linux-m68k.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
To: Max Staudt <max@enpas.org>
Cc: axboe@kernel.dk, linux-ide@vger.kernel.org,
	linux-m68k@vger.kernel.org, linux-kernel@vger.kernel.org,
	glaubitz@physik.fu-berlin.de, schmitzmic@gmail.com,
	geert@linux-m68k.org
Subject: Re: [PATCH v7] ata/pata_buddha: Probe via modalias instead of initcall
Date: Fri, 23 Aug 2019 13:18:33 +0200	[thread overview]
Message-ID: <a7f20fbb-bb28-d65f-76d1-fd0543902cd8@samsung.com> (raw)
In-Reply-To: <20190823104911.6840-1-max@enpas.org>


On 8/23/19 12:49 PM, Max Staudt wrote:
> Up until now, the pata_buddha driver would only check for cards on
> initcall time. Now, the kernel will call its probe function as soon
> as a compatible card is detected.
> 
> v7: Removed suppress_bind_attrs that slipped in
> 
> v6: Only do the drvdata workaround for X-Surf (remove breaks otherwise)
>     Style
> 
> v5: Remove module_exit(): There's no good way to handle the X-Surf hack.
>     Also include a workaround to save X-Surf's drvdata in case zorro8390
>     is active.
> 
> v4: Clean up pata_buddha_probe() by using ent->driver_data.
>     Support X-Surf via late_initcall()
> 
> v3: Clean up devm_*, implement device removal.
> 
> v2: Rename 'zdev' to 'z' to make the patch easy to analyse with
>     git diff --ignore-space-change
> 
> Signed-off-by: Max Staudt <max@enpas.org>

Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>

Best regards,
--
Bartlomiej Zolnierkiewicz
Samsung R&D Institute Poland
Samsung Electronics

> ---
>  drivers/ata/pata_buddha.c | 228 +++++++++++++++++++++++++++-------------------
>  1 file changed, 135 insertions(+), 93 deletions(-)
> 
> diff --git a/drivers/ata/pata_buddha.c b/drivers/ata/pata_buddha.c
> index 11a8044ff..27d4c417f 100644
> --- a/drivers/ata/pata_buddha.c
> +++ b/drivers/ata/pata_buddha.c
> @@ -18,7 +18,9 @@
>  #include <linux/kernel.h>
>  #include <linux/libata.h>
>  #include <linux/mm.h>
> +#include <linux/mod_devicetable.h>
>  #include <linux/module.h>
> +#include <linux/types.h>
>  #include <linux/zorro.h>
>  #include <scsi/scsi_cmnd.h>
>  #include <scsi/scsi_host.h>
> @@ -29,7 +31,7 @@
>  #include <asm/setup.h>
>  
>  #define DRV_NAME "pata_buddha"
> -#define DRV_VERSION "0.1.0"
> +#define DRV_VERSION "0.1.1"
>  
>  #define BUDDHA_BASE1	0x800
>  #define BUDDHA_BASE2	0xa00
> @@ -47,11 +49,11 @@ enum {
>  	BOARD_XSURF
>  };
>  
> -static unsigned int buddha_bases[3] __initdata = {
> +static unsigned int buddha_bases[3] = {
>  	BUDDHA_BASE1, BUDDHA_BASE2, BUDDHA_BASE3
>  };
>  
> -static unsigned int xsurf_bases[2] __initdata = {
> +static unsigned int xsurf_bases[2] = {
>  	XSURF_BASE1, XSURF_BASE2
>  };
>  
> @@ -145,111 +147,151 @@ static struct ata_port_operations pata_xsurf_ops = {
>  	.set_mode	= pata_buddha_set_mode,
>  };
>  
