* Re: [PATCH 1/3] [v2] powerpc: mac: fix rtc read/write functions
[not found] ` <CA+7wUsyN_gru4rW0y3ZzXzYwhfaA=uHKaOG=z5bprnYq6oVfMg@mail.gmail.com>
@ 2018-07-01 15:47 ` Meelis Roos
2018-07-09 21:31 ` Arnd Bergmann
0 siblings, 1 reply; 3+ messages in thread
From: Meelis Roos @ 2018-07-01 15:47 UTC (permalink / raw)
To: Mathieu Malaterre
Cc: Arnd Bergmann, Paul Mackerras, Michael Ellerman,
Geert Uytterhoeven, funaho, Benjamin Herrenschmidt, gerg,
linux-m68k, linuxppc-dev, LKML, y2038, schwab
A patch for the subject is now upstream. That made me finally take some
time to test it on my PowerMac G4. Tha date is OK but I get two warnings
with backtrace on bootup. Full dmesg below.
[ 0.000000] Total memory = 1024MB; using 2048kB for hash table (at (ptrval))
[ 0.000000] RAM mapped without BATs
[ 0.000000] Linux version 4.18.0-rc2-00223-g1904148a361a (mroos@pohl) (gcc version 7.3.0 (Debian 7.3.0-24)) #88 Sun Jul 1 01:39:01 EEST 2018
[ 0.000000] Found UniNorth memory controller & host bridge @ 0xf8000000 revision: 0x11
[ 0.000000] Mapped at 0xff7c0000
[ 0.000000] Found a Keylargo mac-io controller, rev: 3, mapped at 0x(ptrval)
[ 0.000000] Processor NAP mode on idle enabled.
[ 0.000000] PowerMac motherboard: PowerMac G4 Silver
[ 0.000000] Using PowerMac machine description
[ 0.000000] bootconsole [udbg0] enabled
[ 0.000000] -----------------------------------------------------
[ 0.000000] Hash_size = 0x200000
[ 0.000000] phys_mem_size = 0x40000000
[ 0.000000] dcache_bsize = 0x20
[ 0.000000] icache_bsize = 0x20
[ 0.000000] cpu_features = 0x000000000401a00a
[ 0.000000] possible = 0x000000002f7ff04b
[ 0.000000] always = 0x0000000000000000
[ 0.000000] cpu_user_features = 0x9c000001 0x00000000
[ 0.000000] mmu_features = 0x00000001
[ 0.000000] Hash = 0x(ptrval)
[ 0.000000] Hash_mask = 0x7fff
[ 0.000000] -----------------------------------------------------
[ 0.000000] Found UniNorth PCI host bridge at 0x00000000f0000000. Firmware bus number: 0->0
[ 0.000000] PCI host bridge /pci@f0000000 ranges:
[ 0.000000] MEM 0x00000000f1000000..0x00000000f1ffffff -> 0x00000000f1000000
[ 0.000000] IO 0x00000000f0000000..0x00000000f07fffff -> 0x0000000000000000
[ 0.000000] MEM 0x0000000090000000..0x000000009fffffff -> 0x0000000090000000
[ 0.000000] Found UniNorth PCI host bridge at 0x00000000f2000000. Firmware bus number: 0->0
[ 0.000000] PCI host bridge /pci@f2000000 (primary) ranges:
[ 0.000000] MEM 0x00000000f3000000..0x00000000f3ffffff -> 0x00000000f3000000
[ 0.000000] IO 0x00000000f2000000..0x00000000f27fffff -> 0x0000000000000000
[ 0.000000] MEM 0x0000000080000000..0x000000008fffffff -> 0x0000000080000000
[ 0.000000] Found UniNorth PCI host bridge at 0x00000000f4000000. Firmware bus number: 0->0
[ 0.000000] PCI host bridge /pci@f4000000 ranges:
[ 0.000000] MEM 0x00000000f5000000..0x00000000f5ffffff -> 0x00000000f5000000
[ 0.000000] IO 0x00000000f4000000..0x00000000f47fffff -> 0x0000000000000000
[ 0.000000] via-pmu: Server Mode is disabled
[ 0.000000] PMU driver v2 initialized for Core99, firmware: 0c
[ 0.000000] nvram: Checking bank 0...
