linux-lvm.redhat.com archive mirror
 help / color / mirror / Atom feed
* [linux-lvm] unable to exclude LVs using global_filter
@ 2018-01-02  6:47 Gordon Messmer
  2018-01-02 11:03 ` Marian Csontos
  0 siblings, 1 reply; 10+ messages in thread
From: Gordon Messmer @ 2018-01-02  6:47 UTC (permalink / raw)
  To: linux-lvm

I'd like to avoid scanning LVs, and I thought I'd set global_filter 
appropriately.  The following logs show global_filter set to reject 
^/dev/VolGroup/vm_, but the system is scanning 
/dev/VolGroup/vm_wiki_data.  Any hints as to what I'm doing wrong?



Dec 06 13:08:37 kvm-test.private lvm[532]: Setting devices/global_filter 
to global_filter = [ "r|^/dev/VolGroup/vm_|", "r|^/dev/dm-|", "a|.*/|" ]
Dec 06 13:08:37 kvm-test.private lvm[534]: Setting devices/global_filter 
to global_filter = [ "r|^/dev/VolGroup/vm_|", "r|^/dev/dm-|", "a|.*/|" ]
Dec 06 13:08:38 kvm-test.private lvm[543]: Setting devices/global_filter 
to global_filter = [ "r|^/dev/VolGroup/vm_|", "r|^/dev/dm-|", "a|.*/|" ]
Dec 06 13:08:40 kvm-test.private lvm[648]: Setting devices/global_filter 
to global_filter = [ "r|^/dev/VolGroup/vm_|", "r|^/dev/dm-|", "a|.*/|" ]
Dec 06 13:08:40 kvm-test.private lvm[648]: Setting devices/filter to 
filter = [ "r|^/dev/VolGroup/vm_|", "r|^/dev/dm-|", "a|.*/|" ]
Dec 06 13:08:42 kvm-test.private lvm[751]: Setting devices/global_filter 
to global_filter = [ "r|^/dev/VolGroup/vm_|", "r|^/dev/dm-|", "a|.*/|" ]
Dec 06 13:08:42 kvm-test.private lvm[751]: Setting devices/filter to 
filter = [ "r|^/dev/VolGroup/vm_|", "r|^/dev/dm-|", "a|.*/|" ]
Dec 06 13:08:44 kvm-test.private lvm[785]: Setting devices/global_filter 
to global_filter = [ "r|^/dev/VolGroup/vm_|", "r|^/dev/dm-|", "a|.*/|" ]
Dec 06 13:08:44 kvm-test.private lvm[785]: Setting devices/filter to 
filter = [ "r|^/dev/VolGroup/vm_|", "r|^/dev/dm-|", "a|.*/|" ]
Dec 06 13:08:44 kvm-test.private lvm[785]: Opened 
/dev/VolGroup/vm_wiki_data RO O_DIRECT
Dec 06 13:08:44 kvm-test.private lvm[785]: /dev/VolGroup/vm_wiki_data: 
size is 10485760 sectors
Dec 06 13:08:44 kvm-test.private lvm[785]: Closed /dev/VolGroup/vm_wiki_data
Dec 06 13:08:44 kvm-test.private lvm[785]: Opened 
/dev/VolGroup/vm_wiki_data RO O_DIRECT
Dec 06 13:08:44 kvm-test.private lvm[785]: /dev/VolGroup/vm_wiki_data: 
block size is 4096 bytes
Dec 06 13:08:44 kvm-test.private lvm[785]: /dev/VolGroup/vm_wiki_data: 
physical block size is 512 bytes
Dec 06 13:08:44 kvm-test.private lvm[785]: Closed /dev/VolGroup/vm_wiki_data
Dec 06 13:08:44 kvm-test.private lvm[785]: /dev/VolGroup/vm_wiki_data: 
using cached size 10485760 sectors
Dec 06 13:08:44 kvm-test.private lvm[785]: Opened 
/dev/VolGroup/vm_wiki_data RO O_DIRECT
Dec 06 13:08:44 kvm-test.private lvm[785]: /dev/VolGroup/vm_wiki_data: 
block size is 4096 bytes
Dec 06 13:08:44 kvm-test.private lvm[785]: /dev/VolGroup/vm_wiki_data: 
physical block size is 512 bytes
Dec 06 13:08:44 kvm-test.private lvm[785]: Closed /dev/VolGroup/vm_wiki_data
Dec 06 13:08:44 kvm-test.private lvm[785]: Scanning dev 253:3 for 
lvmetad cache.
Dec 06 13:08:44 kvm-test.private lvm[785]: Reading label from device 
/dev/VolGroup/vm_wiki_data
Dec 06 13:08:44 kvm-test.private lvm[785]: Opened 
/dev/VolGroup/vm_wiki_data RO O_DIRECT
Dec 06 13:08:44 kvm-test.private lvm[785]: /dev/VolGroup/vm_wiki_data: 
block size is 4096 bytes
Dec 06 13:08:44 kvm-test.private lvm[785]: /dev/VolGroup/vm_wiki_data: 
physical block size is 512 bytes
