From: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
To: Jens Axboe <axboe@kernel.dk>
Cc: Michael Schmitz <schmitzmic@gmail.com>,
Geert Uytterhoeven <geert@linux-m68k.org>,
Christoph Hellwig <hch@lst.de>,
linux-ide@vger.kernel.org, linux-m68k@lists.linux-m68k.org,
linux-kernel@vger.kernel.org, b.zolnierkie@samsung.com
Subject: [PATCH v4 24/27] ata: move ata_sas_*() to libata-sata.c
Date: Tue, 17 Mar 2020 15:43:30 +0100 [thread overview]
Message-ID: <20200317144333.2904-25-b.zolnierkie@samsung.com> (raw)
In-Reply-To: <20200317144333.2904-1-b.zolnierkie@samsung.com>
* un-inline:
- ata_scsi_dump_cdb()
- __ata_scsi_queuecmd()
* un-static:
- ata_scsi_sdev_config()
- ata_scsi_dev_config()
- ata_scsi_dump_cdb()
- __ata_scsi_queuecmd()
* move ata_sas_*() to libata-sata.c:
* add static inlines for CONFIG_SATA_HOST=n case for
ata_sas_{allocate,free}_tag()
Code size savings on m68k arch using (modified) atari_defconfig:
text data bss dec hex filename
before:
19137 23 576 19736 4d18 drivers/ata/libata-scsi.o
after:
18330 23 576 18929 49f1 drivers/ata/libata-scsi.o
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
---
drivers/ata/libata-sata.c | 213 ++++++++++++++++++++++++++++++++++++
drivers/ata/libata-scsi.c | 222 +-------------------------------------
drivers/ata/libata.h | 19 +++-
include/linux/libata.h | 26 ++---
4 files changed, 246 insertions(+), 234 deletions(-)
diff --git a/drivers/ata/libata-sata.c b/drivers/ata/libata-sata.c
index c9760b52fb57..ad11a77a307c 100644
--- a/drivers/ata/libata-sata.c
+++ b/drivers/ata/libata-sata.c
@@ -8,10 +8,12 @@
#include <linux/kernel.h>
#include <linux/module.h>
+#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_device.h>
#include <linux/libata.h>
#include "libata.h"
+#include "libata-transport.h"
/* debounce timing parameters in msecs { interval, duration, timeout } */
const unsigned long sata_deb_timing_normal[] = { 5, 100, 2000 };
@@ -1059,3 +1061,214 @@ int ata_scsi_change_queue_depth(struct scsi_device *sdev, int queue_depth)
return __ata_change_queue_depth(ap, sdev, queue_depth);
}
EXPORT_SYMBOL_GPL(ata_scsi_change_queue_depth);
+
+/**
+ * port_alloc - Allocate port for a SAS attached SATA device
+ * @host: ATA host container for all SAS ports
+ * @port_info: Information from low-level host driver
+ * @shost: SCSI host that the scsi device is attached to
+ *
+ * LOCKING:
+ * PCI/etc. bus probe sem.
+ *
+ * RETURNS:
+ * ata_port pointer on success / NULL on failure.
+ */
+
+struct ata_port *ata_sas_port_alloc(struct ata_host *host,
+ struct ata_port_info *port_info,
+ struct Scsi_Host *shost)
+{
+ struct ata_port *ap;
+
+ ap = ata_port_alloc(host);
+ if (!ap)
+ return NULL;
+
+ ap->port_no = 0;
+ ap->lock = &host->lock;
+ ap->pio_mask = port_info->pio_mask;
+ ap->mwdma_mask = port_info->mwdma_mask;
+ ap->udma_mask = port_info->udma_mask;
+ ap->flags |= port_info->flags;
+ ap->ops = port_info->port_ops;
+ ap->cbl = ATA_CBL_SATA;
+
+ return ap;
+}
+EXPORT_SYMBOL_GPL(ata_sas_port_alloc);
+
+/**
+ * ata_sas_port_start - Set port up for dma.
+ * @ap: Port to initialize
+ *
+ * Called just after data structures for each port are
+ * initialized.
