From: Michael Schmitz <schmitzmic@gmail.com>
To: netdev@vger.kernel.org
Cc: andrew@lunn.ch, fthain@telegraphics.com.au, geert@linux-m68k.org,
f.fainelli@gmail.com, linux-m68k@vger.kernel.org,
Michael.Karcher@fu-berlin.de,
Michael Karcher <kernel@mkarcher.dialup.fu-berlin.de>,
Michael Schmitz <schmitzmic@gmail.com>
Subject: [PATCH v4 5/9] net-next: ax88796: Add block_input/output hooks to ax_plat_data
Date: Thu, 19 Apr 2018 14:05:22 +1200 [thread overview]
Message-ID: <1524103526-12240-6-git-send-email-schmitzmic@gmail.com> (raw)
In-Reply-To: <1524025616-3722-1-git-send-email-schmitzmic@gmail.com>
From: Michael Karcher <kernel@mkarcher.dialup.fu-berlin.de>
Add platform specific hooks for block transfer reads/writes of packet
buffer data, superseding the default provided ax_block_input/output.
Currently used for m68k Amiga XSurf100.
Signed-off-by: Michael Karcher <kernel@mkarcher.dialup.fu-berlin.de>
Signed-off-by: Michael Schmitz <schmitzmic@gmail.com>
---
Changes in v3:
Suggested by Andrew Lunn/Finn Thain:
- declare struct sk_buff in ax88796.h
- correct whitespace error in ax88796.h
---
drivers/net/ethernet/8390/ax88796.c | 10 ++++++++--
include/net/ax88796.h | 9 +++++++++
2 files changed, 17 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/8390/ax88796.c b/drivers/net/ethernet/8390/ax88796.c
index d3f30f1..939a572 100644
--- a/drivers/net/ethernet/8390/ax88796.c
+++ b/drivers/net/ethernet/8390/ax88796.c
@@ -758,8 +758,14 @@ static int ax_init_dev(struct net_device *dev)
#endif
ei_local->reset_8390 = &ax_reset_8390;
- ei_local->block_input = &ax_block_input;
- ei_local->block_output = &ax_block_output;
+ if (ax->plat->block_input)
+ ei_local->block_input = ax->plat->block_input;
+ else
+ ei_local->block_input = &ax_block_input;
+ if (ax->plat->block_output)
+ ei_local->block_output = ax->plat->block_output;
+ else
+ ei_local->block_output = &ax_block_output;
ei_local->get_8390_hdr = &ax_get_8390_hdr;
ei_local->priv = 0;
diff --git a/include/net/ax88796.h b/include/net/ax88796.h
index b9a3bec..363b0ca 100644
--- a/include/net/ax88796.h
+++ b/include/net/ax88796.h
@@ -12,6 +12,9 @@
#ifndef __NET_AX88796_PLAT_H
#define __NET_AX88796_PLAT_H
+struct sk_buff;
+struct net_device;
+
#define AXFLG_HAS_EEPROM (1<<0)
#define AXFLG_MAC_FROMDEV (1<<1) /* device already has MAC */
#define AXFLG_HAS_93CX6 (1<<2) /* use eeprom_93cx6 driver */
@@ -26,6 +29,12 @@ struct ax_plat_data {
u32 *reg_offsets; /* register offsets */
u8 *mac_addr; /* MAC addr (only used when
AXFLG_MAC_FROMPLATFORM is used */
+
+ /* uses default ax88796 buffer if set to NULL */
+ void (*block_output)(struct net_device *dev, int count,
+ const unsigned char *buf, int star_page);
+ void (*block_input)(struct net_device *dev, int count,
+ struct sk_buff *skb, int ring_offset);
};
#endif /* __NET_AX88796_PLAT_H */
--
1.7.0.4
next prev parent reply other threads:[~2018-04-19 2:05 UTC|newest]
Thread overview: 109+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-04-16 22:04 [PATCH 00/10] New network driver for Amiga X-Surf 100 (m68k) Michael Schmitz
2018-04-16 22:04 ` [PATCH 01/10] net: ax88796: Fix MAC address reading Michael Schmitz
2018-04-16 22:04 ` [PATCH 02/10] net: ax88796: Attach MII bus only when open Michael Schmitz
2018-04-16 22:59 ` Andrew Lunn
2018-04-16 23:53 ` Michael Schmitz
2018-04-16 22:04 ` [PATCH 03/10] net: ax88796: Do not free IRQ in ax_remove() (already freed in ax_close()) Michael Schmitz
2018-04-17 9:15 ` Sergei Shtylyov
