[PATCH] proc.5: tfix

[Jakub Wilk <jwilk@jwilk.net>]

Escape hyphens.

Signed-off-by: Jakub Wilk <jwilk@jwilk.net>
---
 man5/proc.5 | 192 ++++++++++++++++++++++++++--------------------------
 1 file changed, 96 insertions(+), 96 deletions(-)

diff --git a/man5/proc.5 b/man5/proc.5
index fa37731b7..a5dbad702 100644
--- a/man5/proc.5
+++ b/man5/proc.5
@@ -213,13 +213,13 @@ it resolves to the process's own
 .I /proc/[pid]
 directory.
 .TP
-.I /proc/thread-self
+.I /proc/thread\-self
 When a thread accesses this magic symbolic link,
 it resolves to the process's own
 .I /proc/self/task/[tid]
 directory.
 .TP
-.I /proc/[a-z]*
+.I /proc/[a\-z]*
 Various other files and subdirectories under
 .I /proc
 expose system-wide information.
@@ -788,9 +788,9 @@ An unprivileged process may lack permissions to open them, as in this example:
 .IP
 .in +4n
 .EX
-.RB "$" " echo test | sudo -u nobody cat"
+.RB "$" " echo test | sudo \-u nobody cat"
 test
-.RB "$" " echo test | sudo -u nobody cat /proc/self/fd/0"
+.RB "$" " echo test | sudo \-u nobody cat /proc/self/fd/0"
 cat: /proc/self/fd/0: Permission denied
 .EE
 .in
@@ -865,11 +865,11 @@ the following fields:
 pos:	0
 flags:	02
 mnt_id:	10
-eventfd-count:               40
+eventfd\-count:               40
 .EE
 .in
 .IP
-.I eventfd-count
+.I eventfd\-count
 is the current value of the eventfd counter, in hexadecimal.
 .IP
 For epoll file descriptors (see
@@ -940,8 +940,8 @@ the following fields:
 pos:	0
 flags:	00
 mnt_id:	11
-inotify wd:2 ino:7ef82a sdev:800001 mask:800afff ignored_mask:0 fhandle-bytes:8 fhandle-type:1 f_handle:2af87e00220ffd73
-inotify wd:1 ino:192627 sdev:800001 mask:800afff ignored_mask:0 fhandle-bytes:8 fhandle-type:1 f_handle:27261900802dfd73
+inotify wd:2 ino:7ef82a sdev:800001 mask:800afff ignored_mask:0 fhandle\-bytes:8 fhandle\-type:1 f_handle:2af87e00220ffd73
+inotify wd:1 ino:192627 sdev:800001 mask:800afff ignored_mask:0 fhandle\-bytes:8 fhandle\-type:1 f_handle:27261900802dfd73
 .EE
 .in
 .IP
@@ -965,8 +965,8 @@ The mask of events being monitored for the target file (in hexadecimal).
 .IP
 If the kernel was built with exportfs support, the path to the target
 file is exposed as a file handle, via three hexadecimal fields:
-.IR fhandle-bytes ,
-.IR fhandle-type ,
+.IR fhandle\-bytes ,
+.IR fhandle\-type ,
 and
 .IR f_handle .
 .IP
@@ -980,8 +980,8 @@ the following fields:
 pos:	0
 flags:	02
 mnt_id:	11
-fanotify flags:0 event-flags:88002
-fanotify ino:19264f sdev:800001 mflags:0 mask:1 ignored_mask:0 fhandle-bytes:8 fhandle-type:1 f_handle:4f261900a82dfd73
+fanotify flags:0 event\-flags:88002
+fanotify ino:19264f sdev:800001 mflags:0 mask:1 ignored_mask:0 fhandle\-bytes:8 fhandle\-type:1 f_handle:4f261900a82dfd73
 .EE
 .in
 .IP
@@ -997,7 +997,7 @@ argument given to
 .BR fanotify_init (2)
 (expressed in hexadecimal).