+ *
+ * May be used as the port_start() entry in ata_port_operations.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+int ata_sas_port_start(struct ata_port *ap)
+{
+ /*
+ * the port is marked as frozen at allocation time, but if we don't
+ * have new eh, we won't thaw it
+ */
+ if (!ap->ops->error_handler)
+ ap->pflags &= ~ATA_PFLAG_FROZEN;
+ return 0;
+}
+EXPORT_SYMBOL_GPL(ata_sas_port_start);
+
+/**
+ * ata_port_stop - Undo ata_sas_port_start()
+ * @ap: Port to shut down
+ *
+ * May be used as the port_stop() entry in ata_port_operations.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+
+void ata_sas_port_stop(struct ata_port *ap)
+{
+}
+EXPORT_SYMBOL_GPL(ata_sas_port_stop);
+
+/**
+ * ata_sas_async_probe - simply schedule probing and return
+ * @ap: Port to probe
+ *
+ * For batch scheduling of probe for sas attached ata devices, assumes
+ * the port has already been through ata_sas_port_init()
+ */
+void ata_sas_async_probe(struct ata_port *ap)
+{
+ __ata_port_probe(ap);
+}
+EXPORT_SYMBOL_GPL(ata_sas_async_probe);
+
+int ata_sas_sync_probe(struct ata_port *ap)
+{
+ return ata_port_probe(ap);
+}
+EXPORT_SYMBOL_GPL(ata_sas_sync_probe);
+
+
+/**
+ * ata_sas_port_init - Initialize a SATA device
+ * @ap: SATA port to initialize
+ *
+ * LOCKING:
+ * PCI/etc. bus probe sem.
+ *
+ * RETURNS:
+ * Zero on success, non-zero on error.
+ */
+
+int ata_sas_port_init(struct ata_port *ap)
+{
+ int rc = ap->ops->port_start(ap);
+
+ if (rc)
+ return rc;
+ ap->print_id = atomic_inc_return(&ata_print_id);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(ata_sas_port_init);
+
+int ata_sas_tport_add(struct device *parent, struct ata_port *ap)
+{
+ return ata_tport_add(parent, ap);
+}
+EXPORT_SYMBOL_GPL(ata_sas_tport_add);
+
+void ata_sas_tport_delete(struct ata_port *ap)
+{
+ ata_tport_delete(ap);
+}
+EXPORT_SYMBOL_GPL(ata_sas_tport_delete);
+
+/**
+ * ata_sas_port_destroy - Destroy a SATA port allocated by ata_sas_port_alloc
+ * @ap: SATA port to destroy
+ *
+ */
+
+void ata_sas_port_destroy(struct ata_port *ap)
+{
+ if (ap->ops->port_stop)
+ ap->ops->port_stop(ap);
+ kfree(ap);
+}
+EXPORT_SYMBOL_GPL(ata_sas_port_destroy);
+
+/**
+ * ata_sas_slave_configure - Default slave_config routine for libata devices
+ * @sdev: SCSI device to configure
+ * @ap: ATA port to which SCSI device is attached
+ *
+ * RETURNS:
+ * Zero.
+ */
+
+int ata_sas_slave_configure(struct scsi_device *sdev, struct ata_port *ap)
+{
+ ata_scsi_sdev_config(sdev);
+ ata_scsi_dev_config(sdev, ap->link.device);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(ata_sas_slave_configure);
+
+/**
+ * ata_sas_queuecmd - Issue SCSI cdb to libata-managed device
+ * @cmd: SCSI command to be sent
+ * @ap: ATA port to which the command is being sent
+ *
+ * RETURNS:
+ * Return value from __ata_scsi_queuecmd() if @cmd can be queued,
+ * 0 otherwise.