Dec 06 13:08:44 kvm-test.private lvm[785]: /dev/VolGroup/vm_wiki_data: 
lvm2 label detected at sector 1
Dec 06 13:08:44 kvm-test.private lvm[785]: lvmcache 
/dev/VolGroup/vm_wiki_data: now in VG #orphans_lvm2 (#orphans_lvm2) with 
0 mda(s).
Dec 06 13:08:44 kvm-test.private lvm[785]: /dev/VolGroup/vm_wiki_data: 
PV header extension version 2 found
Dec 06 13:08:44 kvm-test.private lvm[785]: /dev/VolGroup/vm_wiki_data: 
Found metadata at 8704 size 1086 (in area at 4096 size 1044480) for 
DataGroup (ZY69boAqK0Cz6TYGHdevNQfQ2O1sbJoG)
Dec 06 13:08:44 kvm-test.private lvm[785]: lvmcache has no info for 
vgname "DataGroup" with VGID ZY69boAqK0Cz6TYGHdevNQfQ2O1sbJoG.
Dec 06 13:08:44 kvm-test.private lvm[785]: lvmcache has no info for 
vgname "DataGroup".
Dec 06 13:08:44 kvm-test.private lvm[785]: lvmcache 
/dev/VolGroup/vm_wiki_data: now in VG DataGroup with 1 mda(s).
Dec 06 13:08:44 kvm-test.private lvm[785]: lvmcache 
/dev/VolGroup/vm_wiki_data: VG DataGroup: set VGID to 
ZY69boAqK0Cz6TYGHdevNQfQ2O1sbJoG.
Dec 06 13:08:44 kvm-test.private lvm[785]: lvmcache 
/dev/VolGroup/vm_wiki_data: VG DataGroup: set creation host to 
localhost.localdomain.
Dec 06 13:08:44 kvm-test.private lvm[785]: lvmcache 
/dev/VolGroup/vm_wiki_data: VG DataGroup: stored metadata checksum 
0xf5731900 with size 1086.
Dec 06 13:08:44 kvm-test.private lvm[785]: Closed /dev/VolGroup/vm_wiki_data
Dec 06 13:08:44 kvm-test.private lvm[785]: Opened 
/dev/VolGroup/vm_wiki_data RO O_DIRECT
Dec 06 13:08:44 kvm-test.private lvm[785]: /dev/VolGroup/vm_wiki_data: 
block size is 4096 bytes
Dec 06 13:08:44 kvm-test.private lvm[785]: /dev/VolGroup/vm_wiki_data: 
physical block size is 512 bytes
Dec 06 13:08:44 kvm-test.private lvm[785]: Allocated VG DataGroup at 
0x560c70fc8bb0.
Dec 06 13:08:44 kvm-test.private lvm[785]: Importing logical volume 
DataGroup/data.
Dec 06 13:08:44 kvm-test.private lvm[785]: Read DataGroup metadata (4) 
from /dev/VolGroup/vm_wiki_data at 8704 size 1086
Dec 06 13:08:44 kvm-test.private lvm[785]: Closed /dev/VolGroup/vm_wiki_data
Dec 06 13:08:44 kvm-test.private lvm[785]: Opened 
/dev/VolGroup/vm_wiki_data RO O_DIRECT
Dec 06 13:08:44 kvm-test.private lvm[785]: /dev/VolGroup/vm_wiki_data: 
block size is 4096 bytes
Dec 06 13:08:44 kvm-test.private lvm[785]: /dev/VolGroup/vm_wiki_data: 
physical block size is 512 bytes
Dec 06 13:08:44 kvm-test.private lvm[785]: Closed /dev/VolGroup/vm_wiki_data
Dec 06 13:08:44 kvm-test.private lvm[785]: Telling lvmetad to store PV 
/dev/VolGroup/vm_wiki_data (NRKTXX-I9D8-Vxb1-hKcX-rjJX-GNhB-jgsXiW) in 
VG DataGroup
Dec 06 13:08:44 kvm-test.private lvm[785]: Setting response to OK
Dec 06 13:08:44 kvm-test.private lvm[785]: Setting response to OK
Dec 06 13:08:44 kvm-test.private lvm[785]: Setting response to OK
Dec 06 13:08:44 kvm-test.private lvm[785]: Setting seqno_after to 4
Dec 06 13:08:44 kvm-test.private lvm[785]: Setting seqno_after to 4
Dec 06 13:08:44 kvm-test.private lvm[785]: Setting seqno_before to 4
Dec 06 13:08:44 kvm-test.private lvm[785]: Setting status to complete
Dec 06 13:08:44 kvm-test.private lvm[785]: Setting vgname to DataGroup
Dec 06 13:08:44 kvm-test.private lvm[785]: Setting changed to 1
Dec 06 13:08:44 kvm-test.private lvm[785]: VG DataGroup is complete in 
lvmetad with dev /dev/VolGroup/vm_wiki_data.
Dec 06 13:08:44 kvm-test.private lvm[785]: VG DataGroup is changed in 
lvmetad.
Dec 06 13:08:44 kvm-test.private lvm[785]: Freeing VG DataGroup at 
0x560c70fc8bb0.

