+	}
+
+	led->led_setting.brightness = brightness;
+	if (!!brightness)
+		led->led_setting.off_ms = 0;
+	else
+		led->led_setting.on_ms = 0;
+	led->led_setting.blink = false;
+	led->led_setting.breath = false;
+
+	rc = qpnp_tri_led_set(led);
+	if (rc)
+		dev_err(led->chip->dev, "Set led failed for %s, rc=%d\n",
+			led->label, rc);
+
+	mutex_unlock(&led->lock);
+
+	return rc;
+}
+
+static enum led_brightness
+qpnp_tri_led_get_brightness(struct led_classdev *led_cdev)
+{
+	return led_cdev->brightness;
+}
+
+static int qpnp_tri_led_set_blink(struct led_classdev *led_cdev,
+				  unsigned long *on_ms, unsigned long *off_ms)
+{
+	struct qpnp_led_dev *led =
+		container_of(led_cdev, struct qpnp_led_dev, cdev);
+	int rc = 0;
+
+	mutex_lock(&led->lock);
+	if (led->blinking && *on_ms == led->led_setting.on_ms &&
+	    *off_ms == led->led_setting.off_ms) {
+		dev_dbg(led_cdev->dev,
+			"Ignore, on/off setting is not changed: on %lums, off %lums\n",
+			*on_ms, *off_ms);
+		mutex_unlock(&led->lock);
+		return 0;
+	}
+
+	if (*on_ms == 0) {
+		led->led_setting.blink = false;
+		led->led_setting.breath = false;
+		led->led_setting.brightness = LED_OFF;
+	} else if (*off_ms == 0) {
+		led->led_setting.blink = false;
+		led->led_setting.breath = false;
+		led->led_setting.brightness = led->cdev.brightness;
+	} else {
+		led->led_setting.on_ms = *on_ms;
+		led->led_setting.off_ms = *off_ms;
+		led->led_setting.blink = true;
+		led->led_setting.breath = false;
+	}
+
+	rc = qpnp_tri_led_set(led);
+	if (rc)
+		dev_err(led->chip->dev, "Set led failed for %s, rc=%d\n",
+			led->label, rc);
+
+	mutex_unlock(&led->lock);
+	return rc;
+}
+
+static ssize_t breath_show(struct device *dev, struct device_attribute *attr,
+			   char *buf)
+{
+	struct led_classdev *led_cdev = dev_get_drvdata(dev);
+	struct qpnp_led_dev *led =
+		container_of(led_cdev, struct qpnp_led_dev, cdev);
+
+	return snprintf(buf, PAGE_SIZE, "%d\n", led->led_setting.breath);
+}
+
+static ssize_t breath_store(struct device *dev, struct device_attribute *attr,
+			    const char *buf, size_t count)
+{
+	int rc;
+	bool breath;
+	struct led_classdev *led_cdev = dev_get_drvdata(dev);
+	struct qpnp_led_dev *led =
+		container_of(led_cdev, struct qpnp_led_dev, cdev);
+
+	rc = kstrtobool(buf, &breath);
+	if (rc < 0)
+		return rc;
+
+	cancel_work_sync(&led_cdev->set_brightness_work);
+
+	mutex_lock(&led->lock);
+	if (led->breathing == breath)
+		goto unlock;
+
+	led->led_setting.blink = false;
+	led->led_setting.breath = breath;
+	led->led_setting.brightness = breath ? LED_FULL : LED_OFF;
+	rc = qpnp_tri_led_set(led);
+	if (rc < 0)
+		dev_err(led->chip->dev, "Set led failed for %s, rc=%d\n",
+			led->label, rc);
+
+unlock:
+	mutex_unlock(&led->lock);
+	return (rc < 0) ? rc : count;
+}
+
+static DEVICE_ATTR(breath, 0644, breath_show, breath_store);
+static const struct attribute *breath_attrs[] = { &dev_attr_breath.attr, NULL };
+
+static int qpnp_tri_led_register(struct qpnp_tri_led_chip *chip)
+{
