From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-19.3 required=3.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,FREEMAIL_FORGED_FROMDOMAIN,FREEMAIL_FROM, HEADER_FROM_DIFFERENT_DOMAINS,INCLUDES_CR_TRAILER,INCLUDES_PATCH, MAILING_LIST_MULTI,MENTIONS_GIT_HOSTING,NICE_REPLY_A,SPF_HELO_NONE,SPF_PASS, USER_AGENT_SANE_1 autolearn=ham autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 84208C433E0 for ; Mon, 15 Mar 2021 09:14:02 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 3263B64E31 for ; Mon, 15 Mar 2021 09:14:02 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S229548AbhCOJN1 (ORCPT ); Mon, 15 Mar 2021 05:13:27 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:39330 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S229519AbhCOJN1 (ORCPT ); Mon, 15 Mar 2021 05:13:27 -0400 Received: from mail-wm1-x330.google.com (mail-wm1-x330.google.com [IPv6:2a00:1450:4864:20::330]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 53829C061574; Mon, 15 Mar 2021 02:13:26 -0700 (PDT) Received: by mail-wm1-x330.google.com with SMTP id d139-20020a1c1d910000b029010b895cb6f2so18966090wmd.5; Mon, 15 Mar 2021 02:13:26 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20161025; h=subject:to:cc:references:from:message-id:date:user-agent :mime-version:in-reply-to:content-transfer-encoding:content-language; bh=2fBGu/di+34VxPvWokpCtMeAXjdavQeecygaOUmdzyU=; b=H2Tji7ifDfP9W4lu8Pv6wrjSPi+dEbPBqPCLT0g3037rqNc4AfcV/Xy3+cm9UfN2Ql l7/FDvu+98ZeHiKrzHFAxG3XS4zggKuxS5HEmrV5Y9MCkn8v3QSADjuM2shbJ7hcUdi0 fRG/2QWKbprtey2N+cPXBQ8KRCZ68Vasoogrq+K4dj0ceKTIKIRn+VU1+qVWFymlHWu9 q6Qd5qPrz7kV5vHHpXzYzA51WKiuAU5fZRFmZIEK3eHtzrRyeIfvdE9lRfNmwwcwBwbx HuP0hWFTCdjwQ6bTqn7InCLB0mVZz8f67bBIqc17ftk5pzoCrVQzBDCigrM3iGF8FrOg 2gWQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:subject:to:cc:references:from:message-id:date :user-agent:mime-version:in-reply-to:content-transfer-encoding :content-language; bh=2fBGu/di+34VxPvWokpCtMeAXjdavQeecygaOUmdzyU=; b=iP4fPv+V9jE78gAevqvPFp7Id66V/m+j5HVCf8JCeIjOxmigp8KSYjdFJOOk1yor4y 5dC9umMkGWQ2Yz7+qjzHHQXNpmxrwhqb0uS3SkmEum6Dc8uG7uKATJctcTssIqllnHOi GUTijYlsjfaj2O6Lq14r8LHP3MUpyGwUG82fi7HBKVxjSu1VJ6FDGnNTAf7XB2Tpm5+d +bokTlWiaQ+HtpEhueX//iHSHvgQjSOT3MkEGr+HgdHxitRv6DnWt29OmxwZhRhwQVwv q6h+R94IU2eZdqNjpM9vzvCKSW0RCBdDIIkLxd+5y3f8AiSuHZcLJDsV7dfy1zCqqmOT waLg== X-Gm-Message-State: AOAM533veFEA8VF7eSVkgNs8cn4gcMR5fCR/7WsinR1G1lsHXDgNCjaP xLkLzjp3i1NNCzopCH/Imoo= X-Google-Smtp-Source: ABdhPJytLIHLLwwiwokOPGLYFCP5fRh3/CIfxSCmoD1B8jU4OjqJnfzXMCjRl9eZ/5HQeeJExrH5Ng== X-Received: by 2002:a1c:f212:: with SMTP id s18mr25350186wmc.133.1615799604729; Mon, 15 Mar 2021 02:13:24 -0700 (PDT) Received: from [192.168.1.211] ([2.29.208.22]) by smtp.gmail.com with ESMTPSA id k12sm18753929wrx.7.2021.03.15.02.13.23 (version=TLS1_3 