From: Ulf Hansson <ulf.hansson@linaro.org>
To: Angelo Dureghello <angelo.dureghello@timesys.com>,
Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>,
"linux-mmc@vger.kernel.org" <linux-mmc@vger.kernel.org>,
linux-m68k@vger.kernel.org
Subject: Re: [PATCH v3 1/3] m68k: mcf5441x: add support for esdhc mmc controller
Date: Thu, 7 May 2020 11:13:39 +0200 [thread overview]
Message-ID: <CAPDyKFoLpMTQD+3SnXBNnqVLBMKDf6y=3X+MoPep42SCiQ6+TQ@mail.gmail.com> (raw)
In-Reply-To: <20200501235907.3978-1-angelo.dureghello@timesys.com>
+ Geert
On Sat, 2 May 2020 at 01:54, Angelo Dureghello
<angelo.dureghello@timesys.com> wrote:
>
> Add support for sdhci-edshc mmc controller.
>
> Signed-off-by: Angelo Dureghello <angelo.dureghello@timesys.com>
> ---
> Changes for v3:
> - removed volatile cast from clk.c
> ---
> arch/m68k/coldfire/clk.c | 15 ++++++++++
> arch/m68k/coldfire/device.c | 33 +++++++++++++++++++--
> arch/m68k/coldfire/m5441x.c | 12 +++++++-
> arch/m68k/include/asm/m5441xsim.h | 19 ++++++++++++
> arch/m68k/include/asm/mcfclk.h | 2 ++
> include/linux/platform_data/mmc-esdhc-mcf.h | 17 +++++++++++
> 6 files changed, 95 insertions(+), 3 deletions(-)
> create mode 100644 include/linux/platform_data/mmc-esdhc-mcf.h
Not sure what's the best way to deal with this patch. I looped in
Geert to get some input.
If it looks okay and the risk is minimal for conflicts, I can carry it
via my tree, but then I need an ack from Geert.
Kind regards
Uffe
>
> diff --git a/arch/m68k/coldfire/clk.c b/arch/m68k/coldfire/clk.c
> index 7bc666e482eb..8d048a72e173 100644
> --- a/arch/m68k/coldfire/clk.c
> +++ b/arch/m68k/coldfire/clk.c
> @@ -73,6 +73,21 @@ struct clk_ops clk_ops1 = {
> #endif /* MCFPM_PPMCR1 */
> #endif /* MCFPM_PPMCR0 */
>
> +static void __clk_enable2(struct clk *clk)
> +{
> + __set_bit(clk->slot, MCFSDHC_CLK);
> +}
> +
> +static void __clk_disable2(struct clk *clk)
> +{
> + __clear_bit(clk->slot, MCFSDHC_CLK);
> +}
> +
> +struct clk_ops clk_ops2 = {
> + .enable = __clk_enable2,
> + .disable = __clk_disable2,
> +};
> +
> struct clk *clk_get(struct device *dev, const char *id)
> {
> const char *clk_name = dev ? dev_name(dev) : id ? id : NULL;
> diff --git a/arch/m68k/coldfire/device.c b/arch/m68k/coldfire/device.c
> index b4103b6bfdeb..9ef4ec0aea00 100644
> --- a/arch/m68k/coldfire/device.c
> +++ b/arch/m68k/coldfire/device.c
> @@ -22,6 +22,7 @@
> #include <asm/mcfqspi.h>
> #include <linux/platform_data/edma.h>
> #include <linux/platform_data/dma-mcf-edma.h>
> +#include <linux/platform_data/mmc-esdhc-mcf.h>
>
> /*
> * All current ColdFire parts contain from 2, 3, 4 or 10 UARTS.
