From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 90F3BC433EF for ; Sun, 14 Nov 2021 22:54:37 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 5DE6C60F01 for ; Sun, 14 Nov 2021 22:54:37 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S231652AbhKNW53 (ORCPT ); Sun, 14 Nov 2021 17:57:29 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:44692 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S231496AbhKNW5Y (ORCPT ); Sun, 14 Nov 2021 17:57:24 -0500 Received: from mail-lj1-x22d.google.com (mail-lj1-x22d.google.com [IPv6:2a00:1450:4864:20::22d]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 561F7C061746; Sun, 14 Nov 2021 14:54:29 -0800 (PST) Received: by mail-lj1-x22d.google.com with SMTP id i63so31403200lji.3; Sun, 14 Nov 2021 14:54:29 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20210112; h=from:to:cc:subject:date:message-id:mime-version :content-transfer-encoding; bh=4s7bw72a+4Qe+ggB/EasoDTMUz0gQ/J9xbfgWy5bBUw=; b=NKB7rrJVW8qY9W2ONJLBlXIS3mtOCPNfGwx4Ehw+b5REbhR+76eUptQSAP+tTNYNru qB513LLV5Jzffzfmv7mxa9+mmIAxiEYJtsxAz8SDKgLQwY1cmNdDBMB1aRTyF30DJrVr 8jvCU17dAt+pPGFYNEnZv1NEmx+Oylles5ea5xGE7fI0mgLotp85f0R8XXB1rq/uYH0l uLBhnthXx81tpFsynLZWbuT5OLXpFZQ+wYH9YDr0rTfe4HudvbwLjC9Jg59cDx/+r3v0 cDlkOZdY5IgOkf7BM/ENnarDa/oXJDZ/0MIDfKfkHSMW4woc8cjhzUgxKzqClcTXv5J5 nP2w== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=x-gm-message-state:from:to:cc:subject:date:message-id:mime-version :content-transfer-encoding; bh=4s7bw72a+4Qe+ggB/EasoDTMUz0gQ/J9xbfgWy5bBUw=; b=itTYayfFTTxj2zMYpyrD9F3Xtezz9DRyzqTdkuEGaAZv4uDjtt8NUJh+QYGGbOxT2l wbGVug1jy3xSc4LP0mesR7POHwfMyB1kMgW1Xj9I/xtpfVbQ72Bk78t4VGMKL1YVKjfL 6ewt2oOQu4/nJdWyEbWQDau2Fl+gKFN26S+fzbJfTkCf0DqHbB/4DDhFYP/ND2YbqTqz LzN7LAINstJ4Odw9ezazsHdIVl45XujHNjIt1j4ErhVhaC/Qtf3t63X9H4aYk8pDxPpJ U0tZ6NffmpTKH9oFVtbZGlVFP8+0h77gYH79T4/XnrjYzses5h9tx/jaMYlKRNJe2/3N m+Zg== X-Gm-Message-State: AOAM533h0KmFbIKzEe47yHjuz4PObciZw13maOm6Ngikucti2RHtVfm5 CzAPIUQczpoSAPoNEPdng2wfJzfWhxk= X-Google-Smtp-Source: ABdhPJy7FOCcUvozb3PvROxlJ7nmzrezYuINym9BgMyz/9Y/ewuleGhAUQ5HdfkLTxsVLntdb0JGcQ== X-Received: by 2002:a05:651c:907:: with SMTP id e7mr36378263ljq.300.1636930467490; Sun, 14 Nov 2021 14:54:27 -0800 (PST) Received: from localhost.lan (ip-194-187-74-233.konfederacka.maverick.com.pl. [194.187.74.233]) by smtp.gmail.com with ESMTPSA id n9sm1336890lji.131.2021.11.14.14.54.26 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Sun, 14 Nov 2021 14:54:27 -0800 (PST) From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= To: Pavel Machek , Rob Herring Cc: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= , linux-leds@vger.kernel.org, devicetree@vger.kernel.org, Florian Fainelli , bcm-kernel-feedback-list@broadcom.com, =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= Subject: [PATCH] dt-bindings: leds: convert BCM6328 controller to the json-schema Date: Sun, 14 Nov 2021 23:54:16 +0100 Message-Id: <20211114225416.3174-1-zajec5@gmail.com> X-Mailer: git-send-email 2.31.1 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Precedence: bulk List-ID: X-Mailing-List: linux-leds@vger.kernel.org From: Rafał Miłecki This helps validating DTS files. Signed-off-by: Rafał Miłecki --- .../devicetree/bindings/leds/leds-bcm6328.txt | 319 -------------- .../bindings/leds/leds-bcm6328.yaml | 403 ++++++++++++++++++ 2 files changed, 403 insertions(+), 319 deletions(-) delete mode 100644 Documentation/devicetree/bindings/leds/leds-bcm6328.txt create mode 