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [linux-lvm] unable to exclude LVs using global_filter
  2018-01-02  6:47 [linux-lvm] unable to exclude LVs using global_filter Gordon Messmer
@ 2018-01-02 11:03 ` Marian Csontos
  2018-01-02 15:35   ` Gordon Messmer
  0 siblings, 1 reply; 10+ messages in thread
From: Marian Csontos @ 2018-01-02 11:03 UTC (permalink / raw)
  To: LVM general discussion and development, Gordon Messmer

On 01/02/2018 07:47 AM, Gordon Messmer wrote:
> I'd like to avoid scanning LVs, and I thought I'd set global_filter 
> appropriately.  The following logs show global_filter set to reject 
> ^/dev/VolGroup/vm_, but the system is scanning 
> /dev/VolGroup/vm_wiki_data.  Any hints as to what I'm doing wrong?
> 
> 
> 
> Dec 06 13:08:37 kvm-test.private lvm[532]: Setting devices/global_filter 
> to global_filter = [ "r|^/dev/VolGroup/vm_|", "r|^/dev/dm-|", "a|.*/|" ]

Hi Gordon, remove the last component in the filter: 'a|.*/|'.

Filters accept any device if any of it's "names" (all symbolic links) is 
matched by an a pattern ("a|.*/|" in your case) and matches no previous 
r pattern - for example anything in /dev/mapper/ is accepted.

When used as a blacklist filter(s) must contain only "r" paterns.

BTW it is usually better to use white list: list "a" patterns for all 
disks you wish to accept and add "r|.*|" at the end.

-- Martian

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [linux-lvm] unable to exclude LVs using global_filter
  2018-01-02 11:03 ` Marian Csontos
@ 2018-01-02 15:35   ` Gordon Messmer
  2018-01-02 18:17     ` Marian Csontos
  0 siblings, 1 reply; 10+ messages in thread
From: Gordon Messmer @ 2018-01-02 15:35 UTC (permalink / raw)
  To: Marian Csontos, LVM general discussion and development

[-- Attachment #1: Type: text/plain, Size: 929 bytes --]

On 01/02/2018 03:03 AM, Marian Csontos wrote:
> Filters accept any device if any of it's "names" (all symbolic links) 
> is matched by an a pattern ("a|.*/|" in your case) and matches no 
> previous r pattern

I don't follow you.  The name being processed in that log *does* match a 
previous r pattern.

> for example anything in /dev/mapper/ is accepted. 


Yes, I'd considered that might be an issue, but that's not the block 
device name that the logs indicate is being used.  A path that I've 
specifically rejected is being processed.  If a second path to the block 
device might be processed, then I can see the need to make additional 
changes, but I can't solve that problem without understanding the basic 
logic of the filter system.

The documentation in lvm.conf says "The first regex in the list to match 
the path is used, producing the 'a' or 'r' result for the device." but 
that doesn't seem to be correct.