> @@ -551,9 +552,35 @@ static struct platform_device mcf_edma = {
> .platform_data = &mcf_edma_data,
> }
> };
> -
> #endif /* IS_ENABLED(CONFIG_MCF_EDMA) */
>
> +#if IS_ENABLED(CONFIG_MMC)
> +static struct mcf_esdhc_platform_data mcf_esdhc_data = {
> + .max_bus_width = 4,
> + .cd_type = ESDHC_CD_NONE,
> +};
> +
> +static struct resource mcf_esdhc_resources[] = {
> + {
> + .start = MCFSDHC_BASE,
> + .end = MCFSDHC_BASE + MCFSDHC_SIZE - 1,
> + .flags = IORESOURCE_MEM,
> + }, {
> + .start = MCF_IRQ_SDHC,
> + .end = MCF_IRQ_SDHC,
> + .flags = IORESOURCE_IRQ,
> + },
> +};
> +
> +static struct platform_device mcf_esdhc = {
> + .name = "sdhci-esdhc-mcf",
> + .id = 0,
> + .num_resources = ARRAY_SIZE(mcf_esdhc_resources),
> + .resource = mcf_esdhc_resources,
> + .dev.platform_data = &mcf_esdhc_data,
> +};
> +#endif /* IS_ENABLED(CONFIG_MMC) */
> +
> static struct platform_device *mcf_devices[] __initdata = {
> &mcf_uart,
> #if IS_ENABLED(CONFIG_FEC)
> @@ -586,6 +613,9 @@ static struct platform_device *mcf_devices[] __initdata = {
> #if IS_ENABLED(CONFIG_MCF_EDMA)
> &mcf_edma,
> #endif
> +#if IS_ENABLED(CONFIG_MMC)
> + &mcf_esdhc,
> +#endif
> };
>
> /*
> @@ -614,4 +644,3 @@ static int __init mcf_init_devices(void)
> }
>
> arch_initcall(mcf_init_devices);
> -
> diff --git a/arch/m68k/coldfire/m5441x.c b/arch/m68k/coldfire/m5441x.c
> index 5bd24c9b865d..ffa02de1a3fb 100644
> --- a/arch/m68k/coldfire/m5441x.c
> +++ b/arch/m68k/coldfire/m5441x.c
> @@ -52,7 +52,7 @@ DEFINE_CLK(0, "mcfssi.0", 47, MCF_CLK);
> DEFINE_CLK(0, "pll.0", 48, MCF_CLK);
> DEFINE_CLK(0, "mcfrng.0", 49, MCF_CLK);
> DEFINE_CLK(0, "mcfssi.1", 50, MCF_CLK);
> -DEFINE_CLK(0, "mcfsdhc.0", 51, MCF_CLK);
> +DEFINE_CLK(0, "sdhci-esdhc-mcf.0", 51, MCF_CLK);
> DEFINE_CLK(0, "enet-fec.0", 53, MCF_CLK);
> DEFINE_CLK(0, "enet-fec.1", 54, MCF_CLK);
> DEFINE_CLK(0, "switch.0", 55, MCF_CLK);
> @@ -74,6 +74,10 @@ DEFINE_CLK(1, "mcfpwm.0", 34, MCF_BUSCLK);
> DEFINE_CLK(1, "sys.0", 36, MCF_BUSCLK);
> DEFINE_CLK(1, "gpio.0", 37, MCF_BUSCLK);
>
> +DEFINE_CLK(2, "ipg.0", 0, MCF_CLK);
> +DEFINE_CLK(2, "ahb.0", 1, MCF_CLK);
> +DEFINE_CLK(2, "per.0", 2, MCF_CLK);
> +
> struct clk *mcf_clks[] = {
> &__clk_0_2,
> &__clk_0_8,
> @@ -131,6 +135,11 @@ struct clk *mcf_clks[] = {
> &__clk_1_34,
> &__clk_1_36,
> &__clk_1_37,
> +
> + &__clk_2_0,
> + &__clk_2_1,
> + &__clk_2_2,
> +
> NULL,
> };
>
> @@ -151,6 +160,7 @@ static struct clk * const enable_clks[] __initconst = {
> &__clk_0_33, /* pit.1 */
> &__clk_0_37, /* eport */
> &__clk_0_48, /* pll */
> + &__clk_0_51, /* esdhc */
>
> &__clk_1_36, /* CCM/reset module/Power management */
> &__clk_1_37, /* gpio */
> diff --git a/arch/m68k/include/asm/m5441xsim.h b/arch/m68k/include/asm/m5441xsim.h
> index 4892f314ff38..750555a6fa87 100644
> --- a/arch/m68k/include/asm/m5441xsim.h
> +++ b/arch/m68k/include/asm/m5441xsim.h
> @@ -278,6 +278,17 @@
> #define MCFGPIO_IRQ_VECBASE (MCFINT_VECBASE - MCFGPIO_IRQ_MIN)
> #define MCFGPIO_PIN_MAX 87
>
> +/*********************************************************************
> + *
> + * Phase Locked Loop (PLL)
> + *
> + *********************************************************************/
> +
> +/* Register read/write macros */
> +#define MCF_PLL_CR 0xFC0C0000
> +#define MCF_PLL_DR 0xFC0C0004
> +#define MCF_PLL_SR 0xFC0C0008
> +
> /*
> * DSPI module.
