linux-leds.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH] dt-bindings: Clean-up undocumented compatible strings
@ 2021-03-16 19:49 Rob Herring
  2021-03-16 20:52 ` Mark Brown
                   ` (10 more replies)
  0 siblings, 11 replies; 12+ messages in thread
From: Rob Herring @ 2021-03-16 19:49 UTC (permalink / raw)
  To: devicetree
  Cc: linux-kernel, Stephen Boyd, Maxime Ripard, Thierry Reding,
	Sam Ravnborg, Vinod Koul, Alexandre Belloni, Jonathan Cameron,
	Pavel Machek, Kishon Vijay Abraham I, Sebastian Reichel,
	Mark Brown, Greg Kroah-Hartman, linux-clk, dmaengine, linux-i3c,
	linux-iio, linux-leds, linux-pm, linux-serial, linux-spi

Adding checks for undocumented compatible strings reveals a bunch of
warnings in the DT binding examples. Fix the cases which are typos, just
a mismatch between the schema and the example, or aren't documented at all.
In a couple of cases, fixing the compatible revealed some schema errors
which are fixed.

There's a bunch of others remaining after this which have bindings, but
those aren't converted to schema yet.

Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-clk@vger.kernel.org
Cc: dmaengine@vger.kernel.org
Cc: linux-i3c@lists.infradead.org
Cc: linux-iio@vger.kernel.org
Cc: linux-leds@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Cc: linux-serial@vger.kernel.org
Cc: linux-spi@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
---
 .../clock/allwinner,sun4i-a10-pll1-clk.yaml   |  2 +-
 .../bindings/clock/milbeaut-clock.yaml        | 12 +++++----
 .../bindings/display/brcm,bcm2835-dsi0.yaml   |  6 -----
 .../bindings/display/panel/panel-dpi.yaml     |  2 +-
 .../devicetree/bindings/dma/qcom,gpi.yaml     |  2 +-
 .../devicetree/bindings/i3c/i3c.yaml          |  7 ++---
 .../iio/adc/brcm,iproc-static-adc.yaml        |  5 ----
 .../iio/gyroscope/nxp,fxas21002c.yaml         |  2 +-
 .../bindings/iio/light/upisemi,us5182.yaml    |  4 +--
 .../interrupt-controller/loongson,htpic.yaml  |  2 +-
 .../devicetree/bindings/leds/leds-lgm.yaml    | 26 ++++++++++++++++---
 .../bindings/phy/ti,phy-j721e-wiz.yaml        |  2 +-
 .../bindings/power/supply/cw2015_battery.yaml |  2 +-
 .../bindings/power/supply/power-supply.yaml   | 22 ----------------
 .../devicetree/bindings/serial/serial.yaml    |  2 +-
 .../bindings/spi/amlogic,meson-gx-spicc.yaml  |  4 +--
 .../bindings/spi/spi-controller.yaml          | 21 ++++++++-------
 .../devicetree/bindings/spi/spi-mux.yaml      |  8 ++----
 .../devicetree/bindings/spi/st,stm32-spi.yaml |  6 -----
 19 files changed, 58 insertions(+), 79 deletions(-)

diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll1-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll1-clk.yaml
index e9c4cf834aa7..e5d9d45dab8a 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll1-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll1-clk.yaml
@@ -44,7 +44,7 @@ examples:
   - |
     clk@1c20000 {
         #clock-cells = <0>;
-        compatible = "allwinner,sun4i-a10-pll1";
+        compatible = "allwinner,sun4i-a10-pll1-clk";
         reg = <0x01c20000 0x4>;
         clocks = <&osc24M>;
         clock-output-names = "osc24M";
diff --git a/Documentation/devicetree/bindings/clock/milbeaut-clock.yaml b/Documentation/devicetree/bindings/clock/milbeaut-clock.yaml
index 0e8b07710451..6d39344d2b70 100644
--- a/Documentation/devicetree/bindings/clock/milbeaut-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/milbeaut-clock.yaml
@@ -18,10 +18,12 @@ description: |
 
 properties:
   compatible:
-    oneOf:
-      - items:
-          - enum:
-              - socionext,milbeaut-m10v-ccu
+    enum:
+      - socionext,milbeaut-m10v-ccu
+
+  reg:
+    maxItems: 1
+
   clocks:
     maxItems: 1
     description: external clock
@@ -41,7 +43,7 @@ examples:
   # Clock controller node:
   - |
     m10v-clk-ctrl@1d021000 {
-        compatible = "socionext,milbeaut-m10v-clk-ccu";
+        compatible = "socionext,milbeaut-m10v-ccu";
         reg = <0x1d021000 0x4000>;
         #clock-cells = <1>;
         clocks = <&clki40mhz>;
diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2835-dsi0.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2835-dsi0.yaml
index 55c60919991f..32608578a352 100644
--- a/Documentation/devicetree/bindings/display/brcm,bcm2835-dsi0.yaml
+++ b/Documentation/devicetree/bindings/display/brcm,bcm2835-dsi0.yaml
@@ -77,12 +77,6 @@ examples:
 
         clock-output-names = "dsi1_byte", "dsi1_ddr2", "dsi1_ddr";
 