100644 Documentation/devicetree/bindings/leds/leds-bcm6328.yaml diff --git a/Documentation/devicetree/bindings/leds/leds-bcm6328.txt b/Documentation/devicetree/bindings/leds/leds-bcm6328.txt deleted file mode 100644 index a555d94084b7..000000000000 --- a/Documentation/devicetree/bindings/leds/leds-bcm6328.txt +++ /dev/null @@ -1,319 +0,0 @@ -LEDs connected to Broadcom BCM6328 controller - -This controller is present on BCM6318, BCM6328, BCM6362 and BCM63268. -In these SoCs it's possible to control LEDs both as GPIOs or by hardware. -However, on some devices there are Serial LEDs (LEDs connected to a 74x164 -controller), which can either be controlled by software (exporting the 74x164 -as spi-gpio. See Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml), -or by hardware using this driver. -Some of these Serial LEDs are hardware controlled (e.g. ethernet LEDs) and -exporting the 74x164 as spi-gpio prevents those LEDs to be hardware -controlled, so the only chance to keep them working is by using this driver. - -BCM6328 LED controller has a HWDIS register, which controls whether a LED -should be controlled by a hardware signal instead of the MODE register value, -with 0 meaning hardware control enabled and 1 hardware control disabled. This -is usually 1:1 for hardware to LED signals, but through the activity/link -registers you have some limited control over rerouting the LEDs (as -explained later in brcm,link-signal-sources). Even if a LED is hardware -controlled you are still able to make it blink or light it up if it isn't, -but you can't turn it off if the hardware decides to light it up. For this -reason, hardware controlled LEDs aren't registered as LED class devices. - -Required properties: - - compatible : should be "brcm,bcm6328-leds". - - #address-cells : must be 1. - - #size-cells : must be 0. - - reg : BCM6328 LED controller address and size. - -Optional properties: - - brcm,serial-leds : Boolean, enables Serial LEDs. - Default : false - - brcm,serial-mux : Boolean, enables Serial LEDs multiplexing. - Default : false - - brcm,serial-clk-low : Boolean, makes clock signal active low. - Default : false - - brcm,serial-dat-low : Boolean, makes data signal active low. - Default : false - - brcm,serial-shift-inv : Boolean, inverts Serial LEDs shift direction. - Default : false - -Each LED is represented as a sub-node of the brcm,bcm6328-leds device. - -LED sub-node required properties: - - reg : LED pin number (only LEDs 0 to 23 are valid). - -LED sub-node optional properties: - a) Optional properties for sub-nodes related to software controlled LEDs: - - label : see Documentation/devicetree/bindings/leds/common.txt - - active-low : Boolean, makes LED active low. - Default : false - - default-state : see - Documentation/devicetree/bindings/leds/common.txt - - linux,default-trigger : see - Documentation/devicetree/bindings/leds/common.txt - - b) Optional properties for sub-nodes related to hardware controlled LEDs: - - brcm,hardware-controlled : Boolean, makes this LED hardware controlled. - Default : false - - brcm,link-signal-sources : An array of hardware link - signal sources. Up to four link hardware signals can get muxed into - these LEDs. Only valid for LEDs 0 to 7, where LED signals 0 to 3 may - be muxed to LEDs 0 to 3, and signals 4 to 7 may be muxed to LEDs - 4 to 7. A signal can be muxed to more than one LED, and one LED can - have more than one source signal. - - brcm,activity-signal-sources : An array of hardware activity - signal sources. Up to four activity hardware signals can get muxed into - these LEDs. Only valid for LEDs 0 to 7, where LED signals 0 to 3 may - be muxed to LEDs 0 to 3, and signals 4 to 7 may be muxed to LEDs - 4 to 7. A signal can be muxed to more than one LED, and one LED can - have more than one source signal. - -Examples: -Scenario 1 : BCM6328 with 4 EPHY LEDs - leds0: led-controller@10000800 { - compatible = "brcm,bcm6328-leds"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x10000800 0x24>; - - alarm_red@2 { - reg = <2>; - active-low; - label = "red:alarm"; - }; - inet_green@3 { - reg = <3>; - active-low; - label = "green:inet"; - }; - power_green@4 { - reg = <4>; - active-low; - label = "green:power"; - default-state = "on"; - }; - ephy0_spd@17 { - reg = <17>; - brcm,hardware-controlled; - }; - ephy1_spd@18 { - reg = <18>; - brcm,hardware-controlled; - }; - ephy2_spd@19 { - reg = <19>; - brcm,hardware-controlled; - }; - ephy3_spd@20 { - reg = <20>; - brcm,hardware-controlled; - }; - }; - -Scenario 2 : BCM63268 with Serial/GPHY0 LEDs - leds0: led-controller@10001900 { - compatible = "brcm,bcm6328-leds"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x10001900 0x24>; - brcm,serial-leds; - brcm,serial-dat-low; - brcm,serial-shift-inv; - - gphy0_spd0@0 { - reg = <0>; - brcm,hardware-controlled; - brcm,link-signal-sources = <0>; - }; - gphy0_spd1@1 { - reg = <1>; - brcm,hardware-controlled; - brcm,link-signal-sources = <1>; - }; - inet_red@2 { - reg = <2>; - active-low; - label = "red:inet"; - }; - dsl_green@3 { - reg = <3>; - active-low; - label = "green:dsl"; - }; - usb_green@4 { - reg = <4>; - active-low; - label = "green:usb"; - }; - wps_green@7 { - reg = <7>; - active-low; - label = "green:wps"; - }; - inet_green@8 { - reg = <8>; - active-low; - label = "green:inet"; - }; - ephy0_act@9 { - reg = <9>; - brcm,hardware-controlled; - }; - ephy1_act@10 { - reg = <10>; - brcm,hardware-controlled; - }; - ephy2_act@11 { - reg = <11>; - brcm,hardware-controlled; - }; - gphy0_act@12 { - reg = <12>; - brcm,hardware-controlled; - }; - ephy0_spd@13 { - reg = <13>; - brcm,hardware-controlled; - }; - ephy1_spd@14 { - reg = <14>; - brcm,hardware-controlled; - }; - ephy2_spd@15 { - reg = <15>; - brcm,hardware-controlled; - }; - power_green@20 { - reg = <20>; - active-low; - label = "green:power"; - default-state = "on"; - }; - }; - -Scenario 3 : BCM6362 with 1 LED for each EPHY - leds0: led-controller@10001900 { - compatible = "brcm,bcm6328-leds"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x10001900 0x24>; - - usb@0 { - reg = <0>; - brcm,hardware-controlled; - brcm,link-signal-sources = <0>; - brcm,activity-signal-sources = <0>; - /* USB link/activity routed to USB LED */ - }; - inet@1 { - reg = <1>; - brcm,hardware-controlled; - brcm,activity-signal-sources = <1>; - /* INET activity routed to INET LED */ - }; - ephy0@4 { - reg = <4>; - brcm,hardware-controlled; - brcm,link-signal-sources = <4>; - /* EPHY0 link routed to EPHY0 LED */ - }; - ephy1@5 { - reg = <5>; - brcm,hardware-controlled; - brcm,link-signal-sources = <5>; - /* EPHY1 link routed to EPHY1 LED */ - }; - ephy2@6 { - reg = <6>; - brcm,hardware-controlled; - brcm,link-signal-sources = <6>; - /* EPHY2 link routed to EPHY2 LED */ - }; - ephy3@7 { - reg = <7>; - brcm,hardware-controlled; - brcm,link-signal-sources = <7>; - /* EPHY3 link routed to EPHY3 LED */ - }; - power_green@20 { - reg = <20>; - active-low; - label = "green:power"; - default-state = "on"; - }; - }; - -Scenario 4 : BCM6362 with 1 LED for all EPHYs - leds0: led-controller@10001900 { - compatible = "brcm,bcm6328-leds"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x10001900 0x24>; - - usb@0 { - reg = <0>; - brcm,hardware-controlled; - brcm,link-signal-sources = <0 1>; - brcm,activity-signal-sources = <0 1>; - /* USB/INET link/activity routed to USB LED */ - }; - ephy@4 { - reg = <4>; - brcm,hardware-controlled; - brcm,link-signal-sources = <4 5 6 7>; - /* EPHY0/1/2/3 link routed to EPHY0 LED */ - }; - power_green@20 { - reg = <20>; - active-low; - label = "green:power"; - default-state = "on"; - }; - }; - -Scenario 5 : BCM6362 with EPHY LEDs swapped - leds0: led-controller@10001900 { - compatible = "brcm,bcm6328-leds"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x10001900 0x24>; - - usb@0 { - reg = <0>; - brcm,hardware-controlled; - brcm,link-signal-sources = <0>; - brcm,activity-signal-sources = <0 1>; - /* USB link/act and INET act routed to USB LED */ - }; - ephy0@4 { - reg = <4>; - brcm,hardware-controlled; - brcm,link-signal-sources = <7>; - /* EPHY3 link routed to EPHY0 LED */ - }; - ephy1@5 { - reg = <5>; - brcm,hardware-controlled; - brcm,link-signal-sources = <6>; - /* EPHY2 link routed to EPHY1 LED */ - }; - ephy2@6 { - reg = <6>; - brcm,hardware-controlled; - brcm,link-signal-sources = <5>; - /* EPHY1 link routed to EPHY2 LED */ - }; - ephy3@7 { - reg = <7>; - brcm,hardware-controlled; - brcm,link-signal-sources = <4>; - /* EPHY0 link routed to EPHY3 LED */ - }; - power_green@20 { - reg = <20>; - active-low; - label = "green:power"; - default-state = "on"; - }; - }; diff --git a/Documentation/devicetree/bindings/leds/leds-bcm6328.yaml b/Documentation/devicetree/bindings/leds/leds-bcm6328.yaml new file mode 100644 index 000000000000..b7e72feb7a07 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/leds-bcm6328.yaml @@ -0,0 +1,403 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/leds-bcm6328.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: LEDs connected to Broadcom BCM6328 controller + +maintainers: + - Álvaro Fernández Rojas + +description: | + This controller is present on BCM6318, BCM6328, BCM6362 and BCM63268. + In these SoCs it's possible to control LEDs both as GPIOs or by hardware. + However, on some devices there are Serial LEDs (LEDs connected to a 74x164 + controller), which can either be controlled by software (exporting the 74x164 + as spi-gpio. See + Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml), or by hardware + using this driver. + Some of these Serial LEDs are hardware controlled (e.g. ethernet LEDs) and + exporting the 74x164 as spi-gpio prevents those LEDs to be hardware + controlled, so the only chance to keep them working is by using this driver. + + BCM6328 LED controller has a HWDIS register, which controls whether a LED + should be controlled by a hardware signal instead of the MODE register value, + with 0 meaning hardware control enabled and 1 hardware control disabled. This + is usually 1:1 for hardware to LED signals, but through the activity/link + registers you have some limited control over rerouting the LEDs (as + explained later in brcm,link-signal-sources). Even if a LED is hardware + controlled you are still able to make it blink or light it up if it isn't, + but you can't turn it off if the hardware decides to light it up. For this + reason, hardware controlled LEDs aren't registered as LED class devices. + + Each LED is represented as a sub-node of the brcm,bcm6328-leds device. + +properties: + compatible: + const: brcm,bcm6328-leds + + reg: + maxItems: 1 + + brcm,serial-leds: + type: boolean + description: Enables Serial LEDs. + + brcm,serial-mux: + type: boolean + description: Enables Serial LEDs multiplexing. + + brcm,serial-clk-low: + type: boolean + description: Makes clock signal active low. + + brcm,serial-dat-low: + type: boolean + description: Makes data signal active low. + + brcm,serial-shift-inv: + type: boolean + description: Inverts Serial LEDs shift direction. + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + +patternProperties: + "@[a-f0-9]+$": + type: object + + $ref: common.yaml# + + properties: + reg: + maxItems: 1 + description: LED pin number (only LEDs 0 to 23 are valid). + + active-low: + type: boolean + description: Makes LED active low. + + brcm,hardware-controlled: + type: boolean + description: Makes this LED hardware controlled. + + brcm,link-signal-sources: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 4 + description: > + An array of hardware link signal sources. Up to four link hardware + signals can get muxed into these LEDs. Only valid for LEDs 0 to 7, + where LED signals 0 to 3 may be muxed to LEDs 0 to 3, and signals 4 to + 7 may be muxed to LEDs 4 to 7. A signal can be muxed to more than one + LED, and one LED can have more than one source signal. + + brcm,activity-signal-sources: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 4 + description: > + An array of hardware activity signal sources. Up to four activity + hardware signals can get muxed into these LEDs. Only valid for LEDs 0 + to 7, where LED signals 0 to 3 may be muxed to LEDs 0 to 3, and + signals 4 to 7 may be muxed to LEDs 4 to 7. A signal can be muxed to + more than one LED, and one LED can have more than one source signal. + + required: + - reg + + unevaluatedProperties: false + +required: + - reg + - "#address-cells" + - "#size-cells" + +additionalProperties: false + +examples: + - | + /* BCM6328 with 4 EPHY LEDs */ + led-controller@10000800 { + compatible = "brcm,bcm6328-leds"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x10000800 0x24>; + + alarm_red@2 { + reg = <2>; + active-low; + label = "red:alarm"; + }; + + inet_green@3 { + reg = <3>; + active-low; + label = "green:inet"; + }; + + power_green@4 { + reg = <4>; + active-low; + label = "green:power"; + default-state = "on"; + }; + + ephy0_spd@17 { + reg = <17>; + brcm,hardware-controlled; + }; + + ephy1_spd@18 { + reg = <18>; + brcm,hardware-controlled; + }; + + ephy2_spd@19 { + reg = <19>; + brcm,hardware-controlled; + }; + + ephy3_spd@20 { + reg = <20>; + brcm,hardware-controlled; + }; + }; + - | + /* BCM63268 with Serial/GPHY0 LEDs */ + led-controller@10001900 { + compatible = "brcm,bcm6328-leds"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x10001900 0x24>; + brcm,serial-leds; + brcm,serial-dat-low; + brcm,serial-shift-inv; + + gphy0_spd0@0 { + reg = <0>; + brcm,hardware-controlled; + brcm,link-signal-sources = <0>; + }; + + gphy0_spd1@1 { + reg = <1>; + brcm,hardware-controlled; + brcm,link-signal-sources = <1>; + }; + + inet_red@2 { + reg = <2>; + active-low; + label = "red:inet"; + }; + + dsl_green@3 { + reg = <3>; + active-low; + label = "green:dsl"; + }; + + usb_green@4 { + reg = <4>; + active-low; + label = "green:usb"; + }; + + wps_green@7 { + reg = <7>; + active-low; + label = "green:wps"; + }; + + inet_green@8 { + reg = <8>; + active-low; + label = "green:inet"; + }; + + ephy0_act@9 { + reg = <9>; + brcm,hardware-controlled; + }; + + ephy1_act@10 { + reg = <10>; + brcm,hardware-controlled; + }; + + ephy2_act@11 { + reg = <11>; + brcm,hardware-controlled; + }; + + gphy0_act@12 { + reg = <12>; + brcm,hardware-controlled; + }; + + ephy0_spd@13 { + reg = <13>; + brcm,hardware-controlled; + }; + + ephy1_spd@14 { + reg = <14>; + brcm,hardware-controlled; + }; + + ephy2_spd@15 { + reg = <15>; + brcm,hardware-controlled; + }; + + power_green@20 { + reg = <20>; + active-low; + label = "green:power"; + default-state = "on"; + }; + }; + - | + /* BCM6362 with 1 LED for each EPHY */ + led-controller@10001900 { + compatible = "brcm,bcm6328-leds"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x10001900 0x24>; + + usb@0 { + reg = <0>; + brcm,hardware-controlled; + brcm,link-signal-sources = <0>; + brcm,activity-signal-sources = <0>; + /* USB link/activity routed to USB LED */ + }; + + inet@1 { + reg = <1>; + brcm,hardware-controlled; + brcm,activity-signal-sources = <1>; + /* INET activity routed to INET LED */ + }; + + ephy0@4 { + reg = <4>; + brcm,hardware-controlled; + brcm,link-signal-sources = <4>; + /* EPHY0 link routed to EPHY0 LED */ + }; + + ephy1@5 { + reg = <5>; + brcm,hardware-controlled; + brcm,link-signal-sources = <5>; + /* EPHY1 link routed to EPHY1 LED */ + }; + + ephy2@6 { + reg = <6>; + brcm,hardware-controlled; + brcm,link-signal-sources = <6>; + /* EPHY2 link routed to EPHY2 LED */ + }; + + ephy3@7 { + reg = <7>; + brcm,hardware-controlled; + brcm,link-signal-sources = <7>; + /* EPHY3 link routed to EPHY3 LED */ + }; + + power_green@20 { + reg = <20>; + active-low; + label = "green:power"; + default-state = "on"; + }; + }; + - | + /* BCM6362 with 1 LED for all EPHYs */ + led-controller@10001900 { + compatible = "brcm,bcm6328-leds"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x10001900 0x24>; + + usb@0 { + reg = <0>; + brcm,hardware-controlled; + brcm,link-signal-sources = <0 1>; + brcm,activity-signal-sources = <0 1>; + /* USB/INET link/activity routed to USB LED */ + }; + + ephy@4 { + reg = <4>; + brcm,hardware-controlled; + brcm,link-signal-sources = <4 5 6 7>; + /* EPHY0/1/2/3 link routed to EPHY0 LED */ + }; + + power_green@20 { + reg = <20>; + active-low; + label = "green:power"; + default-state = "on"; + }; + }; + - | + /* BCM6362 with EPHY LEDs swapped */ + led-controller@10001900 { + compatible = "brcm,bcm6328-leds"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x10001900 0x24>; + + usb@0 { + reg = <0>; + brcm,hardware-controlled; + brcm,link-signal-sources = <0>; + brcm,activity-signal-sources = <0 1>; + /* USB link/act and INET act routed to USB LED */ + }; + + ephy0@4 { + reg = <4>; + brcm,hardware-controlled; + brcm,link-signal-sources = <7>; + /* EPHY3 link routed to EPHY0 LED */ + }; + + ephy1@5 { + reg = <5>; + brcm,hardware-controlled; + brcm,link-signal-sources = <6>; + /* EPHY2 link routed to EPHY1 LED */ + }; + + ephy2@6 { + reg = <6>; + brcm,hardware-controlled; + brcm,link-signal-sources = <5>; + /* EPHY1 link routed to EPHY2 LED */ + }; + + ephy3@7 { + reg = <7>; + brcm,hardware-controlled; + brcm,link-signal-sources = <4>; + /* EPHY0 link routed to EPHY3 LED */ + }; + + power_green@20 { + reg = <20>; + active-low; + label = "green:power"; + default-state = "on"; + }; + }; -- 2.31.1