From: Hans de Goede <hdegoede@redhat.com>
To: Henning Schild <henning.schild@siemens.com>,
Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
Linux LED Subsystem <linux-leds@vger.kernel.org>,
Platform Driver <platform-driver-x86@vger.kernel.org>,
linux-watchdog@vger.kernel.org,
Srikanth Krishnakar <skrishnakar@gmail.com>,
Jan Kiszka <jan.kiszka@siemens.com>,
Gerd Haeussler <gerd.haeussler.ext@siemens.com>,
Guenter Roeck <linux@roeck-us.net>,
Wim Van Sebroeck <wim@linux-watchdog.org>,
Mark Gross <mgross@linux.intel.com>, Pavel Machek <pavel@ucw.cz>
Subject: Re: [PATCH v2 1/4] platform/x86: simatic-ipc: add main driver for Siemens devices
Date: Wed, 17 Mar 2021 21:03:07 +0100 [thread overview]
Message-ID: <92080a68-9029-3103-9240-65c92d17bf16@redhat.com> (raw)
In-Reply-To: <20210317201311.70528fd4@md1za8fc.ad001.siemens.net>
Hi,
On 3/17/21 8:13 PM, Henning Schild wrote:
> Am Mon, 15 Mar 2021 12:31:11 +0200
> schrieb Andy Shevchenko <andy.shevchenko@gmail.com>:
>
>> On Mon, Mar 15, 2021 at 12:02 PM Henning Schild
>> <henning.schild@siemens.com> wrote:
>>>
>>> This mainly implements detection of these devices and will allow
>>> secondary drivers to work on such machines.
>>>
>>> The identification is DMI-based with a vendor specific way to tell
>>> them apart in a reliable way.
>>>
>>> Drivers for LEDs and Watchdogs will follow to make use of that
>>> platform detection.
>>
>> ...
>>
>>> +static int register_platform_devices(u32 station_id)
>>> +{
>>> + u8 ledmode = SIMATIC_IPC_DEVICE_NONE;
>>> + u8 wdtmode = SIMATIC_IPC_DEVICE_NONE;
>>> + int i;
>>> +
>>> + platform_data.devmode = SIMATIC_IPC_DEVICE_NONE;
>>> +
>>> + for (i = 0; i < ARRAY_SIZE(device_modes); i++) {
>>> + if (device_modes[i].station_id == station_id) {
>>> + ledmode = device_modes[i].led_mode;
>>> + wdtmode = device_modes[i].wdt_mode;
>>> + break;
>>> + }
>>> + }
>>> +
>>> + if (ledmode != SIMATIC_IPC_DEVICE_NONE) {
>>> + platform_data.devmode = ledmode;
>>> + ipc_led_platform_device =
>>> + platform_device_register_data(NULL,
>>> + KBUILD_MODNAME "_leds",
>>> PLATFORM_DEVID_NONE,
>>> + &platform_data,
>>> + sizeof(struct
>>> simatic_ipc_platform));
>>> + if (IS_ERR(ipc_led_platform_device))
>>> + return PTR_ERR(ipc_led_platform_device);
>>> +
>>> + pr_debug("device=%s created\n",
>>> + ipc_led_platform_device->name);
>>> + }
>>> +
>>> + if (wdtmode != SIMATIC_IPC_DEVICE_NONE) {
>>> + platform_data.devmode = wdtmode;
>>> + ipc_wdt_platform_device =
>>> + platform_device_register_data(NULL,
>>> + KBUILD_MODNAME "_wdt",
>>> PLATFORM_DEVID_NONE,
>>> + &platform_data,
>>> + sizeof(struct
>>> simatic_ipc_platform));
>>> + if (IS_ERR(ipc_wdt_platform_device))
>>> + return PTR_ERR(ipc_wdt_platform_device);
>>> +
>>> + pr_debug("device=%s created\n",
>>> + ipc_wdt_platform_device->name);
>>> + }
>>> +
>>> + if (ledmode == SIMATIC_IPC_DEVICE_NONE &&
>>> + wdtmode == SIMATIC_IPC_DEVICE_NONE) {
>>> + pr_warn("unsupported IPC detected, station
>>> id=%08x\n",
>>> + station_id);
>>> + return -EINVAL;
>>> + }
>>> +
>>> + return 0;
>>> +}
>>
>> Why not use MFD here?