[-- Attachment #2: Type: text/html, Size: 1619 bytes --]

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [linux-lvm] unable to exclude LVs using global_filter
  2018-01-02 15:35   ` Gordon Messmer
@ 2018-01-02 18:17     ` Marian Csontos
  2018-01-02 18:43       ` Alasdair G Kergon
  2018-01-02 18:58       ` Gordon Messmer
  0 siblings, 2 replies; 10+ messages in thread
From: Marian Csontos @ 2018-01-02 18:17 UTC (permalink / raw)
  To: LVM general discussion and development, Gordon Messmer

On 01/02/2018 04:35 PM, Gordon Messmer wrote:
> On 01/02/2018 03:03 AM, Marian Csontos wrote:
>> Filters accept any device if any of it's "names" (all symbolic links) 
>> is matched by an a pattern ("a|.*/|" in your case) and matches no 
>> previous r pattern
> 
> I don't follow you.  The name being processed in that log *does* match a 
> previous r pattern.
I do not think that log shows what is processed. LVM displays device 
names according to different option - preferred_names it is.

If lvmetad is in use, which by default it is, run `pvscan -vvvv --cache 
$DEV_MAJOR:$DEV_MINOR` - that should be more helpful WRT which devices 
are scanned and accepted as Physical Volumes.

> 
>> for example anything in /dev/mapper/ is accepted. 

^ THIS! In your case the /dev/mapper/vm_* link IS accepted by the 
"a|.*/|" in global_filter. And /dev/disk/by-*/* too. And maybe others...

> 
> 
> Yes, I'd considered that might be an issue, but that's not the block 
> device name that the logs indicate is being used.  A path that I've 
> specifically rejected is being processed.  If a second path to the block 
> device might be processed, then I can see the need to make additional 
> changes, but I can't solve that problem without understanding the basic 
> logic of the filter system.
> 
> The documentation in lvm.conf says "The first regex in the list to match 
> the path is used, producing the 'a' or 'r' result for the device." but 
> that doesn't seem to be correct.

IMHO the documentation is confusing if not straight incorrect. I hate 
that and IMHO we should fix how the filtering works, but that would be 
an incompatible change, and those are not loved. :-(

How it actually works is: if ANY path is accepted, the device is. In 
upstream the lvm.conf also says (emphasis mine):

"When multiple path names exist for a block device, if *any path* name 
matches an 'a' pattern before an 'r' pattern, then the device is 
accepted. If all the path names match an 'r' pattern first, then the 
device is rejected."

May be we should replace the "device" in the last sentence by "path" so 
it would say:

"The first regex in the list to match the path is used, producing the 
'a' or 'r' result for *that path*."

And:

"When multiple path names exist for a block device"

could be safely discarded - as it is true most of if not all the time 
(or replaced by "Keep in mind devices nowadays are linked from many 
places in the /dev tree, and")

So we would have the following:

"If any path name matches an 'a' pattern before an 'r' pattern, then the 
device is accepted."

I am not a native speaker, but to me that is consistent with current 
behavior which is unlikely to change. I will send a patch to see if it 
is opposed by anyone...

-- Martian


> 
> 
> 
> 
> _______________________________________________
> linux-lvm mailing list
> linux-lvm@redhat.com
> https://www.redhat.com/mailman/listinfo/linux-lvm
> read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
> 

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [linux-lvm] unable to exclude LVs using global_filter
  2018-01-02 18:17     ` Marian Csontos
@ 2018-01-02 18:43       ` Alasdair G Kergon
  2018-01-02 18:47         ` Alasdair G Kergon
  2018-01-02 19:16         ` Gordon Messmer
  2018-01-02 18:58       ` Gordon Messmer
  1 sibling, 2 replies; 10+ messages in thread
From: Alasdair G Kergon @ 2018-01-02 18:43 UTC (permalink / raw)
  To: LVM general discussion and development

The key concept to grasp is that LVM works with devices (i.e. major
number + minor number pairs) rather than filesystem paths and it makes a
single "use or ignore" decision for each device (not for each path).

One device might be reachable through more than one filesystem path that
lvm has been configured to check and, if so, all the paths are checked
against the filter independently and the results feed into that single
decision according to the rules described.

Alasdair

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [linux-lvm] unable to exclude LVs using global_filter
  2018-01-02 18:43       ` Alasdair G Kergon
@ 2018-01-02 18:47         ` Alasdair G Kergon
  2018-01-02 19:16         ` Gordon Messmer
  1 sibling, 0 replies; 10+ messages in thread
From: Alasdair G Kergon @ 2018-01-02 18:47 UTC (permalink / raw)
  To: LVM general discussion and development

Also there is no special handling for |.*| - a match against it gets treated as
a positive deliberate match, just the same way as a match against |/dev/sda2|.