> -static int __init pata_buddha_init_one(void)
> +static int pata_buddha_probe(struct zorro_dev *z,
> +			     const struct zorro_device_id *ent)
>  {
> -	struct zorro_dev *z = NULL;
> +	static const char * const board_name[] = {
> +		"Buddha", "Catweasel", "X-Surf"
> +	};
> +	struct ata_host *host;
> +	void __iomem *buddha_board;
> +	unsigned long board;
> +	unsigned int type = ent->driver_data;
> +	unsigned int nr_ports = (type == BOARD_CATWEASEL) ? 3 : 2;
> +	void *old_drvdata;
> +	int i;
> +
> +	dev_info(&z->dev, "%s IDE controller\n", board_name[type]);
> +
> +	board = z->resource.start;
> +
> +	if (type != BOARD_XSURF) {
> +		if (!devm_request_mem_region(&z->dev,
> +					     board + BUDDHA_BASE1,
> +					     0x800, DRV_NAME))
> +			return -ENXIO;
> +	} else {
> +		if (!devm_request_mem_region(&z->dev,
> +					     board + XSURF_BASE1,
> +					     0x1000, DRV_NAME))
> +			return -ENXIO;
> +		if (!devm_request_mem_region(&z->dev,
> +					     board + XSURF_BASE2,
> +					     0x1000, DRV_NAME)) {
> +		}
> +	}
> +
> +	/* Workaround for X-Surf: Save drvdata in case zorro8390 has set it */
> +	if (type == BOARD_XSURF)
> +		old_drvdata = dev_get_drvdata(&z->dev);
> +
> +	/* allocate host */
> +	host = ata_host_alloc(&z->dev, nr_ports);
> +	if (type == BOARD_XSURF)
> +		dev_set_drvdata(&z->dev, old_drvdata);
> +	if (!host)
> +		return -ENXIO;
> +
> +	buddha_board = ZTWO_VADDR(board);
> +
> +	/* enable the board IRQ on Buddha/Catweasel */
> +	if (type != BOARD_XSURF)
> +		z_writeb(0, buddha_board + BUDDHA_IRQ_MR);
>  
> -	while ((z = zorro_find_device(ZORRO_WILDCARD, z))) {
> -		static const char *board_name[]
> -			= { "Buddha", "Catweasel", "X-Surf" };
> -		struct ata_host *host;
> -		void __iomem *buddha_board;
> -		unsigned long board;
> -		unsigned int type, nr_ports = 2;
> -		int i;
> -
> -		if (z->id == ZORRO_PROD_INDIVIDUAL_COMPUTERS_BUDDHA) {
> -			type = BOARD_BUDDHA;
> -		} else if (z->id == ZORRO_PROD_INDIVIDUAL_COMPUTERS_CATWEASEL) {
> -			type = BOARD_CATWEASEL;
> -			nr_ports++;
> -		} else if (z->id == ZORRO_PROD_INDIVIDUAL_COMPUTERS_X_SURF) {
> -			type = BOARD_XSURF;
> -		} else
> -			continue;
> -
> -		dev_info(&z->dev, "%s IDE controller\n", board_name[type]);
> -
> -		board = z->resource.start;
> +	for (i = 0; i < nr_ports; i++) {
> +		struct ata_port *ap = host->ports[i];
> +		void __iomem *base, *irqport;
> +		unsigned long ctl = 0;
>  
>  		if (type != BOARD_XSURF) {
> -			if (!devm_request_mem_region(&z->dev,
> -						     board + BUDDHA_BASE1,
> -						     0x800, DRV_NAME))
> -				continue;
> +			ap->ops = &pata_buddha_ops;
> +			base = buddha_board + buddha_bases[i];
> +			ctl = BUDDHA_CONTROL;
> +			irqport = buddha_board + BUDDHA_IRQ + i * 0x40;
>  		} else {
> -			if (!devm_request_mem_region(&z->dev,
> -						     board + XSURF_BASE1,