>
> Never had a close look at mfd to be honest. I might
>
> With the custom dmi matching on 129 being part of the header, and the
> p2sb unhide moving out as well ... that first driver ends up being not
> too valuable indeed
>
> It just identifies the box and tells subsequent drivers which one it
> is, which watchdog and LED path to take. Moving the knowledge of which
> box has which LED/watchdog into the respective drivers seems to be the
> better way to go.
>
> So we would end up with a LED and a watchdog driver both
> MODULE_ALIAS("dmi:*:svnSIEMENSAG:*");
> and doing the identification with the inline dmi from that header,
> doing p2sb with the support to come ... possibly a "//TODO\ninline" in
> the meantime.
>
> So no "main platform" driver anymore, but still central platform
> headers.
>
> Not sure how this sounds, but i think making that change should be
> possible. And that is what i will try and go for in v3.
Dropping the main drivers/platform/x86 driver sounds good to me,
I was already wondering a bit about its function since it just
instantiates devs to which the other ones bind to then instantiate
more devs (in the LED case).
Regards,
Hans
>> ...
>>
>>> +/*
>>> + * Get membase address from PCI, used in leds and wdt modul. Here
>>> we read
>>> + * the bar0. The final address calculation is done in the
>>> appropriate modules
>>> + */
>>
>> No blank line here.
>>
>> I would add FIXME or REVISIT here to point out that this should be
>> deduplicated in the future.
>>
>>> +u32 simatic_ipc_get_membase0(unsigned int p2sb)
>>> +{
>>> + struct pci_bus *bus;
>>> + u32 bar0 = 0;
>>> +
>>> + /*
>>> + * The GPIO memory is bar0 of the hidden P2SB device.
>>> Unhide the device
>>
>> No, it's not a GPIO's bar. It's P2SB's one. GPIO resides in that bar
>> somewhere.
>>
>>> + * to have a quick look at it, before we hide it again.
>>> + * Also grab the pci rescan lock so that device does not
>>> get discovered
>>> + * and remapped while it is visible.
>>> + * This code is inspired by drivers/mfd/lpc_ich.c
>>> + */
>>> + bus = pci_find_bus(0, 0);
>>> + pci_lock_rescan_remove();
>>> + pci_bus_write_config_byte(bus, p2sb, 0xE1, 0x0);
>>> + pci_bus_read_config_dword(bus, p2sb, PCI_BASE_ADDRESS_0,
>>> &bar0); +
>>> + bar0 &= ~0xf;
>>> + pci_bus_write_config_byte(bus, p2sb, 0xE1, 0x1);
>>> + pci_unlock_rescan_remove();
>>> +
>>> + return bar0;
>>> +}
>>> +EXPORT_SYMBOL(simatic_ipc_get_membase0);
>>
>> ...
>>
>>> +static inline u32 simatic_ipc_get_station_id(u8 *data, int max_len)
>>> +{
>>> + u32 station_id = SIMATIC_IPC_INVALID_STATION_ID;
>>> + int i;
>>
>> Reversed xmas tree order, please.
>>
>>> + struct {
>>> + u8 type; /* type (0xff = binary) */
>>> + u8 len; /* len of data entry */
>>> + u8 reserved[3];
>>> + u32 station_id; /* station id (LE) */
>>
>>> + } __packed
>>> + *data_entry = (void *)data + sizeof(struct dmi_header);
>>
>> Can be one line.
>>
>>> + /* find 4th entry in OEM data */
>>> + for (i = 0; i < 3; i++)
>>
>> 3 is magic!
