linux-leds.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Hermes Zhang <chenhui.zhang@axis.com>
To: <pavel@ucw.cz>, <dmurphy@ti.com>, <robh+dt@kernel.org>
Cc: <linux-leds@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>, <chenhuiz@axis.com>,
	<lkml@axis.com>, <kernel@axis.com>
Subject: [PATCH v2 1/2] dt-binding: leds: Document leds-multi-gpio bindings
Date: Fri, 26 Mar 2021 13:28:00 +0800	[thread overview]
Message-ID: <20210326052801.17666-2-chenhui.zhang@axis.com> (raw)
In-Reply-To: <20210326052801.17666-1-chenhui.zhang@axis.com>

From: Hermes Zhang <chenhuiz@axis.com>

This binding represents LED devices which are controller with
multiple GPIO lines in order to achieve more than two brightness
states.

Signed-off-by: Hermes Zhang <chenhuiz@axis.com>
---
 .../bindings/leds/leds-multi-gpio.yaml        | 50 +++++++++++++++++++
 1 file changed, 50 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/leds/leds-multi-gpio.yaml

diff --git a/Documentation/devicetree/bindings/leds/leds-multi-gpio.yaml b/Documentation/devicetree/bindings/leds/leds-multi-gpio.yaml
new file mode 100644
index 000000000000..1549f21e8d6e
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-multi-gpio.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/leds-multi-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Multiple GPIOs LED driver
+
+maintainers:
+  - Hermes Zhang <chenhuiz@axis.com>
+
+description:
+  This will support some LED made of multiple GPIOs and the brightness of the
+  LED could map to different states of the GPIOs.
+
+properties:
+  compatible:
+    const: multi-gpio-led
+
+  led-gpios:
+    description: Array of one or more GPIOs pins used to control the LED.
+    minItems: 1
+    maxItems: 8  # Should be enough
+
+  led-states:
+    description: |
+      The array list the supported states here which will map to brightness
+      from 0 to maximum. Each item in the array will present all the GPIOs
+      value by bit.
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    minItems: 1
+    maxItems: 256 # Should be enough
+
+required:
+  - compatible
+  - led-gpios
+  - led-states
+
+additionalProperties: false
+
+examples:
+  - |
+    gpios-led {
+      compatible = "multi-gpio-led";
+
+      led-gpios = <&gpio0 23 0x1>,
+                  <&gpio0 24 0x1>;
+      led-states = /bits/ 8 <0x00 0x01 0x02 0x03>;
+    };
+...
-- 
2.20.1


  reply	other threads:[~2021-03-26  5:29 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-03-26  5:27 [PATCH v2 0/2] New multiple GPIOs LED driver Hermes Zhang
2021-03-26  5:28 ` Hermes Zhang [this message]
2021-03-27 18:12   ` [PATCH v2 1/2] dt-binding: leds: Document leds-multi-gpio bindings Rob Herring
2021-03-29  6:03     ` Hermes Zhang
2021-03-26  5:28 ` [PATCH v2 2/2] leds: leds-multi-gpio: Add multiple GPIOs LED driver Hermes Zhang
2021-03-26  5:56   ` Alexander Dahl
2021-03-26  6:07     ` Hermes Zhang
2021-03-26 13:49   ` Pavel Machek
2021-03-29  6:00     ` Hermes Zhang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210326052801.17666-2-chenhui.zhang@axis.com \
    --to=chenhui.zhang@axis.com \
    --cc=chenhuiz@axis.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dmurphy@ti.com \
    --cc=kernel@axis.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-leds@vger.kernel.org \
    --cc=lkml@axis.com \
    --cc=pavel@ucw.cz \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).