From: "Alejandro Colomar (man-pages)" <email@example.com> To: "G. Branden Robinson" <firstname.lastname@example.org>, "Mickaël Salaün" <email@example.com> Cc: "Jann Horn" <firstname.lastname@example.org>, "Jonathan Corbet" <email@example.com>, "Kees Cook" <firstname.lastname@example.org>, "Randy Dunlap" <email@example.com>, "Vincent Dagonneau" <firstname.lastname@example.org>, email@example.com, firstname.lastname@example.org, email@example.com, firstname.lastname@example.org, "Mickaël Salaün" <email@example.com>, "Michael Kerrisk" <firstname.lastname@example.org> Subject: Re: [PATCH v2 1/4] landlock.7: Add a new page to introduce Landlock Date: Sat, 31 Jul 2021 12:51:30 +0200 [thread overview] Message-ID: <email@example.com> (raw) In-Reply-To: <firstname.lastname@example.org> Hi Branden, Mickaël, On 7/31/21 1:39 AM, G. Branden Robinson wrote: > Hi, Mickaël! > > I'm going to rearrange your message to reply to it to put the shortest > point first, as I am nervous of people tiring of my info dumps, > especially with such an efflorescent CC list. > > At 2021-07-30T14:15:48+0200, Mickaël Salaün wrote: >>>> +The rule will only allow reading the file hierarchy >>>> +.IR /usr . >> >> Why ".IR" is correct here? > > Because you don't want a space or a line break in the output between > "/usr" and the period. > > Line breaks in *roff input usually mean "insert a word break here". > > [the long version] >> When do we really need .IR? Isn't `.I "foo bar"` the same as `.IR foo >> bar`? What do you use roman for? >> >> Where can we find these preferences? The best I found was >> https://www.man7.org/linux/man-pages/man7/groff_man.7.html but it >> doesn't explain what to use. The current man pages seems to use both >> interchangeably. > > This is a good news/bad news situation for me. As the maintainer of > that man page, I'm delighted to hear that you found it the best resource > of its type. But that you came away still not knowing when or why to > use .IR tells me I still have work to do. > > One of the things I did after the groff 1.22.4 release (December 2018) > was to split groff_man(7) into two pages. The one you've linked is the > terser reference for seasoned (perhaps salty) man page writers. Near > the top of it you'll find this. > > This document presents the macros thematically; for those needing > only a quick reference, the following table lists them > alphabetically, with cross-references to appropriate subsections > below. > > Man page authors and maintainers who are not already experienced > groff users should consult groff_man_style(7), an expanded > version of this document, for additional explanations and advice. > It covers only those concepts required for man page document > maintenance, and not the full breadth of the groff typesetting > system. Hmmmm, I can't find that text on my Debian Sid (with a bit of experimental) groff_man(7). Not even in the SEE ALSO. SEE ALSO Groff: The GNU Implementation of troff, by Trent A. Fisher and Werner Lemberg, is the main groff documentation. You can browse it interactively with “info groff”. tbl(1), eqn(1), and refer(1) are preprocessors used with man pages. man(1) describes the man page formatter on your system. groff_mdoc(7) describes the groff version of the BSD‐origi‐ nated alternative macro package for man pages. groff(7), groff_char(7), man(7) groff 1.22.4 27 January 2021 GROFF_MAN(7) > > There, at <https://www.man7.org/linux/man-pages/man7/groff_man.7.html>, > I'd direct you to the following. > > Font style macros > The man macro package is limited in its font styling options, > offering only bold (.B), italic (.I), and roman. Italic text is > usually set underscored instead on terminal devices. The .SM and > .SB macros set text in roman or bold, respectively, at a smaller > point size; these differ visually from regular-sized roman or > bold text only on typesetter devices. It is often necessary to > set text in different styles without intervening space. The > macros .BI, .BR, .IB, .IR, .RB, and .RI, where “B”, “I”, and “R” > indicate bold, italic, and roman, respectively, set their odd- > and even-numbered arguments in alternating styles, with no space > separating them. > [...] > .I [text] > Set text in italics. If the macro is given no arguments, > the text of the next input line is set in italics. > > Use italics for file and path names, for environment > variables, for enumeration or preprocessor constants in C, > for variable (user-determined) portions of syntax > synopses, for the first occurrence (only) of a technical > concept being introduced, for names of works of software > (including commands and functions, but excluding names of > operating systems or their kernels), and anywhere a > parameter requiring replacement by the user is > encountered. An exception involves variable text in a > context that is already marked up in italics, such as file > or path names with variable components; in such cases, > follow the convention of mathematical typography: set the > file or path name in italics as usual but use roman for > the variable part (see .IR and .RI below), and italics > again in running roman text when referring to the variable > material. Re-reading this, we've been doing it wrong (as you pointed out in another thread) with macro names with variable part. I wasn't very convinced by the current usage of the man pages, but it was already current, so I just followed it :/ I'll try to follow this from now. > [...] > Note what is not prescribed for setting in bold or italics above: > elements of “synopsis language” such as ellipses and brackets > around options; proper names and adjectives; titles of anything > other than works of literature or software; identifiers for > standards documents or technical reports such as CSTR #54, > RFC 1918, Unicode 13.0, or