+ */
+
+int ata_sas_queuecmd(struct scsi_cmnd *cmd, struct ata_port *ap)
+{
+ int rc = 0;
+
+ ata_scsi_dump_cdb(ap, cmd);
+
+ if (likely(ata_dev_enabled(ap->link.device)))
+ rc = __ata_scsi_queuecmd(cmd, ap->link.device);
+ else {
+ cmd->result = (DID_BAD_TARGET << 16);
+ cmd->scsi_done(cmd);
+ }
+ return rc;
+}
+EXPORT_SYMBOL_GPL(ata_sas_queuecmd);
+
+int ata_sas_allocate_tag(struct ata_port *ap)
+{
+ unsigned int max_queue = ap->host->n_tags;
+ unsigned int i, tag;
+
+ for (i = 0, tag = ap->sas_last_tag + 1; i < max_queue; i++, tag++) {
+ tag = tag < max_queue ? tag : 0;
+
+ /* the last tag is reserved for internal command. */
+ if (ata_tag_internal(tag))
+ continue;
+
+ if (!test_and_set_bit(tag, &ap->sas_tag_allocated)) {
+ ap->sas_last_tag = tag;
+ return tag;
+ }
+ }
+ return -1;
+}
+
+void ata_sas_free_tag(unsigned int tag, struct ata_port *ap)
+{
+ clear_bit(tag, &ap->sas_tag_allocated);
+}
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 1000f7b0098b..5215761306e0 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -988,7 +988,7 @@ static void ata_gen_ata_sense(struct ata_queued_cmd *qc)
scsi_set_sense_information(sb, SCSI_SENSE_BUFFERSIZE, block);
}
-static void ata_scsi_sdev_config(struct scsi_device *sdev)
+void ata_scsi_sdev_config(struct scsi_device *sdev)
{
sdev->use_10_for_rw = 1;
sdev->use_10_for_ms = 1;
@@ -1028,8 +1028,7 @@ static int atapi_drain_needed(struct request *rq)
return atapi_cmd_type(scsi_req(rq)->cmd[0]) == ATAPI_MISC;
}
-static int ata_scsi_dev_config(struct scsi_device *sdev,
- struct ata_device *dev)
+int ata_scsi_dev_config(struct scsi_device *sdev, struct ata_device *dev)
{
struct request_queue *q = sdev->request_queue;
@@ -3993,8 +3992,7 @@ static inline ata_xlat_func_t ata_get_xlat_func(struct ata_device *dev, u8 cmd)
* Prints the contents of a SCSI command via printk().
*/
-static inline void ata_scsi_dump_cdb(struct ata_port *ap,
- struct scsi_cmnd *cmd)
+void ata_scsi_dump_cdb(struct ata_port *ap, struct scsi_cmnd *cmd)
{
#ifdef ATA_VERBOSE_DEBUG
struct scsi_device *scsidev = cmd->device;
@@ -4006,8 +4004,7 @@ static inline void ata_scsi_dump_cdb(struct ata_port *ap,
#endif
}
-static inline int __ata_scsi_queuecmd(struct scsi_cmnd *scmd,
- struct ata_device *dev)
+int __ata_scsi_queuecmd(struct scsi_cmnd *scmd, struct ata_device *dev)
{
u8 scsi_op = scmd->cmnd[0];
ata_xlat_func_t xlat_func;
@@ -4648,214 +4645,3 @@ void ata_scsi_dev_rescan(struct work_struct *work)
spin_unlock_irqrestore(ap->lock, flags);
mutex_unlock(&ap->scsi_scan_mutex);
}
-
-/**
- * ata_sas_port_alloc - Allocate port for a SAS attached SATA device
- * @host: ATA host container for all SAS ports
- * @port_info: Information from low-level host driver
- * @shost: SCSI host that the scsi device is attached to
- *
- * LOCKING:
- * PCI/etc. bus probe sem.
- *
- * RETURNS:
- * ata_port pointer on success / NULL on failure.
- */
-
-struct ata_port *ata_sas_port_alloc(struct ata_host *host,
- struct ata_port_info *port_info,
- struct Scsi_Host *shost)
-{
- struct ata_port *ap;
-
- ap = ata_port_alloc(host);
- if (!ap)
- return NULL;
-
- ap->port_no = 0;
- ap->lock = &host->lock;
- ap->pio_mask = port_info->pio_mask;
- ap->mwdma_mask = port_info->mwdma_mask;
- ap->udma_mask = port_info->udma_mask;
- ap->flags |= port_info->flags;
- ap->ops = port_info->port_ops;
- ap->cbl = ATA_CBL_SATA;
-
- return ap;
-}
-EXPORT_SYMBOL_GPL(ata_sas_port_alloc);
-
-/**
- * ata_sas_port_start - Set port up for dma.