cipher=TLS_AES_128_GCM_SHA256 bits=128/128); Mon, 15 Mar 2021 02:13:23 -0700 (PDT) Subject: Re: [PATCH 1/1] media: i2c: Add support for ov5693 sensor To: Laurent Pinchart Cc: linux-kernel@vger.kernel.org, linux-media@vger.kernel.org, mchehab@kernel.org, sakari.ailus@linux.intel.com, bingbu.cao@intel.com, kieran.bingham+renesas@ideasonboard.com, jacopo+renesas@jmondi.org, dongchun.zhu@mediatek.com, tian.shu.qiu@intel.com, luzmaximilian@gmail.com, me@fabwu.ch, jeanmichel.hautbois@ideasonboard.com, kitakar@gmail.com, jorhand@linux.microsoft.com References: <20210312103239.279523-1-djrscally@gmail.com> <20210312103239.279523-2-djrscally@gmail.com> From: Daniel Scally Message-ID: <0e0349d7-6f0a-dae4-441b-60ea69338b0e@gmail.com> Date: Mon, 15 Mar 2021 09:13:22 +0000 User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:68.0) Gecko/20100101 Thunderbird/68.10.0 MIME-Version: 1.0 In-Reply-To: Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 7bit Content-Language: en-US Precedence: bulk List-ID: X-Mailing-List: linux-media@vger.kernel.org Hi Laurent On 14/03/2021 23:29, Laurent Pinchart wrote: > Hi Daniel, > > Thank you for the patch. > > On Fri, Mar 12, 2021 at 10:32:39AM +0000, Daniel Scally wrote: >> The OV5693 is a 5 Mpx CMOS image sensor, connected via MIPI CSI-2. The >> chip is capable of a single lane configuration, but currently only two >> lanes are supported. >> >> Most of the sensor's features are supported, with the main exception >> being the lens correction algorithm. >> >> The driver provides all mandatory, optional and recommended V4L2 controls >> for maximum compatibility with libcamera. >> >> Signed-off-by: Daniel Scally >> --- >> MAINTAINERS | 7 + >> drivers/media/i2c/Kconfig | 11 + >> drivers/media/i2c/Makefile | 1 + >> drivers/media/i2c/ov5693.c | 1585 ++++++++++++++++++++++++++++++++++++ >> 4 files changed, 1604 insertions(+) >> create mode 100644 drivers/media/i2c/ov5693.c >> >> diff --git a/MAINTAINERS b/MAINTAINERS >> index cf44b3e77b90..34311d55b189 100644 >> --- a/MAINTAINERS >> +++ b/MAINTAINERS >> @@ -13140,6 +13140,13 @@ S: Maintained >> T: git git://linuxtv.org/media_tree.git >> F: drivers/media/i2c/ov5675.c >> >> +OMNIVISION OV5693 SENSOR DRIVER >> +M: Daniel Scally >> +L: linux-media@vger.kernel.org >> +S: Maintained >> +T: git git://linuxtv.org/media_tree.git >> +F: drivers/media/i2c/ov5693.c >> + >> OMNIVISION OV5695 SENSOR DRIVER >> M: Shunqian Zheng >> L: linux-media@vger.kernel.org >> diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig >> index 4c1ae687ab10..4da2278ec84c 100644 >> --- a/drivers/media/i2c/Kconfig >> +++ b/drivers/media/i2c/Kconfig >> @@ -985,6 +985,17 @@ config VIDEO_OV5675 >> To compile this driver as a module, choose M here: the >> module will be called ov5675. >> >> +config VIDEO_OV5693 >> + tristate "OmniVision OV5693 sensor support" >> + depends on I2C && VIDEO_V4L2 >> + select V4L2_FWNODE >> + help >> + This is a Video4Linux2 sensor driver for the OmniVision >> + OV5693 camera. >> + >> + To compile this driver as a module, choose M here: the >> + module will be called ov5693. >> + >> config VIDEO_OV5695 >> tristate "OmniVision OV5695 sensor support" >> depends on I2C && VIDEO_V4L2 >> diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile >> index 65cfc94d25b6..7df680e110c9 100644 >> --- a/drivers/media/i2c/Makefile >> +++ b/drivers/media/i2c/Makefile >> @@ -75,6 +75,7 @@ obj-$(CONFIG_VIDEO_OV5647) += ov5647.o >> obj-$(CONFIG_VIDEO_OV5648) += ov5648.o >> obj-$(CONFIG_VIDEO_OV5670) += ov5670.o >> obj-$(CONFIG_VIDEO_OV5675) += ov5675.o >> +obj-$(CONFIG_VIDEO_OV5693) += ov5693.o >> obj-$(CONFIG_VIDEO_OV5695) += ov5695.o >> obj-$(CONFIG_VIDEO_OV6650) += ov6650.o >> obj-$(CONFIG_VIDEO_OV7251) += ov7251.o >> diff --git a/drivers/media/i2c/ov5693.c b/drivers/media/i2c/ov5693.c >> new file mode 100644 >> index 000000000000..0460371164ea >> --- /dev/null >> +++ b/drivers/media/i2c/ov5693.c >> @@ -0,0 +1,1585 @@ >> +// SPDX-License-Identifier: GPL-2.0 >> +/* >> + * Copyright (c) 2013 Intel Corporation. All Rights Reserved. >> + * >> + * Adapted from the atomisp-ov5693 driver, with contributions from: >> + * >> + * Daniel Scally >> + * Jean-Michel Hautbois >> + * Fabian Wuthrich >> + * Tsuchiya Yuto >> + * Jordan Hand >> + * Jake Day >> + */ >> + >> +#include >> +#include >> +#include >> +#include >> +#include >> +#include >> +#include >> +#include >> +#include >> +#include >> +#include >> +#include >> +#include > You've nearly mastered the alphabetical order ;-) Hah, only so long as it occurs to me to do so. > >> + >> +/* System Control */ >> +#define OV5693_SW_RESET_REG 0x0103 >> +#define OV5693_SW_STREAM_REG 0x0100 >> +#define OV5693_START_STREAMING 0x01 >> +#define OV5693_STOP_STREAMING 0x00 >> +#define OV5693_SW_RESET 0x01 >> + >> +#define OV5693_REG_CHIP_ID_H 0x300A >> +#define OV5693_REG_CHIP_ID_L 0x300B >> +/* Yes, this is right. The datasheet for the OV5693 gives its ID as 0x5690 */ >> +#define OV5693_CHIP_ID 0x5690 >> + >> +/* Exposure */ >> +#define OV5693_EXPOSURE_L_CTRL_HH_REG 0x3500 >> +#define OV5693_EXPOSURE_L_CTRL_H_REG 0x3501 >> +#define OV5693_EXPOSURE_L_CTRL_L_REG 0x3502 >> +#define OV5693_EXPOSURE_S_CTRL_HH_REG 0x3506 >> +#define OV5693_EXPOSURE_S_CTRL_H_REG 0x3507 >> +#define OV5693_EXPOSURE_S_CTRL_L_REG 0x3508 >> +#define OV5693_EXPOSURE_CTRL_HH(v) (((v) & GENMASK(14, 12)) >> 12) >> +#define OV5693_EXPOSURE_CTRL_H(v) (((v) & GENMASK(11, 4)) >> 4) >> +#define OV5693_EXPOSURE_CTRL_L(v) (((v) & GENMASK(3, 0)) << 4) >> +#define OV5693_INTEGRATION_TIME_MARGIN 8 >> +#define OV5693_EXPOSURE_MIN 1 >> +#define