POSIX.1-2017; acronyms; and > occurrences after the first of a technical term or piece of > jargon. Again, the names of operating systems and their kernels > are, by practically universal convention, set in roman. > > Be frugal with italics for emphasis, and particularly with bold. > Brief runs of literal text, such as references to individual > characters or short strings, including section and subsection > headings of man pages, are suitable objects for quotation; see > the \(lq, \(rq, \(oq, and \(cq escapes in subsection > “Portability” below. > > Unlike the above font style macros, the font style alternation > macros below accept only arguments on the same line as the macro > call. Italic corrections are applied as appropriate. If space > is required within one of the arguments, first consider whether > the same result could be achieved with as much clarity by using > the single-style macros on separate input lines. When it cannot, > double-quote an argument containing embedded space characters. > Setting all three different styles within a word presents > challenges; it is possible with the \c and/or \f escapes, but see > subsection “Portability” below for caveats. Ahh, I missed this text, as it was neither under .I nor .IR, and only had a fast read of the page. The 3rd paragraph hints that you should only use .IR when really needed, and use .I otherwise. But someone new to man-pages, who probably did never read this page (or read some specific paragraphs of it when needed), and found the extensive (and somewhat incorrect) usage of .IR in place of .I in the current man pages, might be confused by all of that inconsistency and hard-to-find (except by those who already know where it is (reference to Pirates of the Caribbean intended :) )) information. > [...] > .IR italic-text roman-text ... > Set each argument in italics and roman, alternately. > > This is the first command of the > .IR prologue . > > I'd appreciate feedback from anyone on how I can improve the above. I think it's great. But unless one reads the page with some time (and not only the bullets), one might think that the man page is incomplete. Maybe groff_man_style(7) is better suited for newbies, but I can't tell... I couldn't find it. > >>>> +upper layer. >>>> +From a Landlock policy point of view, >>>> +each OverlayFS layers and merge hierarchies are standalone and contains >>>> +their own set of files and directories, >>>> +which is different from bind mounts. >>> >>> >>> Incorrect mix of singular and plural, I think. >> >> Is it OK with s/contains/contain/? > > That's correct, but you also need s/their/its/. I'm not sure, but maybe (I always get confused by these things)?: [ each _of the_ OverlayFS layers and merge hierarchies _is_ standalone and _contains_ _its_ own set of files and directories, which is different from bind mounts. ] And still I'm not sure about the last "mounts". Without s/each/each of the/ we still have layers and hierarchies (plurals), which don't mix well with each (singular). Regards, Alex > > A handy technique for resolving inflection/agreement problems in English > is to drop phrases from the sentence in a way that preserves its > structure; this usually makes clear what should be done. > > In this case, "... Each ... contains its own set." > > Native speakers screw this up even in simpler cases; e.g., > > *"The spaces in between leave room for you and I to grow." > > We get thrown by the conjunction "and", which makes the language organ > in our brain think of plural number. But no native speaker ever commits > the error > > *"Will you buy a hamburger for I?" > > unless for deliberate effect. (Though there is probably some hamlet in > the West Midlands of England or something where this is standard. :-| ) > > Regards, > Branden > >  "Usually." In roff terms, this generalization applies to text lines > (not control lines; that is, lines starting with a control > character) that do not end with the output line continuation escape > sequence, '\c'. > -- Alejandro Colomar Linux man-pages comaintainer; https://www.kernel.org/doc/man-pages/ http://www.alejandro-colomar.es/
next prev parent reply other threads:[~2021-07-31 10:51 UTC|newest] Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-07-12 15:57 [PATCH v2 0/4] Add Landlock man pages Mickaël Salaün 2021-07-12 15:57 ` [PATCH v2 1/4] landlock.7: Add a new page to introduce Landlock Mickaël Salaün 2021-07-29 14:56 ` Alejandro Colomar (man-pages) 2021-07-29 22:01 ` G. Branden Robinson 2021-07-29 22:34 ` Alejandro Colomar (man-pages) 2021-07-30 12:15 ` Mickaël Salaün 2021-07-30 12:41 ` Alejandro Colomar (man-pages) 2021-07-30 12:59 ` Alejandro Colomar (man-pages) 2021-07-30 14:32 ` Mickaël Salaün 2021-07-31 0:15 ` G. Branden Robinson 2021-07-31 11:02 ` Alejandro Colomar (man-pages) 2021-08-01 9:28 ` G. Branden Robinson 2021-07-30 23:39 ` G. Branden Robinson 2021-07-31 10:51 ` Alejandro Colomar (man-pages) [this message] 2021-07-31 13:48 ` G. Branden Robinson 2021-07-12 15:57 ` [PATCH v2 2/4] landlock_create_ruleset.2: Document new syscall Mickaël Salaün 2021-07-12 15:57 ` [PATCH v2 3/4] landlock_add_rule.2: " Mickaël Salaün 2021-07-12 15:57 ` [PATCH v2 4/4] landlock_restrict_self.2: " Mickaël Salaün
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --email@example.com \ --firstname.lastname@example.org \ --email@example.com \ --firstname.lastname@example.org \ --email@example.com \ --firstname.lastname@example.org \ --email@example.com \ --firstname.lastname@example.org \ --email@example.com \ --firstname.lastname@example.org \ --email@example.com \ --firstname.lastname@example.org \ --email@example.com \ --firstname.lastname@example.org \ --email@example.com \ --subject='Re: [PATCH v2 1/4] landlock.7: Add a new page to introduce Landlock' \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).