RE: Re: [linux-lvm] LVM 0.8 and reiser filesystem

RE: Re: [linux-lvm] LVM 0.8 and reiser filesystem

[holger_zecha]

[-- Attachment #1: BDY.RTF --]
[-- Type: text/plain, Size: 1348 bytes --]

Hello,

the idea is the same as in HP-UX.
When we are using Linux, it would be good, to get as close to HP-UX as
possible.
We're now using LVM in HP-UX to mirror the Volume groupe vg00

/dev/vg00/lvol4     307200   73329  219390   25% /
--- Logical volumes ---
LV Name                     /dev/vg00/lvol4
VG Name                     /dev/vg00
LV Permission               read/write
LV Status                   available/syncd
Mirror copies               1
Consistency Recovery        MWC
Schedule                    parallel
LV Size (Mbytes)            300
Current LE                  75
Allocated PE                150
Stripes                     0
Stripe Size (Kbytes)        0
Bad block                   off
Allocation                  strict/contiguous
IO Timeout (Seconds)        default

We know, that it is possible to implement RAID 1 in other ways, but it's
difficult to support.

 -----Original Message-----
From:       hopper@omnifarious.mn.org [mailto:hopper@omnifarious.mn.org]
             
Sent:       Dienstag, 6. Juni 2000 19:34
To:         HOLGER ZECHA /HP-Germany,om17
Cc:         hopper@omnifarious.mn.org; linux-lvm@msede.com
Subject:    Re: [linux-lvm] LVM 0.8 and reiser filesystem

 << File: Re_ [linux-lvm] LVM 0.TXT >>  << File: Re_ [linux-lvm] LVM
0.TXT >>  << File: Untitled1 >>  

[-- Attachment #2: BDY.RTF --]
[-- Type: application/rtf, Size: 1820 bytes --]