2018-04-16 22:04 ` [PATCH 04/10] net: ax88796: Add block_input/output hooks to ax_plat_data Michael Schmitz
2018-04-17 18:46 ` kbuild test robot
2018-04-18 0:53 ` Michael Schmitz
2018-04-18 1:19 ` Andrew Lunn
2018-04-18 3:39 ` Michael Schmitz
2018-04-18 1:23 ` Finn Thain
2018-04-18 3:46 ` Michael Schmitz
2018-04-16 22:04 ` [PATCH 05/10] net: ax88796: add interrupt status callback to platform data Michael Schmitz
2018-04-16 22:04 ` [PATCH 06/10] net: ax88796: set IRQF_SHARED flag when IRQ resource is marked as shareable Michael Schmitz
2018-04-16 22:04 ` [PATCH 07/10] net: ax88796: unregister mdiobus on ax_mii_init() fail Michael Schmitz
2018-04-16 22:04 ` [PATCH 08/10] net: ax88796: Make reset more robust on AX88796B Michael Schmitz
2018-04-16 23:12 ` Andrew Lunn
2018-04-17 0:14 ` Michael Schmitz
2018-04-17 1:32 ` Andrew Lunn
2018-04-17 5:18 ` Michael Karcher
2018-04-17 13:01 ` Andrew Lunn
2018-04-17 18:08 ` Florian Fainelli
2018-04-17 19:25 ` Michael Schmitz
2018-04-16 22:04 ` [PATCH 09/10] net: ax88796: release platform device drvdata on probe error and module remove Michael Schmitz
2018-04-16 22:04 ` [PATCH 10/10] net: New ax88796 platform driver for Amiga X-Surf 100 Zorro board (m68k) Michael Schmitz
2018-04-17 13:53 ` Geert Uytterhoeven
2018-04-17 22:35 ` Michael Schmitz
2018-04-18 7:54 ` Geert Uytterhoeven
2018-04-18 4:32 ` Michael Schmitz
2018-04-17 2:08 ` [PATCH v2 0/8] New network driver for Amiga X-Surf 100 (m68k) Michael Schmitz
2018-04-18 4:26 ` [PATCH v3 00/10] " Michael Schmitz
2018-04-18 5:10 ` Michael Schmitz
2018-04-18 5:45 ` Finn Thain
2018-04-18 21:26 ` Michael Schmitz
2018-04-18 12:19 ` Andrew Lunn
2018-04-18 21:34 ` Michael Schmitz
2018-04-19 2:05 ` [PATCH v4 " Michael Schmitz
2018-04-19 3:17 ` Michael Schmitz
2018-04-19 20:11 ` David Miller
2018-04-19 21:36 ` Michael Schmitz
2018-04-19 2:05 ` [PATCH v4 1/9] net-next: phy: new Asix Electronics PHY driver Michael Schmitz
2018-04-19 12:21 ` Andrew Lunn
2018-04-19 16:15 ` Florian Fainelli
2019-01-18 10:22 ` [v4,1/9] " Thomas Gleixner
2019-01-20 17:43 ` Andrew Lunn
2019-01-20 22:44 ` Michael Schmitz
2018-04-19 2:05 ` [PATCH v4 2/9] net-next: ax88796: Fix MAC address reading Michael Schmitz
2018-04-19 2:05 ` [PATCH v4 3/9] net-next: ax88796: Attach MII bus only when open Michael Schmitz
2018-04-19 2:05 ` [PATCH v4 4/9] net-next: ax88796: Do not free IRQ in ax_remove() (already freed in ax_close()) Michael Schmitz
2018-04-19 2:05 ` Michael Schmitz [this message]
2018-04-19 2:05 ` [PATCH v4 6/9] net-next: ax88796: add interrupt status callback to platform data Michael Schmitz
2018-04-19 2:05 ` [PATCH v4 7/9] net-next: ax88796: set IRQF_SHARED flag when IRQ resource is marked as shareable Michael Schmitz
2018-04-19 2:05 ` [PATCH v4 8/9] net-next: ax88796: release platform device drvdata on probe error and module remove Michael Schmitz
2018-04-19 2:05 ` [PATCH v4 9/9] net-next: New ax88796 platform driver for Amiga X-Surf 100 Zorro board (m68k) Michael Schmitz
2018-06-07 14:36 ` Geert Uytterhoeven
2018-06-08 7:31 ` Michael Schmitz
2018-06-08 9:28 ` Michael Karcher
2018-06-09 0:28 ` Michael Schmitz
2018-06-09 9:15 ` Michael Karcher
2018-06-09 20:09 ` Michael Schmitz
2018-06-09 5:57 ` [RFC PATCH 0/2] net-next: cleanup use of lib8390.c code in xsurf100.c Michael Schmitz
2018-06-09 5:57 ` [RFC PATCH 1/2] net-next: ax88796: export ax_NS8390_init() hook Michael Schmitz
2018-06-09 14:31 ` Geert Uytterhoeven