> -						     0x1000, DRV_NAME))
> -				continue;
> -			if (!devm_request_mem_region(&z->dev,
> -						     board + XSURF_BASE2,
> -						     0x1000, DRV_NAME))
> -				continue;
> +			ap->ops = &pata_xsurf_ops;
> +			base = buddha_board + xsurf_bases[i];
> +			/* X-Surf has no CS1* (Control/AltStat) */
> +			irqport = buddha_board + XSURF_IRQ;
>  		}
>  
> -		/* allocate host */
> -		host = ata_host_alloc(&z->dev, nr_ports);
> -		if (!host)
> -			continue;
> -
> -		buddha_board = ZTWO_VADDR(board);
> -
> -		/* enable the board IRQ on Buddha/Catweasel */
> -		if (type != BOARD_XSURF)
> -			z_writeb(0, buddha_board + BUDDHA_IRQ_MR);
> -
> -		for (i = 0; i < nr_ports; i++) {
> -			struct ata_port *ap = host->ports[i];
> -			void __iomem *base, *irqport;
> -			unsigned long ctl = 0;
> -
> -			if (type != BOARD_XSURF) {
> -				ap->ops = &pata_buddha_ops;
> -				base = buddha_board + buddha_bases[i];
> -				ctl = BUDDHA_CONTROL;
> -				irqport = buddha_board + BUDDHA_IRQ + i * 0x40;
> -			} else {
> -				ap->ops = &pata_xsurf_ops;
> -				base = buddha_board + xsurf_bases[i];
> -				/* X-Surf has no CS1* (Control/AltStat) */
> -				irqport = buddha_board + XSURF_IRQ;
> -			}
> -
> -			ap->pio_mask = ATA_PIO4;
> -			ap->flags |= ATA_FLAG_SLAVE_POSS | ATA_FLAG_NO_IORDY;
> -
> -			ap->ioaddr.data_addr		= base;
> -			ap->ioaddr.error_addr		= base + 2 + 1 * 4;
> -			ap->ioaddr.feature_addr		= base + 2 + 1 * 4;
> -			ap->ioaddr.nsect_addr		= base + 2 + 2 * 4;
> -			ap->ioaddr.lbal_addr		= base + 2 + 3 * 4;
> -			ap->ioaddr.lbam_addr		= base + 2 + 4 * 4;
> -			ap->ioaddr.lbah_addr		= base + 2 + 5 * 4;
> -			ap->ioaddr.device_addr		= base + 2 + 6 * 4;
> -			ap->ioaddr.status_addr		= base + 2 + 7 * 4;
> -			ap->ioaddr.command_addr		= base + 2 + 7 * 4;
> -
> -			if (ctl) {
> -				ap->ioaddr.altstatus_addr = base + ctl;
> -				ap->ioaddr.ctl_addr	  = base + ctl;
> -			}
> -
> -			ap->private_data = (void *)irqport;
> -
> -			ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", board,
> -				      ctl ? board + buddha_bases[i] + ctl : 0);
> +		ap->pio_mask = ATA_PIO4;
> +		ap->flags |= ATA_FLAG_SLAVE_POSS | ATA_FLAG_NO_IORDY;
> +
> +		ap->ioaddr.data_addr		= base;
> +		ap->ioaddr.error_addr		= base + 2 + 1 * 4;
> +		ap->ioaddr.feature_addr		= base + 2 + 1 * 4;
> +		ap->ioaddr.nsect_addr		= base + 2 + 2 * 4;
> +		ap->ioaddr.lbal_addr		= base + 2 + 3 * 4;
> +		ap->ioaddr.lbam_addr		= base + 2 + 4 * 4;
> +		ap->ioaddr.lbah_addr		= base + 2 + 5 * 4;
> +		ap->ioaddr.device_addr		= base + 2 + 6 * 4;
> +		ap->ioaddr.status_addr		= base + 2 + 7 * 4;
> +		ap->ioaddr.command_addr		= base + 2 + 7 * 4;
> +
> +		if (ctl) {
> +			ap->ioaddr.altstatus_addr = base + ctl;
> +			ap->ioaddr.ctl_addr	  = base + ctl;
>  		}
>  
> -		ata_host_activate(host, IRQ_AMIGA_PORTS, ata_sff_interrupt,
> -				  IRQF_SHARED, &pata_buddha_sht);