OV5693_EXPOSURE_STEP 1 >> + >> +/* Analogue Gain */ >> +#define OV5693_GAIN_CTRL_H_REG 0x350A >> +#define OV5693_GAIN_CTRL_H(v) (((v) >> 4) & GENMASK(2, 0)) >> +#define OV5693_GAIN_CTRL_L_REG 0x350B >> +#define OV5693_GAIN_CTRL_L(v) (((v) << 4) & GENMASK(7, 4)) >> +#define OV5693_GAIN_MIN 1 >> +#define OV5693_GAIN_MAX 127 >> +#define OV5693_GAIN_DEF 8 >> +#define OV5693_GAIN_STEP 1 >> + >> +/* Digital Gain */ >> +#define OV5693_MWB_RED_GAIN_H_REG 0x3400 >> +#define OV5693_MWB_RED_GAIN_L_REG 0x3401 >> +#define OV5693_MWB_GREEN_GAIN_H_REG 0x3402 >> +#define OV5693_MWB_GREEN_GAIN_L_REG 0x3403 >> +#define OV5693_MWB_BLUE_GAIN_H_REG 0x3404 >> +#define OV5693_MWB_BLUE_GAIN_L_REG 0x3405 >> +#define OV5693_MWB_GAIN_H_CTRL(v) (((v) >> 8) & GENMASK(3, 0)) >> +#define OV5693_MWB_GAIN_L_CTRL(v) ((v) & GENMASK(7, 0)) >> +#define OV5693_MWB_GAIN_MAX 0x0fff >> +#define OV5693_DIGITAL_GAIN_MIN 1 >> +#define OV5693_DIGITAL_GAIN_MAX 4095 >> +#define OV5693_DIGITAL_GAIN_DEF 1024 >> +#define OV5693_DIGITAL_GAIN_STEP 1 >> + >> +/* Timing and Format */ >> +#define OV5693_CROP_START_X_H_REG 0x3800 >> +#define OV5693_CROP_START_X_H(v) (((v) & GENMASK(12, 8)) >> 8) >> +#define OV5693_CROP_START_X_L_REG 0x3801 >> +#define OV5693_CROP_START_X_L(v) ((v) & GENMASK(7, 0)) >> + >> +#define OV5693_CROP_START_Y_H_REG 0x3802 >> +#define OV5693_CROP_START_Y_H(v) (((v) & GENMASK(11, 8)) >> 8) >> +#define OV5693_CROP_START_Y_L_REG 0x3803 >> +#define OV5693_CROP_START_Y_L(v) ((v) & GENMASK(7, 0)) >> + >> +#define OV5693_CROP_END_X_H_REG 0x3804 >> +#define OV5693_CROP_END_X_H(v) (((v) & GENMASK(12, 8)) >> 8) >> +#define OV5693_CROP_END_X_L_REG 0x3805 >> +#define OV5693_CROP_END_X_L(v) ((v) & GENMASK(7, 0)) >> + >> +#define OV5693_CROP_END_Y_H_REG 0x3806 >> +#define OV5693_CROP_END_Y_H(v) (((v) & GENMASK(11, 8)) >> 8) >> +#define OV5693_CROP_END_Y_L_REG 0x3807 >> +#define OV5693_CROP_END_Y_L(v) ((v) & GENMASK(7, 0)) >> + >> +#define OV5693_OUTPUT_SIZE_X_H_REG 0x3808 >> +#define OV5693_OUTPUT_SIZE_X_H(v) (((v) & GENMASK(15, 8)) >> 8) >> +#define OV5693_OUTPUT_SIZE_X_L_REG 0x3809 >> +#define OV5693_OUTPUT_SIZE_X_L(v) ((v) & GENMASK(7, 0)) >> + >> +#define OV5693_OUTPUT_SIZE_Y_H_REG 0x380a >> +#define OV5693_OUTPUT_SIZE_Y_H(v) (((v) & GENMASK(15, 8)) >> 8) >> +#define OV5693_OUTPUT_SIZE_Y_L_REG 0x380b >> +#define OV5693_OUTPUT_SIZE_Y_L(v) ((v) & GENMASK(7, 0)) >> + >> +#define OV5693_TIMING_HTS_H_REG 0x380c >> +#define OV5693_TIMING_HTS_H(v) (((v) & GENMASK(15, 8)) >> 8) >> +#define OV5693_TIMING_HTS_L_REG 0x380d >> +#define OV5693_TIMING_HTS_L(v) ((v) & GENMASK(7, 0)) >> + >> +#define OV5693_TIMING_VTS_H_REG 0x380e >> +#define OV5693_TIMING_VTS_H(v) (((v) & GENMASK(15, 8)) >> 8) >> +#define OV5693_TIMING_VTS_L_REG 0x380f >> +#define OV5693_TIMING_VTS_L(v) ((v) & GENMASK(7, 0)) >> +#define