From: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
To: unlisted-recipients:; (no To-header on input)
Cc: linuxarm@huawei.com, mauro.chehab@huawei.com,
Mauro Carvalho Chehab <mchehab+huawei@kernel.org>,
Deepak R Varma <drv@mailo.com>,
Ding Xiang <dingxiang@cmss.chinamobile.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
Nathan Chancellor <nathan@kernel.org>,
Robert Foss <robert.foss@linaro.org>,
Sakari Ailus <sakari.ailus@linux.intel.com>,
Yang Li <abaci-bugfix@linux.alibaba.com>,
Zheng Yongjun <zhengyongjun3@huawei.com>,
linux-kernel@vger.kernel.org, linux-media@vger.kernel.org,
linux-staging@lists.linux.dev
Subject: [PATCH v2 05/12] media: atomisp: sh_css_params: remove tests for ISP2401
Date: Wed, 17 Nov 2021 09:56:47 +0000 [thread overview]
Message-ID: <037de9f2b2c1a1c250f166134b9aec47c1298f83.1637142905.git.mchehab+huawei@kernel.org> (raw)
In-Reply-To: <cover.1637142905.git.mchehab+huawei@kernel.org>
Those tests are related to the input system, which is the same
for the chosen firmware, so both ISP2400 and ISP2401 will be
identical with that regards.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
To avoid mailbombing on a large number of people, only mailing lists were C/C on the cover.
See [PATCH v2 00/12] at: https://lore.kernel.org/all/cover.1637142905.git.mchehab+huawei@kernel.org/
.../staging/media/atomisp/pci/sh_css_params.c | 117 ++----------------
1 file changed, 8 insertions(+), 109 deletions(-)
diff --git a/drivers/staging/media/atomisp/pci/sh_css_params.c b/drivers/staging/media/atomisp/pci/sh_css_params.c
index 448b07162382..68d8f54473ea 100644
--- a/drivers/staging/media/atomisp/pci/sh_css_params.c
+++ b/drivers/staging/media/atomisp/pci/sh_css_params.c
@@ -104,15 +104,10 @@
(sizeof(char) * (binary)->in_frame_info.res.height * \
(binary)->in_frame_info.padded_width)
-#define ISP2400_SCTBL_BYTES(binary) \
+#define SCTBL_BYTES(binary) \
(sizeof(unsigned short) * (binary)->sctbl_height * \
(binary)->sctbl_aligned_width_per_color * IA_CSS_SC_NUM_COLORS)
-#define ISP2401_SCTBL_BYTES(binary) \
- (sizeof(unsigned short) * max((binary)->sctbl_height, (binary)->sctbl_legacy_height) * \
- /* height should be the larger height between new api and legacy api */ \
- (binary)->sctbl_aligned_width_per_color * IA_CSS_SC_NUM_COLORS)
-
#define MORPH_PLANE_BYTES(binary) \
(SH_CSS_MORPH_TABLE_ELEM_BYTES * (binary)->morph_tbl_aligned_width * \
(binary)->morph_tbl_height)
@@ -1611,18 +1606,6 @@ ia_css_set_param_exceptions(const struct ia_css_pipe *pipe,
params->dp_config.r = params->wb_config.r;
params->dp_config.b = params->wb_config.b;
params->dp_config.gb = params->wb_config.gb;
-
- if (IS_ISP2401) {
- assert(pipe);
- assert(pipe->mode < IA_CSS_PIPE_ID_NUM);
-
- if (pipe->mode < IA_CSS_PIPE_ID_NUM) {
- params->pipe_dp_config[pipe->mode].gr = params->wb_config.gr;
- params->pipe_dp_config[pipe->mode].r = params->wb_config.r;
- params->pipe_dp_config[pipe->mode].b = params->wb_config.b;
- params->pipe_dp_config[pipe->mode].gb = params->wb_config.gb;
- }
- }
}
/* ISP2401 */
@@ -2072,16 +2055,6 @@ sh_css_init_isp_params_from_config(struct ia_css_pipe *pipe,
params->output_frame = config->output_frame;
params->isp_parameters_id = config->isp_config_id;
- /* Currently we do not offer CSS interface to set different
- * configurations for DPC, i.e. depending on DPC being enabled
- * before (NORM+OBC) or after. The folllowing code to set the
- * DPC configuration should be updated when this interface is made
- * available */
- if (IS_ISP2401) {
