Linux-m68k Archive on lore.kernel.org
 help / color / Atom feed
From: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
To: Jens Axboe <axboe@kernel.dk>
Cc: Michael Schmitz <schmitzmic@gmail.com>,
	Geert Uytterhoeven <geert@linux-m68k.org>,
	Christoph Hellwig <hch@lst.de>,
	linux-ide@vger.kernel.org, linux-m68k@lists.linux-m68k.org,
	linux-kernel@vger.kernel.org, b.zolnierkie@samsung.com,
	"James E.J. Bottomley" <jejb@linux.ibm.com>,
	"Martin K . Petersen" <martin.petersen@oracle.com>
Subject: [PATCH v5 03/27] ata: make SATA_PMP option selectable only if any SATA host driver is enabled
Date: Thu, 26 Mar 2020 16:57:58 +0100
Message-ID: <20200326155822.19400-4-b.zolnierkie@samsung.com> (raw)
In-Reply-To: <20200326155822.19400-1-b.zolnierkie@samsung.com>

There is no reason to expose SATA_PMP config option when no SATA
host drivers are enabled. To fix it add SATA_HOST config option,
make all SATA host drivers select it and finally make SATA_PMP
config options depend on it.

This also serves as preparation for the future changes which
optimize libata core code size on PATA only setups.

CC: "James E.J. Bottomley" <jejb@linux.ibm.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> # for SCSI bits
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
---
 drivers/ata/Kconfig         | 40 +++++++++++++++++++++++++++++++++++++
 drivers/scsi/Kconfig        |  1 +
 drivers/scsi/libsas/Kconfig |  1 +
 3 files changed, 42 insertions(+)

diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index a6beb2c5a692..ad7760656f71 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -34,6 +34,9 @@ if ATA
 config ATA_NONSTANDARD
        bool
 
+config SATA_HOST
+	bool
+
 config ATA_VERBOSE_ERROR
 	bool "Verbose ATA error reporting"
 	default y
@@ -73,6 +76,7 @@ config SATA_ZPODD
 
 config SATA_PMP
 	bool "SATA Port Multiplier support"
+	depends on SATA_HOST
 	default y
 	help
 	  This option adds support for SATA Port Multipliers
@@ -85,6 +89,7 @@ comment "Controllers with non-SFF native interface"
 config SATA_AHCI
 	tristate "AHCI SATA support"
 	depends on PCI
+	select SATA_HOST
 	help
 	  This option enables support for AHCI Serial ATA.
 
@@ -111,6 +116,7 @@ config SATA_MOBILE_LPM_POLICY
 
 config SATA_AHCI_PLATFORM
 	tristate "Platform AHCI SATA support"
+	select SATA_HOST
 	help
 	  This option enables support for Platform AHCI Serial ATA
 	  controllers.
@@ -121,6 +127,7 @@ config AHCI_BRCM
 	tristate "Broadcom AHCI SATA support"
 	depends on ARCH_BRCMSTB || BMIPS_GENERIC || ARCH_BCM_NSP || \
 		   ARCH_BCM_63XX
+	select SATA_HOST
 	help
 	  This option enables support for the AHCI SATA3 controller found on
 	  Broadcom SoC's.
@@ -130,6 +137,7 @@ config AHCI_BRCM
 config AHCI_DA850
 	tristate "DaVinci DA850 AHCI SATA support"
 	depends on ARCH_DAVINCI_DA850
+	select SATA_HOST
 	help
 	  This option enables support for the DaVinci DA850 SoC's
 	  onboard AHCI SATA.
@@ -139,6 +147,7 @@ config AHCI_DA850
 config AHCI_DM816
 	tristate "DaVinci DM816 AHCI SATA support"
 	depends on ARCH_OMAP2PLUS
+	select SATA_HOST
 	help
 	  This option enables support for the DaVinci DM816 SoC's
 	  onboard AHCI SATA controller.
@@ -148,6 +157,7 @@ config AHCI_DM816
 config AHCI_ST
 	tristate "ST AHCI SATA support"
 	depends on ARCH_STI
+	select SATA_HOST
 	help
 	  This option enables support for ST AHCI SATA controller.
 
