From: Helen Koike <helen.koike@collabora.com>
To: Hans Verkuil <hverkuil@xs4all.nl>
Cc: Linux Media Mailing List <linux-media@vger.kernel.org>
Subject: Re: vimc kernel warning and kernel oops
Date: Mon, 14 Jan 2019 10:47:26 -0200 [thread overview]
Message-ID: <04ee738f-bb04-338c-273c-366f052c7702@collabora.com> (raw)
In-Reply-To: <3a4770e4-851c-78fd-73c3-a919bd190347@xs4all.nl>
Hi Hans
On 1/11/19 1:25 PM, Hans Verkuil wrote:
> Hi Helen,
>
> I've started work to fix the last compliance failures with vimc so that
> vimc can be used in regression tests.
>
> But I found a kernel warning and a kernel oops using vimc from our master tree.
>
> To test, load vimc, then run:
>
> v4l2-ctl -d2 -v width=1920,height=1440
> v4l2-ctl -d2 --stream-mmap
>
> This is the first kernel warning:
>
> [ 671.799450] ------------[ cut here ]------------
> [ 671.799471] do not call blocking ops when !TASK_RUNNING; state=2 set at [<0000000050c41bbb>] vimc_sen_tpg_thread+0x0/0x110 [vimc_sensor]
> [ 671.799487] WARNING: CPU: 5 PID: 31428 at kernel/sched/core.c:6099 __might_sleep+0x63/0x70
> [ 671.799492] Modules linked in: vimc_scaler vimc_sensor v4l2_tpg vimc_capture videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 vimc_debayer videobuf2_common vimc_common vimc videodev media
> vmw_vsock_vmci_transport vmw_balloon vmwgfx ttm vmw_vmci button [last unloaded: media]
> [ 671.799515] CPU: 5 PID: 31428 Comm: vimc vimc.0-sen Not tainted 5.0.0-rc1-test-nl #23
> [ 671.799518] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 04/13/2018
> [ 671.799522] RIP: 0010:__might_sleep+0x63/0x70
> [ 671.799526] Code: 5b 5d 41 5c e9 3e ff ff ff 48 8b 90 f0 20 00 00 48 8b 70 10 48 c7 c7 98 79 30 82 c6 05 91 fb 5b 01 01 48 89 d1 e8 14 91 fd ff <0f> 0b eb ca 66 0f 1f 84 00 00 00 00 00 55 53 48 83
> ec 08 65 48 8b
> [ 671.799529] RSP: 0018:ffffc90016457ec8 EFLAGS: 00010282
> [ 671.799532] RAX: 0000000000000000 RBX: ffffffffa00ec398 RCX: 0000000000000000
> [ 671.799535] RDX: 0000000000000007 RSI: ffffffff8232b345 RDI: 00000000ffffffff
> [ 671.799537] RBP: 0000000000000039 R08: 0000000000000000 R09: 0000000000000000
> [ 671.799540] R10: 000000007e7cfc77 R11: ffffc90016457d70 R12: 0000000000000000
> [ 671.799542] R13: ffff88842afc4168 R14: ffff88842afc4000 R15: ffffffffa00eb0e0
> [ 671.799545] FS: 0000000000000000(0000) GS:ffff88842ed40000(0000) knlGS:0000000000000000
> [ 671.799585] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> [ 671.799587] CR2: 000056027a051cc0 CR3: 00000004136ec000 CR4: 00000000003406e0
> [ 671.799615] Call Trace:
> [ 671.799624] vimc_sen_tpg_thread+0x72/0x110 [vimc_sensor]
> [ 671.799632] kthread+0x113/0x130
> [ 671.799637] ? kthread_create_on_node+0x60/0x60
> [ 671.799645] ret_from_fork+0x22/0x40
> [ 671.799653] ---[ end trace 9048b36dd38333b9 ]---
>
> The cause is that set_current_state(TASK_UNINTERRUPTIBLE); is called too early,
> it should be called just before the schedule_timeout().