OV5693_TIMING_MAX_VTS 0xffff >> +#define OV5693_TIMING_MIN_VTS 0x04 >> + >> +#define OV5693_OFFSET_START_X_H_REG 0x3810 >> +#define OV5693_OFFSET_START_X_H(v) (((v) & GENMASK(15, 8)) >> 8) >> +#define OV5693_OFFSET_START_X_L_REG 0x3811 >> +#define OV5693_OFFSET_START_X_L(v) ((v) & GENMASK(7, 0)) >> + >> +#define OV5693_OFFSET_START_Y_H_REG 0x3812 >> +#define OV5693_OFFSET_START_Y_H(v) (((v) & GENMASK(15, 8)) >> 8) >> +#define OV5693_OFFSET_START_Y_L_REG 0x3813 >> +#define OV5693_OFFSET_START_Y_L(v) ((v) & GENMASK(7, 0)) >> + >> +#define OV5693_SUB_INC_X_REG 0x3814 >> +#define OV5693_SUB_INC_Y_REG 0x3815 >> + >> +#define OV5693_FORMAT1_REG 0x3820 >> +#define OV5693_FORMAT1_FLIP_VERT_ISP_EN BIT(2) >> +#define OV5693_FORMAT1_FLIP_VERT_SENSOR_EN BIT(1) >> +#define OV5693_FORMAT1_VBIN_EN BIT(0) >> +#define OV5693_FORMAT2_REG 0x3821 >> +#define OV5693_FORMAT2_HDR_EN BIT(7) >> +#define OV5693_FORMAT2_FLIP_HORZ_ISP_EN BIT(2) >> +#define OV5693_FORMAT2_FLIP_HORZ_SENSOR_EN BIT(1) >> +#define OV5693_FORMAT2_HBIN_EN BIT(0) >> + >> +#define OV5693_ISP_CTRL2_REG 0x5002 >> +#define OV5693_ISP_SCALE_ENABLE BIT(7) >> + >> +/* Pixel Array */ >> +#define OV5693_NATIVE_WIDTH 2624U >> +#define OV5693_NATIVE_HEIGHT 1956U >> +#define OV5693_ACTIVE_START_LEFT 16U >> +#define OV5693_ACTIVE_START_TOP 6U >> +#define OV5693_ACTIVE_WIDTH 2592U >> +#define OV5693_ACTIVE_HEIGHT 1944U >> + >> +/* Test Pattern */ >> +#define OV5693_TEST_PATTERN_REG 0x5e00 >> +#define OV5693_TEST_PATTERN_ENABLE BIT(7) >> +#define OV5693_TEST_PATTERN_ROLLING BIT(6) >> +#define OV5693_TEST_PATTERN_RANDOM 0x01 >> +#define OV5693_TEST_PATTERN_BARS 0x00 >> + >> +/* System Frequencies */ >> +#define OV5693_XVCLK_FREQ 19200000 >> +#define OV5693_LINK_FREQ_400MHZ 400000000 >> +#define OV5693_PIXEL_RATE 160000000 >> + >> +/* Miscellaneous */ >> +#define OV5693_NUM_MBUS_FMTS 1 >> +#define OV5693_NUM_SUPPLIES 2 >> + >> +#define to_ov5693_sensor(x) container_of(x, struct ov5693_device, sd) >> + >> +struct ov5693_reg { >> + u16 reg; >> + u8 val; >> +}; >> + >> +struct ov5693_reg_list { >> + u32 num_regs; >> + const struct ov5693_reg *regs; >> +}; >> + >> +struct ov5693_resolution { >> + char *desc; >> + int fps; >> + >> + struct v4l2_rect crop; >> + >> + unsigned int crop_start_x; >> + unsigned int offset_x; >> + unsigned int output_size_x; >> + unsigned int crop_end_x; >> + unsigned int hts; >> + >> + unsigned int crop_start_y; >> + unsigned int offset_y; >> + unsigned int output_size_y; >> + unsigned int crop_end_y; >> + unsigned int vts; >> + >> + unsigned int inc_x_odd; >> + unsigned int inc_x_even; >> + unsigned int inc_y_odd; >> + unsigned int inc_y_even; >> + >> + bool binning_x; >> + bool binning_y; >> + bool scale_enable; >> +}; >> + >> +struct ov5693_device { >> + struct i2c_client *client; >> + struct