Alasdair

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [linux-lvm] unable to exclude LVs using global_filter
  2018-01-02 18:17     ` Marian Csontos
  2018-01-02 18:43       ` Alasdair G Kergon
@ 2018-01-02 18:58       ` Gordon Messmer
  1 sibling, 0 replies; 10+ messages in thread
From: Gordon Messmer @ 2018-01-02 18:58 UTC (permalink / raw)
  To: Marian Csontos, LVM general discussion and development

On 01/02/2018 10:17 AM, Marian Csontos wrote:
> I do not think that log shows what is processed. LVM displays device 
> names according to different option - preferred_names it is.

I see.  It seems to me that, for the purpose of troubleshooting filter 
processing, the literal path that matches a filter option should be logged.

> If lvmetad is in use, which by default it is, run `pvscan -vvvv 
> --cache $DEV_MAJOR:$DEV_MINOR` - that should be more helpful WRT which 
> devices are scanned and accepted as Physical Volumes.

I see the following in the ouptut:

#device/dev-cache.c:356         /dev/dm-3: Added to device cache (253:3)
#device/dev-cache.c:352         /dev/VolGroup/vm_wiki_data: Aliased to 
/dev/dm-3 in device cache (preferred name) (253:3)
#device/dev-cache.c:352 /dev/disk/by-id/dm-name-VolGroup-vm_wiki_data: 
Aliased to /dev/VolGroup/vm_wiki_data in device cache (253:3)
#device/dev-cache.c:352 
/dev/disk/by-id/dm-uuid-LVM-LaE2AjV9UKn6sAhmbduHGzY0TsRtfr9fwKOoFpMNpYX98umwKoXfH0qQb2MG7bCx: 
Aliased to /dev/VolGroup/vm_wiki_data in device cache (253:3)
#device/dev-cache.c:352 
/dev/disk/by-id/lvm-pv-uuid-NRKTXX-I9D8-Vxb1-hKcX-rjJX-GNhB-jgsXiW: 
Aliased to /dev/VolGroup/vm_wiki_data in device cache (253:3)
#device/dev-cache.c:352         /dev/mapper/VolGroup-vm_wiki_data: 
Aliased to /dev/VolGroup/vm_wiki_data in device cache (253:3)

...understanding that all of those paths are filtered individually was 
the bit I was missing.

> IMHO the documentation is confusing if not straight incorrect. I hate 
> that and IMHO we should fix how the filtering works, but that would be 
> an incompatible change, and those are not loved. :-(
>
> How it actually works is: if ANY path is accepted, the device is. In 
> upstream the lvm.conf also says (emphasis mine):
>
> "When multiple path names exist for a block device, if *any path* name 
> matches an 'a' pattern before an 'r' pattern, then the device is 
> accepted. If all the path names match an 'r' pattern first, then the 
> device is rejected."

The description of filtering is... maybe a touch long, and that specific 
bit is very important and easy to miss.  It might be more clear to move 
that statement to a paragraph of its own.

Alternatively, if devices are accepted when no pattern matches, maybe 
emptying the default filter would be a better approach.  That way the 
default configuration would accept all devices.  If someone introduces 
an r filter, it will actually work as expected.  It's nearly impossible 
to effectively blacklist a device if the default "a" filter is retained, 
and it doesn't appear to serve a function if the system accepts block 
devices that match no path.

> May be we should replace the "device" in the last sentence by "path" 
> so it would say:
>
> "The first regex in the list to match the path is used, producing the 
> 'a' or 'r' result for *that path*."

I'm not sure that really conveys the bit that I, personally, missed, 
which is that in order to reject a device, you must reject all of the 
paths by which it is referenced.  If the default "a" filter is retained, 
then you'd probably want to be clear about that, and possibly describe 
at least one way to get a list of all of the paths that lead to a given 
block device.

Thanks for the help understanding the filter system.  I'll work with 
this a bit and come back if my understanding is still incorrect.

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [linux-lvm] unable to exclude LVs using global_filter
  2018-01-02 18:43       ` Alasdair G Kergon
  2018-01-02 18:47         ` Alasdair G Kergon
@ 2018-01-02 19:16         ` Gordon Messmer
  2018-01-03 21:18           ` Gordon Messmer
  1 sibling, 1 reply; 10+ messages in thread
From: Gordon Messmer @ 2018-01-02 19:16 UTC (permalink / raw)
  To: LVM general discussion and development

On 01/02/2018 10:43 AM, Alasdair G Kergon wrote:
> The key concept to grasp is that LVM works with devices (i.e. major
> number + minor number pairs) rather than filesystem paths and it makes a
> single "use or ignore" decision for each device (not for each path).