 .TP
-.I event-flags
+.I event\-flags
 The
 .I event_f_flags
 argument given to
@@ -1206,7 +1206,7 @@ Here is an example, with the output wrapped and reformatted to fit on an 80-colu
 .IP
 .in +4n
 .EX
-.RB "#" " ls -l /proc/self/map_files/"
+.RB "#" " ls \-l /proc/self/map_files/"
 lr\-\-\-\-\-\-\-\-. 1 root root 64 Apr 16 21:31
             3252e00000\-3252e20000 \-> /usr/lib64/ld\-2.15.so
 \&...
@@ -1260,25 +1260,25 @@ The format of the file is:
 .in 4n
 .EX
 .I "address           perms offset  dev   inode       pathname"
-00400000\-00452000 r-xp 00000000 08:02 173521      /usr/bin/dbus-daemon
-00651000\-00652000 r--p 00051000 08:02 173521      /usr/bin/dbus-daemon
-00652000\-00655000 rw-p 00052000 08:02 173521      /usr/bin/dbus-daemon
-00e03000\-00e24000 rw-p 00000000 00:00 0           [heap]
-00e24000\-011f7000 rw-p 00000000 00:00 0           [heap]
+00400000\-00452000 r\-xp 00000000 08:02 173521      /usr/bin/dbus\-daemon
+00651000\-00652000 r\-\-p 00051000 08:02 173521      /usr/bin/dbus\-daemon
+00652000\-00655000 rw\-p 00052000 08:02 173521      /usr/bin/dbus\-daemon
+00e03000\-00e24000 rw\-p 00000000 00:00 0           [heap]
+00e24000\-011f7000 rw\-p 00000000 00:00 0           [heap]
 \&...
-35b1800000\-35b1820000 r-xp 00000000 08:02 135522  /usr/lib64/ld\-2.15.so
-35b1a1f000\-35b1a20000 r--p 0001f000 08:02 135522  /usr/lib64/ld\-2.15.so
-35b1a20000\-35b1a21000 rw-p 00020000 08:02 135522  /usr/lib64/ld\-2.15.so
-35b1a21000\-35b1a22000 rw-p 00000000 00:00 0
-35b1c00000\-35b1dac000 r-xp 00000000 08:02 135870  /usr/lib64/libc\-2.15.so
-35b1dac000\-35b1fac000 ---p 001ac000 08:02 135870  /usr/lib64/libc\-2.15.so
-35b1fac000\-35b1fb0000 r--p 001ac000 08:02 135870  /usr/lib64/libc\-2.15.so
-35b1fb0000\-35b1fb2000 rw-p 001b0000 08:02 135870  /usr/lib64/libc\-2.15.so
+35b1800000\-35b1820000 r\-xp 00000000 08:02 135522  /usr/lib64/ld\-2.15.so
+35b1a1f000\-35b1a20000 r\-\-p 0001f000 08:02 135522  /usr/lib64/ld\-2.15.so
+35b1a20000\-35b1a21000 rw\-p 00020000 08:02 135522  /usr/lib64/ld\-2.15.so
+35b1a21000\-35b1a22000 rw\-p 00000000 00:00 0
+35b1c00000\-35b1dac000 r\-xp 00000000 08:02 135870  /usr/lib64/libc\-2.15.so
+35b1dac000\-35b1fac000 \-\-\-p 001ac000 08:02 135870  /usr/lib64/libc\-2.15.so
+35b1fac000\-35b1fb0000 r\-\-p 001ac000 08:02 135870  /usr/lib64/libc\-2.15.so
+35b1fb0000\-35b1fb2000 rw\-p 001b0000 08:02 135870  /usr/lib64/libc\-2.15.so
 \&...
-f2c6ff8c000\-7f2c7078c000 rw-p 00000000 00:00 0    [stack:986]
+f2c6ff8c000\-7f2c7078c000 rw\-p 00000000 00:00 0    [stack:986]
 \&...
-7fffb2c0d000\-7fffb2c2e000 rw-p 00000000 00:00 0   [stack]
-7fffb2d48000\-7fffb2d49000 r-xp 00000000 00:00 0   [vdso]
+7fffb2c0d000\-7fffb2c2e000 rw\-p 00000000 00:00 0   [stack]
+7fffb2d48000\-7fffb2d49000 r\-xp 00000000 00:00 0   [vdso]
 .EE
 .in
 .IP
@@ -1743,7 +1743,7 @@ The page is exclusively mapped.