device *dev; >> + >> + /* Protect against concurrent changes to controls */ >> + struct mutex lock; >> + >> + struct gpio_desc *reset; >> + struct gpio_desc *powerdown; >> + struct regulator_bulk_data supplies[OV5693_NUM_SUPPLIES]; >> + struct clk *clk; >> + >> + const struct ov5693_resolution *mode; >> + bool streaming; >> + >> + struct v4l2_subdev sd; >> + struct media_pad pad; >> + >> + struct ov5693_v4l2_ctrls { >> + struct v4l2_ctrl_handler handler; >> + struct v4l2_ctrl *link_freq; >> + struct v4l2_ctrl *pixel_rate; >> + struct v4l2_ctrl *exposure; >> + struct v4l2_ctrl *analogue_gain; >> + struct v4l2_ctrl *digital_gain; >> + struct v4l2_ctrl *hflip; >> + struct v4l2_ctrl *vflip; >> + struct v4l2_ctrl *hblank; >> + struct v4l2_ctrl *vblank; >> + struct v4l2_ctrl *test_pattern; >> + } ctrls; >> +}; >> + >> +static const struct ov5693_reg ov5693_global_regs[] = { >> + {0x0103, 0x01}, >> + {0x3016, 0xf0}, >> + {0x3017, 0xf0}, >> + {0x3018, 0xf0}, >> + {0x3022, 0x01}, >> + {0x3028, 0x44}, >> + {0x3098, 0x02}, >> + {0x3099, 0x19}, >> + {0x309a, 0x02}, >> + {0x309b, 0x01}, >> + {0x309c, 0x00}, >> + {0x30a0, 0xd2}, >> + {0x30a2, 0x01}, >> + {0x30b2, 0x00}, >> + {0x30b3, 0x7d}, >> + {0x30b4, 0x03}, >> + {0x30b5, 0x04}, >> + {0x30b6, 0x01}, >> + {0x3104, 0x21}, >> + {0x3106, 0x00}, >> + {0x3406, 0x01}, >> + {0x3503, 0x07}, >> + {0x350b, 0x40}, >> + {0x3601, 0x0a}, >> + {0x3602, 0x38}, >> + {0x3612, 0x80}, >> + {0x3620, 0x54}, >> + {0x3621, 0xc7}, >> + {0x3622, 0x0f}, >> + {0x3625, 0x10}, >> + {0x3630, 0x55}, >> + {0x3631, 0xf4}, >> + {0x3632, 0x00}, >> + {0x3633, 0x34}, >> + {0x3634, 0x02}, >> + {0x364d, 0x0d}, >> + {0x364f, 0xdd}, >> + {0x3660, 0x04}, >> + {0x3662, 0x10}, >> + {0x3663, 0xf1}, >> + {0x3665, 0x00}, >> + {0x3666, 0x20}, >> + {0x3667, 0x00}, >> + {0x366a, 0x80}, >> + {0x3680, 0xe0}, >> + {0x3681, 0x00}, >> + {0x3700, 0x42}, >> + {0x3701, 0x14}, >> + {0x3702, 0xa0}, >> + {0x3703, 0xd8}, >> + {0x3704, 0x78}, >> + {0x3705, 0x02}, >> + {0x370a, 0x00}, >> + {0x370b, 0x20}, >> + {0x370c, 0x0c}, >> + {0x370d, 0x11}, >> + {0x370e, 0x00}, >> + {0x370f, 0x40}, >> + {0x3710, 0x00}, >> + {0x371a, 0x1c}, >> + {0x371b, 0x05}, >> + {0x371c, 0x01}, >> + {0x371e, 0xa1}, >> + {0x371f, 0x0c}, >> + {0x3721, 0x00}, >> + {0x3724, 0x10}, >> + {0x3726, 0x00}, >> + {0x372a, 0x01}, >> + {0x3730, 0x10}, >> + {0x3738, 0x22}, >> + {0x3739, 0xe5}, >> + {0x373a, 0x50}, >> + {0x373b, 0x02}, >> + {0x373c, 0x41}, >> + {0x373f, 0x02}, >> + {0x3740, 0x42}, >> + {0x3741, 0x02}, >> + {0x3742, 0x18}, >> + {0x3743, 0x01}, >> + {0x3744, 0x02}, >> + {0x3747, 0x10}, >> + {0x374c, 0x04}, >> + {0x3751, 0xf0}, >> + {0x3752, 0x00}, >> + {0x3753, 0x00}, >> + {0x3754, 0xc0}, >> + {0x3755, 0x00}, >> + {0x3756, 0x1a}, >> + {0x3758, 0x00}, >> + {0x3759, 0x0f}, >> + {0x376b, 