[ 0.000000] nvram: gen0=134, gen1=135
[ 0.000000] nvram: Active bank is: 1
[ 0.000000] nvram: OF partition at 0x210
[ 0.000000] nvram: XP partition at 0x1220
[ 0.000000] nvram: NR partition at 0x1320
[ 0.000000] Top of RAM: 0x40000000, Total RAM: 0x40000000
[ 0.000000] Memory hole size: 0MB
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x000000002fffffff]
[ 0.000000] Normal empty
[ 0.000000] HighMem [mem 0x0000000030000000-0x000000003fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000003fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000003fffffff]
[ 0.000000] On node 0 totalpages: 262144
[ 0.000000] DMA zone: 1536 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 196608 pages, LIFO batch:31
[ 0.000000] HighMem zone: 65536 pages, LIFO batch:15
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 260608
[ 0.000000] Kernel command line: root=/dev/sda3 ro
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 1029696K/1048576K available (5136K kernel code, 228K rwdata, 996K rodata, 208K init, 255K bss, 18880K reserved, 0K cma-reserved, 262144K highmem)
[ 0.000000] Kernel virtual memory layout:
[ 0.000000] * 0xfffcf000..0xfffff000 : fixmap
[ 0.000000] * 0xff800000..0xffc00000 : highmem PTEs
[ 0.000000] * 0xfded8000..0xff800000 : early ioremap
[ 0.000000] * 0xf1000000..0xfded8000 : vmalloc & ioremap
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS: 512, nr_irqs: 512, preallocated irqs: 16
[ 0.000000] mpic: Resetting
[ 0.000000] mpic: Setting up MPIC " MPIC 1 " version 1.2 at 80040000, max 1 CPUs
[ 0.000000] mpic: ISU size: 64, shift: 6, mask: 3f
[ 0.000000] mpic: Initializing for 64 sources
[ 0.000000] GMT Delta read from XPRAM: 120 minutes, DST: on
[ 0.000000] WARNING: CPU: 0 PID: 0 at arch/powerpc/platforms/powermac/time.c:154 pmu_get_time+0x7c/0xc8
[ 0.000000] Modules linked in:
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.18.0-rc2-00223-g1904148a361a #88
[ 0.000000] NIP: c0021354 LR: c0021308 CTR: 00000000
[ 0.000000] REGS: c0659df0 TRAP: 0700 Not tainted (4.18.0-rc2-00223-g1904148a361a)
[ 0.000000] MSR: 00021032 <ME,IR,DR,RI> CR: 48000222 XER: 20000000
[ 0.000000]
GPR00: c0021308 c0659ea0 c0635320 00000000 00d70298 00000004 00000001 00000098
GPR08: 00d70000 00000001 00000200 c06a0000 28000228 00000000 006cf290 006cf738
GPR16: ffbc1700 00000000 00000000 0076b855 006d6594 0013da24 009f0028 40140000
GPR24: 00000000 006ac000 efff44c0 c06293ec c065e020 c06293dc c066c4e4 c0659f78
[ 0.000000] NIP [c0021354] pmu_get_time+0x7c/0xc8
[ 0.000000] LR [c0021308] pmu_get_time+0x30/0xc8
[ 0.000000] Call Trace:
[ 0.000000] [c0659ea0] [c0021308] pmu_get_time+0x30/0xc8 (unreliable)
[ 0.000000] [c0659f10] [c000c428] read_persistent_clock64+0xc8/0x13c
[ 0.000000] [c0659f50] [c060e288] timekeeping_init+0x1c/0x24c
[ 0.000000] [c0659fc0] [c06020d8] start_kernel+0x2a0/0x38c
[ 0.000000] [c0659ff0] [00003444] 0x3444
[ 0.000000] Instruction dump:
[ 0.000000] 8941002e 5484c00e 5508801e 88e1002f 7c844214 554a402e 7c845214 7c843a14
[ 0.000000] 7d244810 7d294910 7d2948f8 552907fe <0f090000> 3d2083da 80010074 38210070
[ 0.000000] random: get_random_bytes called from print_oops_end_marker+0x58/0x7c with crng_init=0
[ 0.000000] ---[ end trace 2e01ad9337fe08fa ]---
[ 0.000000] time_init: decrementer frequency = 33.290001 MHz
[ 0.000000] time_init: processor frequency = 533.333332 MHz
[ 0.000021] clocksource: timebase: mask: 0xffffffffffffffff max_cycles: 0x7ad7d595e, max_idle_ns: 440795202265 ns
[ 0.000697] clocksource: timebase mult[1e09ff2c] shift[24] registered
[ 0.001075] clockevent: decrementer mult[885b18a] shift[32] cpu[0]
[ 0.001234] Console: colour dummy device 80x25
[ 0.001558] console [tty0] enabled
[ 0.001855] bootconsole [udbg0] disabled
[ 0.002335] pid_max: default: 32768 minimum: 301
[ 0.002463] Security Framework initialized
[ 0.002586] AppArmor: AppArmor initialized
[ 0.002676] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.002701] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.004649] devtmpfs: initialized
[ 0.005064] Duplicate name in PowerPC,G4@0, renamed to "l2-cache#1"
[ 0.007902] random: get_random_u32 called from bucket_table_alloc+0x90/0x1dc with crng_init=0
[ 0.008118] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.008143] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.008462] NET: Registered protocol family 16
[ 0.008890] audit: initializing netlink subsys (disabled)
[ 0.010008] KeyWest i2c @0xf8001003 irq 42 /uni-n@f8000000/i2c@f8001000
[ 0.010033] channel 0 bus <multibus>
[ 0.010042] channel 1 bus <multibus>
[ 0.010154] KeyWest i2c @0x80018000 irq 26 /pci@f2000000/mac-io@17/i2c@18000
[ 0.010183] channel 0 bus <multibus>
[ 0.010228] PMU i2c /pci@f2000000/mac-io@17/via-pmu@16000
[ 0.010240] channel 1 bus <multibus>
[ 0.010249] channel 2 bus <multibus>
[ 0.010670] PCI: Probing PCI hardware
[ 0.010826] PCI host bridge to bus 0000:00
[ 0.010860] pci_bus 0000:00: root bus resource [io 0x802000-0x1001fff] (bus address [0x0000-0x7fffff])
[ 0.010886] pci_bus 0000:00: root bus resource [mem 0xf1000000-0xf1ffffff]
[ 0.010906] pci_bus 0000:00: root bus resource [mem 0x90000000-0x9fffffff]
[ 0.010928] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.010950] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to ff
[ 0.011456] pci 0000:00:0b.0: [106b:002d] type 00 class 0x060000