 55 (since Linux 3.11)
 PTE is soft-dirty
 (see the kernel source file
-.IR Documentation/admin-guide/mm/soft-dirty.rst ).
+.IR Documentation/admin\-guide/mm/soft\-dirty.rst ).
 .TP
 54\(en0
 If the page is present in RAM (bit 63), then these bits
@@ -3204,7 +3204,7 @@ The total length of the file is the size of physical memory (RAM) plus
 See
 .BR keyrings (7).
 .TP
-.IR /proc/key-users " (since Linux 2.6.10)"
+.IR /proc/key\-users " (since Linux 2.6.10)"
 See
 .BR keyrings (7).
 .TP
@@ -3287,7 +3287,7 @@ The bits are as follows:
 .IP
 For further details on the meanings of these bits,
 see the kernel source file
-.IR Documentation/admin-guide/mm/pagemap.rst .
+.IR Documentation/admin\-guide/mm/pagemap.rst .
 Before kernel 2.6.29,
 .\" commit ad3bdefe877afb47480418fdb05ecd42842de65e
 .\" commit e07a4b9217d1e97d2f3a62b6b070efdc61212110
@@ -3340,7 +3340,7 @@ An example of the content shown in this file is the following:
 5: POSIX  ADVISORY  WRITE 764 00:16:21448 0 0
 6: POSIX  ADVISORY  READ  3548 08:01:7867240 1 1
 7: POSIX  ADVISORY  READ  3548 08:01:7865567 1826 2335
-8: OFDLCK ADVISORY  WRITE -1 08:01:8713209 128 191
+8: OFDLCK ADVISORY  WRITE \-1 08:01:8713209 128 191
 .EE
 .in
 .IP
@@ -3620,7 +3620,7 @@ only if strict overcommit accounting is enabled (mode 2 in
 The limit is calculated according to the formula described under
 .IR /proc/sys/vm/overcommit_memory .
 For further details, see the kernel source file
-.IR Documentation/vm/overcommit-accounting.rst .
+.IR Documentation/vm/overcommit\-accounting.rst .
 .TP
 .IR Committed_AS " %lu"
 The amount of memory presently allocated on the system.
@@ -3834,7 +3834,7 @@ The format is:
 .IP
 .in 1n
 .EX
-Inter-|   Receive                                                |  Transmit
+Inter\-|   Receive                                                |  Transmit
  face |bytes    packets errs drop fifo frame compressed multicast|bytes    packets errs drop fifo colls carrier compressed
     lo: 2776770   11307    0    0    0     0          0         0  2776770   11307    0    0    0     0       0          0
   eth0: 1215645    2751    0    0    0     0          0         0  1782404    4324    0    0    0   427       0          0
@@ -4023,7 +4023,7 @@ options to the
 .BR iptables (8)
 NFQUEUE target.
 See
-.BR iptables-extensions (8)
+.BR iptables\-extensions (8)
 for more information.
 .TP
 (2)
@@ -4114,14 +4114,14 @@ switch certain features on or off.
 .I /proc/scsi/scsi
 This is a listing of all SCSI devices known to the kernel.
 The listing is similar to the one seen during bootup.
-scsi currently supports only the \fIadd-single-device\fP command which
+scsi currently supports only the \fIadd\-single\-device\fP command which
 allows root to add a hotplugged device to the list of known devices.
 .IP
 The command
 .IP
 .in +4n
 .EX
-echo \(aqscsi add-single-device 1 0 5 0\(aq > /proc/scsi/scsi
+echo \(aqscsi add\-single\-device 1 0 5 0\(aq > /proc/scsi/scsi
 .EE
 .in
 .IP
@@ -4134,7 +4134,7 @@ error will be returned.
 .I /proc/scsi/[drivername]
 \fI[drivername]\fP can currently be NCR53c7xx, aha152x, aha1542, aha1740,
 aic7xxx, buslogic, eata_dma, eata_pio, fdomain, in2000, pas16, qlogic,
-scsi_debug, seagate, t128, u15-24f, ultrastore, or wd7000.