@@ -157,6 +167,7 @@ config AHCI_IMX
 	tristate "Freescale i.MX AHCI SATA support"
 	depends on MFD_SYSCON && (ARCH_MXC || COMPILE_TEST)
 	depends on (HWMON && (THERMAL || !THERMAL_OF)) || !HWMON
+	select SATA_HOST
 	help
 	  This option enables support for the Freescale i.MX SoC's
 	  onboard AHCI SATA.
@@ -166,6 +177,7 @@ config AHCI_IMX
 config AHCI_CEVA
 	tristate "CEVA AHCI SATA support"
 	depends on OF
+	select SATA_HOST
 	help
 	  This option enables support for the CEVA AHCI SATA.
 	  It can be found on the Xilinx Zynq UltraScale+ MPSoC.
@@ -176,6 +188,7 @@ config AHCI_MTK
 	tristate "MediaTek AHCI SATA support"
 	depends on ARCH_MEDIATEK
 	select MFD_SYSCON
+	select SATA_HOST
 	help
 	  This option enables support for the MediaTek SoC's
 	  onboard AHCI SATA controller.
@@ -185,6 +198,7 @@ config AHCI_MTK
 config AHCI_MVEBU
 	tristate "Marvell EBU AHCI SATA support"
 	depends on ARCH_MVEBU
+	select SATA_HOST
 	help
 	  This option enables support for the Marvebu EBU SoC's
 	  onboard AHCI SATA.
@@ -203,6 +217,7 @@ config AHCI_OCTEON
 config AHCI_SUNXI
 	tristate "Allwinner sunxi AHCI SATA support"
 	depends on ARCH_SUNXI
+	select SATA_HOST
 	help
 	  This option enables support for the Allwinner sunxi SoC's
 	  onboard AHCI SATA.
@@ -212,6 +227,7 @@ config AHCI_SUNXI
 config AHCI_TEGRA
 	tristate "NVIDIA Tegra AHCI SATA support"
 	depends on ARCH_TEGRA
+	select SATA_HOST
 	help
 	  This option enables support for the NVIDIA Tegra SoC's
 	  onboard AHCI SATA.
@@ -221,12 +237,14 @@ config AHCI_TEGRA
 config AHCI_XGENE
 	tristate "APM X-Gene 6.0Gbps AHCI SATA host controller support"
 	depends on PHY_XGENE
+	select SATA_HOST
 	help
 	 This option enables support for APM X-Gene SoC SATA host controller.
 
 config AHCI_QORIQ
 	tristate "Freescale QorIQ AHCI SATA support"
 	depends on OF
+	select SATA_HOST
 	help
 	  This option enables support for the Freescale QorIQ AHCI SoC's
 	  onboard AHCI SATA.
@@ -236,6 +254,7 @@ config AHCI_QORIQ
 config SATA_FSL
 	tristate "Freescale 3.0Gbps SATA support"
 	depends on FSL_SOC
+	select SATA_HOST
 	help
 	  This option enables support for Freescale 3.0Gbps SATA controller.
 	  It can be found on MPC837x and MPC8315.
@@ -245,6 +264,7 @@ config SATA_FSL
 config SATA_GEMINI
 	tristate "Gemini SATA bridge support"
 	depends on ARCH_GEMINI || COMPILE_TEST
+	select SATA_HOST
 	default ARCH_GEMINI
 	help
 	  This enabled support for the FTIDE010 to SATA bridge
@@ -255,6 +275,7 @@ config SATA_GEMINI
 config SATA_AHCI_SEATTLE
 	tristate "AMD Seattle 6.0Gbps AHCI SATA host controller support"
 	depends on ARCH_SEATTLE
+	select SATA_HOST
 	help
 	 This option enables support for AMD Seattle SATA host controller.
 