[ 0.011929] pci 0000:00:10.0: [1002:5046] type 00 class 0x030000
[ 0.011960] pci 0000:00:10.0: reg 0x10: [mem 0x94000000-0x97ffffff pref]
[ 0.011973] pci 0000:00:10.0: reg 0x14: [io 0x802400-0x8024ff]
[ 0.011986] pci 0000:00:10.0: reg 0x18: [mem 0x90000000-0x90003fff]
[ 0.012014] pci 0000:00:10.0: reg 0x30: [mem 0x90020000-0x9003ffff pref]
[ 0.012058] pci 0000:00:10.0: supports D1
[ 0.012948] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[ 0.013076] PCI host bridge to bus 0001:10
[ 0.013105] pci_bus 0001:10: root bus resource [io 0x0000-0x7fffff]
[ 0.013125] pci_bus 0001:10: root bus resource [mem 0xf3000000-0xf3ffffff]
[ 0.013144] pci_bus 0001:10: root bus resource [mem 0x80000000-0x8fffffff]
[ 0.013193] pci_bus 0001:10: root bus resource [bus 10-ff]
[ 0.013214] pci_bus 0001:10: busn_res: [bus 10-ff] end is updated to ff
[ 0.013706] pci 0001:10:0b.0: [106b:002e] type 00 class 0x060000
[ 0.014424] pci 0001:10:17.0: [106b:0022] type 00 class 0xff0000
[ 0.014449] pci 0001:10:17.0: reg 0x10: [mem 0x80000000-0x8007ffff]
[ 0.014685] pci 0001:10:18.0: [106b:0019] type 00 class 0x0c0310
[ 0.014710] pci 0001:10:18.0: reg 0x10: [mem 0x80081000-0x80081fff]
[ 0.014944] pci 0001:10:19.0: [106b:0019] type 00 class 0x0c0310
[ 0.014970] pci 0001:10:19.0: reg 0x10: [mem 0x80080000-0x80080fff]
[ 0.015553] pci_bus 0001:10: busn_res: [bus 10-ff] end is updated to 10
[ 0.015671] PCI host bridge to bus 0002:20
[ 0.015702] pci_bus 0002:20: root bus resource [io 0xff7fe000-0xffffdfff] (bus address [0x0000-0x7fffff])
[ 0.015728] pci_bus 0002:20: root bus resource [mem 0xf5000000-0xf5ffffff]
[ 0.015749] pci_bus 0002:20: root bus resource [bus 20-ff]
[ 0.015768] pci_bus 0002:20: busn_res: [bus 20-ff] end is updated to ff
[ 0.016256] pci 0002:20:0b.0: [106b:002f] type 00 class 0x060000
[ 0.016581] pci 0002:20:0e.0: [11c1:5811] type 00 class 0x0c0010
[ 0.016606] pci 0002:20:0e.0: reg 0x10: [mem 0xf5000000-0xf5000fff]
[ 0.016658] pci 0002:20:0e.0: supports D1 D2
[ 0.016665] pci 0002:20:0e.0: PME# supported from D0 D1 D2 D3hot
[ 0.016875] pci 0002:20:0f.0: [106b:0021] type 00 class 0x020000
[ 0.016899] pci 0002:20:0f.0: reg 0x10: [mem 0xf5200000-0xf53fffff]
[ 0.016934] pci 0002:20:0f.0: reg 0x30: [mem 0xf5100000-0xf51fffff pref]
[ 0.017919] pci_bus 0002:20: busn_res: [bus 20-ff] end is updated to 20
[ 0.017991] PCI 0000:00 Cannot reserve Legacy IO [io 0x802000-0x802fff]
[ 0.018011] pci_bus 0000:00: resource 4 [io 0x802000-0x1001fff]
[ 0.018018] pci_bus 0000:00: resource 5 [mem 0xf1000000-0xf1ffffff]
[ 0.018025] pci_bus 0000:00: resource 6 [mem 0x90000000-0x9fffffff]
[ 0.018035] pci_bus 0001:10: resource 4 [io 0x0000-0x7fffff]
[ 0.018042] pci_bus 0001:10: resource 5 [mem 0xf3000000-0xf3ffffff]
[ 0.018049] pci_bus 0001:10: resource 6 [mem 0x80000000-0x8fffffff]
[ 0.018058] pci_bus 0002:20: resource 4 [io 0xff7fe000-0xffffdfff]
[ 0.018065] pci_bus 0002:20: resource 5 [mem 0xf5000000-0xf5ffffff]
[ 0.025369] audit: type=2000 audit(0.008:1): state=initialized audit_enabled=0 res=1
[ 0.034974] pci 0000:00:10.0: vgaarb: VGA device added: decodes=io+mem,owns=mem,locks=none
[ 0.035036] pci 0000:00:10.0: vgaarb: bridge control possible
[ 0.035055] pci 0000:00:10.0: vgaarb: setting as boot device (VGA legacy resources not available)
[ 0.035077] vgaarb: loaded
[ 0.035363] SCSI subsystem initialized
[ 0.035944] libata version 3.00 loaded.
[ 0.036069] usbcore: registered new interface driver usbfs
[ 0.036135] usbcore: registered new interface driver hub
[ 0.036205] usbcore: registered new device driver usb
[ 0.038128] clocksource: Switched to clocksource timebase
[ 0.038599] AppArmor: AppArmor Filesystem Enabled
[ 0.054259] NET: Registered protocol family 2
[ 0.054390] random: get_random_u32 called from neigh_hash_alloc+0x84/0xe0 with crng_init=0
[ 0.054948] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes)
[ 0.054995] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.055096] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.055183] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.055338] UDP hash table entries: 512 (order: 1, 8192 bytes)
[ 0.055387] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes)
[ 0.055564] NET: Registered protocol family 1
[ 0.055606] NET: Registered protocol family 44
[ 0.055700] pci 0001:10:18.0: enabling device (0000 -> 0002)
[ 0.114214] pci 0001:10:18.0: quirk_usb_early_handoff+0x0/0x8cc took 57137 usecs
[ 0.114270] pci 0001:10:19.0: enabling device (0000 -> 0002)
[ 0.174156] pci 0001:10:19.0: quirk_usb_early_handoff+0x0/0x8cc took 58481 usecs
[ 0.174197] PCI: CLS mismatch (32 != 1020), using 32 bytes
[ 0.174448] Thermal assist unit
[ 0.174453] using timers,
[ 0.174473] shrink_timer: 500 jiffies
[ 0.175062] Initialise system trusted keyrings
[ 0.175711] workingset: timestamp_bits=30 max_order=18 bucket_order=0
[ 0.194025] Key type asymmetric registered
[ 0.194079] Asymmetric key parser 'x509' registered
[ 0.194248] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.194278] io scheduler noop registered
[ 0.194291] io scheduler deadline registered
[ 0.194481] io scheduler cfq registered (default)
[ 0.195115] aty128fb 0000:00:10.0: enabling device (0086 -> 0087)
[ 0.195588] aty128fb 0000:00:10.0: Invalid PCI ROM header signature: expecting 0xaa55, got 0x1111
[ 0.195623] aty128fb: ROM failed to map
[ 0.195636] aty128fb: BIOS not located, guessing timings.