+scsi_debug, seagate, t128, u15\-24f, ultrastore, or wd7000.
 These directories show up for all drivers that registered at least one
 SCSI HBA.
 Every directory contains one file per registered host.
@@ -4339,12 +4339,12 @@ related to filesystems.
 .I /proc/sys/fs/binfmt_misc
 Documentation for files in this directory can be found
 in the Linux kernel source in the file
-.IR Documentation/admin-guide/binfmt-misc.rst
+.IR Documentation/admin\-guide/binfmt\-misc.rst
 (or in
 .IR Documentation/binfmt_misc.txt
 on older kernels).
 .TP
-.IR /proc/sys/fs/dentry-state " (since Linux 2.2)"
+.IR /proc/sys/fs/dentry\-state " (since Linux 2.2)"
 This file contains information about the status of the
 directory cache (dcache).
 The file contains six numbers,
@@ -4371,7 +4371,7 @@ is nonzero when the kernel has called shrink_dcache_pages() and the
 dcache isn't pruned yet.
 .RE
 .TP
-.I /proc/sys/fs/dir-notify-enable
+.I /proc/sys/fs/dir\-notify\-enable
 This file can be used to disable or enable the
 .I dnotify
 interface described in
@@ -4380,14 +4380,14 @@ on a system-wide basis.
 A value of 0 in this file disables the interface,
 and a value of 1 enables it.
 .TP
-.I /proc/sys/fs/dquot-max
+.I /proc/sys/fs/dquot\-max
 This file shows the maximum number of cached disk quota entries.
 On some (2.4) systems, it is not present.
 If the number of free cached disk quota entries is very low and
 you have some awesome number of simultaneous system users,
 you might want to raise the limit.
 .TP
-.I /proc/sys/fs/dquot-nr
+.I /proc/sys/fs/dquot\-nr
 This file shows the number of allocated disk quota
 entries and the number of free disk quota entries.
 .TP
@@ -4400,7 +4400,7 @@ interface.
 For further details, see
 .BR epoll (7).
 .TP
-.I /proc/sys/fs/file-max
+.I /proc/sys/fs/file\-max
 This file defines
 a system-wide limit on the number of open files for all processes.
 System calls that fail when encountering this limit fail with the error
@@ -4412,28 +4412,28 @@ which can be used by a process to set the per-process limit,
 on the number of files it may open.)
 If you get lots
 of error messages in the kernel log about running out of file handles
-(look for "VFS: file-max limit <number> reached"),
+(look for "VFS: file\-max limit <number> reached"),
 try increasing this value:
 .IP
 .in +4n
 .EX
-echo 100000 > /proc/sys/fs/file-max
+echo 100000 > /proc/sys/fs/file\-max
 .EE
 .in
 .IP
 Privileged processes
 .RB ( CAP_SYS_ADMIN )
 can override the
-.I file-max
+.I file\-max
 limit.
 .TP
-.I /proc/sys/fs/file-nr
+.I /proc/sys/fs/file\-nr
 This (read-only) file contains three numbers:
 the number of allocated file handles
 (i.e., the number of files presently opened);
 the number of free file handles;
 and the maximum number of file handles (i.e., the same value as
-.IR /proc/sys/fs/file-max ).
+.IR /proc/sys/fs/file\-max ).
 If the number of allocated file handles is close to the
 maximum, you should consider increasing the maximum.
 Before Linux 2.6,
@@ -4446,11 +4446,11 @@ a past peak in the usage of open file handles.
 Since Linux 2.6, the kernel does deallocate freed file handles,
 and the "free file handles" value is always zero.
 .TP
-.IR /proc/sys/fs/inode-max " (only present until Linux 2.2)"
+.IR /proc/sys/fs/inode\-max " (only present until Linux 2.2)"
 This file contains the maximum number of in-memory inodes.
 This value should be 3\(en4 times larger
 than the value in
-.IR file-max ,
+.IR file\-max ,
 since \fIstdin\fP, \fIstdout\fP
 and network sockets also need an inode to handle them.
 When you regularly run out of inodes, you need to increase this value.