- * @ap: Port to initialize
- *
- * Called just after data structures for each port are
- * initialized.
- *
- * May be used as the port_start() entry in ata_port_operations.
- *
- * LOCKING:
- * Inherited from caller.
- */
-int ata_sas_port_start(struct ata_port *ap)
-{
- /*
- * the port is marked as frozen at allocation time, but if we don't
- * have new eh, we won't thaw it
- */
- if (!ap->ops->error_handler)
- ap->pflags &= ~ATA_PFLAG_FROZEN;
- return 0;
-}
-EXPORT_SYMBOL_GPL(ata_sas_port_start);
-
-/**
- * ata_port_stop - Undo ata_sas_port_start()
- * @ap: Port to shut down
- *
- * May be used as the port_stop() entry in ata_port_operations.
- *
- * LOCKING:
- * Inherited from caller.
- */
-
-void ata_sas_port_stop(struct ata_port *ap)
-{
-}
-EXPORT_SYMBOL_GPL(ata_sas_port_stop);
-
-/**
- * ata_sas_async_probe - simply schedule probing and return
- * @ap: Port to probe
- *
- * For batch scheduling of probe for sas attached ata devices, assumes
- * the port has already been through ata_sas_port_init()
- */
-void ata_sas_async_probe(struct ata_port *ap)
-{
- __ata_port_probe(ap);
-}
-EXPORT_SYMBOL_GPL(ata_sas_async_probe);
-
-int ata_sas_sync_probe(struct ata_port *ap)
-{
- return ata_port_probe(ap);
-}
-EXPORT_SYMBOL_GPL(ata_sas_sync_probe);
-
-
-/**
- * ata_sas_port_init - Initialize a SATA device
- * @ap: SATA port to initialize
- *
- * LOCKING:
- * PCI/etc. bus probe sem.
- *
- * RETURNS:
- * Zero on success, non-zero on error.
- */
-
-int ata_sas_port_init(struct ata_port *ap)
-{
- int rc = ap->ops->port_start(ap);
-
- if (rc)
- return rc;
- ap->print_id = atomic_inc_return(&ata_print_id);
- return 0;
-}
-EXPORT_SYMBOL_GPL(ata_sas_port_init);
-
-int ata_sas_tport_add(struct device *parent, struct ata_port *ap)
-{
- return ata_tport_add(parent, ap);
-}
-EXPORT_SYMBOL_GPL(ata_sas_tport_add);
-
-void ata_sas_tport_delete(struct ata_port *ap)
-{
- ata_tport_delete(ap);
-}
-EXPORT_SYMBOL_GPL(ata_sas_tport_delete);
-
-/**
- * ata_sas_port_destroy - Destroy a SATA port allocated by ata_sas_port_alloc
- * @ap: SATA port to destroy
- *
- */
-
-void ata_sas_port_destroy(struct ata_port *ap)
-{
- if (ap->ops->port_stop)
- ap->ops->port_stop(ap);
- kfree(ap);
-}
-EXPORT_SYMBOL_GPL(ata_sas_port_destroy);
-
-/**
- * ata_sas_slave_configure - Default slave_config routine for libata devices
- * @sdev: SCSI device to configure
- * @ap: ATA port to which SCSI device is attached
- *
- * RETURNS:
- * Zero.
- */
-
-int ata_sas_slave_configure(struct scsi_device *sdev, struct ata_port *ap)
-{
- ata_scsi_sdev_config(sdev);
- ata_scsi_dev_config(sdev, ap->link.device);
- return 0;
-}
-EXPORT_SYMBOL_GPL(ata_sas_slave_configure);
-
-/**
- * ata_sas_queuecmd - Issue SCSI cdb to libata-managed device
- * @cmd: SCSI command to be sent
- * @ap: ATA port to which the command is being sent
- *
- * RETURNS:
- * Return value from __ata_scsi_queuecmd() if @cmd can be queued,
- * 0 otherwise.
