Re: [PATCH v2 2/2] leds: leds-multi-gpio: Add multiple GPIOs LED driver

[Alexander Dahl <post@lespocky.de>]

[-- Attachment #1: Type: text/plain, Size: 7708 bytes --]

Hello Hermes,

great to see your improved series. See below for my remarks.

On Fri, Mar 26, 2021 at 01:28:01PM +0800, Hermes Zhang wrote:
> From: Hermes Zhang <chenhuiz@axis.com>
> 
> Introduce a new multiple GPIOs LED driver. This LED will made of
> multiple GPIOs (up to 8) and will map different brightness to different
> GPIOs states which defined in dts file.
> 
> Signed-off-by: Hermes Zhang <chenhuiz@axis.com>
> ---
>  drivers/leds/Kconfig                  |   3 +
>  drivers/leds/Makefile                 |   3 +
>  drivers/leds/simple/Kconfig           |  23 ++++
>  drivers/leds/simple/Makefile          |   3 +
>  drivers/leds/simple/leds-multi-gpio.c | 144 ++++++++++++++++++++++++++
>  5 files changed, 176 insertions(+)
>  create mode 100644 drivers/leds/simple/Kconfig
>  create mode 100644 drivers/leds/simple/Makefile
>  create mode 100644 drivers/leds/simple/leds-multi-gpio.c
> 
> diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
> index b6742b4231bf..f95217b2fcf1 100644
> --- a/drivers/leds/Kconfig
> +++ b/drivers/leds/Kconfig
> @@ -937,4 +937,7 @@ source "drivers/leds/trigger/Kconfig"
>  comment "LED Blink"
>  source "drivers/leds/blink/Kconfig"
>  
> +comment "LED Simple"
> +source "drivers/leds/simple/Kconfig"
> +
>  endif # NEW_LEDS
> diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
> index 2a698df9da57..26917d93fa03 100644
> --- a/drivers/leds/Makefile
> +++ b/drivers/leds/Makefile
> @@ -111,3 +111,6 @@ obj-$(CONFIG_LEDS_TRIGGERS)		+= trigger/
>  
>  # LED Blink
>  obj-$(CONFIG_LEDS_BLINK)                += blink/
> +
> +# LED Blink
> +obj-$(CONFIG_LEDS_SIMPLE)		+= simple/

That comment should read "LED Simple", right?

> diff --git a/drivers/leds/simple/Kconfig b/drivers/leds/simple/Kconfig
> new file mode 100644
> index 000000000000..7aef82701f86
> --- /dev/null
> +++ b/drivers/leds/simple/Kconfig
> @@ -0,0 +1,23 @@
> +menuconfig LEDS_SIMPLE
> +	bool "Simple LED support"
> +	depends on LEDS_CLASS
> +	help
> +	  This option enables simple leds support for the leds class.
> +	  If unsure, say Y.
> +
> +if LEDS_SIMPLE
> +
> +config LEDS_MULTI_GPIO
> +	tristate "LED Support for multiple GPIOs LED"
> +	depends on LEDS_CLASS
> +	depends on GPIOLIB
> +	depends on OF
> +	help
> +	  This option enables support for a multiple GPIOs LED. Such LED is made
> +	  of multiple GPIOs and could change the brightness by setting different
> +	  states of the GPIOs.
> +
> +	  To compile this driver as a module, choose M here: the
> +	  module will be called leds-multi-gpio.
> +
> +endif # LEDS_SIMPLE

I'm wondering why this is part of this driver? I suppose there's no
such folder yet, although Pavel suggested. Would it make sense to put
that Kconfig menu entry and folder creation to a separate commit?