- sh_css_set_dp_config(pipe, params, config->dp_config);
- ia_css_set_param_exceptions(pipe, params);
- }
-
if (0 ==
sh_css_select_dp_10bpp_config(pipe, &is_dp_10bpp)) {
/* return an error when both DPC and BDS is enabled by the
@@ -2096,8 +2069,7 @@ sh_css_init_isp_params_from_config(struct ia_css_pipe *pipe,
goto exit;
}
- if (!IS_ISP2401)
- ia_css_set_param_exceptions(pipe, params);
+ ia_css_set_param_exceptions(pipe, params);
exit:
IA_CSS_LEAVE_ERR_PRIVATE(err);
@@ -2514,29 +2486,7 @@ sh_css_init_isp_params_from_global(struct ia_css_stream *stream,
ia_css_set_ob_config(params, &default_ob_config);
ia_css_set_dp_config(params, &default_dp_config);
- if (!IS_ISP2401) {
- ia_css_set_param_exceptions(pipe_in, params);
- } else {
- for (i = 0; i < stream->num_pipes; i++) {
- if (sh_css_select_dp_10bpp_config(stream->pipes[i],
- &is_dp_10bpp) == 0) {
- /* set the return value as false if both DPC and
- * BDS is enabled by the user. But we do not return
- * the value immediately to enable internal firmware
- * feature testing. */
- if (is_dp_10bpp) {
- sh_css_set_dp_config(stream->pipes[i], params, &default_dp_10bpp_config);
- } else {
- sh_css_set_dp_config(stream->pipes[i], params, &default_dp_config);
- }
- } else {
- retval = false;
- goto exit;
- }
-
- ia_css_set_param_exceptions(stream->pipes[i], params);
- }
- }
+ ia_css_set_param_exceptions(pipe_in, params);
ia_css_set_de_config(params, &default_de_config);
ia_css_set_gc_config(params, &default_gc_config);
@@ -2641,20 +2591,9 @@ sh_css_init_isp_params_from_global(struct ia_css_stream *stream,
retval = false;
goto exit;
}
- if (IS_ISP2401) {
- if (stream->pipes[i]->mode < IA_CSS_PIPE_ID_NUM) {
- sh_css_set_dp_config(stream->pipes[i], params,
- &stream_params->pipe_dp_config[stream->pipes[i]->mode]);
- ia_css_set_param_exceptions(stream->pipes[i], params);
- } else {
- retval = false;
- goto exit;
- }
- }
}
- if (!IS_ISP2401)
- ia_css_set_param_exceptions(pipe_in, params);
+ ia_css_set_param_exceptions(pipe_in, params);
params->fpn_config.data = stream_params->fpn_config.data;
params->config_changed[IA_CSS_FPN_ID] =
@@ -2806,10 +2745,7 @@ int ia_css_pipe_set_bci_scaler_lut(struct ia_css_pipe *pipe,
pipe->scaler_pp_lut = mmgr_NULL;
if (!stream_started) {
- if (!IS_ISP2401)
- pipe->scaler_pp_lut = hmm_alloc(sizeof(zoom_table), HMM_BO_PRIVATE, 0, NULL, 0);
- else
- pipe->scaler_pp_lut = sh_css_params_alloc_gdc_lut();
+ pipe->scaler_pp_lut = hmm_alloc(sizeof(zoom_table), HMM_BO_PRIVATE, 0, NULL, 0);
if (pipe->scaler_pp_lut == mmgr_NULL) {
ia_css_debug_dtrace(IA_CSS_DEBUG_ERROR,
@@ -2851,10 +2787,7 @@ int sh_css_params_map_and_store_default_gdc_lut(void)
host_lut_store((void *)zoom_table);
- if (!IS_ISP2401)
- default_gdc_lut = hmm_alloc(sizeof(zoom_table), HMM_BO_PRIVATE, 0, NULL, 0);
- else
- default_gdc_lut = sh_css_params_alloc_gdc_lut();
+ default_gdc_lut = hmm_alloc(sizeof(zoom_table), HMM_BO_PRIVATE, 0, NULL, 0);
if (default_gdc_lut == mmgr_NULL)
return -ENOMEM;
@@ -3450,18 +3383,12 @@ sh_css_params_write_to_ddr_internal(
if (binary->info->sp.enable.sc) {
u32 enable_conv;
- size_t bytes;
-
- if (!IS_ISP2401)
- bytes = ISP2400_SCTBL_BYTES(binary);
- else
- bytes = ISP2401_SCTBL_BYTES(binary);
enable_conv = params->shading_settings.enable_shading_table_conversion;
buff_realloced = reallocate_buffer(&ddr_map->sc_tbl,
&ddr_map_size->sc_tbl,
- bytes,
+ SCTBL_BYTES(binary),
params->sc_table_changed,
&err);
if (err) {
@@ -3546,28 +3473,6 @@ sh_css_params_write_to_ddr_internal(
}
}