> */
> @@ -298,5 +309,13 @@
> #define MCFEDMA_IRQ_INTR16 (MCFINT1_VECBASE + MCFEDMA_EDMA_INTR16)
> #define MCFEDMA_IRQ_INTR56 (MCFINT2_VECBASE + MCFEDMA_EDMA_INTR56)
> #define MCFEDMA_IRQ_ERR (MCFINT0_VECBASE + MCFINT0_EDMA_ERR)
> +/*
> + * esdhc module.
> + */
> +#define MCFSDHC_BASE 0xfc0cc000
> +#define MCFSDHC_SIZE 256
> +#define MCFINT2_SDHC 31
> +#define MCF_IRQ_SDHC (MCFINT2_VECBASE + MCFINT2_SDHC)
> +#define MCFSDHC_CLK (MCFSDHC_BASE + 0x2c)
>
> #endif /* m5441xsim_h */
> diff --git a/arch/m68k/include/asm/mcfclk.h b/arch/m68k/include/asm/mcfclk.h
> index 0aca504fae31..722627e06d66 100644
> --- a/arch/m68k/include/asm/mcfclk.h
> +++ b/arch/m68k/include/asm/mcfclk.h
> @@ -30,6 +30,8 @@ extern struct clk_ops clk_ops0;
> extern struct clk_ops clk_ops1;
> #endif /* MCFPM_PPMCR1 */
>
> +extern struct clk_ops clk_ops2;
> +
> #define DEFINE_CLK(clk_bank, clk_name, clk_slot, clk_rate) \
> static struct clk __clk_##clk_bank##_##clk_slot = { \
> .name = clk_name, \
> diff --git a/include/linux/platform_data/mmc-esdhc-mcf.h b/include/linux/platform_data/mmc-esdhc-mcf.h
> new file mode 100644
> index 000000000000..85cb786a62fe
> --- /dev/null
> +++ b/include/linux/platform_data/mmc-esdhc-mcf.h
> @@ -0,0 +1,17 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +
> +#ifndef __LINUX_PLATFORM_DATA_MCF_ESDHC_H__
> +#define __LINUX_PLATFORM_DATA_MCF_ESDHC_H__
> +
> +enum cd_types {
> + ESDHC_CD_NONE, /* no CD, neither controller nor gpio */
> + ESDHC_CD_CONTROLLER, /* mmc controller internal CD */
> + ESDHC_CD_PERMANENT, /* no CD, card permanently wired to host */
> +};
> +
> +struct mcf_esdhc_platform_data {
> + int max_bus_width;
> + int cd_type;
> +};
> +
> +#endif /* __LINUX_PLATFORM_DATA_MCF_ESDHC_H__ */
> --
> 2.26.0
>
next prev parent reply other threads:[~2020-05-07 9:14 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-01 23:59 [PATCH v3 1/3] m68k: mcf5441x: add support for esdhc mmc controller Angelo Dureghello
2020-05-01 23:59 ` [PATCH v3 2/3] mmc: sdhci: add quirks for be to le byte swapping Angelo Dureghello
2020-05-01 23:59 ` [PATCH v3 3/3] mmc: host: add Coldfire esdhc support Angelo Dureghello
2020-05-07 9:13 ` Ulf Hansson [this message]
2020-05-07 9:23 ` [PATCH v3 1/3] m68k: mcf5441x: add support for esdhc mmc controller Geert Uytterhoeven
2020-05-12 15:09 ` Greg Ungerer
2020-05-13 11:59 ` Ulf Hansson
2020-05-13 12:24 ` Greg Ungerer
2020-05-12 15:06 ` Greg Ungerer
2020-05-12 18:05 ` Angelo Dureghello
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAPDyKFoLpMTQD+3SnXBNnqVLBMKDf6y=3X+MoPep42SCiQ6+TQ@mail.gmail.com' \
--to=ulf.hansson@linaro.org \
--cc=adrian.hunter@intel.com \
--cc=angelo.dureghello@timesys.com \
--cc=geert@linux-m68k.org \
--cc=linux-m68k@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).