[PATCH v7 2/3] leds: pwm: add support for default-state device property

* [PATCH v7 2/3] leds: pwm: add support for default-state device property
  2020-07-31 16:51 [PATCH v7 0/3] leds: pwm: add support for default-state device Denis Osterland-Heim
@ 2020-07-31 16:51 ` Denis Osterland-Heim
  2020-07-31 16:51 ` [PATCH v7 3/3] leds: pwm: add reference to common leds for default-state Denis Osterland-Heim
  2020-07-31 16:51 ` [PATCH v7 1/3] leds: move default_state read from fwnode to core Denis Osterland-Heim
  2 siblings, 0 replies; 5+ messages in thread
From: Denis Osterland-Heim @ 2020-07-31 16:51 UTC (permalink / raw)
  To: dmurphy, pavel, jacek.anaszewski
  Cc: linux-kernel, Denis Osterland-Heim, linux-leds, robh+dt, devicetree

This patch adds support for "default-state" devicetree property, which
allows to defer pwm init to first use of led.

This allows to configure the PWM early in bootloader to let the LED
blink until an application in Linux userspace sets something different.

Signed-off-by: Denis Osterland-Heim <Denis.Osterland@diehl.com>
Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
---
 drivers/leds/leds-pwm.c | 49 ++++++++++++++++++++++++++++++++++++-----
 1 file changed, 43 insertions(+), 6 deletions(-)

diff --git a/drivers/leds/leds-pwm.c b/drivers/leds/leds-pwm.c
index ef7b91bd2064..0c0470c90d5d 100644
--- a/drivers/leds/leds-pwm.c
+++ b/drivers/leds/leds-pwm.c
@@ -17,11 +17,13 @@
 #include <linux/err.h>
 #include <linux/pwm.h>
 #include <linux/slab.h>
+#include "leds.h"
 
 struct led_pwm {
 	const char	*name;
 	const char	*default_trigger;
 	u8		active_low;
+	u8		default_state;
 	unsigned int	max_brightness;
 };
 
@@ -88,7 +90,38 @@ static int led_pwm_add(struct device *dev, struct led_pwm_priv *priv,
 
 	led_data->cdev.brightness_set_blocking = led_pwm_set;
 
-	pwm_init_state(led_data->pwm, &led_data->pwmstate);
+	/* init PWM state */
+	switch (led->default_state) {
+	case LEDS_DEFSTATE_KEEP:
+		pwm_get_state(led_data->pwm, &led_data->pwmstate);
+		if (led_data->pwmstate.period)
+			break;
+		led->default_state = LEDS_DEFSTATE_OFF;
+		dev_warn(dev,
+			"failed to read period for %s, default to off",
+			led->name);
+		fallthrough;
+	default:
+		pwm_init_state(led_data->pwm, &led_data->pwmstate);
+		break;
+	}
+
+	/* set brightness */
+	switch (led->default_state) {
+	case LEDS_DEFSTATE_ON:
+		led_data->cdev.brightness = led->max_brightness;
+		break;
+	case LEDS_DEFSTATE_KEEP:
+		{
+		uint64_t brightness;
+
+		brightness = led->max_brightness;
+		brightness *= led_data->pwmstate.duty_cycle;
+		do_div(brightness, led_data->pwmstate.period);
+		led_data->cdev.brightness = brightness;
+		}
+		break;
+	}
 
 	ret = devm_led_classdev_register(dev, &led_data->cdev);
 	if (ret) {
@@ -97,11 +130,13 @@ static int led_pwm_add(struct device *dev, struct led_pwm_priv *priv,
 		return ret;
 	}
 
-	ret = led_pwm_set(&led_data->cdev, led_data->cdev.brightness);
-	if (ret) {
-		dev_err(dev, "failed to set led PWM value for %s: %d",
-			led->name, ret);
-		return ret;
+	if (led->default_state != LEDS_DEFSTATE_KEEP) {
+		ret = led_pwm_set(&led_data->cdev, led_data->cdev.brightness);
+		if (ret) {
+			dev_err(dev, "failed to set led PWM value for %s: %d",
+				led->name, ret);
+			return ret;
+		}
 	}
 
 	priv->num_leds++;
@@ -134,6 +169,8 @@ static int led_pwm_create_fwnode(struct device *dev, struct led_pwm_priv *priv)
 		fwnode_property_read_u32(fwnode, "max-brightness",
 					 &led.max_brightness);
 
+		led.default_state = led_init_default_state_get(fwnode);
+
 		ret = led_pwm_add(dev, priv, &led, fwnode);
 		if (ret) {
 			fwnode_handle_put(fwnode);
-- 
2.28.0



Diehl Connectivity Solutions GmbH
Geschäftsführung: Horst Leonberger
Sitz der Gesellschaft: Nürnberg - Registergericht: Amtsgericht
Nürnberg: HRB 32315
___________________________________________________________________________________________________

Der Inhalt der vorstehenden E-Mail ist nicht rechtlich bindend. Diese E-Mail enthaelt vertrauliche und/oder rechtlich geschuetzte Informationen.
Informieren Sie uns bitte, wenn Sie diese E-Mail faelschlicherweise erhalten haben. Bitte loeschen Sie in diesem Fall die Nachricht.
Jede unerlaubte Form der Reproduktion, Bekanntgabe, Aenderung, Verteilung und/oder Publikation dieser E-Mail ist strengstens untersagt.
- Informationen zum Datenschutz, insbesondere zu Ihren Rechten, erhalten Sie unter https://www.diehl.com/group/de/transparenz-und-informationspflichten/

The contents of the above mentioned e-mail is not legally binding. This e-mail contains confidential and/or legally protected information. Please inform us if you have received this e-mail by
mistake and delete it in such a case. Each unauthorized reproduction, disclosure, alteration, distribution and/or publication of this e-mail is strictly prohibited. 
- For general information on data protection and your respective rights please visit https://www.diehl.com/group/en/transparency-and-information-obligations/

^ permalink raw reply related	[flat|nested] 5+ messages in thread