2018-06-09 5:57 ` [RFC PATCH 2/2] net-next: xsurf100: drop include of lib8390.c Michael Schmitz
2018-06-09 14:33 ` Geert Uytterhoeven
2018-06-09 19:00 ` Michael Schmitz
2018-06-10 4:22 ` [PATCH 0/2] net-next: cleanup use of lib8390.c code in xsurf100.c Michael Schmitz
2018-06-10 4:22 ` [PATCH 1/2] net-next: ax88796: export ax_NS8390_init() hook Michael Schmitz
2018-06-10 9:34 ` Geert Uytterhoeven
2018-06-10 4:22 ` [PATCH 2/2] net-next: xsurf100: drop include of lib8390.c Michael Schmitz
2018-06-10 9:34 ` Geert Uytterhoeven
2021-05-16 9:52 ` Arnd Bergmann
2021-05-18 8:42 ` Michael Schmitz
2021-05-18 13:56 ` Arnd Bergmann
2021-05-18 20:33 ` Michael Schmitz
2018-04-18 4:26 ` [PATCH v3 1/9] net: phy: new Asix Electronics PHY driver Michael Schmitz
2018-04-18 7:04 ` John Paul Adrian Glaubitz
2018-04-18 12:13 ` Andrew Lunn
2018-04-18 22:26 ` Michael Schmitz
2018-04-18 4:26 ` [PATCH v3 2/9] net: ax88796: Fix MAC address reading Michael Schmitz
2018-04-18 4:26 ` [PATCH v3 3/9] net: ax88796: Attach MII bus only when open Michael Schmitz
2018-04-18 4:26 ` [PATCH v3 4/9] net: ax88796: Do not free IRQ in ax_remove() (already freed in ax_close()) Michael Schmitz
2018-04-18 4:26 ` [PATCH v3 5/9] net: ax88796: Add block_input/output hooks to ax_plat_data Michael Schmitz
2018-04-18 4:26 ` [PATCH v3 6/9] net: ax88796: add interrupt status callback to platform data Michael Schmitz
2018-04-18 4:26 ` [PATCH v3 7/9] net: ax88796: set IRQF_SHARED flag when IRQ resource is marked as shareable Michael Schmitz
2018-04-18 4:26 ` [PATCH v3 8/9] net: ax88796: release platform device drvdata on probe error and module remove Michael Schmitz
2018-04-18 4:26 ` [PATCH v3 9/9] net: New ax88796 platform driver for Amiga X-Surf 100 Zorro board (m68k) Michael Schmitz
2018-04-17 2:08 ` [PATCH v2 1/8] net: ax88796: Fix MAC address reading Michael Schmitz
2018-04-17 2:08 ` [PATCH v2 2/8] net: ax88796: Attach MII bus only when open Michael Schmitz
2018-04-17 13:19 ` Andrew Lunn
2018-04-17 2:08 ` [PATCH v2 3/8] net: ax88796: Do not free IRQ in ax_remove() (already freed in ax_close()) Michael Schmitz
2018-04-17 8:20 ` Geert Uytterhoeven
2018-04-17 13:51 ` David Miller
2018-04-17 20:36 ` Michael Schmitz
2018-04-17 11:40 ` John Paul Adrian Glaubitz
2018-04-17 20:32 ` Michael Schmitz
2018-04-17 20:42 ` John Paul Adrian Glaubitz
2018-04-17 21:13 ` Andrew Lunn
2018-04-17 21:53 ` Michael Schmitz
2018-04-17 2:08 ` [PATCH v2 4/8] net: ax88796: Add block_input/output hooks to ax_plat_data Michael Schmitz
2018-04-17 2:08 ` [PATCH v2 5/8] net: ax88796: add interrupt status callback to platform data Michael Schmitz
2018-04-17 2:08 ` [PATCH v2 6/8] net: ax88796: set IRQF_SHARED flag when IRQ resource is marked as shareable Michael Schmitz
2018-04-17 11:40 ` John Paul Adrian Glaubitz
2018-04-17 2:08 ` [PATCH v2 7/8] net: ax88796: release platform device drvdata on probe error and module remove Michael Schmitz
2018-04-17 2:08 ` [PATCH v2 8/8] net: New ax88796 platform driver for Amiga X-Surf 100 Zorro board (m68k) Michael Schmitz
2018-04-17 13:26 ` Andrew Lunn
2018-04-17 23:00 ` Michael Schmitz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1524103526-12240-6-git-send-email-schmitzmic@gmail.com \
--to=schmitzmic@gmail.com \
--cc=Michael.Karcher@fu-berlin.de \
--cc=andrew@lunn.ch \
--cc=f.fainelli@gmail.com \
--cc=fthain@telegraphics.com.au \
--cc=geert@linux-m68k.org \
--cc=kernel@mkarcher.dialup.fu-berlin.de \
--cc=linux-m68k@vger.kernel.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).