@@ -263,12 +284,14 @@ config SATA_AHCI_SEATTLE
 config SATA_INIC162X
 	tristate "Initio 162x SATA support (Very Experimental)"
 	depends on PCI
+	select SATA_HOST
 	help
 	  This option enables support for Initio 162x Serial ATA.
 
 config SATA_ACARD_AHCI
 	tristate "ACard AHCI variant (ATP 8620)"
 	depends on PCI
+	select SATA_HOST
 	help
 	  This option enables support for Acard.
 
@@ -277,6 +300,7 @@ config SATA_ACARD_AHCI
 config SATA_SIL24
 	tristate "Silicon Image 3124/3132 SATA support"
 	depends on PCI
+	select SATA_HOST
 	help
 	  This option enables support for Silicon Image 3124/3132 Serial ATA.
 
@@ -326,6 +350,7 @@ config PATA_OCTEON_CF
 config SATA_QSTOR
 	tristate "Pacific Digital SATA QStor support"
 	depends on PCI
+	select SATA_HOST
 	help
 	  This option enables support for Pacific Digital Serial ATA QStor.
 
@@ -334,6 +359,7 @@ config SATA_QSTOR
 config SATA_SX4
 	tristate "Promise SATA SX4 support (Experimental)"
 	depends on PCI
+	select SATA_HOST
 	help
 	  This option enables support for Promise Serial ATA SX4.
 
@@ -357,6 +383,7 @@ comment "SATA SFF controllers with BMDMA"
 config ATA_PIIX
 	tristate "Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support"
 	depends on PCI
+	select SATA_HOST
 	help
 	  This option enables support for ICH5/6/7/8 Serial ATA
 	  and support for PATA on the Intel ESB/ICH/PIIX3/PIIX4 series
@@ -368,6 +395,7 @@ config SATA_DWC
 	tristate "DesignWare Cores SATA support"
 	depends on DMADEVICES
 	select GENERIC_PHY
+	select SATA_HOST
 	help
 	  This option enables support for the on-chip SATA controller of the
 	  AppliedMicro processor 460EX.
@@ -398,6 +426,7 @@ config SATA_DWC_VDEBUG
 config SATA_HIGHBANK
 	tristate "Calxeda Highbank SATA support"
 	depends on ARCH_HIGHBANK || COMPILE_TEST
+	select SATA_HOST
 	help
 	  This option enables support for the Calxeda Highbank SoC's
 	  onboard SATA.
@@ -409,6 +438,7 @@ config SATA_MV
 	depends on PCI || ARCH_DOVE || ARCH_MV78XX0 || \
 		   ARCH_MVEBU || ARCH_ORION5X || COMPILE_TEST
 	select GENERIC_PHY
+	select SATA_HOST
 	help
 	  This option enables support for the Marvell Serial ATA family.
 	  Currently supports 88SX[56]0[48][01] PCI(-X) chips,
@@ -419,6 +449,7 @@ config SATA_MV
 config SATA_NV
 	tristate "NVIDIA SATA support"
 	depends on PCI
+	select SATA_HOST
 	help
 	  This option enables support for NVIDIA Serial ATA.
 
@@ -427,6 +458,7 @@ config SATA_NV
 config SATA_PROMISE
 	tristate "Promise SATA TX2/TX4 support"
 	depends on PCI
+	select SATA_HOST
 	help
 	  This option enables support for Promise Serial ATA TX2/TX4.
 
@@ -435,6 +467,7 @@ config SATA_PROMISE
 config SATA_RCAR
 	tristate "Renesas R-Car SATA support"
 	depends on ARCH_RENESAS || COMPILE_TEST
+	select SATA_HOST
 	help
 	  This option enables support for Renesas R-Car Serial ATA.
 
@@ -443,6 +476,7 @@ config SATA_RCAR
 config SATA_SIL
 	tristate "Silicon Image SATA support"
 	depends on PCI
+	select SATA_HOST
 	help
 	  This option enables support for Silicon Image Serial ATA.
 