@@ -4459,11 +4459,11 @@ Starting with Linux 2.4,
 there is no longer a static limit on the number of inodes,
 and this file is removed.
 .TP
-.I /proc/sys/fs/inode-nr
+.I /proc/sys/fs/inode\-nr
 This file contains the first two values from
-.IR inode-state .
+.IR inode\-state .
 .TP
-.I /proc/sys/fs/inode-state
+.I /proc/sys/fs/inode\-state
 This file
 contains seven numbers:
 .IR nr_inodes ,
@@ -4474,7 +4474,7 @@ and four dummy values (always zero).
 .I nr_inodes
 is the number of inodes the system has allocated.
 .\" This can be slightly more than
-.\" .I inode-max
+.\" .I inode\-max
 .\" because Linux allocates them one page full at a time.
 .I nr_free_inodes
 represents the number of free inodes.
@@ -4483,7 +4483,7 @@ represents the number of free inodes.
 is nonzero when the
 .I nr_inodes
 >
-.I inode-max
+.I inode\-max
 and the system needs to prune the inode list instead of allocating more;
 since Linux 2.4, this field is a dummy value (always zero).
 .TP
@@ -4496,7 +4496,7 @@ interface.
 For further details, see
 .BR inotify (7).
 .TP
-.I /proc/sys/fs/lease-break-time
+.I /proc/sys/fs/lease\-break\-time
 This file specifies the grace period that the kernel grants to a process
 holding a file lease
 .RB ( fcntl (2))
@@ -4505,14 +4505,14 @@ that another process is waiting to open the file.
 If the lease holder does not remove or downgrade the lease within
 this grace period, the kernel forcibly breaks the lease.
 .TP
-.I /proc/sys/fs/leases-enable
+.I /proc/sys/fs/leases\-enable
 This file can be used to enable or disable file leases
 .RB ( fcntl (2))
 on a system-wide basis.
 If this file contains the value 0, leases are disabled.
 A nonzero value enables leases.
 .TP
-.IR /proc/sys/fs/mount-max " (since Linux 4.9)"
+.IR /proc/sys/fs/mount\-max " (since Linux 4.9)"
 .\" commit d29216842a85c7970c536108e093963f02714498
 The value in this file specifies the maximum number of mounts that may exist
 in a mount namespace.
@@ -4548,15 +4548,15 @@ When one of these filesystems is mounted
 with writes enabled, any UID or GID that would exceed 65535 is translated
 to the overflow value before being written to disk.
 .TP
-.IR /proc/sys/fs/pipe-max-size " (since Linux 2.6.35)"
+.IR /proc/sys/fs/pipe\-max\-size " (since Linux 2.6.35)"
 See
 .BR pipe (7).
 .TP
-.IR /proc/sys/fs/pipe-user-pages-hard " (since Linux 4.5)"
+.IR /proc/sys/fs/pipe\-user\-pages\-hard " (since Linux 4.5)"
 See
 .BR pipe (7).
 .TP
-.IR /proc/sys/fs/pipe-user-pages-soft " (since Linux 4.5)"
+.IR /proc/sys/fs/pipe\-user\-pages\-soft " (since Linux 4.5)"
 See
 .BR pipe (7).
 .TP
@@ -4703,18 +4703,18 @@ For details of the effect of a process's "dumpable" setting
 on ptrace access mode checking, see
 .BR ptrace (2).
 .TP
-.I /proc/sys/fs/super-max
+.I /proc/sys/fs/super\-max
 This file
 controls the maximum number of superblocks, and
 thus the maximum number of mounted filesystems the kernel
 can have.
 You need increase only
-.I super-max
+.I super\-max
 if you need to mount more filesystems than the current value in
-.I super-max
+.I super\-max
 allows you to.
 .TP
-.I /proc/sys/fs/super-nr
+.I /proc/sys/fs/super\-nr
 This file
 contains the number of filesystems currently mounted.
 .TP
@@ -4775,7 +4775,7 @@ and reads from this file always return the value "0".
 See
 .BR capabilities (7).
 .TP
-.IR /proc/sys/kernel/cap-bound " (from Linux 2.2 to 2.6.24)"
+.IR /proc/sys/kernel/cap\-bound " (from Linux 2.2 to 2.6.24)"
 This file holds the value of the kernel
 .I "capability bounding set"
 (expressed as a signed decimal number).