[ 0.195659] aty128fb: Rage128 PF PRO AGP [chip rev 0x1]
[ 0.195663] 16M 128-bit SDR SGRAM (1:1)
[ 0.212238] Console: switching to colour frame buffer device 128x48
[ 0.227164] fb0: ATY Rage128 frame buffer device on Rage128 PF PRO AGP
[ 0.227746] pmac_zilog: 0.6 (Benjamin Herrenschmidt <benh@kernel.crashing.org>)
[ 0.228033] Generic non-volatile memory driver v1.1
[ 0.233973] loop: module loaded
[ 0.234259] MacIO PCI driver attached to Keylargo chipset
[ 0.236238] 0.00013020:ch-a: ttyS0 at MMIO 0x80013020 (irq = 22, base_baud = 230400) is a Z85c30 ESCC - Serial port
[ 0.238389] 0.00013000:ch-b: ttyS1 at MMIO 0x80013000 (irq = 50, base_baud = 230400) is a Z85c30 ESCC - Serial port
[ 1.282145] pata-macio 0.0001f000:ata-4: Activating pata-macio chipset KeyLargo ATA-4, Apple bus ID 2
[ 1.283355] scsi host0: pata_macio
[ 1.283766] ata1: PATA max UDMA/66 irq 19
[ 1.445026] ata1.00: ATA-6: Maxtor 92049U3, BAC51JJ0, max UDMA/66
[ 1.445230] ata1.00: 40010544 sectors, multi 0: LBA
[ 1.450748] scsi 0:0:0:0: Direct-Access ATA Maxtor 92049U3 1JJ0 PQ: 0 ANSI: 5
[ 1.452076] sd 0:0:0:0: [sda] 40010544 512-byte logical blocks: (20.5 GB/19.1 GiB)
[ 1.452392] sd 0:0:0:0: [sda] Write Protect is off
[ 1.452557] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.452660] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.472546] sda: [mac] sda1 sda2 sda3 sda4
[ 1.474038] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.338145] pata-macio 0.00020000:ata-3: Activating pata-macio chipset KeyLargo ATA-3, Apple bus ID 0
[ 2.344877] scsi host1: pata_macio
[ 2.350832] ata2: PATA max MWDMA2 irq 20
[ 2.554418] ata2.00: ATAPI: MATSHITA CD-RW CW-7586, 1A17, max MWDMA2
[ 2.560218] ata2.01: ATAPI: IOMEGA ZIP 250 ATAPI, 41.S, max UDMA/33, CDB intr
[ 2.618851] scsi 1:0:0:0: CD-ROM MATSHITA CD-RW CW-7586 1A17 PQ: 0 ANSI: 5
[ 2.630676] scsi 1:0:1:0: Direct-Access IOMEGA ZIP 250 41.S PQ: 0 ANSI: 5
[ 2.671193] sd 1:0:1:0: [sdb] Attached SCSI removable disk
[ 3.394143] pata-macio 0.00021000:ata-3: Activating pata-macio chipset KeyLargo ATA-3, Apple bus ID 1
[ 3.401263] scsi host2: pata_macio
[ 3.407591] ata3: PATA max MWDMA2 irq 21
[ 3.413826] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.420094] ohci-pci: OHCI PCI platform driver
[ 3.426292] ohci-pci 0001:10:18.0: OHCI PCI host controller
[ 3.432457] ohci-pci 0001:10:18.0: new USB bus registered, assigned bus number 1
[ 3.438790] ohci-pci 0001:10:18.0: irq 27, io mem 0x80081000
[ 3.522135] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.18
[ 3.528544] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.534935] usb usb1: Product: OHCI PCI host controller
[ 3.541239] usb usb1: Manufacturer: Linux 4.18.0-rc2-00223-g1904148a361a ohci_hcd
[ 3.547669] usb usb1: SerialNumber: 0001:10:18.0
[ 3.554601] hub 1-0:1.0: USB hub found
[ 3.561194] hub 1-0:1.0: 2 ports detected
[ 3.568015] ohci-pci 0001:10:19.0: OHCI PCI host controller
[ 3.574418] ohci-pci 0001:10:19.0: new USB bus registered, assigned bus number 2
[ 3.580866] ohci-pci 0001:10:19.0: irq 28, io mem 0x80080000
[ 3.666142] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.18
[ 3.672533] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.678911] usb usb2: Product: OHCI PCI host controller
[ 3.685256] usb usb2: Manufacturer: Linux 4.18.0-rc2-00223-g1904148a361a ohci_hcd
[ 3.691597] usb usb2: SerialNumber: 0001:10:19.0
[ 3.698572] hub 2-0:1.0: USB hub found
[ 3.704984] hub 2-0:1.0: 2 ports detected
[ 3.711898] mousedev: PS/2 mouse device common for all mice
[ 3.718339] WARNING: CPU: 0 PID: 1 at arch/powerpc/platforms/powermac/time.c:154 pmu_get_time+0x7c/0xc8
[ 3.724661] Modules linked in:
[ 3.730901] CPU: 0 PID: 1 Comm: swapper Tainted: G W 4.18.0-rc2-00223-g1904148a361a #88
[ 3.737332] NIP: c0021354 LR: c0021308 CTR: 00000000
[ 3.743649] REGS: ef047b50 TRAP: 0700 Tainted: G W (4.18.0-rc2-00223-g1904148a361a)
[ 3.750136] MSR: 00029032 <EE,ME,IR,DR,RI> CR: 44000822 XER: 20000000