>
> The kernel oops follows the warning:
>
> [ 671.800597] BUG: unable to handle kernel NULL pointer dereference at 0000000000000004
> [ 671.800600] #PF error: [normal kernel read fault]
> [ 671.800602] PGD 0 P4D 0
> [ 671.800606] Oops: 0000 [#1] PREEMPT SMP
> [ 671.800609] CPU: 5 PID: 31428 Comm: vimc vimc.0-sen Tainted: G W 5.0.0-rc1-test-nl #23
> [ 671.800610] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 04/13/2018
> [ 671.800615] RIP: 0010:vimc_deb_process_frame+0x14b/0x2b0 [vimc_debayer]
> [ 671.800617] Code: 4c 24 08 41 89 f0 48 8d 1c 12 8d 4e ff 45 0f af c4 48 89 5c 24 10 48 89 4c 24 18 48 8b 4c 24 08 89 fa 83 e2 01 48 03 54 24 10 <44> 8b 4c 91 04 44 89 c1 4a 8d 6c 8c 38 44 8b 55 00
> 85 f6 74 32 48
> [ 671.800619] RSP: 0018:ffffc90016457e38 EFLAGS: 00010246
> [ 671.800622] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
> [ 671.800623] RDX: 0000000000000000 RSI: 0000000000000003 RDI: 0000000000000000
> [ 671.800625] RBP: ffff888422331b40 R08: 0000000000000000 R09: 0000000000000001
> [ 671.800628] R10: 00000000000001df R11: 0000000000000001 R12: 0000000000000000
> [ 671.800630] R13: 0000000000000000 R14: 0000000000000280 R15: ffff88842a465800
> [ 671.800632] FS: 0000000000000000(0000) GS:ffff88842ed40000(0000) knlGS:0000000000000000
> [ 671.800635] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> [ 671.800637] CR2: 0000000000000004 CR3: 00000004136ec000 CR4: 00000000003406e0
> [ 671.800641] Call Trace:
> [ 671.800647] ? vimc_sen_enum_mbus_code+0x30/0x30 [vimc_sensor]
> [ 671.800651] vimc_propagate_frame+0x8f/0xa0 [vimc_common]
> [ 671.800655] vimc_sen_tpg_thread+0xcb/0x110 [vimc_sensor]
> [ 671.800660] kthread+0x113/0x130
> [ 671.800663] ? kthread_create_on_node+0x60/0x60
> [ 671.800667] ret_from_fork+0x22/0x40
> [ 671.800671] Modules linked in: vimc_scaler vimc_sensor v4l2_tpg vimc_capture videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 vimc_debayer videobuf2_common vimc_common vimc videodev media
> vmw_vsock_vmci_transport vmw_balloon vmwgfx ttm vmw_vmci button [last unloaded: media]
> [ 671.800681] CR2: 0000000000000004
> [ 671.800685] ---[ end trace 9048b36dd38333ba ]---
>
> The reason for this is that in vimc_deb_s_stream() this call:
>
> vdeb->sink_pix_map = vimc_deb_pix_map_by_code(vdeb->sink_fmt.code);
>
> sets vdeb->sink_pix_map to NULL since vdeb->sink_fmt.code isn't a Bayer code, but
> s_stream just continues without returning an error.
>
> The core problem is that sink_fmt.code is initialized with a code that isn't legal
> for the debayer subdev:
>
> $ v4l2-ctl -d /dev/v4l-subdev2 --get-subdev-fmt --list-subdev-mbus-codes 0
> ioctl: VIDIOC_SUBDEV_G_FMT (pad=0)
> Width/Height : 640/480
> Mediabus Code : 0x100a (MEDIA_BUS_FMT_RGB888_1X24)
> Field : None
> Colorspace : Default
> Transfer Function : Default (maps to Rec. 709)
> YCbCr/HSV Encoding: Default (maps to ITU-R 601)
> Quantization : Default (maps to Full Range)
> ioctl: VIDIOC_SUBDEV_ENUM_MBUS_CODE (pad=0)
> 0x3001: MEDIA_BUS_FMT_SBGGR8_1X8
> 0x3013: MEDIA_BUS_FMT_SGBRG8_1X8
> 0x3002: MEDIA_BUS_FMT_SGRBG8_1X8
> 0x3014: MEDIA_BUS_FMT_SRGGB8_1X8
> 0x3007: MEDIA_BUS_FMT_SBGGR10_1X10
> 0x300e: MEDIA_BUS_FMT_SGBRG10_1X10
> 0x300a: MEDIA_BUS_FMT_SGRBG10_1X10
> 0x300f: MEDIA_BUS_FMT_SRGGB10_1X10
> 0x3008: MEDIA_BUS_FMT_SBGGR12_1X12
> 0x3010: MEDIA_BUS_FMT_SGBRG12_1X12
> 0x3011: MEDIA_BUS_FMT_SGRBG12_1X12
> 0x3012: MEDIA_BUS_FMT_SRGGB12_1X12
>
> That's obviously not right.
>
> Can you take a look at these issues?
Sure, I'll take a look, thanks for reporting it.
Helen
>
> Thanks!
>
> Hans
>
next prev parent reply other threads:[~2019-01-14 12:47 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-11 15:25 vimc kernel warning and kernel oops Hans Verkuil
2019-01-14 12:47 ` Helen Koike [this message]
2019-02-16 11:12 ` Hans Verkuil
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=04ee738f-bb04-338c-273c-366f052c7702@collabora.com \
--to=helen.koike@collabora.com \
--cc=hverkuil@xs4all.nl \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).