@@ -4799,7 +4799,7 @@ See
 See
 .BR core (5).
 .TP
-.I /proc/sys/kernel/ctrl-alt-del
+.I /proc/sys/kernel/ctrl\-alt\-del
 This file
 controls the handling of Ctrl-Alt-Del from the keyboard.
 When the value in this file is 0, Ctrl-Alt-Del is trapped and
@@ -4869,7 +4869,7 @@ The default value in this file is
 .IR /sbin/hotplug .
 .TP
 .\" Removed in commit 87f504e5c78b910b0c1d6ffb89bc95e492322c84 (tglx/history.git)
-.IR /proc/sys/kernel/htab-reclaim " (before Linux 2.4.9.2)"
+.IR /proc/sys/kernel/htab\-reclaim " (before Linux 2.4.9.2)"
 (PowerPC only) If this file is set to a nonzero value,
 the PowerPC htab
 .\" removed in commit 1b483a6a7b2998e9c98ad985d7494b9b725bd228, before 2.6.28
@@ -5020,7 +5020,7 @@ approximately 4 million).
 .\" platforms, but this broke /proc/[pid]
 .\" See http://marc.theaimsgroup.com/?l=linux-kernel&m=109513010926152&w=2
 .TP
-.IR /proc/sys/kernel/powersave-nap " (PowerPC only)"
+.IR /proc/sys/kernel/powersave\-nap " (PowerPC only)"
 This file contains a flag.
 If set, Linux-PPC will use the "nap" mode of
 powersaving,
@@ -5088,7 +5088,7 @@ This value is the default if the kernel was not configured with
 .BR CONFIG_COMPAT_BRK .
 .RE
 .TP
-.I /proc/sys/kernel/real-root-dev
+.I /proc/sys/kernel/real\-root\-dev
 This file is documented in the Linux kernel source file
 .I Documentation/admin\-guide/initrd.rst
 .\" commit 9d85025b0418163fae079c9ba8f8445212de8568
@@ -5096,20 +5096,20 @@ This file is documented in the Linux kernel source file
 .I Documentation/initrd.txt
 before Linux 4.10).
 .TP
-.IR /proc/sys/kernel/reboot-cmd " (Sparc only) "
+.IR /proc/sys/kernel/reboot\-cmd " (Sparc only) "
 This file seems to be a way to give an argument to the SPARC
 ROM/Flash boot loader.
 Maybe to tell it what to do after
 rebooting?
 .TP
-.I /proc/sys/kernel/rtsig-max
+.I /proc/sys/kernel/rtsig\-max
 (Only in kernels up to and including 2.6.7; see
 .BR setrlimit (2))
 This file can be used to tune the maximum number
 of POSIX real-time (queued) signals that can be outstanding
 in the system.
 .TP
-.I /proc/sys/kernel/rtsig-nr
+.I /proc/sys/kernel/rtsig\-nr
 (Only in kernels up to and including 2.6.7.)
 This file shows the number of POSIX real-time signals currently queued.
 .TP
@@ -5163,7 +5163,7 @@ call.
 A system-wide limit on the maximum number of semaphore identifiers.
 .RE
 .TP
-.I /proc/sys/kernel/sg-big-buff
+.I /proc/sys/kernel/sg\-big\-buff
 This file
 shows the size of the generic SCSI device (sg) buffer.
 You can't tune it just yet, but you could change it at
@@ -5347,7 +5347,7 @@ The "#5" means that
 this is the fifth kernel built from this source base and the
 date following it indicates the time the kernel was built.
 .TP
-.IR /proc/sys/kernel/threads-max " (since Linux 2.3.11)"
+.IR /proc/sys/kernel/threads\-max " (since Linux 2.3.11)"
 .\" The following is based on Documentation/sysctl/kernel.txt
 This file specifies the system-wide limit on the number of
 threads (tasks) that can be created on the system.
@@ -5355,7 +5355,7 @@ threads (tasks) that can be created on the system.