- */
-
-int ata_sas_queuecmd(struct scsi_cmnd *cmd, struct ata_port *ap)
-{
- int rc = 0;
-
- ata_scsi_dump_cdb(ap, cmd);
-
- if (likely(ata_dev_enabled(ap->link.device)))
- rc = __ata_scsi_queuecmd(cmd, ap->link.device);
- else {
- cmd->result = (DID_BAD_TARGET << 16);
- cmd->scsi_done(cmd);
- }
- return rc;
-}
-EXPORT_SYMBOL_GPL(ata_sas_queuecmd);
-
-int ata_sas_allocate_tag(struct ata_port *ap)
-{
- unsigned int max_queue = ap->host->n_tags;
- unsigned int i, tag;
-
- for (i = 0, tag = ap->sas_last_tag + 1; i < max_queue; i++, tag++) {
- tag = tag < max_queue ? tag : 0;
-
- /* the last tag is reserved for internal command. */
- if (ata_tag_internal(tag))
- continue;
-
- if (!test_and_set_bit(tag, &ap->sas_tag_allocated)) {
- ap->sas_last_tag = tag;
- return tag;
- }
- }
- return -1;
-}
-
-void ata_sas_free_tag(unsigned int tag, struct ata_port *ap)
-{
- clear_bit(tag, &ap->sas_tag_allocated);
-}
diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index ce3f3c039572..6c808cf39135 100644
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -87,6 +87,18 @@ extern unsigned int ata_read_log_page(struct ata_device *dev, u8 log,
#define to_ata_port(d) container_of(d, struct ata_port, tdev)
+/* libata-sata.c */
+#ifdef CONFIG_SATA_HOST
+int ata_sas_allocate_tag(struct ata_port *ap);
+void ata_sas_free_tag(unsigned int tag, struct ata_port *ap);
+#else
+static inline int ata_sas_allocate_tag(struct ata_port *ap)
+{
+ return -EOPNOTSUPP;
+}
+static inline void ata_sas_free_tag(unsigned int tag, struct ata_port *ap) { }
+#endif
+
/* libata-acpi.c */
#ifdef CONFIG_ATA_ACPI
extern unsigned int ata_acpi_gtf_filter;
@@ -130,9 +142,10 @@ extern void ata_scsi_dev_rescan(struct work_struct *work);
extern int ata_bus_probe(struct ata_port *ap);
extern int ata_scsi_user_scan(struct Scsi_Host *shost, unsigned int channel,
unsigned int id, u64 lun);
-int ata_sas_allocate_tag(struct ata_port *ap);
-void ata_sas_free_tag(unsigned int tag, struct ata_port *ap);
-
+void ata_scsi_sdev_config(struct scsi_device *sdev);
+int ata_scsi_dev_config(struct scsi_device *sdev, struct ata_device *dev);
+void ata_scsi_dump_cdb(struct ata_port *ap, struct scsi_cmnd *cmd);
+int __ata_scsi_queuecmd(struct scsi_cmnd *scmd, struct ata_device *dev);
/* libata-eh.c */
extern unsigned long ata_internal_cmd_timeout(struct ata_device *dev, u8 cmd);
diff --git a/include/linux/libata.h b/include/linux/libata.h
index cc14030c139e..2d81ea2ccf12 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -1087,19 +1087,6 @@ extern int ata_scsi_ioctl(struct scsi_device *dev, unsigned int cmd,
extern int ata_scsi_queuecmd(struct Scsi_Host *h, struct scsi_cmnd *cmd);
extern int ata_sas_scsi_ioctl(struct ata_port *ap, struct scsi_device *dev,
unsigned int cmd, void __user *arg);
-extern void ata_sas_port_destroy(struct ata_port *);
-extern struct ata_port *ata_sas_port_alloc(struct ata_host *,
- struct ata_port_info *,
- struct Scsi_Host *);
-extern void ata_sas_async_probe(struct ata_port *ap);
