[PATCH] man4/*: srcfix, remove trailing space in "strings"

[PATCH] man4/*: srcfix, remove trailing space in "strings"

[Bjarni Ingi Gislason]

  Trim trailing space.

  There is no change in the output from "nroff" and "groff".

Signed-off-by: Bjarni Ingi Gislason <bjarniig@rhi.hi.is>
---
 man4/console_codes.4 | 4 ++--
 man4/initrd.4        | 2 +-
 man4/loop.4          | 2 +-
 3 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/man4/console_codes.4 b/man4/console_codes.4
index 113f43151..be34a0d91 100644
--- a/man4/console_codes.4
+++ b/man4/console_codes.4
@@ -397,11 +397,11 @@ ESC [ 11 ; \fIn\fP ]	Set bell duration in msec.
 ESC [ 12 ; \fIn\fP ]	Bring specified console to the front.
 ESC [ 13 ]      	Unblank the screen.
 ESC [ 14 ; \fIn\fP ]   	Set the VESA powerdown interval in minutes.
-ESC [ 15 ]      	T{
+ESC [ 15 ]	T{
 Bring the previous console to the front
 (since Linux 2.6.0).
 T}
-ESC [ 16 ; \fIn\fP ]   	T{
+ESC [ 16 ; \fIn\fP ]	T{
 Set the cursor blink interval in milliseconds
 (since Linux 4.2).
 T}
diff --git a/man4/initrd.4 b/man4/initrd.4
index a10736456..e41917817 100644
--- a/man4/initrd.4
+++ b/man4/initrd.4
@@ -75,7 +75,7 @@ is a read-only block device.
 This device is a RAM disk that is initialized (e.g., loaded)
 by the boot loader before the kernel is started.
 The kernel then can use
-.IR /dev/initrd "'s "
+.IR /dev/initrd "'s"
 contents for a two-phase system boot-up.
 .PP
 In the first boot-up phase, the kernel starts up
diff --git a/man4/loop.4 b/man4/loop.4
index 510ed88a7..1623cad0e 100644
--- a/man4/loop.4
+++ b/man4/loop.4
@@ -42,7 +42,7 @@ You could do
 .in +4n
 .EX
 $ \fBdd if=/dev/zero of=file.img bs=1MiB count=10\fP
-$ \fBsudo losetup /dev/loop4 file.img \fP
+$ \fBsudo losetup /dev/loop4 file.img\fP
 $ \fBsudo mkfs -t ext4 /dev/loop4\fP
 $ \fBsudo mkdir /myloopdev\fP
 $ \fBsudo mount /dev/loop4 /myloopdev\fP
-- 
2.27.0

Re: [PATCH] man4/*: srcfix, remove trailing space in "strings"

[Michael Kerrisk (man-pages)]

Hello Bjarni,

On 6/20/20 5:39 PM, Bjarni Ingi Gislason wrote:
>   Trim trailing space.
> 
>   There is no change in the output from "nroff" and "groff".

Thanks. Applied.

Cheers,

Michael

> Signed-off-by: Bjarni Ingi Gislason <bjarniig@rhi.hi.is>
> ---
>  man4/console_codes.4 | 4 ++--
>  man4/initrd.4        | 2 +-
>  man4/loop.4          | 2 +-
>  3 files changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/man4/console_codes.4 b/man4/console_codes.4
> index 113f43151..be34a0d91 100644
> --- a/man4/console_codes.4
> +++ b/man4/console_codes.4
> @@ -397,11 +397,11 @@ ESC [ 11 ; \fIn\fP ]	Set bell duration in msec.
>  ESC [ 12 ; \fIn\fP ]	Bring specified console to the front.
>  ESC [ 13 ]      	Unblank the screen.
>  ESC [ 14 ; \fIn\fP ]   	Set the VESA powerdown interval in minutes.
> -ESC [ 15 ]      	T{
> +ESC [ 15 ]	T{
>  Bring the previous console to the front
>  (since Linux 2.6.0).
>  T}
> -ESC [ 16 ; \fIn\fP ]   	T{
> +ESC [ 16 ; \fIn\fP ]	T{
>  Set the cursor blink interval in milliseconds
>  (since Linux 4.2).
>  T}
> diff --git a/man4/initrd.4 b/man4/initrd.4
> index a10736456..e41917817 100644
> --- a/man4/initrd.4
> +++ b/man4/initrd.4
> @@ -75,7 +75,7 @@ is a read-only block device.
>  This device is a RAM disk that is initialized (e.g., loaded)
>  by the boot loader before the kernel is started.
>  The kernel then can use
> -.IR /dev/initrd "'s "
> +.IR /dev/initrd "'s"
>  contents for a two-phase system boot-up.
>  .PP
>  In the first boot-up phase, the kernel starts up
> diff --git a/man4/loop.4 b/man4/loop.4
> index 510ed88a7..1623cad0e 100644
> --- a/man4/loop.4
> +++ b/man4/loop.4
> @@ -42,7 +42,7 @@ You could do
>  .in +4n
>  .EX
>  $ \fBdd if=/dev/zero of=file.img bs=1MiB count=10\fP
> -$ \fBsudo losetup /dev/loop4 file.img \fP
> +$ \fBsudo losetup /dev/loop4 file.img\fP
>  $ \fBsudo mkfs -t ext4 /dev/loop4\fP
>  $ \fBsudo mkdir /myloopdev\fP
>  $ \fBsudo mount /dev/loop4 /myloopdev\fP
> 


-- 
Michael Kerrisk
Linux man-pages maintainer; http://www.kernel.org/doc/man-pages/
Linux/UNIX System Programming Training: http://man7.org/training/