+	struct qpnp_led_dev *led;
+	int rc, i, j;
+
+	for (i = 0; i < chip->num_leds; i++) {
+		led = &chip->leds[i];
+		mutex_init(&led->lock);
+		led->cdev.name = led->label;
+		led->cdev.max_brightness = LED_FULL;
+		led->cdev.brightness_set_blocking = qpnp_tri_led_set_brightness;
+		led->cdev.brightness_get = qpnp_tri_led_get_brightness;
+		led->cdev.blink_set = qpnp_tri_led_set_blink;
+		led->cdev.default_trigger = led->default_trigger;
+		led->cdev.brightness = LED_OFF;
+
+		rc = devm_led_classdev_register(chip->dev, &led->cdev);
+		if (rc < 0) {
+			dev_err(chip->dev,
+				"%s led class device registering failed, rc=%d\n",
+				led->label, rc);
+			goto err_out;
+		}
+
+		/* Make sure to initialize the LEDs to known values */
+		rc = qpnp_tri_led_set(led);
+		if (rc)
+			dev_warn(chip->dev,
+				 "Cannot initialize %s LED to OFF value: %d\n",
+				 led->label, rc);
+	}
+
+	return 0;
+
+err_out:
+	for (j = 0; j <= i; j++) {
+		if (j < i)
+			sysfs_remove_files(&chip->leds[j].cdev.dev->kobj,
+					   breath_attrs);
+		mutex_destroy(&chip->leds[j].lock);
+	}
+	return rc;
+}
+
+static int qpnp_tri_led_hw_init(struct qpnp_tri_led_chip *chip)
+{
+	int rc = 0;
+	u8 val;
+
+	rc = qpnp_tri_led_read(chip, TRILED_REG_TYPE, &val);
+	if (rc < 0) {
+		dev_err(chip->dev, "Read REG_TYPE failed, rc=%d\n", rc);
+		return rc;
+	}
+
+	if (val != TRILED_TYPE) {
+		dev_err(chip->dev, "invalid subtype(%d)\n", val);
+		return -ENODEV;
+	}
+
+	rc = qpnp_tri_led_read(chip, TRILED_REG_SUBTYPE, &val);
+	if (rc < 0) {
+		dev_err(chip->dev, "Read REG_SUBTYPE failed, rc=%d\n", rc);
+		return rc;
+	}
+
+	chip->subtype = val;
+
+	return 0;
+}
+
+static int qpnp_tri_led_parse_dt(struct qpnp_tri_led_chip *chip)
+{
+	struct device_node *node = chip->dev->of_node, *child_node;
+	struct qpnp_led_dev *led;
+	struct pwm_args pargs;
+	const __be32 *addr;
+	int rc = 0, id, i = 0;
+
+	addr = of_get_address(chip->dev->of_node, 0, NULL, NULL);
+	if (!addr) {
+		dev_err(chip->dev, "Getting address failed\n");
+		return -EINVAL;
+	}
+	chip->reg_base = be32_to_cpu(addr[0]);
+
+	chip->num_leds = of_get_available_child_count(node);
+	if (chip->num_leds == 0) {
+		dev_err(chip->dev, "No led child node defined\n");
+		return -ENODEV;
+	}
+
+	if (chip->num_leds > TRILED_NUM_MAX) {
+		dev_err(chip->dev, "can't support %d leds(max %d)\n",
+			chip->num_leds, TRILED_NUM_MAX);
+		return -EINVAL;
+	}
+
+	if (of_find_property(chip->dev->of_node, "nvmem", NULL)) {
+		chip->pbs_nvmem = devm_nvmem_device_get(chip->dev, "pbs_sdam");
+		if (IS_ERR_OR_NULL(chip->pbs_nvmem)) {
+			rc = PTR_ERR(chip->pbs_nvmem);
+			if (rc != -EPROBE_DEFER) {
+				dev_err(chip->dev,
+					"Couldn't get nvmem device, rc=%d\n",
+					rc);
+				return -ENODEV;
+			}
+			chip->pbs_nvmem = NULL;
+			return rc;
+		}
+	}
+
+	chip->leds = devm_kcalloc(chip->dev, chip->num_leds,
+				  sizeof(struct qpnp_led_dev), GFP_KERNEL);
+	if (!chip->leds)
+		return -ENOMEM;
+
+	for_each_available_child_of_node (node, child_node) {