-        pitouchscreen: panel@0 {
-            compatible = "raspberrypi,touchscreen";
-            reg = <0>;
-
-            /* ... */
-        };
     };
 
 ...
diff --git a/Documentation/devicetree/bindings/display/panel/panel-dpi.yaml b/Documentation/devicetree/bindings/display/panel/panel-dpi.yaml
index 0cd74c8dab42..dae0676b5c6e 100644
--- a/Documentation/devicetree/bindings/display/panel/panel-dpi.yaml
+++ b/Documentation/devicetree/bindings/display/panel/panel-dpi.yaml
@@ -40,7 +40,7 @@ additionalProperties: false
 examples:
   - |
     panel {
-        compatible = "osddisplays,osd057T0559-34ts", "panel-dpi";
+        compatible = "startek,startek-kd050c", "panel-dpi";
         label = "osddisplay";
         power-supply = <&vcc_supply>;
         backlight = <&backlight>;
diff --git a/Documentation/devicetree/bindings/dma/qcom,gpi.yaml b/Documentation/devicetree/bindings/dma/qcom,gpi.yaml
index f8142adf9aea..2e66840a78fe 100644
--- a/Documentation/devicetree/bindings/dma/qcom,gpi.yaml
+++ b/Documentation/devicetree/bindings/dma/qcom,gpi.yaml
@@ -64,7 +64,7 @@ examples:
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/dma/qcom-gpi.h>
     gpi_dma0: dma-controller@800000 {
-        compatible = "qcom,gpi-dma";
+        compatible = "qcom,sdm845-gpi-dma";
         #dma-cells = <3>;
         reg = <0x00800000 0x60000>;
         iommus = <&apps_smmu 0x0016 0x0>;
diff --git a/Documentation/devicetree/bindings/i3c/i3c.yaml b/Documentation/devicetree/bindings/i3c/i3c.yaml
index 52042aa44d19..1f82fc923799 100644
--- a/Documentation/devicetree/bindings/i3c/i3c.yaml
+++ b/Documentation/devicetree/bindings/i3c/i3c.yaml
@@ -157,9 +157,10 @@ examples:
         i2c-scl-hz = <100000>;
 
         /* I2C device. */
-        nunchuk: nunchuk@52 {
-            compatible = "nintendo,nunchuk";
-            reg = <0x52 0x0 0x10>;
+        eeprom@57 {
+            compatible = "atmel,24c01";
+            reg = <0x57 0x0 0x10>;
+            pagesize = <0x8>;
         };
 
         /* I3C device with a static I2C address. */
diff --git a/Documentation/devicetree/bindings/iio/adc/brcm,iproc-static-adc.yaml b/Documentation/devicetree/bindings/iio/adc/brcm,iproc-static-adc.yaml
index c562d25bee3b..547697e8bc8b 100644
--- a/Documentation/devicetree/bindings/iio/adc/brcm,iproc-static-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/brcm,iproc-static-adc.yaml
@@ -53,11 +53,6 @@ examples:
         #address-cells = <1>;
         #size-cells = <1>;
 
-        ts_adc_syscon: ts_adc_syscon@180a6000 {
-            compatible = "brcm,iproc-ts-adc-syscon","syscon";
-            reg = <0x180a6000 0xc30>;
-        };
-
         adc {
             compatible = "brcm,iproc-static-adc";
             adc-syscon = <&ts_adc_syscon>;
diff --git a/Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.yaml b/Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.yaml
index d97ee774d6a6..3f57a1b813e6 100644
--- a/Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.yaml
+++ b/Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.yaml
@@ -83,7 +83,7 @@ examples:
         #size-cells = <0>;
 
         gyroscope@0 {
-          compatible = "nxp,fxas2102c";
+          compatible = "nxp,fxas21002c";
           reg = <0x0>;
 
           spi-max-frequency = <2000000>;
diff --git a/Documentation/devicetree/bindings/iio/light/upisemi,us5182.yaml b/Documentation/devicetree/bindings/iio/light/upisemi,us5182.yaml
index de5882cb3360..dd78abe0ec8d 100644
--- a/Documentation/devicetree/bindings/iio/light/upisemi,us5182.yaml
+++ b/Documentation/devicetree/bindings/iio/light/upisemi,us5182.yaml
@@ -11,12 +11,12 @@ maintainers:
 
