Linux-m68k Archive on lore.kernel.org
 help / color / Atom feed
From: Max Staudt <max@enpas.org>
To: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Linux I2C <linux-i2c@vger.kernel.org>,
	Wolfram Sang <wsa+renesas@sang-engineering.com>,
	Linux/m68k <linux-m68k@vger.kernel.org>,
	Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
	John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Subject: Re: [PATCH] i2c/busses: Add i2c-icy for I2C on m68k/Amiga
Date: Mon, 12 Aug 2019 13:48:41 +0200
Message-ID: <befbe9c2-b975-757e-5ebc-caec1f8987d7@enpas.org> (raw)
In-Reply-To: <CAMuHMdUum4Dubx8EOsSakaNfLp4-Yyzsutfkvb_+i5mqtOtkKw@mail.gmail.com>

On 08/12/2019 01:07 PM, Geert Uytterhoeven wrote:
>> It sets the sensor modes in the LTC2990 and enables the three sensors listed below. I should have clarified this.
>>
>> I tried to integrate this in the driver, but ltc2990 only allows reading this configuration out of a device tree. Is there a good way to fake a DT entry in the init function?
> 
> You can add platform_data support to the ltc2990 driver, and pass it
> through i2c_board_info.platform_data.

Thanks, that sounds good and I'll look into it.

Max

  reply index

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-11  4:32 Max Staudt
2019-08-11  4:40 ` Max Staudt
2019-08-12  9:37 ` Geert Uytterhoeven
2019-08-12 10:43   ` Max Staudt
2019-08-12 11:07     ` Geert Uytterhoeven
2019-08-12 11:48       ` Max Staudt [this message]
2019-08-12 22:21   ` Max Staudt
2019-08-13  6:53     ` Geert Uytterhoeven
2019-08-20  9:23 [PATCH v5 1/3] " Max
2019-08-20  9:27 ` [PATCH] " Max Staudt
2019-08-29 19:00   ` Wolfram Sang
2019-08-29 19:17     ` Max Staudt

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=befbe9c2-b975-757e-5ebc-caec1f8987d7@enpas.org \
    --to=max@enpas.org \
    --cc=geert@linux-m68k.org \
    --cc=glaubitz@physik.fu-berlin.de \
    --cc=linux-i2c@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-m68k@vger.kernel.org \
    --cc=wsa+renesas@sang-engineering.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-m68k Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-m68k/0 linux-m68k/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-m68k linux-m68k/ https://lore.kernel.org/linux-m68k \
		linux-m68k@vger.kernel.org linux-m68k@lists.linux-m68k.org
	public-inbox-index linux-m68k

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-m68k


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git