+		rc = of_property_read_u32(child_node, "led-sources", &id);
+		if (rc) {
+			dev_err(chip->dev, "Get led-sources failed, rc=%d\n",
+				rc);
+			return rc;
+		}
+
+		if (id >= TRILED_NUM_MAX) {
+			dev_err(chip->dev, "only support 0~%d current source\n",
+				TRILED_NUM_MAX - 1);
+			return -EINVAL;
+		}
+
+		led = &chip->leds[i++];
+		led->chip = chip;
+		led->id = id;
+		led->label = of_get_property(child_node, "label", NULL) ?:
+				     child_node->name;
+
+		led->pwm_dev = devm_of_pwm_get(chip->dev, child_node, NULL);
+		if (IS_ERR(led->pwm_dev)) {
+			rc = PTR_ERR(led->pwm_dev);
+			if (rc != -EPROBE_DEFER)
+				dev_err(chip->dev,
+					"Get pwm device for %s led failed, rc=%d\n",
+					led->label, rc);
+			return rc;
+		}
+
+		pwm_get_args(led->pwm_dev, &pargs);
+		if (pargs.period == 0)
+			led->pwm_setting.pre_period_ns = PWM_PERIOD_DEFAULT_NS;
+		else
+			led->pwm_setting.pre_period_ns = pargs.period;
+
+		led->default_trigger = of_get_property(
+			child_node, "linux,default-trigger", NULL);
+	}
+
+	return rc;
+}
+
+static int qpnp_tri_led_probe(struct platform_device *pdev)
+{
+	struct qpnp_tri_led_chip *chip;
+	int rc = 0;
+
+	chip = devm_kzalloc(&pdev->dev, sizeof(*chip), GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+
+	chip->dev = &pdev->dev;
+	chip->regmap = dev_get_regmap(chip->dev->parent, NULL);
+	if (!chip->regmap) {
+		dev_err(chip->dev, "Getting regmap failed\n");
+		return -EINVAL;
+	}
+
+	rc = qpnp_tri_led_parse_dt(chip);
+	if (rc < 0) {
+		dev_err(chip->dev,
+			"Devicetree properties parsing failed, rc=%d\n", rc);
+		return rc;
+	}
+
+	mutex_init(&chip->bus_lock);
+
+	rc = qpnp_tri_led_hw_init(chip);
+	if (rc) {
+		dev_err(chip->dev, "HW initialization failed, rc=%d\n", rc);
+		goto destroy;
+	}
+
+	dev_set_drvdata(chip->dev, chip);
+	rc = qpnp_tri_led_register(chip);
+	if (rc < 0) {
+		dev_err(chip->dev,
+			"Registering LED class devices failed, rc=%d\n", rc);
+		goto destroy;
+	}
+
+	dev_dbg(chip->dev, "Tri-led module with subtype 0x%x is detected\n",
+		chip->subtype);
+	return 0;
+destroy:
+	mutex_destroy(&chip->bus_lock);
+	dev_set_drvdata(chip->dev, NULL);
+
+	return rc;
+}
+
+static int qpnp_tri_led_remove(struct platform_device *pdev)
+{
+	int i;
+	struct qpnp_tri_led_chip *chip = dev_get_drvdata(&pdev->dev);
+
+	mutex_destroy(&chip->bus_lock);
+	for (i = 0; i < chip->num_leds; i++) {
+		sysfs_remove_files(&chip->leds[i].cdev.dev->kobj, breath_attrs);
+		mutex_destroy(&chip->leds[i].lock);
+	}
+	dev_set_drvdata(chip->dev, NULL);
+	return 0;
+}
+
+static const struct of_device_id qpnp_tri_led_of_match[] = {
+	{
+		.compatible = "qcom,tri-led",
+	},
+	{},
+};
+
+static struct platform_driver qpnp_tri_led_driver = {
+	.driver		= {
+		.name		= "qcom,tri-led",
+		.of_match_table	= qpnp_tri_led_of_match,
+	},
+	.probe		= qpnp_tri_led_probe,
+	.remove		= qpnp_tri_led_remove,
+};
+module_platform_driver(qpnp_tri_led_driver);
+
+MODULE_DESCRIPTION("QTI TRI_LED driver");
+MODULE_LICENSE("GPL v2");
-- 
2.27.0