@@ -452,6 +486,7 @@ config SATA_SIS
 	tristate "SiS 964/965/966/180 SATA support"
 	depends on PCI
 	select PATA_SIS
+	select SATA_HOST
 	help
 	  This option enables support for SiS Serial ATA on
 	  SiS 964/965/966/180 and Parallel ATA on SiS 180.
@@ -462,6 +497,7 @@ config SATA_SIS
 config SATA_SVW
 	tristate "ServerWorks Frodo / Apple K2 SATA support"
 	depends on PCI
+	select SATA_HOST
 	help
 	  This option enables support for Broadcom/Serverworks/Apple K2
 	  SATA support.
@@ -471,6 +507,7 @@ config SATA_SVW
 config SATA_ULI
 	tristate "ULi Electronics SATA support"
 	depends on PCI
+	select SATA_HOST
 	help
 	  This option enables support for ULi Electronics SATA.
 
@@ -479,6 +516,7 @@ config SATA_ULI
 config SATA_VIA
 	tristate "VIA SATA support"
 	depends on PCI
+	select SATA_HOST
 	help
 	  This option enables support for VIA Serial ATA.
 
@@ -487,6 +525,7 @@ config SATA_VIA
 config SATA_VITESSE
 	tristate "VITESSE VSC-7174 / INTEL 31244 SATA support"
 	depends on PCI
+	select SATA_HOST
 	help
 	  This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA.
 
@@ -1113,6 +1152,7 @@ config PATA_ACPI
 config ATA_GENERIC
 	tristate "Generic ATA support"
 	depends on PCI && ATA_BMDMA
+	select SATA_HOST
 	help
 	  This option enables support for generic BIOS configured
 	  ATA controllers via the new ATA layer
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index b5be6f43ec3f..17feff174f57 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -980,6 +980,7 @@ config SCSI_SYM53C8XX_MMIO
 config SCSI_IPR
 	tristate "IBM Power Linux RAID adapter support"
 	depends on PCI && SCSI && ATA
+	select SATA_HOST
 	select FW_LOADER
 	select IRQ_POLL
 	select SGL_ALLOC
diff --git a/drivers/scsi/libsas/Kconfig b/drivers/scsi/libsas/Kconfig
index 5c6a5eff2f8e..052ee3a26f6e 100644
--- a/drivers/scsi/libsas/Kconfig
+++ b/drivers/scsi/libsas/Kconfig
@@ -19,6 +19,7 @@ config SCSI_SAS_ATA
 	bool "ATA support for libsas (requires libata)"
 	depends on SCSI_SAS_LIBSAS
 	depends on ATA = y || ATA = SCSI_SAS_LIBSAS
+	select SATA_HOST
 	help
 		Builds in ATA support into libsas.  Will necessitate
 		the loading of libata along with libsas.
-- 
2.24.1


