Hi!

> Add nodes for the green and yellow LEDs that are connected to the
> ethernet PHY chip on Turris MOX A.
> 
> Signed-off-by: Marek Behún <marek.behun@nic.cz>
> ---
>  .../dts/marvell/armada-3720-turris-mox.dts    | 23 +++++++++++++++++++
>  1 file changed, 23 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
> index f3a678e0fd99b..6da03b6c69c0a 100644
> --- a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
> +++ b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
> @@ -9,6 +9,7 @@
>  #include <dt-bindings/bus/moxtet.h>
>  #include <dt-bindings/gpio/gpio.h>
>  #include <dt-bindings/input/input.h>
> +#include <dt-bindings/leds/common.h>
>  #include "armada-372x.dtsi"
>  
>  / {
> @@ -273,6 +274,28 @@ &mdio {
>  
>  	phy1: ethernet-phy@1 {
>  		reg = <1>;
> +
> +		leds {
> +			compatible = "linux,hw-controlled-leds";

I don't believe this is suitable compatible.

Best regards,
									Pavel
-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html