> diff --git a/drivers/leds/simple/Makefile b/drivers/leds/simple/Makefile
> new file mode 100644
> index 000000000000..2ba655fdc175
> --- /dev/null
> +++ b/drivers/leds/simple/Makefile
> @@ -0,0 +1,3 @@
> +# SPDX-License-Identifier: GPL-2.0
> +
> +obj-$(CONFIG_LEDS_MULTI_GPIO)	+= leds-multi-gpio.o
> diff --git a/drivers/leds/simple/leds-multi-gpio.c b/drivers/leds/simple/leds-multi-gpio.c
> new file mode 100644
> index 000000000000..14fdaa5a2aac
> --- /dev/null
> +++ b/drivers/leds/simple/leds-multi-gpio.c
> @@ -0,0 +1,144 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2021 Axis Communications AB
> + */
> +
> +#include <linux/leds.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +
> +
> +#define MAX_GPIO_NUM  8
> +
> +struct multi_gpio_led_priv {
> +	struct led_classdev cdev;
> +
> +	struct gpio_descs *gpios;
> +
> +	u16 nr_states;
> +
> +	u8 states[0];
> +};
> +
> +
> +static void multi_gpio_led_set(struct led_classdev *led_cdev,
> +	enum led_brightness value)
> +{
> +	struct multi_gpio_led_priv *priv;
> +	int idx;
> +
> +	DECLARE_BITMAP(values, MAX_GPIO_NUM);
> +
> +	priv = container_of(led_cdev, struct multi_gpio_led_priv, cdev);
> +
> +	idx = value > led_cdev->max_brightness ? led_cdev->max_brightness : value;
> +
> +	values[0] = priv->states[idx];
> +
> +	gpiod_set_array_value(priv->gpios->ndescs, priv->gpios->desc,
> +	    priv->gpios->info, values);
> +}
> +
> +static int multi_gpio_led_probe(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct device_node *node = dev->of_node;
> +	struct multi_gpio_led_priv *priv = NULL;
> +	int ret;
> +	const char *state = NULL;
> +	struct led_init_data init_data = {};
> +	struct gpio_descs *gpios;
> +	u16 nr_states;
> +
> +	gpios = devm_gpiod_get_array(dev, "led", GPIOD_OUT_LOW);
> +	if (IS_ERR(gpios))
> +		return PTR_ERR(gpios);
> +
> +	if (gpios->ndescs >= MAX_GPIO_NUM) {
> +		dev_err(dev, "Too many GPIOs\n");
> +		return -EINVAL;
> +	}
> +
> +	ret = of_property_count_u8_elems(node, "led-states");
> +	if (ret < 0)
> +		return ret;
> +
> +	if (ret != 1 << gpios->ndescs) {
> +		dev_err(dev, "led-states number should equal to 2^led-gpios\n");
> +		return -EINVAL;
> +	}
> +
> +	nr_states = ret;
> +
> +	priv = devm_kzalloc(dev, sizeof(struct multi_gpio_led_priv)
> +			+ sizeof(u8) * nr_states , GFP_KERNEL);
> +	if (!priv)
> +		return -ENOMEM;
> +
> +	ret = of_property_read_u8_array(node, "led-states", priv->states, nr_states);
> +	if (ret)
> +		return ret;
> +
> +	priv->gpios = gpios;
> +	priv->nr_states = nr_states;
> +
> +	priv->cdev.max_brightness = nr_states;
> +	priv->cdev.default_trigger = of_get_property(node, "linux,default-trigger", NULL);
> +	priv->cdev.brightness_set = multi_gpio_led_set;
> +
> +	init_data.fwnode = of_fwnode_handle(node);
> +
> +	ret = devm_led_classdev_register_ext(dev, &priv->cdev, &init_data);
> +	if (ret < 0)
> +		return ret;
> +
> +	of_property_read_string(node, "default-state", &state);
> +	if (!strcmp(state, "on"))
> +		multi_gpio_led_set(&priv->cdev, priv->cdev.max_brightness);
> +	else
> +		multi_gpio_led_set(&priv->cdev, 0);
> +
> +	platform_set_drvdata(pdev, priv);
> +
> +	return 0;
> +}
> +
> +static void multi_gpio_led_shutdown(struct platform_device *pdev)
> +{
> +	struct multi_gpio_led_priv *priv = platform_get_drvdata(pdev);
> +
> +	multi_gpio_led_set(&priv->cdev, 0);
> +}
> +
> +static int multi_gpio_led_remove(struct platform_device *pdev)
> +{
> +	multi_gpio_led_shutdown(pdev);
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id of_multi_gpio_led_match[] = {
> +	{ .compatible = "multi-gpio-led", },
> +	{},
> +};
> +
> +MODULE_DEVICE_TABLE(of, of_multi_gpio_led_match);
> +
> +static struct platform_driver multi_gpio_led_driver = {
> +	.probe		= multi_gpio_led_probe,
> +	.remove		= multi_gpio_led_remove,
> +	.shutdown	= multi_gpio_led_shutdown,
> +	.driver		= {
> +		.name	= "multi-gpio-led",
> +		.of_match_table = of_multi_gpio_led_match,
> +	},
> +};
> +
> +module_platform_driver(multi_gpio_led_driver);
> +
> +MODULE_AUTHOR("Hermes Zhang <chenhui.zhang@axis.com>");
> +MODULE_DESCRIPTION("Multiple GPIOs LED driver");
> +MODULE_LICENSE("GPL v2");
> +MODULE_ALIAS("platform:leds-multi-gpio");

I did not review thouroughly, but in my mail the indentation looks
wrong. Did checkpatch complain?

Greets
Alex

-- 
/"\ ASCII RIBBON | »With the first link, the chain is forged. The first
\ / CAMPAIGN     | speech censured, the first thought forbidden, the
 X  AGAINST      | first freedom denied, chains us all irrevocably.«
/ \ HTML MAIL    | (Jean-Luc Picard, quoting Judge Aaron Satie)

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]