[ 3.756639]
GPR00: c0021308 ef047c00 ef048000 00000000 00d7029c 00000004 00000001 0000009c
GPR08: 00d70000 00000001 00000200 c06a0000 24000828 00000000 c0004c9c 00000000
GPR16: 00000000 00000000 00000000 00000000 00000000 00000000 c0670000 c0601a38
GPR24: 00000007 00000000 ef0ccf40 00000000 ef047cec ef273800 ef047cec ef047cec
[ 3.788482] NIP [c0021354] pmu_get_time+0x7c/0xc8
[ 3.794736] LR [c0021308] pmu_get_time+0x30/0xc8
[ 3.800944] Call Trace:
[ 3.807004] [ef047c00] [c0021308] pmu_get_time+0x30/0xc8 (unreliable)
[ 3.813217] [ef047c70] [c00213e8] pmac_get_rtc_time+0x28/0x40
[ 3.819357] [ef047c80] [c000bc04] rtc_generic_get_time+0x20/0x34
[ 3.825395] [ef047c90] [c03aca34] __rtc_read_time+0x5c/0xe0
[ 3.831290] [ef047ca0] [c03acafc] rtc_read_time+0x44/0x7c
[ 3.837184] [ef047cc0] [c03ad81c] __rtc_read_alarm+0x28/0x440
[ 3.843035] [ef047d30] [c03ac048] rtc_device_register+0x84/0x1b8
[ 3.848869] [ef047d80] [c03ac1e4] devm_rtc_device_register+0x68/0xe8
[ 3.854718] [ef047da0] [c061e1c8] generic_rtc_probe+0x2c/0x54
[ 3.860538] [ef047db0] [c03209b4] platform_drv_probe+0x4c/0xb8
[ 3.866355] [ef047dd0] [c031ed78] driver_probe_device+0x25c/0x35c
[ 3.872071] [ef047e00] [c031ef8c] __driver_attach+0x114/0x118
[ 3.877738] [ef047e20] [c031c960] bus_for_each_dev+0x80/0xc0
[ 3.883334] [ef047e50] [c031df18] bus_add_driver+0x144/0x258
[ 3.888857] [ef047e70] [c031f81c] driver_register+0x88/0x15c
[ 3.894317] [ef047e80] [c03210e0] __platform_driver_probe+0x84/0x13c
[ 3.899820] [ef047ea0] [c0004aa4] do_one_initcall+0x4c/0x1a8
[ 3.905364] [ef047f00] [c06022f0] kernel_init_freeable+0x12c/0x1f4
[ 3.910893] [ef047f30] [c0004cb4] kernel_init+0x18/0x130
[ 3.916367] [ef047f40] [c00121c4] ret_from_kernel_thread+0x14/0x1c
[ 3.921842] Instruction dump:
[ 3.927168] 8941002e 5484c00e 5508801e 88e1002f 7c844214 554a402e 7c845214 7c843a14
[ 3.932672] 7d244810 7d294910 7d2948f8 552907fe <0f090000> 3d2083da 80010074 38210070
[ 3.938214] ---[ end trace 2e01ad9337fe08fb ]---
[ 3.944429] rtc-generic rtc-generic: rtc core: registered rtc-generic as rtc0
[ 3.950813] NET: Registered protocol family 10
[ 3.956508] _warn_unseeded_randomness: 3 callbacks suppressed
[ 3.956530] random: get_random_u32 called from neigh_hash_alloc+0x84/0xe0 with crng_init=0
[ 3.969365] random: get_random_u32 called from bucket_table_alloc+0x90/0x1dc with crng_init=0
[ 3.975248] Segment Routing with IPv6
[ 3.980920] NET: Registered protocol family 17
[ 3.986625] drmem: No dynamic reconfiguration memory found
[ 3.992809] Loading compiled-in X.509 certificates
[ 3.998321] AppArmor: AppArmor sha1 policy hashing enabled
[ 4.003695] random: get_random_bytes called from prandom_seed_full_state+0x20/0x8c with crng_init=0
[ 4.009807] input: PMU as /devices/virtual/input/input0
[ 4.015320] console [netcon0] enabled
[ 4.020771] netconsole: network logging started
[ 4.026490] WARNING: CPU: 0 PID: 1 at arch/powerpc/platforms/powermac/time.c:154 pmu_get_time+0x7c/0xc8
[ 4.032261] Modules linked in:
[ 4.037878] CPU: 0 PID: 1 Comm: swapper Tainted: G W 4.18.0-rc2-00223-g1904148a361a #88
[ 4.043750] NIP: c0021354 LR: c0021308 CTR: 00000000
[ 4.049585] REGS: ef047cd0 TRAP: 0700 Tainted: G W (4.18.0-rc2-00223-g1904148a361a)
[ 4.055572] MSR: 00029032 <EE,ME,IR,DR,RI> CR: 44000222 XER: 20000000
[ 4.061620]
GPR00: c0021308 ef047d80 ef048000 00000000 00d7029c 00000004 00000001 0000009c
GPR08: 00d70000 00000001 00000200 c06a0000 24000228 00000000 c0004c9c 00000000
GPR16: 00000000 00000000 00000000 00000000 00000000 00000000 c0670000 c0601a38
GPR24: 00000008 c0630f18 c062a40c c05fc10c ef047e50 ef273800 ef047e50 ef047e50
[ 4.092393] NIP [c0021354] pmu_get_time+0x7c/0xc8
[ 4.098596] LR [c0021308] pmu_get_time+0x30/0xc8
[ 4.104779] Call Trace:
[ 4.110909] [ef047d80] [c0021308] pmu_get_time+0x30/0xc8 (unreliable)
[ 4.117209] [ef047df0] [c00213e8] pmac_get_rtc_time+0x28/0x40
[ 4.123470] [ef047e00] [c000bc04] rtc_generic_get_time+0x20/0x34