> +		ap->private_data = (void *)irqport;
>  
> +		ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", board,
> +			      ctl ? board + buddha_bases[i] + ctl : 0);
>  	}
>  
> +	ata_host_activate(host, IRQ_AMIGA_PORTS, ata_sff_interrupt,
> +			  IRQF_SHARED, &pata_buddha_sht);
> +
>  	return 0;
>  }
>  
> -module_init(pata_buddha_init_one);
> +static void pata_buddha_remove(struct zorro_dev *z)
> +{
> +	struct ata_host *host = dev_get_drvdata(&z->dev);
> +
> +	ata_host_detach(host);
> +}
> +
> +static const struct zorro_device_id pata_buddha_zorro_tbl[] = {
> +	{ ZORRO_PROD_INDIVIDUAL_COMPUTERS_BUDDHA, BOARD_BUDDHA},
> +	{ ZORRO_PROD_INDIVIDUAL_COMPUTERS_CATWEASEL, BOARD_CATWEASEL},
> +	{ 0 }
> +};
> +MODULE_DEVICE_TABLE(zorro, pata_buddha_zorro_tbl);
> +
> +static struct zorro_driver pata_buddha_driver = {
> +	.name           = "pata_buddha",
> +	.id_table       = pata_buddha_zorro_tbl,
> +	.probe          = pata_buddha_probe,
> +	.remove         = pata_buddha_remove,
> +};
> +
> +/*
> + * We cannot have a modalias for X-Surf boards, as it competes with the
> + * zorro8390 network driver. As a stopgap measure until we have proper
> + * MFD support for this board, we manually attach to it late after Zorro
> + * has enumerated its boards.
> + */
> +static int __init pata_buddha_late_init(void)
> +{
> +	struct zorro_dev *z = NULL;
> +
> +	/* Auto-bind to regular boards */
> +	zorro_register_driver(&pata_buddha_driver);
> +
> +	/* Manually bind to all X-Surf boards */
> +	while ((z = zorro_find_device(ZORRO_PROD_INDIVIDUAL_COMPUTERS_X_SURF, z))) {
> +		static struct zorro_device_id xsurf_ent = {
> +			ZORRO_PROD_INDIVIDUAL_COMPUTERS_X_SURF, BOARD_XSURF
> +		};
> +
> +		pata_buddha_probe(z, &xsurf_ent);
> +	}
> +
> +	return 0;
> +}
> +late_initcall(pata_buddha_late_init);
>  
>  MODULE_AUTHOR("Bartlomiej Zolnierkiewicz");
>  MODULE_DESCRIPTION("low-level driver for Buddha/Catweasel/X-Surf PATA");

  reply	other threads:[~2019-08-23 11:18 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <CGME20190823104917epcas2p235985fff8eaa4b0822f1c056068ff2b7@epcas2p2.samsung.com>
2019-08-23 10:49 ` Max Staudt
2019-08-23 11:18   ` Bartlomiej Zolnierkiewicz [this message]
2019-08-23 12:59   ` Jens Axboe
2019-08-23 13:03     ` Max Staudt

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=a7f20fbb-bb28-d65f-76d1-fd0543902cd8@samsung.com \
    --to=b.zolnierkie@samsung.com \
    --cc=axboe@kernel.dk \
    --cc=geert@linux-m68k.org \
    --cc=glaubitz@physik.fu-berlin.de \
    --cc=linux-ide@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-m68k@vger.kernel.org \
    --cc=max@enpas.org \
    --cc=schmitzmic@gmail.com \
    --subject='Re: [PATCH v7] ata/pata_buddha: Probe via modalias instead of initcall' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).