 properties:
   compatible:
-    const: upisemi,asd5182
+    const: upisemi,usd5182
 
   reg:
     maxItems: 1
 
-  upsemi,glass-coef:
+  upisemi,glass-coef:
     $ref: /schemas/types.yaml#/definitions/uint32
     description: |
       glass attenuation factor - compensation factor of resolution 1000
diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,htpic.yaml b/Documentation/devicetree/bindings/interrupt-controller/loongson,htpic.yaml
index d1d52d1db2be..d6bc1a687fc7 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/loongson,htpic.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,htpic.yaml
@@ -47,7 +47,7 @@ examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
     htintc: interrupt-controller@1fb000080 {
-      compatible = "loongson,htintc-1.0";
+      compatible = "loongson,htpic-1.0";
       reg = <0xfb000080 0x40>;
       interrupt-controller;
       #interrupt-cells = <1>;
diff --git a/Documentation/devicetree/bindings/leds/leds-lgm.yaml b/Documentation/devicetree/bindings/leds/leds-lgm.yaml
index 32bbf146c01d..f8d7963c3a13 100644
--- a/Documentation/devicetree/bindings/leds/leds-lgm.yaml
+++ b/Documentation/devicetree/bindings/leds/leds-lgm.yaml
@@ -14,6 +14,17 @@ properties:
   compatible:
     const: intel,lgm-ssoled
 
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: sso
+      - const: fpid
+
   gpio-controller: true
 
   '#gpio-cells':
@@ -36,8 +47,15 @@ properties:
 
     additionalProperties: false
 
+    properties:
+      '#address-cells':
+        const: 1
+
+      '#size-cells':
+        const: 0
+
     patternProperties:
-      "^led@[0-23]$":
+      "^led@[0-2]$":
         type: object
 
         properties:
@@ -81,7 +99,7 @@ examples:
     #include <dt-bindings/leds/common.h>
 
     ssogpio: ssogpio@e0d40000 {
-      compatible = "intel,sso-led";
+      compatible = "intel,lgm-ssoled";
       reg = <0xE0D40000 0x2E4>;
       gpio-controller;
       #gpio-cells = <2>;
@@ -103,8 +121,8 @@ examples:
           led-gpio = <&ssogpio 0 0>;
         };
 
-        led@23 {
-          reg = <23>;
+        led@2 {
+          reg = <2>;
           function = LED_FUNCTION_POWER;
           color = <LED_COLOR_ID_GREEN>;
           led-gpio = <&ssogpio 23 0>;
diff --git a/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml
index bbbd85501ada..d0040255c591 100644
--- a/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml
+++ b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml
@@ -218,7 +218,7 @@ examples:
            };
 
            serdes@5000000 {
-                  compatible = "cdns,ti,sierra-phy-t0";
+                  compatible = "ti,sierra-phy-t0";
                   reg-names = "serdes";
                   reg = <0x5000000 0x10000>;
                   #address-cells = <1>;
diff --git a/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml b/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml
index 5fcdf5801536..c73abb2ff513 100644
--- a/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml
+++ b/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml
@@ -61,7 +61,7 @@ examples:
         #size-cells = <0>;
 
         cw2015@62 {
-            compatible = "cellwise,cw201x";
+            compatible = "cellwise,cw2015";
             reg = <0x62>;
             cellwise,battery-profile = /bits/ 8 <
                 0x17 0x67 0x80 0x73 0x6E 0x6C 0x6B 0x63
diff --git a/Documentation/devicetree/bindings/power/supply/power-supply.yaml b/Documentation/devicetree/bindings/power/supply/power-supply.yaml
index c5c55f627251..259760167759 100644
--- a/Documentation/devicetree/bindings/power/supply/power-supply.yaml
+++ b/Documentation/devicetree/bindings/power/supply/power-supply.yaml
@@ -18,25 +18,3 @@ properties:
 
 additionalProperties: true
 
-examples:
-  - |
-    power {
-      #address-cells = <1>;
-      #size-cells = <0>;
-
-      usb_charger:charger@e {
-        compatible = "some,usb-charger";
-        reg = <0xe>;
-      };
-
-      ac_charger:charger@c {
-        compatible = "some,ac-charger";
-        reg = <0xc>;
-      };
-
-      battery:battery@b {
-        compatible = "some,battery";
-        reg = <0xb>;
-        power-supplies = <&usb_charger>, <&ac_charger>;
-      };
-    };
diff --git a/Documentation/devicetree/bindings/serial/serial.yaml b/Documentation/devicetree/bindings/serial/serial.yaml
index 65e75d040521..eea300405816 100644
--- a/Documentation/devicetree/bindings/serial/serial.yaml
+++ b/Documentation/devicetree/bindings/serial/serial.yaml
@@ -134,7 +134,7 @@ examples:
             interrupts = <1>;
 