[ 4.129770] [ef047e10] [c03aca34] __rtc_read_time+0x5c/0xe0
[ 4.136060] [ef047e20] [c03acafc] rtc_read_time+0x44/0x7c
[ 4.142356] [ef047e40] [c061e000] rtc_hctosys+0x64/0x11c
[ 4.148616] [ef047ea0] [c0004aa4] do_one_initcall+0x4c/0x1a8
[ 4.154866] [ef047f00] [c06022f0] kernel_init_freeable+0x12c/0x1f4
[ 4.161123] [ef047f30] [c0004cb4] kernel_init+0x18/0x130
[ 4.167359] [ef047f40] [c00121c4] ret_from_kernel_thread+0x14/0x1c
[ 4.173610] Instruction dump:
[ 4.179766] 8941002e 5484c00e 5508801e 88e1002f 7c844214 554a402e 7c845214 7c843a14
[ 4.186076] 7d244810 7d294910 7d2948f8 552907fe <0f090000> 3d2083da 80010074 38210070
[ 4.192388] ---[ end trace 2e01ad9337fe08fd ]---
[ 4.198643] rtc-generic rtc-generic: hctosys: unable to read the hardware clock
[ 4.209046] EXT4-fs (sda3): mounting ext3 file system using the ext4 subsystem
[ 4.236629] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 4.243073] VFS: Mounted root (ext3 filesystem) readonly on device 8:3.
[ 4.260646] devtmpfs: mounted
[ 4.267211] Freeing unused kernel memory: 208K
[ 4.398178] usb 2-1: new full-speed USB device number 2 using ohci-pci
[ 4.629315] usb 2-1: New USB device found, idVendor=05ac, idProduct=1001, bcdDevice= 2.10
[ 4.635736] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.642038] usb 2-1: Product: Hub in Apple USB Keyboard
[ 4.648301] usb 2-1: Manufacturer: Alps Electric
[ 4.656332] hub 2-1:1.0: USB hub found
[ 4.663208] hub 2-1:1.0: 3 ports detected
[ 4.974155] usb 2-1.1: new low-speed USB device number 3 using ohci-pci
[ 5.104225] usb 2-1.1: New USB device found, idVendor=05ac, idProduct=0201, bcdDevice= 1.02
[ 5.110383] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.116265] usb 2-1.1: Product: Apple USB Keyboard
[ 5.122014] usb 2-1.1: Manufacturer: Alps Electric
[ 5.210159] usb 2-1.2: new low-speed USB device number 4 using ohci-pci
[ 5.242205] random: fast init done
[ 5.338230] usb 2-1.2: New USB device found, idVendor=05ac, idProduct=0301, bcdDevice= 5.02
[ 5.344013] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.349638] usb 2-1.2: Product: M4848
[ 5.355197] usb 2-1.2: Manufacturer: Logitech
[ 7.600059] systemd[1]: System time before build time, advancing clock.
[ 7.952523] systemd[1]: Failed to insert module 'autofs4': No such file or directory
[ 8.148253] systemd[1]: systemd 239 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 8.178244] systemd[1]: Detected architecture ppc.
[ 8.297863] systemd[1]: Set hostname to <pohl>.
[ 8.319596] _warn_unseeded_randomness: 7 callbacks suppressed
[ 8.319629] random: get_random_u32 called from bucket_table_alloc+0x90/0x1dc with crng_init=1
[ 8.456375] random: get_random_u32 called from arch_pick_mmap_layout+0xe8/0x160 with crng_init=1
[ 8.463131] random: get_random_u32 called from load_elf_binary+0x768/0x1214 with crng_init=1
[ 9.348994] _warn_unseeded_randomness: 67 callbacks suppressed
[ 9.349025] random: get_random_u32 called from arch_align_stack+0x44/0x64 with crng_init=1
[ 9.362283] random: get_random_u32 called from arch_randomize_brk+0x20/0x78 with crng_init=1
[ 9.893854] random: get_random_u32 called from arch_pick_mmap_layout+0xe8/0x160 with crng_init=1
[ 9.962756] random: crng init done
[ 9.969134] random: 5 get_random_xx warning(s) missed due to ratelimiting
[ 13.408566] systemd[1]: Listening on Syslog Socket.
[ 13.422964] systemd[1]: Listening on Journal Socket.
[ 13.436231] systemd[1]: Starting of Arbitrary Executable File Formats File System Automount Point not supported.
[ 13.525715] systemd[1]: Listening on udev Kernel Socket.
[ 13.540122] systemd[1]: Reached target Remote File Systems.
[ 13.554279] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 13.569207] systemd[1]: Listening on udev Control Socket.
[ 13.587771] systemd[1]: Starting udev Coldplug all Devices...
[ 13.606824] systemd[1]: Listening on Journal Audit Socket.
[ 13.626991] systemd[1]: Mounting Kernel Debug File System...
