Linux-LEDs Archive on lore.kernel.org
 help / color / Atom feed
From: Jacek Anaszewski <jacek.anaszewski@gmail.com>
To: Dan Murphy <dmurphy@ti.com>, pavel@ucw.cz
Cc: linux-leds@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v12 04/16] leds: multicolor: Introduce a multicolor class definition
Date: Fri, 11 Oct 2019 21:53:20 +0200
Message-ID: <651f42b4-a15c-d9ae-9a83-0a0567d61230@gmail.com> (raw)
In-Reply-To: <20191011130657.4713-5-dmurphy@ti.com>

Dan,

On 10/11/19 3:06 PM, Dan Murphy wrote:
> Introduce a multicolor class that groups colored LEDs
> within a LED node.
> 
> The multi color class groups monochrome LEDs and allows controlling two
> aspects of the final combined color: hue and lightness. The former is
> controlled via <color>_intensity files and the latter is controlled
> via brightness file.
> 
> Signed-off-by: Dan Murphy <dmurphy@ti.com>
> ---
>  .../ABI/testing/sysfs-class-led-multicolor    |  36 +++
>  .../bindings/leds/leds-class-multicolor.txt   |   4 +-
>  Documentation/leds/index.rst                  |   1 +
>  Documentation/leds/leds-class-multicolor.rst  |  96 +++++++
>  drivers/leds/Kconfig                          |  10 +
>  drivers/leds/Makefile                         |   1 +
>  drivers/leds/led-class-multicolor.c           | 271 ++++++++++++++++++
>  include/linux/led-class-multicolor.h          | 143 +++++++++
>  8 files changed, 560 insertions(+), 2 deletions(-)
>  create mode 100644 Documentation/ABI/testing/sysfs-class-led-multicolor
>  create mode 100644 Documentation/leds/leds-class-multicolor.rst
>  create mode 100644 drivers/leds/led-class-multicolor.c
>  create mode 100644 include/linux/led-class-multicolor.h
> 
> diff --git a/Documentation/ABI/testing/sysfs-class-led-multicolor b/Documentation/ABI/testing/sysfs-class-led-multicolor
> new file mode 100644
> index 000000000000..3d1f9d726c70
> --- /dev/null
> +++ b/Documentation/ABI/testing/sysfs-class-led-multicolor
> @@ -0,0 +1,36 @@
> +What:		/sys/class/leds/<led>/brightness
> +Date:		Sept 2019
> +KernelVersion:	5.5
> +Contact:	Dan Murphy <dmurphy@ti.com>
> +Description:	read/write
> +		Writing to this file will update all LEDs within the group to a
> +		calculated percentage of what each color LED intensity is set
> +		to. The percentage is calculated for each grouped LED via the
> +		equation below:
> +
> +		led_brightness = brightness * <color>_intensity/<color>_max_intensity
> +
> +		For additional details please refer to
> +		Documentation/leds/leds-class-multicolor.rst.
> +
> +		The value of the color is from 0 to
> +		/sys/class/leds/<led>/max_brightness.
> +
> +What:		/sys/class/leds/<led>/colors/<color>_intensity
> +Date:		Sept 2019
> +KernelVersion:	5.5
> +Contact:	Dan Murphy <dmurphy@ti.com>
> +Description:	read/write
> +		The <color>_intensity file is created based on the color
> +		defined by the registrar of the class.
> +		There is one file per color presented.
> +
> +		The value of the color is from 0 to
> +		/sys/class/leds/<led>/colors/<color>_max_intensity.
> +
> +What:		/sys/class/leds/<led>/colors/<color>_max_intensity
> +Date:		Sept 2019
> +KernelVersion:	5.5
> +Contact:	Dan Murphy <dmurphy@ti.com>
> +Description:	read only
> +		Maximum intensity level for the LED color.
> diff --git a/Documentation/devicetree/bindings/leds/leds-class-multicolor.txt b/Documentation/devicetree/bindings/leds/leds-class-multicolor.txt
> index 8619c9bf1811..4b1bd82f2a42 100644
> --- a/Documentation/devicetree/bindings/leds/leds-class-multicolor.txt
> +++ b/Documentation/devicetree/bindings/leds/leds-class-multicolor.txt
> @@ -10,7 +10,7 @@ The nodes and properties defined in this document are unique to the multicolor
>  LED class.  Common LED nodes and properties are inherited from the common.txt
>  within this documentation directory.
>  
> -Required LED Child properties:
> +Required LED child properties:
>  	- color : For multicolor LED support this property should be defined as
>  		  LED_COLOR_ID_MULTI and further definition can be found in
>  		  include/linux/leds/common.h.
> @@ -26,7 +26,7 @@ led-controller@30 {
>  		#size-cells = <0>;
>  		reg = <1>;
>  		color = <LED_COLOR_ID_MULTI>;
> -		function = LED_FUNCTION_STATUS;
> +		function = LED_FUNCTION_CHARGING;
>  

So this went to wrong patch.