- /* DPC configuration is made pipe specific to allow flexibility in positioning of the
- * DPC kernel. The code below sets the pipe specific configuration to
- * individual binaries. */
- if (IS_ISP2401 &&
- params->pipe_dpc_config_changed[pipe_id] && binary->info->sp.enable.dpc) {
- unsigned int size =
- stage->binary->info->mem_offsets.offsets.param->dmem.dp.size;
-
- unsigned int offset =
- stage->binary->info->mem_offsets.offsets.param->dmem.dp.offset;
-
- if (size) {
- ia_css_dp_encode((struct sh_css_isp_dp_params *)
- &binary->mem_params.params[IA_CSS_PARAM_CLASS_PARAM][IA_CSS_ISP_DMEM].address[offset],
- ¶ms->pipe_dp_config[pipe_id], size);
-
- params->isp_params_changed = true;
- params->isp_mem_params_changed[pipe_id][stage->stage_num][IA_CSS_ISP_DMEM] =
- true;
- }
- }
-
if (params->config_changed[IA_CSS_MACC_ID] && binary->info->sp.enable.macc) {
unsigned int i, j, idx;
unsigned int idx_map[] = {
@@ -3649,13 +3554,7 @@ sh_css_params_write_to_ddr_internal(
if (!params->pipe_dvs_6axis_config[pipe_id]) {
struct ia_css_resolution dvs_offset = {0};
- if (!IS_ISP2401) {
- dvs_offset.width = (PIX_SHIFT_FILTER_RUN_IN_X + binary->dvs_envelope.width) / 2;
- } else {
- if (binary->dvs_envelope.width || binary->dvs_envelope.height) {
- dvs_offset.width = (PIX_SHIFT_FILTER_RUN_IN_X + binary->dvs_envelope.width) / 2;
- }
- }
+ dvs_offset.width = (PIX_SHIFT_FILTER_RUN_IN_X + binary->dvs_envelope.width) / 2;
dvs_offset.height = (PIX_SHIFT_FILTER_RUN_IN_Y + binary->dvs_envelope.height) / 2;
params->pipe_dvs_6axis_config[pipe_id] =
--
2.33.1
next prev parent reply other threads:[~2021-11-17 9:57 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-17 9:56 [PATCH v2 00/12] media: atomisp: reduce the gap for ISP2401 Mauro Carvalho Chehab
2021-11-17 9:56 ` [PATCH v2 01/12] media: atomisp: drop empty files Mauro Carvalho Chehab
2021-11-17 9:56 ` [PATCH v2 02/12] media: atomisp: simplify sh_css_defs.h Mauro Carvalho Chehab
2021-11-17 9:56 ` [PATCH v2 03/12] media: atomisp: sh_css_metrics: drop some unused code Mauro Carvalho Chehab
2021-11-17 9:56 ` [PATCH v2 04/12] media: atomisp: sh_css_mipi: cleanup the code Mauro Carvalho Chehab
2021-11-17 9:56 ` Mauro Carvalho Chehab [this message]
2021-11-17 9:56 ` [PATCH v2 06/12] media: atomisp: sh_css_params: " Mauro Carvalho Chehab
2021-11-17 9:56 ` [PATCH v2 07/12] media: atomisp: remove #ifdef HAS_NO_HMEM Mauro Carvalho Chehab
2021-11-17 9:56 ` [PATCH v2 08/12] media: atomisp: get rid of USE_WINDOWS_BINNING_FACTOR tests Mauro Carvalho Chehab
2021-11-17 9:56 ` [PATCH v2 09/12] media: atomisp: get rid of #ifdef HAS_BL Mauro Carvalho Chehab
2021-11-17 9:56 ` [PATCH v2 10/12] media: atomisp: get rid of sctbl_legacy_* Mauro Carvalho Chehab
2021-11-17 9:56 ` [PATCH v2 11/12] media: atomisp: sh_css_param_shading: fix comments coding style Mauro Carvalho Chehab
2021-11-17 9:56 ` [PATCH v2 12/12] media: atomisp: sh_css_sp: better support the current firmware Mauro Carvalho Chehab
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=037de9f2b2c1a1c250f166134b9aec47c1298f83.1637142905.git.mchehab+huawei@kernel.org \
--to=mchehab+huawei@kernel.org \
--cc=abaci-bugfix@linux.alibaba.com \
--cc=dingxiang@cmss.chinamobile.com \
--cc=drv@mailo.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-staging@lists.linux.dev \
--cc=linuxarm@huawei.com \
--cc=mauro.chehab@huawei.com \
--cc=mchehab@kernel.org \
--cc=nathan@kernel.org \
--cc=robert.foss@linaro.org \
--cc=sakari.ailus@linux.intel.com \
--cc=zhengyongjun3@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).