 Since Linux 4.1,
 .\" commit 230633d109e35b0a24277498e773edeb79b4a331
 the value that can be written to
-.I threads-max
+.I threads\-max
 is bounded.
 The minimum value that can be written is 20.
 The maximum value that can be written is given by the
@@ -5363,7 +5363,7 @@ constant
 .B FUTEX_TID_MASK
 (0x3fffffff).
 If a value outside of this range is written to
-.IR threads-max ,
+.IR threads\-max ,
 the error
 .B EINVAL
 occurs.
@@ -5371,14 +5371,14 @@ occurs.
 The value written is checked against the available RAM pages.
 If the thread structures would occupy too much (more than 1/8th)
 of the available RAM pages,
-.I threads-max
+.I threads\-max
 is reduced accordingly.
 .TP
 .IR /proc/sys/kernel/yama/ptrace_scope " (since Linux 3.5)"
 See
 .BR ptrace (2).
 .TP
-.IR /proc/sys/kernel/zero-paged " (PowerPC only) "
+.IR /proc/sys/kernel/zero\-paged " (PowerPC only) "
 This file
 contains a flag.
 When enabled (nonzero), Linux-PPC will pre-zero pages in
@@ -5659,7 +5659,7 @@ in
 .IR /proc/meminfo )
 is calculated as
 .IP
-    CommitLimit = (total_RAM - total_huge_TLB) *
+    CommitLimit = (total_RAM \- total_huge_TLB) *
                   overcommit_ratio / 100 + total_swap
 .IP
 where:
@@ -5785,7 +5785,7 @@ capability may employ
 .BR userfaultfd (2).
 The default value in this file is 1.
 .TP
-.IR /proc/sysrq-trigger " (since Linux 2.4.21)"
+.IR /proc/sysrq\-trigger " (since Linux 2.4.21)"
 Writing a character to this file triggers the same SysRq function as
 typing ALT-SysRq-<character> (see the description of
 .IR /proc/sys/kernel/sysrq ).
@@ -5811,7 +5811,7 @@ for easy understanding.
 .BR sysvipc (7)
 provides further background on the information shown by these files.
 .TP
-.IR /proc/thread-self " (since Linux 3.17)"
+.IR /proc/thread\-self " (since Linux 3.17)"
 .\" commit 0097875bd41528922fb3bb5f348c53f17e00e2fd
 This directory refers to the thread accessing the
 .I /proc
@@ -5901,7 +5901,7 @@ Collection: active
   255,     0 swapper/3        hrtimer_start_range_ns (tick_sched_timer)
    71,     0 swapper/1        hrtimer_start_range_ns (tick_sched_timer)
    58,     0 swapper/0        hrtimer_start_range_ns (tick_sched_timer)
-    4,  1694 gnome-shell      mod_delayed_work_on (delayed_work_timer_fn)
+    4,  1694 gnome\-shell      mod_delayed_work_on (delayed_work_timer_fn)
    17,     7 rcu_sched        rcu_gp_kthread (process_timeout)
 \&...
     1,  4911 kworker/u16:0    mod_delayed_work_on (delayed_work_timer_fn)
@@ -6454,7 +6454,7 @@ Number of free CMA (Contiguous Memory Allocator) pages.
 .IR compact_stall " (since Linux 2.6.35)"
 .\" commit 56de7263fcf3eb10c8dcdf8d59a9cec831795f3f
 See the kernel source file
-.IR Documentation/admin-guide/mm/transhuge.rst .
+.IR Documentation/admin\-guide/mm/transhuge.rst .
 .\" Present only if the kernel was configured with
 .\" .BR CONFIG_VM_EVENT_COUNTERS
 .\" and
@@ -6463,7 +6463,7 @@ See the kernel source file
 .IR compact_fail " (since Linux 2.6.35)"
 .\" commit 56de7263fcf3eb10c8dcdf8d59a9cec831795f3f
 See the kernel source file
-.IR Documentation/admin-guide/mm/transhuge.rst .
+.IR Documentation/admin\-guide/mm/transhuge.rst .