-- 
Best regards,
Jacek Anaszewski

  reply index

Thread overview: 31+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-11 13:06 [PATCH v12 00/16] Multicolor Framework v12 Dan Murphy
2019-10-11 13:06 ` [PATCH v12 01/16] dt: bindings: Add multicolor class dt bindings documention Dan Murphy
2019-10-11 13:06 ` [PATCH v12 02/16] dt-bindings: leds: Add multicolor ID to the color ID list Dan Murphy
2019-10-11 13:06 ` [PATCH v12 03/16] " Dan Murphy
2019-10-11 13:06 ` [PATCH v12 04/16] leds: multicolor: Introduce a multicolor class definition Dan Murphy
2019-10-11 19:53   ` Jacek Anaszewski [this message]
2019-10-14  6:18   ` kbuild test robot
2019-10-11 13:06 ` [PATCH v12 05/16] dt: bindings: lp50xx: Introduce the lp50xx family of RGB drivers Dan Murphy
2019-10-11 13:06 ` [PATCH v12 06/16] leds: lp50xx: Add the LP50XX family of the RGB LED driver Dan Murphy
2019-10-11 20:04   ` Jacek Anaszewski
2019-10-14  9:17   ` kbuild test robot
2019-10-19 17:13     ` Jacek Anaszewski
2019-10-21 11:46       ` Dan Murphy
2019-10-11 13:06 ` [PATCH v12 07/16] dt: bindings: lp55xx: Be consistent in the document with LED acronym Dan Murphy
2019-10-11 13:06 ` [PATCH v12 08/16] dt: bindings: lp55xx: Update binding for Multicolor Framework Dan Murphy
2019-10-11 20:15   ` Jacek Anaszewski
2019-10-12  0:54     ` Dan Murphy
2019-10-12 13:32       ` Jacek Anaszewski
2019-10-11 13:06 ` [PATCH v12 09/16] ARM: dts: n900: Add reg property to the LP5523 channel node Dan Murphy
2019-10-11 13:06 ` [PATCH v12 10/16] ARM: dts: imx6dl-yapp4: Add reg property to the lp5562 " Dan Murphy
2019-10-11 13:06 ` [PATCH v12 11/16] ARM: dts: ste-href: Add reg property to the LP5521 channel nodes Dan Murphy
2019-10-11 13:06 ` [PATCH v12 12/16] leds: lp55xx: Add multicolor framework support to lp55xx Dan Murphy
2019-10-11 20:36   ` Jacek Anaszewski
2019-10-12  0:50     ` Dan Murphy
2019-10-12 13:27       ` Jacek Anaszewski
2019-10-11 13:06 ` [PATCH v12 13/16] leds: lp5523: Update the lp5523 code to add intensity function Dan Murphy
2019-10-11 13:06 ` [PATCH v12 14/16] leds: lp5521: Add multicolor framework intensity support Dan Murphy
2019-10-11 13:06 ` [PATCH v12 15/16] leds: lp55xx: Fix checkpatch file permissions issues Dan Murphy
2019-10-11 13:06 ` [PATCH v12 16/16] leds: lp5523: Fix checkpatch issues in the code Dan Murphy
2019-10-11 19:40 ` [PATCH v12 00/16] Multicolor Framework v12 Jacek Anaszewski
2019-10-12  0:48   ` Dan Murphy

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=651f42b4-a15c-d9ae-9a83-0a0567d61230@gmail.com \
    --to=jacek.anaszewski@gmail.com \
    --cc=dmurphy@ti.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-leds@vger.kernel.org \
    --cc=pavel@ucw.cz \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-LEDs Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-leds/0 linux-leds/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-leds linux-leds/ https://lore.kernel.org/linux-leds \
		linux-leds@vger.kernel.org
	public-inbox-index linux-leds

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-leds


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git