  parent reply index

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <CGME20200326155838eucas1p2a1c1f5c08832410d1e2b5a5ea8226151@eucas1p2.samsung.com>
2020-03-26 15:57 ` [PATCH v5 00/27] ata: optimize core code size on PATA only setups Bartlomiej Zolnierkiewicz
     [not found]   ` <CGME20200326155838eucas1p1931e5db55f9efd231696c210c0690733@eucas1p1.samsung.com>
2020-03-26 15:57     ` [PATCH v5 01/27] ata: remove stale maintainership information from core code Bartlomiej Zolnierkiewicz
     [not found]   ` <CGME20200326155839eucas1p2c9e354eb1f81d47c2c00d1c6c42f28a5@eucas1p2.samsung.com>
2020-03-26 15:57     ` [PATCH v5 02/27] ata: expose ncq_enable_prio sysfs attribute only on NCQ capable hosts Bartlomiej Zolnierkiewicz
     [not found]   ` <CGME20200326155839eucas1p226e80fe61b5df9c08ec23c7d93c843db@eucas1p2.samsung.com>
2020-03-26 15:57     ` Bartlomiej Zolnierkiewicz [this message]
     [not found]   ` <CGME20200326155839eucas1p1d5c84c9070fd1a1282b590172be640b1@eucas1p1.samsung.com>
2020-03-26 15:57     ` [PATCH v5 04/27] sata_promise: use ata_cable_sata() Bartlomiej Zolnierkiewicz
     [not found]   ` <CGME20200326155840eucas1p1fd8d2a9a30f2f97dbf4a78258191c624@eucas1p1.samsung.com>
2020-03-26 15:58     ` [PATCH v5 05/27] ata: simplify ata_scsiop_inq_89() Bartlomiej Zolnierkiewicz
     [not found]   ` <CGME20200326155840eucas1p2861601dc1c971a2baade72b03baee9f0@eucas1p2.samsung.com>
2020-03-26 15:58     ` [PATCH v5 06/27] ata: use COMMAND_LINE_SIZE for ata_force_param_buf[] size Bartlomiej Zolnierkiewicz
     [not found]   ` <CGME20200326155841eucas1p1b9f0b5feb3d00618fc08d962abc709a9@eucas1p1.samsung.com>
2020-03-26 15:58     ` [PATCH v5 07/27] ata: optimize struct ata_force_param size Bartlomiej Zolnierkiewicz
     [not found]   ` <CGME20200326155841eucas1p29ed1b37ca4364f205c6404ed978aa007@eucas1p2.samsung.com>
2020-03-26 15:58     ` [PATCH v5 08/27] ata: optimize ata_scsi_rbuf[] size Bartlomiej Zolnierkiewicz
     [not found]   ` <CGME20200326155842eucas1p16ec1dd1303741c202766ce6f1264df5d@eucas1p1.samsung.com>
2020-03-26 15:58     ` [PATCH v5 09/27] ata: move EXPORT_SYMBOL_GPL()s close to exported code Bartlomiej Zolnierkiewicz
     [not found]   ` <CGME20200326155842eucas1p23d6b95d066eaf1a86e04935641015af6@eucas1p2.samsung.com>
2020-03-26 15:58     ` [PATCH v5 10/27] ata: remove EXPORT_SYMBOL_GPL()s not used by modules Bartlomiej Zolnierkiewicz
     [not found]   ` <CGME20200326155842eucas1p1aa92a260749305a13bebcd7999fd801b@eucas1p1.samsung.com>
2020-03-26 15:58     ` [PATCH v5 11/27] ata: fix CodingStyle issues in PATA timings code Bartlomiej Zolnierkiewicz
     [not found]   ` <CGME20200326155843eucas1p19fd3210ca004306942c7c12ca98e04c2@eucas1p1.samsung.com>
2020-03-26 15:58     ` [PATCH v5 12/27] ata: separate PATA timings code from libata-core.c Bartlomiej Zolnierkiewicz
     [not found]   ` <CGME20200326155843eucas1p1c3f378cfd16d7f2a29d46e1456d8cbfd@eucas1p1.samsung.com>
2020-03-26 15:58     ` [PATCH v5 13/27] ata: add CONFIG_SATA_HOST=n version of ata_ncq_enabled() Bartlomiej Zolnierkiewicz
     [not found]   ` <CGME20200326155844eucas1p2e9676a4dd5205dc66c464cf8d9f4efb7@eucas1p2.samsung.com>
2020-03-26 15:58     ` [PATCH v5 14/27] ata: let compiler optimize out ata_dev_config_ncq() on non-SATA hosts Bartlomiej Zolnierkiewicz
     [not found]   ` <CGME20200326155844eucas1p264f9d573deb8bf9019e2e2d5cb59472b@eucas1p2.samsung.com>
2020-03-26 15:58     ` [PATCH v5 15/27] ata: let compiler optimize out ata_eh_set_lpm() " Bartlomiej Zolnierkiewicz