[ 15.424946] PowerMac i2c bus pmu 2 registered
[ 15.431134] PowerMac i2c bus pmu 1 registered
[ 15.436983] PowerMac i2c bus mac-io 0 registered
[ 15.442651] PowerMac i2c bus uni-n 1 registered
[ 15.448242] PowerMac i2c bus uni-n 0 registered
[ 15.879672] input: PowerMac Beep as /devices/pci0001:10/0001:10:17.0/input/input1
[ 16.008274] EXT4-fs (sda3): re-mounted. Opts: acl
[ 16.381033] systemd-journald[543]: Received request to flush runtime journal from PID 1
[ 19.281274] genirq: Flags mismatch irq 31. 00000001 (i2sbus: i2s-a (tx)) vs. 00000001 (PMac Output)
[ 19.422231] firewire_ohci 0002:20:0e.0: added OHCI v1.0 device as card 0, 8 IR + 8 IT contexts, quirks 0x0
[ 19.487853] Linux agpgart interface v0.103
[ 19.550217] sungem.c:v1.0 David S. Miller <davem@redhat.com>
[ 19.556595] gem 0002:20:0f.0 eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:03:93:48:0e:fe
[ 19.566755] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 19.610255] scsi 1:0:0:0: Attached scsi generic sg1 type 5
[ 19.617423] agpgart-uninorth 0000:00:0b.0: Apple UniNorth 1.5 chipset
[ 19.642340] agpgart-uninorth 0000:00:0b.0: configuring for size idx: 64
[ 19.665663] sd 1:0:1:0: Attached scsi generic sg2 type 0
[ 19.698818] sr 1:0:0:0: [sr0] scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
[ 19.704575] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 19.717067] agpgart-uninorth 0000:00:0b.0: AGP aperture is 256M @ 0x0
[ 19.762489] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 19.938493] firewire_core 0002:20:0e.0: created device fw0: GUID 000393fffe480efe, S400
[ 20.294101] hidraw: raw HID events driver (C) Jiri Kosina
[ 20.464381] usbcore: registered new interface driver usbhid
[ 20.470456] usbhid: USB HID core driver
[ 21.029892] input: Alps Electric Apple USB Keyboard as /devices/pci0001:10/0001:10:19.0/usb2/2-1/2-1.1/2-1.1:1.0/0003:05AC:0201.0001/input/input2
[ 21.103209] hid-generic 0003:05AC:0201.0001: input,hidraw0: USB HID v1.00 Keyboard [Alps Electric Apple USB Keyboard] on usb-0001:10:19.0-1.1/input0
[ 21.121248] input: Logitech M4848 as /devices/pci0001:10/0001:10:19.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:05AC:0301.0002/input/input3
[ 21.145442] hid-generic 0003:05AC:0301.0002: input,hidraw1: USB HID v1.00 Mouse [Logitech M4848] on usb-0001:10:19.0-1.2/input0
[ 23.026805] Adding 848984k swap on /dev/sda4. Priority:-2 extents:1 across:848984k
[ 33.034566] sungem_phy: PHY ID: 206053, addr: 0
[ 33.555712] gem 0002:20:0f.0 eth0: Found BCM5401 PHY
[ 33.561204] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 36.002364] gem 0002:20:0f.0 eth0: Link is up at 100 Mbps, full-duplex
[ 36.007833] gem 0002:20:0f.0 eth0: Pause is enabled (rxfifo: 10240 off: 7168 on: 5632)
[ 36.013215] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 43.522088] aty128fb 0000:00:10.0: Invalid PCI ROM header signature: expecting 0xaa55, got 0x1111
--
Meelis Roos (mroos@linux.ee)
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH 1/3] [v2] powerpc: mac: fix rtc read/write functions
2018-07-01 15:47 ` [PATCH 1/3] [v2] powerpc: mac: fix rtc read/write functions Meelis Roos
@ 2018-07-09 21:31 ` Arnd Bergmann
2018-07-10 1:18 ` Finn Thain
0 siblings, 1 reply; 3+ messages in thread
From: Arnd Bergmann @ 2018-07-09 21:31 UTC (permalink / raw)
To: Meelis Roos
Cc: linux-m68k, Mathieu Malaterre, Michael Ellerman, Andreas Schwab,
LKML, y2038 Mailman List, Paul Mackerras, Benjamin Herrenschmidt,
Geert Uytterhoeven, linuxppc-dev, Greg Ungerer, Joshua Thompson
On Sun, Jul 1, 2018 at 5:47 PM, Meelis Roos <mroos@linux.ee> wrote:
> A patch for the subject is now upstream. That made me finally take some
> time to test it on my PowerMac G4. Tha date is OK but I get two warnings
> with backtrace on bootup. Full dmesg below.
Thanks for testing this, and sorry for the slow reply.
> [ 4.026490] WARNING: CPU: 0 PID: 1 at arch/powerpc/platforms/powermac/time.c:154 pmu_get_time+0x7c/0xc8
> [ 4.032261] Modules linked in:
> [ 4.037878] CPU: 0 PID: 1 Comm: swapper Tainted: G W 4.18.0-rc2-00223-g1904148a361a #88
> [ 4.043750] NIP: c0021354 LR: c0021308 CTR: 00000000
> [ 4.049585] REGS: ef047cd0 TRAP: 0700 Tainted: G W (4.18.0-rc2-00223-g1904148a361a)
> [ 4.055572] MSR: 00029032 <EE,ME,IR,DR,RI> CR: 44000222 XER: 20000000
> [ 4.061620]
> GPR00: c0021308 ef047d80 ef048000 00000000 00d7029c 00000004 00000001 0000009c
> GPR08: 00d70000 00000001 00000200 c06a0000 24000228 00000000 c0004c9c 00000000
> GPR16: 00000000 00000000 00000000 00000000 00000000 00000000 c0670000 c0601a38
> GPR24: 00000008 c0630f18 c062a40c c05fc10c ef047e50 ef273800 ef047e50 ef047e50
> [ 4.092393] NIP [c0021354] pmu_get_time+0x7c/0xc8
> [ 4.098596] LR [c0021308] pmu_get_time+0x30/0xc8
I don't see how the WARN_ON() triggered unless the PMU time is
actually before 1970.
