linux-m68k.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Finn Thain <fthain@telegraphics.com.au>
To: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Joshua Thompson <funaho@jurai.org>,
	Geert Uytterhoeven <geert@linux-m68k.org>,
	linux-m68k@lists.linux-m68k.org,
	Laurent Vivier <lvivier@redhat.com>,
	Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>,
	linuxppc-dev@lists.ozlabs.org, linux-kernel@vger.kernel.org
Subject: [PATCH 4/9] macintosh/via-macii: Remove read_done state
Date: Sun, 28 Jun 2020 14:23:12 +1000	[thread overview]
Message-ID: <0253194363af4426f9788796811a6a29fb87c713.1593318192.git.fthain@telegraphics.com.au> (raw)
In-Reply-To: <cover.1593318192.git.fthain@telegraphics.com.au>

The driver state machine may enter the 'read_done' state when leaving the
'idle' or 'reading' state. This transition is pointless, as is the extra
interrupt it requires. The interrupt is produced by the transceiver
(even when it has no data to send) because an extra EVEN/ODD toggle
was signalled by the driver. Drop the extra state to simplify the code.

Fixes: 1da177e4c3f41 ("Linux-2.6.12-rc2") # v5.0+
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
---
 drivers/macintosh/via-macii.c | 70 ++++++++++++++---------------------
 1 file changed, 28 insertions(+), 42 deletions(-)

diff --git a/drivers/macintosh/via-macii.c b/drivers/macintosh/via-macii.c
index 6a5cd7de05baf..d29c87943ca46 100644
--- a/drivers/macintosh/via-macii.c
+++ b/drivers/macintosh/via-macii.c
@@ -110,7 +110,6 @@ static enum macii_state {
 	idle,
 	sending,
 	reading,
-	read_done,
 } macii_state;
 
 static struct adb_request *current_req; /* first request struct in the queue */
@@ -411,8 +410,8 @@ static irqreturn_t macii_interrupt(int irq, void *arg)
 			reply_len = 1;
 		} else {
 			/* bus timeout */
-			macii_state = read_done;
 			reply_len = 0;
+			break;
 		}
 
 		/* set ADB state = even for first data byte */
@@ -471,20 +470,6 @@ static irqreturn_t macii_interrupt(int irq, void *arg)
 				current_req = req->next;
 				if (req->done)
 					(*req->done)(req);
-
-				if (!current_req)
-					macii_queue_poll();
-
-				if (current_req && macii_state == idle)
-					macii_start();
-
-				if (macii_state == idle) {
-					/* reset to shift in */
-					via[ACR] &= ~SR_OUT;
-					x = via[SR];
-					/* set ADB state idle - might get SRQ */
-					via[B] = (via[B] & ~ST_MASK) | ST_IDLE;
-				}
 				break;
 			}
 		} else {
@@ -511,12 +496,28 @@ static irqreturn_t macii_interrupt(int irq, void *arg)
 			} else if (status == ST_ODD && reply_len == 2) {
 				srq_asserted = true;
 			} else {
-				macii_state = read_done;
+				macii_state = idle;
+
+				if (bus_timeout)
+					reply_len = 0;
+
+				if (reading_reply) {
+					struct adb_request *req = current_req;
+
+					req->reply_len = reply_len;
+
+					req->complete = 1;
+					current_req = req->next;
+					if (req->done)
+						(*req->done)(req);
+				} else if (reply_len && autopoll_devs) {
+					adb_input(reply_buf, reply_len, 0);
+				}
+				break;
 			}
 		}
 
-		if (macii_state == reading &&
-		    reply_len < ARRAY_SIZE(reply_buf)) {
+		if (reply_len < ARRAY_SIZE(reply_buf)) {
 			reply_ptr++;
 			*reply_ptr = x;
 			reply_len++;
@@ -526,37 +527,22 @@ static irqreturn_t macii_interrupt(int irq, void *arg)
 		via[B] ^= ST_MASK;
 		break;
 
-	case read_done:
-		x = via[SR];
-
-		if (bus_timeout)
-			reply_len = 0;
-
-		if (reading_reply) {
-			reading_reply = 0;
-			req = current_req;
-			req->reply_len = reply_len;
-			req->complete = 1;
-			current_req = req->next;
-			if (req->done)
-				(*req->done)(req);
-		} else if (reply_len && autopoll_devs)
-			adb_input(reply_buf, reply_len, 0);
-
-		macii_state = idle;
+	default:
+		break;
+	}
 
+	if (macii_state == idle) {
 		if (!current_req)
 			macii_queue_poll();
 
 		if (current_req)
 			macii_start();
 
-		if (macii_state == idle)
+		if (macii_state == idle) {
+			via[ACR] &= ~SR_OUT;
+			x = via[SR];
 			via[B] = (via[B] & ~ST_MASK) | ST_IDLE;
-		break;
-
-	default:
-		break;
+		}
 	}
 
 	local_irq_restore(flags);
-- 
2.26.2


  parent reply	other threads:[~2020-06-28  4:32 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-28  4:23 [PATCH 0/9] Macintosh II ADB driver fixes Finn Thain
2020-06-28  4:23 ` [PATCH 2/9] macintosh/via-macii: Poll the device most likely to respond Finn Thain
2020-08-09 18:55   ` Guenter Roeck
2020-08-09 22:58     ` Finn Thain
2020-08-10  1:16       ` Guenter Roeck
2020-06-28  4:23 ` [PATCH 7/9] macintosh/via-macii: Use unsigned type for autopoll_devs variable Finn Thain
2020-06-28  4:23 ` [PATCH 6/9] macintosh/via-macii: Use bool type for reading_reply variable Finn Thain
2020-06-28  4:23 ` [PATCH 1/9] macintosh/via-macii: Access autopoll_devs when inside lock Finn Thain
2020-08-09 19:01   ` Guenter Roeck
2020-08-09 23:15     ` Finn Thain
2020-06-28  4:23 ` [PATCH 9/9] macintosh/via-macii: Clarify definition of macii_init() Finn Thain
2020-06-28  4:23 ` [PATCH 5/9] macintosh/via-macii: Handle poll replies correctly Finn Thain
2020-06-28  4:23 ` Finn Thain [this message]
2020-06-28  4:23 ` [PATCH 3/9] macintosh/via-macii: Handle /CTLR_IRQ signal correctly Finn Thain
2020-06-28  4:23 ` [PATCH 8/9] macintosh/via-macii: Use the stack for reset request storage Finn Thain
2020-07-27  7:26 ` [PATCH 0/9] Macintosh II ADB driver fixes Michael Ellerman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=0253194363af4426f9788796811a6a29fb87c713.1593318192.git.fthain@telegraphics.com.au \
    --to=fthain@telegraphics.com.au \
    --cc=benh@kernel.crashing.org \
    --cc=funaho@jurai.org \
    --cc=geert@linux-m68k.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-m68k@lists.linux-m68k.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=lvivier@redhat.com \
    --cc=mark.cave-ayland@ilande.co.uk \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).