>>
>>> + data_entry = (void *)((u8 *)(data_entry) +
>>> data_entry->len); +
>>> + /* decode station id */
>>> + if (data_entry && (u8 *)data_entry < data + max_len &&
>>> + data_entry->type == 0xff && data_entry->len == 9)
>>> + station_id = le32_to_cpu(data_entry->station_id);
>>> +
>>> + return station_id;
>>> +}
>>
>
next prev parent reply other threads:[~2021-03-17 20:04 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-15 9:57 [PATCH v2 0/4] add device drivers for Siemens Industrial PCs Henning Schild
2021-03-15 9:57 ` [PATCH v2 1/4] platform/x86: simatic-ipc: add main driver for Siemens devices Henning Schild
2021-03-15 10:31 ` Andy Shevchenko
2021-03-15 16:30 ` Henning Schild
2021-03-17 19:13 ` Henning Schild
2021-03-17 20:03 ` Hans de Goede [this message]
2021-03-18 11:30 ` Enrico Weigelt, metux IT consult
2021-03-18 11:45 ` Hans de Goede
2021-03-26 9:55 ` Henning Schild
2021-03-26 12:21 ` Hans de Goede
2021-03-15 9:57 ` [PATCH v2 2/4] leds: simatic-ipc-leds: add new driver for Siemens Industial PCs Henning Schild
2021-03-15 10:48 ` Andy Shevchenko
2021-03-15 11:19 ` Pavel Machek
2021-03-15 11:26 ` Andy Shevchenko
2021-03-15 12:40 ` Henning Schild
2021-03-18 11:38 ` Enrico Weigelt, metux IT consult
2021-03-27 9:46 ` Henning Schild
2021-04-01 16:20 ` Enrico Weigelt, metux IT consult
2021-03-27 9:56 ` Henning Schild
2021-03-18 10:27 ` Enrico Weigelt, metux IT consult
2021-03-18 12:40 ` Alexander Dahl
2021-03-23 17:45 ` Henning Schild
2021-03-26 16:33 ` Henning Schild
2021-03-18 10:25 ` Enrico Weigelt, metux IT consult
2021-03-27 11:16 ` Henning Schild
2021-03-27 11:41 ` Henning Schild
2021-03-15 9:57 ` [PATCH v2 3/4] watchdog: simatic-ipc-wdt: add new driver for Siemens Industrial PCs Henning Schild
2021-03-15 15:10 ` Guenter Roeck
2021-03-29 16:28 ` Henning Schild
2021-03-15 9:57 ` [PATCH v2 4/4] platform/x86: pmc_atom: improve critclk_systems matching for Siemens PCs Henning Schild
2021-03-15 10:14 ` Henning Schild
2021-03-15 10:19 ` Hans de Goede
2021-03-15 12:09 ` Henning Schild
2021-03-15 14:58 ` [PATCH] platform/x86: pmc_atom: use callback for all dmi quirk entries Henning Schild
2021-03-15 16:31 ` Hans de Goede
2021-03-15 17:00 ` Henning Schild
2021-03-15 18:01 ` Hans de Goede
2021-03-16 5:47 ` Henning Schild
2021-03-16 9:43 ` Hans de Goede
2021-03-15 13:25 ` [PATCH v2 4/4] platform/x86: pmc_atom: improve critclk_systems matching for Siemens PCs kernel test robot
2021-03-15 10:55 ` [PATCH v2 0/4] add device drivers for Siemens Industrial PCs Andy Shevchenko
2021-03-15 16:08 ` Henning Schild
2021-08-02 9:21 ` Henning Schild
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=92080a68-9029-3103-9240-65c92d17bf16@redhat.com \
--to=hdegoede@redhat.com \
--cc=andy.shevchenko@gmail.com \
--cc=gerd.haeussler.ext@siemens.com \
--cc=henning.schild@siemens.com \
--cc=jan.kiszka@siemens.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-leds@vger.kernel.org \
--cc=linux-watchdog@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=mgross@linux.intel.com \
--cc=pavel@ucw.cz \
--cc=platform-driver-x86@vger.kernel.org \
--cc=skrishnakar@gmail.com \
--cc=wim@linux-watchdog.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).