Linux-m68k Archive on lore.kernel.org
 help / color / Atom feed
From: Kars de Jong <jongk@linux-m68k.org>
To: "James E.J. Bottomley" <jejb@linux.ibm.com>,
	"Martin K. Petersen" <martin.petersen@oracle.com>,
	Hannes Reinecke <hare@suse.com>
Cc: linux-scsi@vger.kernel.org, linux-m68k@vger.kernel.org,
	schmitzmic@gmail.com, fthain@telegraphics.com.au,
	Kars de Jong <jongk@linux-m68k.org>
Subject: [PATCH v4 0/2] Some esp_scsi updates
Date: Tue, 19 Nov 2019 21:08:03 +0100
Message-ID: <20191119200805.28319-1-jongk@linux-m68k.org> (raw)

When trying kernel 5.4.0-rc5 on my Amiga, I experienced data transfer failures
when reading from my FAST-10 SCSI disk. I have a Blizzard 12x0 IV SCSI
controller which uses a Symbios Logic SYM53CF94-2 "FSC" chip.

This used to work with the old generic NCR53C9x driver, so I investigated the
issue.

It turned out to be caused by lacking detection of FSC silicon in the new
driver.

The second patch in this series adds support for the FSC.

When adding support for the chip, I found out the hard way that the esp_rev
enum is ordered (I just added it to the end of the enum).

Then I also discovered that the definition for the PCSCSI chip was in the
wrong place of the enum. It will probably have issues with FAST-10 SCSI
targets, because its CONFIG3 settings are wrong.

The first patch fixes this, and adds comments to the enum to hopefully prevent
this from happening again.

When discussing this on the Linux/m68k mailing list, it was suggested to
perhaps replace the dependency on ordering of the esp_rev enum by feature flags.
I did not implement this for now.

Changes since v3:
- Reduce scope of family_code variable
- Remove some redundant comments
- Explicitly show the NCR/Symbios Logic part code instead of FSC, which is
  only used in the data manual

Changes since v2:
- Fixed merge conflict in second patch

Changes since v1:
- Removed confusing comments from esp_rev enum
- Remove unneeded definitions for UID register
- Remove unneeded local uid variable

Kars de Jong (2):
  esp_scsi: Correct ordering of PCSCSI definition in esp_rev enum
  esp_scsi: Add support for FSC chip

 drivers/scsi/esp_scsi.c | 20 +++++++++++---------
 drivers/scsi/esp_scsi.h | 41 +++++++++++++++++++++++++----------------
 2 files changed, 36 insertions(+), 25 deletions(-)

-- 
2.17.1


             reply index

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-19 20:08 Kars de Jong [this message]
2019-11-19 20:08 ` [PATCH v4 1/2] esp_scsi: Correct ordering of PCSCSI definition in esp_rev enum Kars de Jong
2019-11-19 20:08 ` [PATCH v4 2/2] esp_scsi: Add support for FSC chip Kars de Jong

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191119200805.28319-1-jongk@linux-m68k.org \
    --to=jongk@linux-m68k.org \
    --cc=fthain@telegraphics.com.au \
    --cc=hare@suse.com \
    --cc=jejb@linux.ibm.com \
    --cc=linux-m68k@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=martin.petersen@oracle.com \
    --cc=schmitzmic@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-m68k Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-m68k/0 linux-m68k/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-m68k linux-m68k/ https://lore.kernel.org/linux-m68k \
		linux-m68k@vger.kernel.org linux-m68k@lists.linux-m68k.org
	public-inbox-index linux-m68k

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-m68k


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git