> [ 4.104779] Call Trace:
> [ 4.110909] [ef047d80] [c0021308] pmu_get_time+0x30/0xc8 (unreliable)
> [ 4.117209] [ef047df0] [c00213e8] pmac_get_rtc_time+0x28/0x40
> [ 4.123470] [ef047e00] [c000bc04] rtc_generic_get_time+0x20/0x34
> [ 4.129770] [ef047e10] [c03aca34] __rtc_read_time+0x5c/0xe0
> [ 4.136060] [ef047e20] [c03acafc] rtc_read_time+0x44/0x7c
> [ 4.142356] [ef047e40] [c061e000] rtc_hctosys+0x64/0x11c
> [ 4.148616] [ef047ea0] [c0004aa4] do_one_initcall+0x4c/0x1a8
> [ 4.154866] [ef047f00] [c06022f0] kernel_init_freeable+0x12c/0x1f4
> [ 4.161123] [ef047f30] [c0004cb4] kernel_init+0x18/0x130
> [ 4.167359] [ef047f40] [c00121c4] ret_from_kernel_thread+0x14/0x1c
> [ 4.173610] Instruction dump:
> [ 4.179766] 8941002e 5484c00e 5508801e 88e1002f 7c844214 554a402e 7c845214 7c843a14
> [ 4.186076] 7d244810 7d294910 7d2948f8 552907fe <0f090000> 3d2083da 80010074 38210070
> [ 4.192388] ---[ end trace 2e01ad9337fe08fd ]---
> [ 4.198643] rtc-generic rtc-generic: hctosys: unable to read the hardware clock
The last message here happens exactly in that case as well: tm_year is before
1970:
int rtc_valid_tm(struct rtc_time *tm)
{
if (tm->tm_year < 70
|| ((unsigned)tm->tm_mon) >= 12
|| tm->tm_mday < 1
|| tm->tm_mday > rtc_month_days(tm->tm_mon, tm->tm_year + 1900)
|| ((unsigned)tm->tm_hour) >= 24
|| ((unsigned)tm->tm_min) >= 60
|| ((unsigned)tm->tm_sec) >= 60)
return -EINVAL;
return 0;
}
The most likely explanation I have here is that the RTC was indeed set to an
incorrect date, either because of a depleted battery (not unlikely for
a ~15 year
old box) or because it was previously stored incorrectly. You say that the
time is correct, but that could also be the case if the machine is connected to
the network and synchronized using NTP. It should not have gotten the
time from the RTC after that error.
If you have the time to do another test, can you boot the machine with
its network disconnected, see if the warning persists (it may have been
repaired after the correct time got written into the RTC during shutdown),
what the output of 'sudo hwclock' is, and whether anything changes after
you set the correct time using 'hwclock --systohc' and reboot?
Arnd
_______________________________________________
Y2038 mailing list
Y2038@lists.linaro.org
https://lists.linaro.org/mailman/listinfo/y2038
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH 1/3] [v2] powerpc: mac: fix rtc read/write functions
2018-07-09 21:31 ` Arnd Bergmann
@ 2018-07-10 1:18 ` Finn Thain
0 siblings, 0 replies; 3+ messages in thread
From: Finn Thain @ 2018-07-10 1:18 UTC (permalink / raw)
To: Arnd Bergmann
Cc: linux-m68k, Mathieu Malaterre, Michael Ellerman, Meelis Roos,
LKML, y2038 Mailman List, Paul Mackerras, Benjamin Herrenschmidt,
Andreas Schwab, Geert Uytterhoeven, linuxppc-dev, Greg Ungerer,
Joshua Thompson
On Mon, 9 Jul 2018, Arnd Bergmann wrote:
>
> The most likely explanation I have here is that the RTC was indeed set
> to an incorrect date, either because of a depleted battery (not unlikely
> for a ~15 year old box) or because it was previously stored incorrectly.
The PowerMac stores the GMT offset in NVRAM, and this gets used to
initialize timezone_offset.
If timezone_offset was negative and now.tv_sec was zero, I think this
could store a 1969 date in the RTC:
int update_persistent_clock64(struct timespec64 now)
{
struct rtc_time tm;
if (!ppc_md.set_rtc_time)
return -ENODEV;
rtc_time64_to_tm(now.tv_sec + 1 + timezone_offset, &tm);
return ppc_md.set_rtc_time(&tm);
}
But maybe now.tv_sec can be shown to be greater than timezone_offset.
Then, what would happen when the timezone in /etc/localtime disagrees with
the timezone_offset stored in NVRAM (PRAM)?
Besides that, if the battery went flat, what use is a backtrace? Why not
scrap the WARN_ON()?
--
_______________________________________________
Y2038 mailing list
Y2038@lists.linaro.org
https://lists.linaro.org/mailman/listinfo/y2038
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2018-07-10 1:18 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <20180619140229.3615110-1-arnd@arndb.de>
[not found] ` <CA+7wUsyN_gru4rW0y3ZzXzYwhfaA=uHKaOG=z5bprnYq6oVfMg@mail.gmail.com>
2018-07-01 15:47 ` [PATCH 1/3] [v2] powerpc: mac: fix rtc read/write functions Meelis Roos
2018-07-09 21:31 ` Arnd Bergmann
2018-07-10 1:18 ` Finn Thain
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).