-extern int ata_sas_sync_probe(struct ata_port *ap);
-extern int ata_sas_port_init(struct ata_port *);
-extern int ata_sas_port_start(struct ata_port *ap);
-extern int ata_sas_tport_add(struct device *parent, struct ata_port *ap);
-extern void ata_sas_tport_delete(struct ata_port *ap);
-extern void ata_sas_port_stop(struct ata_port *ap);
-extern int ata_sas_slave_configure(struct scsi_device *, struct ata_port *);
-extern int ata_sas_queuecmd(struct scsi_cmnd *cmd, struct ata_port *ap);
extern bool ata_link_online(struct ata_link *link);
extern bool ata_link_offline(struct ata_link *link);
#ifdef CONFIG_PM
@@ -1237,6 +1224,19 @@ extern int sata_link_debounce(struct ata_link *link,
extern int sata_link_scr_lpm(struct ata_link *link, enum ata_lpm_policy policy,
bool spm_wakeup);
extern int ata_slave_link_init(struct ata_port *ap);
+extern void ata_sas_port_destroy(struct ata_port *);
+extern struct ata_port *ata_sas_port_alloc(struct ata_host *,
+ struct ata_port_info *,
+ struct Scsi_Host *);
+extern void ata_sas_async_probe(struct ata_port *ap);
+extern int ata_sas_sync_probe(struct ata_port *ap);
+extern int ata_sas_port_init(struct ata_port *);
+extern int ata_sas_port_start(struct ata_port *ap);
+extern int ata_sas_tport_add(struct device *parent, struct ata_port *ap);
+extern void ata_sas_tport_delete(struct ata_port *ap);
+extern void ata_sas_port_stop(struct ata_port *ap);
+extern int ata_sas_slave_configure(struct scsi_device *, struct ata_port *);
+extern int ata_sas_queuecmd(struct scsi_cmnd *cmd, struct ata_port *ap);
extern void ata_tf_to_fis(const struct ata_taskfile *tf,
u8 pmp, int is_cmd, u8 *fis);
extern void ata_tf_from_fis(const u8 *fis, struct ata_taskfile *tf);
--
2.24.1
next prev parent reply other threads:[~2020-03-17 14:44 UTC|newest]
Thread overview: 53+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CGME20200317144340eucas1p1f6f7a6fbd27cbfeaab2ea97fbccb2836@eucas1p1.samsung.com>
2020-03-17 14:43 ` [PATCH v4 00/27] ata: optimize core code size on PATA only setups Bartlomiej Zolnierkiewicz
[not found] ` <CGME20200317144341eucas1p2f76d3656e5d787e000b25da8f0d3b7c2@eucas1p2.samsung.com>
2020-03-17 14:43 ` [PATCH v4 01/27] ata: remove stale maintainership information from core code Bartlomiej Zolnierkiewicz
[not found] ` <CGME20200317144341eucas1p1b9caa7264b35b23e78fcaeb78d865255@eucas1p1.samsung.com>
2020-03-17 14:43 ` [PATCH v4 02/27] ata: expose ncq_enable_prio sysfs attribute only on NCQ capable hosts Bartlomiej Zolnierkiewicz
2020-03-26 9:45 ` Christoph Hellwig
[not found] ` <CGME20200317144342eucas1p2d73deadcdb4cee860dd610f9f8e26bda@eucas1p2.samsung.com>
2020-03-17 14:43 ` [PATCH v4 03/27] ata: make SATA_PMP option selectable only if any SATA host driver is enabled Bartlomiej Zolnierkiewicz
2020-03-17 14:55 ` James Bottomley
2020-03-19 16:15 ` Bartlomiej Zolnierkiewicz
2020-03-26 9:46 ` Christoph Hellwig
[not found] ` <CGME20200317144342eucas1p2fd5c2e6ff69f8e10496d0468f01f5601@eucas1p2.samsung.com>