     [not found]   ` <CGME20200326155845eucas1p29de94fa9d541972b78334ebfd0055320@eucas1p2.samsung.com>
2020-03-26 15:58     ` [PATCH v5 16/27] ata: start separating SATA specific code from libata-core.c Bartlomiej Zolnierkiewicz
     [not found]   ` <CGME20200326155845eucas1p2cd33e166f3ac6ab47f4681385491f538@eucas1p2.samsung.com>
2020-03-26 15:58     ` [PATCH v5 17/27] ata: move sata_scr_*() to libata-sata.c Bartlomiej Zolnierkiewicz
     [not found]   ` <CGME20200326155845eucas1p170d540c74535517def9925bf9dffc0c7@eucas1p1.samsung.com>
2020-03-26 15:58     ` [PATCH v5 18/27] ata: move *sata_set_spd*() " Bartlomiej Zolnierkiewicz
     [not found]   ` <CGME20200326155846eucas1p2c1a68a558be3f6df1308cd665ca60e32@eucas1p2.samsung.com>
2020-03-26 15:58     ` [PATCH v5 19/27] ata: move sata_link_{debounce,resume}() " Bartlomiej Zolnierkiewicz
     [not found]   ` <CGME20200326155846eucas1p26ed8a94105fa06625f4fd2c4a66f8960@eucas1p2.samsung.com>
2020-03-26 15:58     ` [PATCH v5 20/27] ata: move sata_link_hardreset() " Bartlomiej Zolnierkiewicz
     [not found]   ` <CGME20200326155847eucas1p1ed7286be9fa1a0616efc2d148bffe50d@eucas1p1.samsung.com>
2020-03-26 15:58     ` [PATCH v5 21/27] ata: move ata_qc_complete_multiple() " Bartlomiej Zolnierkiewicz
     [not found]   ` <CGME20200326155847eucas1p274137b9af50464c076fbbfb45947493d@eucas1p2.samsung.com>
2020-03-26 15:58     ` [PATCH v5 22/27] ata: move sata_deb_timing_*() " Bartlomiej Zolnierkiewicz
     [not found]   ` <CGME20200326155847eucas1p2934ac7ef0c591dc15912b4d59d925d4c@eucas1p2.samsung.com>
2020-03-26 15:58     ` [PATCH v5 23/27] ata: start separating SATA specific code from libata-scsi.c Bartlomiej Zolnierkiewicz
     [not found]   ` <CGME20200326155848eucas1p2f3c45c3f3a26da7950118a88a1a65502@eucas1p2.samsung.com>
2020-03-26 15:58     ` [PATCH v5 24/27] ata: move ata_sas_*() to libata-sata.c Bartlomiej Zolnierkiewicz
     [not found]   ` <CGME20200326155848eucas1p1c9c2ca0451748cdfa4ab6a3420ab2847@eucas1p1.samsung.com>
2020-03-26 15:58     ` [PATCH v5 25/27] ata: start separating SATA specific code from libata-eh.c Bartlomiej Zolnierkiewicz
     [not found]   ` <CGME20200326155849eucas1p1b7b96c8913106b0330344af0500aca99@eucas1p1.samsung.com>
2020-03-26 15:58     ` [PATCH v5 26/27] ata: move ata_eh_analyze_ncq_error() & co. to libata-sata.c Bartlomiej Zolnierkiewicz
     [not found]   ` <CGME20200326155849eucas1p2c1c0d059d5474597bd1eec3a6855ed8a@eucas1p2.samsung.com>
2020-03-26 15:58     ` [PATCH v5 27/27] ata: make "libata.force" kernel parameter optional Bartlomiej Zolnierkiewicz
2020-03-26 16:28   ` [PATCH v5 00/27] ata: optimize core code size on PATA only setups Jens Axboe

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200326155822.19400-4-b.zolnierkie@samsung.com \
    --to=b.zolnierkie@samsung.com \
    --cc=axboe@kernel.dk \
    --cc=geert@linux-m68k.org \
    --cc=hch@lst.de \
    --cc=jejb@linux.ibm.com \
    --cc=linux-ide@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-m68k@lists.linux-m68k.org \
    --cc=martin.petersen@oracle.com \
    --cc=schmitzmic@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-m68k Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-m68k/0 linux-m68k/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-m68k linux-m68k/ https://lore.kernel.org/linux-m68k \
		linux-m68k@vger.kernel.org linux-m68k@lists.linux-m68k.org
	public-inbox-index linux-m68k

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-m68k


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git