From: "Gang He" <ghe@suse.com>
To: linux-lvm@redhat.com, lvm-devel@redhat.com
Subject: [linux-lvm] Can't work normally after attaching disk volumes originally in a VG on another machine
Date: Fri, 23 Mar 2018 02:30:05 -0600 [thread overview]
Message-ID: <5AB52B8D020000F9000B14B9@prv-mh.provo.novell.com> (raw)
Hello List,
Since I am new to LVM area, but I got a problem about LVM can't work normally after attaching disk volumes originally in a VG on another machine.
Then, I sent this problem to the list, to see if we can get a fix or there has been a fix.
The problem is very easy to reproduce,
1) create two virtual machines(tb0307-nd1, tb0307-nd2), create two virtual disks.
2) attach two virtual disks to VM1(tb0307-nd1).
tb0307-nd1:/# lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sr0 11:0 1 4.3G 0 rom
vda 254:0 0 40G 0 disk
├─vda1 254:1 0 4G 0 part [SWAP]
├─vda2 254:2 0 23.6G 0 part /
└─vda3 254:3 0 12.4G 0 part /home
vdb 254:16 0 40G 0 disk
vdc 254:32 0 20G 0 disk <<= disk1
vdd 254:48 0 20G 0 disk <<= disk2
3) pvcreate two virtual disks, and add them to vg1.
tb0307-nd1:/# pvcreate /dev/vdc
Physical volume "/dev/vdc" successfully created.
tb0307-nd1:/# pvcreate /dev/vdd
Physical volume "/dev/vdd" successfully created.
tb0307-nd1:/# pvs
PV VG Fmt Attr PSize PFree
/dev/vdc lvm2 --- 20.00g 20.00g
/dev/vdd lvm2 --- 20.00g 20.00g
tb0307-nd1:/# vgcreate vg1 /dev/vdc /dev/vdd
4) disconnect two virtual disks from VM1, and attach disk1 to VM2(tb0307-nd2).
5) delete vg1, create vg2, and add disk1 to vg2.
tb0307-nd2:~ # pvs
WARNING: Device for PV t6gjHU-dtY4-th5O-A0mr-5OEC-R1ZK-TPQgIh not found or rejected by a filter.
PV VG Fmt Attr PSize PFree
/dev/vdc vg1 lvm2 a-- 20.00g 20.00g
[unknown] vg1 lvm2 a-m 20.00g 20.00g
tb0307-nd2:~ # pvremove /dev/vdc
WARNING: Device for PV t6gjHU-dtY4-th5O-A0mr-5OEC-R1ZK-TPQgIh not found or rejected by a filter.
PV /dev/vdc is used by VG vg1 so please use vgreduce first.
(If you are certain you need pvremove, then confirm by using --force twice.)
/dev/vdc: physical volume label not removed.
tb0307-nd2:~ # vgreduce --removemissing vg1
WARNING: Device for PV t6gjHU-dtY4-th5O-A0mr-5OEC-R1ZK-TPQgIh not found or rejected by a filter.
Wrote out consistent volume group vg1.
tb0307-nd2:~ # pvs
PV VG Fmt Attr PSize PFree
/dev/vdc vg1 lvm2 a-- 20.00g 20.00g
tb0307-nd2:~ # vgremove vg1
Volume group "vg1" successfully removed
tb0307-nd2:~ # vgcreate vg2 /dev/vdc
Volume group "vg2" successfully created
tb0307-nd2:~ # vgs
VG #PV #LV #SN Attr VSize VFree
vg2 1 0 0 wz--n- 20.00g 20.00g
tb0307-nd2:~ # pvs
PV VG Fmt Attr PSize PFree
/dev/vdc vg2 lvm2 a-- 20.00g 20.00g
6) attach disk2 to VM2(tb0307-nd2), the vg on VM2 looks abnormal.
tb0307-nd2:~ # pvs
WARNING: Device for PV JJOL4H-kc0j-jyTD-LDwl-71FZ-dHKM-YoFtNV not found or rejected by a filter.
PV VG Fmt Attr PSize PFree
/dev/vdc vg2 lvm2 a-- 20.00g 20.00g
/dev/vdd vg1 lvm2 a-- 20.00g 20.00g
[unknown] vg1 lvm2 a-m 20.00g 20.00g
tb0307-nd2:~ # vgs
WARNING: Device for PV JJOL4H-kc0j-jyTD-LDwl-71FZ-dHKM-YoFtNV not found or rejected by a filter.
VG #PV #LV #SN Attr VSize VFree
vg1 2 0 0 wz-pn- 39.99g 39.99g
vg2 1 0 0 wz--n- 20.00g 20.00g
7) reboot VM2, the result looks worse (vdc disk belongs to two vg).
tb0307-nd2:/mnt/shared # pvs
PV VG Fmt Attr PSize PFree
/dev/vdc vg1 lvm2 a-- 20.00g 0
/dev/vdc vg2 lvm2 a-- 20.00g 10.00g
/dev/vdd vg1 lvm2 a-- 20.00g 9.99g
It looks like LVM2 meta consistency problem? please help to take a look.
Thanks
Gang
next reply other threads:[~2018-03-23 8:30 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-23 8:30 Gang He [this message]
2018-03-23 9:04 ` [linux-lvm] Can't work normally after attaching disk volumes originally in a VG on another machine Xen
2018-03-26 6:04 ` Gang He
2018-03-26 10:17 ` Fran Garcia
2018-03-26 10:23 ` Fran Garcia
2018-03-27 5:55 ` Gang He
2018-03-27 8:32 ` Zdenek Kabelac
2018-03-28 2:09 ` Gang He
2018-03-27 9:12 ` Xen
2018-03-27 10:22 ` Zdenek Kabelac
2018-03-27 10:27 ` Xen
2018-03-27 22:17 ` Zdenek Kabelac
2018-03-28 10:08 ` Xen
2018-03-26 10:46 ` Zdenek Kabelac
2018-05-18 4:56 ` Gang He
2018-03-26 11:33 ` Xen
2018-10-16 20:59 ` [linux-lvm] [lvm-devel] " Nir Soffer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5AB52B8D020000F9000B14B9@prv-mh.provo.novell.com \
--to=ghe@suse.com \
--cc=linux-lvm@redhat.com \
--cc=lvm-devel@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).