2020-03-17 14:43 ` [PATCH v4 04/27] sata_promise: use ata_cable_sata() Bartlomiej Zolnierkiewicz
2020-03-26 9:46 ` Christoph Hellwig
[not found] ` <CGME20200317144343eucas1p2aeb55b3deca6702b7c7128fe7775b708@eucas1p2.samsung.com>
2020-03-17 14:43 ` [PATCH v4 05/27] ata: simplify ata_scsiop_inq_89() Bartlomiej Zolnierkiewicz
[not found] ` <CGME20200317144343eucas1p2eb0fa17c0130d3be0b994110979e6a87@eucas1p2.samsung.com>
2020-03-17 14:43 ` [PATCH v4 06/27] ata: use COMMAND_LINE_SIZE for ata_force_param_buf[] size Bartlomiej Zolnierkiewicz
[not found] ` <CGME20200317144344eucas1p12dbd070e54e16a364b58b1c591216ebd@eucas1p1.samsung.com>
2020-03-17 14:43 ` [PATCH v4 07/27] ata: optimize struct ata_force_param size Bartlomiej Zolnierkiewicz
[not found] ` <CGME20200317144345eucas1p1e67d48caa8629fedb301e776e34dc0c1@eucas1p1.samsung.com>
2020-03-17 14:43 ` [PATCH v4 08/27] ata: optimize ata_scsi_rbuf[] size Bartlomiej Zolnierkiewicz
2020-03-26 9:48 ` Christoph Hellwig
[not found] ` <CGME20200317144345eucas1p209f6a96605af02cc451786051ebab395@eucas1p2.samsung.com>
2020-03-17 14:43 ` [PATCH v4 09/27] ata: move EXPORT_SYMBOL_GPL()s close to exported code Bartlomiej Zolnierkiewicz
[not found] ` <CGME20200317144346eucas1p2d1e330410bd3482ce01c98db40d5612b@eucas1p2.samsung.com>
2020-03-17 14:43 ` [PATCH v4 10/27] ata: remove EXPORT_SYMBOL_GPL()s not used by modules Bartlomiej Zolnierkiewicz
[not found] ` <CGME20200317144346eucas1p201a88e2eb094f1a246d0eb541541131f@eucas1p2.samsung.com>
2020-03-17 14:43 ` [PATCH v4 11/27] ata: fix CodingStyle issues in PATA timings code Bartlomiej Zolnierkiewicz
2020-03-26 9:49 ` Christoph Hellwig
[not found] ` <CGME20200317144347eucas1p103561521def960afc46a2531076e18df@eucas1p1.samsung.com>
2020-03-17 14:43 ` [PATCH v4 12/27] ata: separate PATA timings code from libata-core.c Bartlomiej Zolnierkiewicz
2020-03-26 9:49 ` Christoph Hellwig
[not found] ` <CGME20200317144347eucas1p293ab462ec3d4990f380f9d652195cdb4@eucas1p2.samsung.com>
2020-03-17 14:43 ` [PATCH v4 13/27] ata: add CONFIG_SATA_HOST=n version of ata_ncq_enabled() Bartlomiej Zolnierkiewicz
2020-03-26 9:50 ` Christoph Hellwig
[not found] ` <CGME20200317144348eucas1p14ad861316b19edaf885a52f9beb5dd2a@eucas1p1.samsung.com>
2020-03-17 14:43 ` [PATCH v4 14/27] ata: let compiler optimize out ata_dev_config_ncq() on non-SATA hosts Bartlomiej Zolnierkiewicz
2020-03-26 9:50 ` Christoph Hellwig
[not found] ` <CGME20200317144348eucas1p2cce1c6e1ce8bafc0e68dec04655f1932@eucas1p2.samsung.com>
2020-03-17 14:43 ` [PATCH v4 15/27] ata: let compiler optimize out ata_eh_set_lpm() " Bartlomiej Zolnierkiewicz
2020-03-26 9:50 ` Christoph Hellwig
[not found] ` <CGME20200317144349eucas1p1921dee3dcd097f695ba708c54325f226@eucas1p1.samsung.com>
2020-03-17 14:43 ` [PATCH v4 16/27] ata: start separating SATA specific code from libata-core.c Bartlomiej Zolnierkiewicz
2020-03-26 9:51 ` Christoph Hellwig
[not found] ` <CGME20200317144349eucas1p1a2e79758cbdf36c747c8a82cd4ddbd74@eucas1p1.samsung.com>