             bluetooth {
-                    compatible = "brcm,bcm43341-bt";
+                    compatible = "brcm,bcm4330-bt";
                     interrupt-parent = <&gpio>;
                     interrupts = <10>;
             };
diff --git a/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml b/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml
index 667dedefd69f..e3fb553d9180 100644
--- a/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml
+++ b/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml
@@ -90,8 +90,8 @@ examples:
           #address-cells = <1>;
           #size-cells = <0>;
 
-          ethernet-switch@0 {
-              compatible = "micrel,ks8995m";
+          display@0 {
+              compatible = "lg,lg4573";
               spi-max-frequency = <1000000>;
               reg = <0>;
           };
diff --git a/Documentation/devicetree/bindings/spi/spi-controller.yaml b/Documentation/devicetree/bindings/spi/spi-controller.yaml
index 06786f1b43d2..0477396e4945 100644
--- a/Documentation/devicetree/bindings/spi/spi-controller.yaml
+++ b/Documentation/devicetree/bindings/spi/spi-controller.yaml
@@ -181,22 +181,23 @@ additionalProperties: true
 
 examples:
   - |
-    spi@f00 {
+    spi@80010000 {
         #address-cells = <1>;
         #size-cells = <0>;
-        compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
-        reg = <0xf00 0x20>;
-        interrupts = <2 13 0 2 14 0>;
-        interrupt-parent = <&mpc5200_pic>;
-
-        ethernet-switch@0 {
-            compatible = "micrel,ks8995m";
+        compatible = "fsl,imx28-spi";
+        reg = <0x80010000 0x2000>;
+        interrupts = <96>;
+        dmas = <&dma_apbh 0>;
+        dma-names = "rx-tx";
+
+        display@0 {
+            compatible = "lg,lg4573";
             spi-max-frequency = <1000000>;
             reg = <0>;
         };
 
-        codec@1 {
-            compatible = "ti,tlv320aic26";
+        sensor@1 {
+            compatible = "bosch,bme680";
             spi-max-frequency = <100000>;
             reg = <1>;
         };
diff --git a/Documentation/devicetree/bindings/spi/spi-mux.yaml b/Documentation/devicetree/bindings/spi/spi-mux.yaml
index 6c21a132b51f..d09c6355e22d 100644
--- a/Documentation/devicetree/bindings/spi/spi-mux.yaml
+++ b/Documentation/devicetree/bindings/spi/spi-mux.yaml
@@ -75,16 +75,12 @@ examples:
             spi-flash@0 {
                 compatible = "jedec,spi-nor";
                 reg = <0>;
-                #address-cells = <1>;
-                #size-cells = <0>;
                 spi-max-frequency = <40000000>;
             };
 
-            spi-device@1 {
-                compatible = "lineartechnology,ltc2488";
+            sensor@1 {
+                compatible = "bosch,bme680";
                 reg = <1>;
-                #address-cells = <1>;
-                #size-cells = <0>;
                 spi-max-frequency = <10000000>;
             };
         };
diff --git a/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml b/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml
index d11806b1ede3..2d9af4c506bb 100644
--- a/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml
+++ b/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml
@@ -96,12 +96,6 @@ examples:
       dma-names = "rx", "tx";
       cs-gpios = <&gpioa 11 0>;
 
-      aardvark@0 {
-        compatible = "totalphase,aardvark";
-        reg = <0>;
-        spi-max-frequency = <4000000>;
-        st,spi-midi-ns = <4000>;
-      };
     };
 
 ...
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 12+ messages in thread

end of thread, other threads:[~2021-03-26 12:41 UTC | newest]

Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-03-16 19:49 [PATCH] dt-bindings: Clean-up undocumented compatible strings Rob Herring
2021-03-16 20:52 ` Mark Brown
2021-03-17  1:35 ` Stephen Boyd
2021-03-17  5:55 ` Greg Kroah-Hartman
2021-03-17  5:57 ` Kishon Vijay Abraham I
2021-03-17  9:37 ` Sebastian Reichel
2021-03-17  9:46 ` Maxime Ripard
2021-03-17 10:04 ` Vinod Koul
2021-03-17 10:25 ` Alexandre Belloni
2021-03-17 10:57 ` Alain Volmat
2021-03-17 17:26 ` Jonathan Cameron
2021-03-26 12:41 ` Thierry Reding

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).