 .\" Present only if the kernel was configured with
 .\" .BR CONFIG_VM_EVENT_COUNTERS
 .\" and
@@ -6472,7 +6472,7 @@ See the kernel source file
 .IR compact_success " (since Linux 2.6.35)"
 .\" commit 56de7263fcf3eb10c8dcdf8d59a9cec831795f3f
 See the kernel source file
-.IR Documentation/admin-guide/mm/transhuge.rst .
+.IR Documentation/admin\-guide/mm/transhuge.rst .
 .\" Present only if the kernel was configured with
 .\" .BR CONFIG_VM_EVENT_COUNTERS
 .\" and
@@ -6531,7 +6531,7 @@ See the kernel source file
 .IR thp_fault_alloc " (since Linux 2.6.39)"
 .\" commit 81ab4201fb7d91d6b0cd9ad5b4b16776e4bed145
 See the kernel source file
-.IR Documentation/admin-guide/mm/transhuge.rst .
+.IR Documentation/admin\-guide/mm/transhuge.rst .
 .\" Present only if the kernel was configured with
 .\" .BR CONFIG_VM_EVENT_COUNTERS
 .\" and
@@ -6540,7 +6540,7 @@ See the kernel source file
 .IR thp_fault_fallback " (since Linux 2.6.39)"
 .\" commit 81ab4201fb7d91d6b0cd9ad5b4b16776e4bed145
 See the kernel source file
-.IR Documentation/admin-guide/mm/transhuge.rst .
+.IR Documentation/admin\-guide/mm/transhuge.rst .
 .\" Present only if the kernel was configured with
 .\" .BR CONFIG_VM_EVENT_COUNTERS
 .\" and
@@ -6549,7 +6549,7 @@ See the kernel source file
 .IR thp_collapse_alloc " (since Linux 2.6.39)"
 .\" commit 81ab4201fb7d91d6b0cd9ad5b4b16776e4bed145
 See the kernel source file
-.IR Documentation/admin-guide/mm/transhuge.rst .
+.IR Documentation/admin\-guide/mm/transhuge.rst .
 .\" Present only if the kernel was configured with
 .\" .BR CONFIG_VM_EVENT_COUNTERS
 .\" and
@@ -6558,7 +6558,7 @@ See the kernel source file
 .IR thp_collapse_alloc_failed " (since Linux 2.6.39)"
 .\" commit 81ab4201fb7d91d6b0cd9ad5b4b16776e4bed145
 See the kernel source file
-.IR Documentation/admin-guide/mm/transhuge.rst .
+.IR Documentation/admin\-guide/mm/transhuge.rst .
 .\" Present only if the kernel was configured with
 .\" .BR CONFIG_VM_EVENT_COUNTERS
 .\" and
@@ -6567,7 +6567,7 @@ See the kernel source file
 .IR thp_split " (since Linux 2.6.39)"
 .\" commit 81ab4201fb7d91d6b0cd9ad5b4b16776e4bed145
 See the kernel source file
-.IR Documentation/admin-guide/mm/transhuge.rst .
+.IR Documentation/admin\-guide/mm/transhuge.rst .
 .\" Present only if the kernel was configured with
 .\" .BR CONFIG_VM_EVENT_COUNTERS
 .\" and
@@ -6576,7 +6576,7 @@ See the kernel source file
 .IR thp_zero_page_alloc " (since Linux 3.8)"
 .\" commit d8a8e1f0da3d29d7268b3300c96a059d63901b76
 See the kernel source file
-.IR Documentation/admin-guide/mm/transhuge.rst .
+.IR Documentation/admin\-guide/mm/transhuge.rst .
 .\" Present only if the kernel was configured with
 .\" .BR CONFIG_VM_EVENT_COUNTERS
 .\" and
@@ -6585,7 +6585,7 @@ See the kernel source file
 .IR thp_zero_page_alloc_failed " (since Linux 3.8)"
 .\" commit d8a8e1f0da3d29d7268b3300c96a059d63901b76
 See the kernel source file
-.IR Documentation/admin-guide/mm/transhuge.rst .
+.IR Documentation/admin\-guide/mm/transhuge.rst .
 .\" Present only if the kernel was configured with
 .\" .BR CONFIG_VM_EVENT_COUNTERS
 .\" and
-- 
2.25.1