That seems even more misleading than the original documentation, since 
the filters are applied to each path, and not to the device.

I understand what you mean, now, but I don't think that explaining the 
system that way is likely to help users understand.

I'll send a patch later which might be more clear.  Should I send it to 
this list?  Martian (or Marian?  Signature didn't match the From header 
on an earlier message) said that they'd also send a patch, but I'm not 
sure where it will be sent.

BTW, simply removing the "a" filter solved my problem.  My vm_*_data LVs 
are no longer processed, but the md device that backs the primary VG is, 
so everything works as I expect it to. Thanks, again.

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [linux-lvm] unable to exclude LVs using global_filter
  2018-01-02 19:16         ` Gordon Messmer
@ 2018-01-03 21:18           ` Gordon Messmer
  2018-01-11  4:51             ` Gordon Messmer
  0 siblings, 1 reply; 10+ messages in thread
From: Gordon Messmer @ 2018-01-03 21:18 UTC (permalink / raw)
  To: LVM general discussion and development

On 01/02/2018 11:16 AM, Gordon Messmer wrote:
> I'll send a patch later which might be more clear.


Submitted for consideration:


diff --git a/conf/example.conf.in b/conf/example.conf.in
index aab274d74..2aed631e5 100644
--- a/conf/example.conf.in
+++ b/conf/example.conf.in
@@ -114,16 +114,20 @@ devices {
         # device path names. Each regex is delimited by a vertical bar '|'
         # (or any character) and is preceded by 'a' to accept the path, or
         # by 'r' to reject the path. The first regex in the list to 
match the
-       # path is used, producing the 'a' or 'r' result for the device.
-       # When multiple path names exist for a block device, if any path 
name
-       # matches an 'a' pattern before an 'r' pattern, then the device is
-       # accepted. If all the path names match an 'r' pattern first, 
then the
-       # device is rejected. Unmatching path names do not affect the accept
-       # or reject decision. If no path names for a device match a pattern,
-       # then the device is accepted. Be careful mixing 'a' and 'r' 
patterns,
-       # as the combination might produce unexpected results (test 
changes.)
-       # Run vgscan after changing the filter to regenerate the cache.
-       # See the use_lvmetad comment for a special case regarding filters.
+       # path is used, producing the 'a' or 'r' result for the path.
+       #
+       # Typically, multiple paths will exist for a block device.  If 
any path
+       # to a block device is accepted by the filter list, the block device
+       # will be processed.  If no path is accepted, and at least one is
+       # rejected, the block device will not be processed.  If no path 
matches
+       # any entry in the filter list, the block device will be processed.
+       #
+       # Be careful mixing 'a' and 'r' patterns, as the combination might
+       # produce unexpected results (test changes.)  It may be best to 
use only
+       # 'r' patterns if your goal is to prevent processing specific block
+       # devices.  Run vgscan after changing the filter to regenerate the
+       # cache.  See the use_lvmetad comment for a special case regarding
+       # filters.
         #
         # Example
         # Accept every block device:

^ permalink raw reply related	[flat|nested] 10+ messages in thread

* Re: [linux-lvm] unable to exclude LVs using global_filter
  2018-01-03 21:18           ` Gordon Messmer
@ 2018-01-11  4:51             ` Gordon Messmer
  0 siblings, 0 replies; 10+ messages in thread
From: Gordon Messmer @ 2018-01-11  4:51 UTC (permalink / raw)
  To: LVM general discussion and development

On 01/03/2018 01:18 PM, Gordon Messmer wrote:
> Submitted for consideration: 


Did anyone have any comments on this patch?  Martian said they'd try to 
reword the documentation, but I don't see any recent changes in git...

^ permalink raw reply	[flat|nested] 10+ messages in thread

end of thread, other threads:[~2018-01-11  4:51 UTC | newest]

Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-01-02  6:47 [linux-lvm] unable to exclude LVs using global_filter Gordon Messmer
2018-01-02 11:03 ` Marian Csontos
2018-01-02 15:35   ` Gordon Messmer
2018-01-02 18:17     ` Marian Csontos
2018-01-02 18:43       ` Alasdair G Kergon
2018-01-02 18:47         ` Alasdair G Kergon
2018-01-02 19:16         ` Gordon Messmer
2018-01-03 21:18           ` Gordon Messmer
2018-01-11  4:51             ` Gordon Messmer
2018-01-02 18:58       ` Gordon Messmer

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).