2020-03-17 14:43 ` [PATCH v4 17/27] ata: move sata_scr_*() to libata-sata.c Bartlomiej Zolnierkiewicz
2020-03-26 9:52 ` Christoph Hellwig
[not found] ` <CGME20200317144350eucas1p2caf23e8366434ef2c9954cd4d52f30f1@eucas1p2.samsung.com>
2020-03-17 14:43 ` [PATCH v4 18/27] ata: move *sata_set_spd*() " Bartlomiej Zolnierkiewicz
2020-03-26 9:52 ` Christoph Hellwig
[not found] ` <CGME20200317144350eucas1p2270ca7a1757769b238be42c2811172a1@eucas1p2.samsung.com>
2020-03-17 14:43 ` [PATCH v4 19/27] ata: move sata_link_{debounce,resume}() " Bartlomiej Zolnierkiewicz
2020-03-26 9:55 ` Christoph Hellwig
[not found] ` <CGME20200317144350eucas1p157dd88ee3f766ec4fd209172635369aa@eucas1p1.samsung.com>
2020-03-17 14:43 ` [PATCH v4 20/27] ata: move sata_link_hardreset() " Bartlomiej Zolnierkiewicz
2020-03-26 9:57 ` Christoph Hellwig
[not found] ` <CGME20200317144351eucas1p1d8d18236e6729d0bf21737a4296f56d7@eucas1p1.samsung.com>
2020-03-17 14:43 ` [PATCH v4 21/27] ata: move ata_qc_complete_multiple() " Bartlomiej Zolnierkiewicz
2020-03-26 9:57 ` Christoph Hellwig
[not found] ` <CGME20200317144351eucas1p2020714aa775f0ab3aaea870d25f7fb92@eucas1p2.samsung.com>
2020-03-17 14:43 ` [PATCH v4 22/27] ata: move sata_deb_timing_*() " Bartlomiej Zolnierkiewicz
2020-03-26 9:58 ` Christoph Hellwig
[not found] ` <CGME20200317144352eucas1p1ddb279cb52e2ae6f5189878912581162@eucas1p1.samsung.com>
2020-03-17 14:43 ` [PATCH v4 23/27] ata: start separating SATA specific code from libata-scsi.c Bartlomiej Zolnierkiewicz
2020-03-26 9:59 ` Christoph Hellwig
[not found] ` <CGME20200317144353eucas1p163ca190ee937e771b4a583408500070a@eucas1p1.samsung.com>
2020-03-17 14:43 ` Bartlomiej Zolnierkiewicz [this message]
2020-03-26 10:00 ` [PATCH v4 24/27] ata: move ata_sas_*() to libata-sata.c Christoph Hellwig
[not found] ` <CGME20200317144353eucas1p22a8a5d4a9c920db90387720159a26c90@eucas1p2.samsung.com>
2020-03-17 14:43 ` [PATCH v4 25/27] ata: start separating SATA specific code from libata-eh.c Bartlomiej Zolnierkiewicz
2020-03-26 10:00 ` Christoph Hellwig
[not found] ` <CGME20200317144353eucas1p120a8f1a0fa5c293ada61b8d06f7aa9ec@eucas1p1.samsung.com>
2020-03-17 14:43 ` [PATCH v4 26/27] ata: move ata_eh_analyze_ncq_error() & co. to libata-sata.c Bartlomiej Zolnierkiewicz
2020-03-26 10:00 ` Christoph Hellwig
[not found] ` <CGME20200317144354eucas1p250e3fc557c00a80eda42b3332984f078@eucas1p2.samsung.com>
2020-03-17 14:43 ` [PATCH v4 27/27] ata: make "libata.force" kernel parameter optional Bartlomiej Zolnierkiewicz
2020-03-26 10:01 ` Christoph Hellwig
2020-03-26 15:16 ` [PATCH v4 00/27] ata: optimize core code size on PATA only setups Jens Axboe
2020-03-26 16:17 ` Bartlomiej Zolnierkiewicz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200317144333.2904-25-b.zolnierkie@samsung.com \
--to=b.zolnierkie@samsung.com \
--cc=axboe@kernel.dk \
--cc=geert@linux-m68k.org \
--cc=hch@lst.de \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-m68k@lists.linux-m68k.org \
--cc=schmitzmic@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).