0x44}, >> + {0x375c, 0x04}, >> + {0x3774, 0x10}, >> + {0x3776, 0x00}, >> + {0x377f, 0x08}, >> + {0x3780, 0x22}, >> + {0x3781, 0x0c}, >> + {0x3784, 0x2c}, >> + {0x3785, 0x1e}, >> + {0x378f, 0xf5}, >> + {0x3791, 0xb0}, >> + {0x3795, 0x00}, >> + {0x3796, 0x64}, >> + {0x3797, 0x11}, >> + {0x3798, 0x30}, >> + {0x3799, 0x41}, >> + {0x379a, 0x07}, >> + {0x379b, 0xb0}, >> + {0x379c, 0x0c}, >> + {0x3a04, 0x06}, >> + {0x3a05, 0x14}, >> + {0x3e07, 0x20}, >> + {0x4000, 0x08}, >> + {0x4001, 0x04}, >> + {0x4004, 0x08}, >> + {0x4006, 0x20}, >> + {0x4008, 0x24}, >> + {0x4009, 0x10}, >> + {0x4058, 0x00}, >> + {0x4101, 0xb2}, >> + {0x4307, 0x31}, >> + {0x4511, 0x05}, >> + {0x4512, 0x01}, >> + {0x481f, 0x30}, >> + {0x4826, 0x2c}, >> + {0x4d02, 0xfd}, >> + {0x4d03, 0xf5}, >> + {0x4d04, 0x0c}, >> + {0x4d05, 0xcc}, >> + {0x4837, 0x0a}, >> + {0x5003, 0x20}, >> + {0x5013, 0x00}, >> + {0x5842, 0x01}, >> + {0x5843, 0x2b}, >> + {0x5844, 0x01}, >> + {0x5845, 0x92}, >> + {0x5846, 0x01}, >> + {0x5847, 0x8f}, >> + {0x5848, 0x01}, >> + {0x5849, 0x0c}, >> + {0x5e10, 0x0c}, >> + {0x3820, 0x00}, >> + {0x3821, 0x1e}, >> + {0x5041, 0x14} >> +}; >> + >> +static const struct ov5693_reg_list ov5693_global_setting = { >> + .num_regs = ARRAY_SIZE(ov5693_global_regs), >> + .regs = ov5693_global_regs, >> +}; >> + >> +#define OV5693_NUM_RESOLUTIONS ARRAY_SIZE(ov5693_resolutions) >> +struct ov5693_resolution ov5693_resolutions[] = { > Could we avoid making this driver mode-based, given that we program > registers manually with the crop rectangle and binning configuration ? > We could implement the .set_selection() operation to configure the crop > rectangle, and control binning as the ratio between the crop rectangle > size and the output size. I honestly hadn't even thought about doing it that way, but I like that idea much more than the fixed modes yes. I'll switch to that for the v2 > >> + { >> + .desc = "ov5693_2592x1944_30fps", >> + .fps = 30, >> + >> + .crop_start_x = 16, >> + .offset_x = 0, >> + .output_size_x = 2592, >> + .crop_end_x = 2608, >> + .hts = 2688, >> + >> + .crop_start_y = 6, >> + .offset_y = 0, >> + .output_size_y = 1944, >> + .crop_end_y = 1950, >> + .vts = 1984, >> + >> + .inc_x_odd = 1, >> + .inc_x_even = 1, >> + .inc_y_odd = 1, >> + .inc_y_even = 1, >> + >> + .crop = { >> + .left = 16, >> + .top = 6, >> + .width = 2592, >> + .height = 1944 >> + }, >> + }, >> + { >> + .desc = "ov5693_1920x1080_30fps", >> + .fps = 30, >> + >> + .crop_start_x = 16, >> + .offset_x = 0, >> + .output_size_x = 1920, >> + .crop_end_x = 2608, >> + .hts = 2688, >> + >> + .crop_start_y = 249, >> + .offset_y = 0, >> + .output_size_y = 1080, >> + .crop_end_y = 1707, >> + .vts = 1984, >> + >> + .scale_enable = true, >> + >> + .inc_x_odd = 1, >> + .inc_x_even = 1, >> + .inc_y_odd = 1, >> + .inc_y_even = 1, >> + >> + .crop = { >> + .left = 16, >> + .top = 249, >> + .width = 2592, >> + .height = 1458 >> + }, >> + }, >> + { >> + .desc = "ov5693_1280x720_60fps", >> + .fps = 60, >> + >> + .crop_start_x = 32, >> + .offset_x = 0, >> + .output_size_x = 1280, >> + .crop_end_x = 2592, >> + .binning_x = true, >> + .hts = 2688, >> + >> + .crop_start_y = 252, >> + .offset_y = 0, >> + .output_size_y = 720, >> + .crop_end_y = 1692, >> + .binning_y = true, >> + .vts = 992, >> + >> + .inc_x_odd = 3, >> + .inc_x_even = 1, >> + .inc_y_odd = 3, >> + .inc_y_even = 1, >> + >> + .crop = { >> + .left = 32, >> + .top = 252, >> + .width = 2560, >> + .height = 1440 >> + }, >> + } >> +}; >> + >> +static const s64 link_freq_menu_items[] = { >> + OV5693_LINK_FREQ_400MHZ >> +}; >> + >> +static const char * const ov5693_supply_names[] = { >> + "avdd", >> + "dovdd", >> +}; >> + >> +static const char * const ov5693_test_pattern_menu[] = { >> + "Disabled", >> + "Random Data", >> + "Colour Bars", >> + "Colour Bars with Rolling Bar" >> +}; >> + >> +static const u8 ov5693_test_pattern_bits[] = { >> + 0, >> + OV5693_TEST_PATTERN_ENABLE | OV5693_TEST_PATTERN_RANDOM, >> + OV5693_TEST_PATTERN_ENABLE | OV5693_TEST_PATTERN_BARS, >> + OV5693_TEST_PATTERN_ENABLE | OV5693_TEST_PATTERN_BARS | >> + OV5693_TEST_PATTERN_ROLLING, >> +}; >> + >> +/* I2C I/O Operations */ >> + >> +static int ov5693_read_reg(struct ov5693_device *ov5693, u16 addr, u8 *value) >> +{ >> + unsigned char data[2] = { addr >> 8, addr & 0xff }; >> + struct i2c_client *client = ov5693->client; >> + int ret; >> + >> + ret = i2c_master_send(client, data, sizeof(data)); >> + if (ret < 0) { >> + dev_dbg(&client->dev, "i2c send error at address 0x%04x\n", >> + addr); >> + return ret; >> + } >> + >> + ret = i2c_master_recv(client, value, 1); >> + if (ret < 0) { >> + dev_dbg(&client->dev, "i2c recv error at address 0x%04x\n", >> + addr); >> + return ret; >> + } > This would allow another bus master to access the bus between the write > and the read. You should instead use i2c_transfer() with two messages. Ah, thanks, that also hadn't occurred to me but now you mention it seems obvious! > >> + >> + return 0; >> +} >> + >> +static void ov5693_write_reg(struct ov5693_device *ov5693, u16 addr, u8 value, >> + int *error) >> +{ >> + unsigned char data[3] = { addr >> 8, addr & 0xff, value }; >> + int ret; >> + >> + if (*error < 0) >> + return; >> + >> + ret = i2c_master_send(ov5693->client, data, sizeof(data)); >> + if (ret < 0) { >> + dev_dbg(ov5693->dev, "i2c send error at address 0x%04x: %d\n", >> + addr, ret); >> + *error = ret; >> + } >> +} >> + >> +static int ov5693_write_reg_array(struct ov5693_device *ov5693, >> + const struct ov5693_reg_list *reglist) >> +{ >> + unsigned int i; >> + int ret = 0; >> + >> + for (i = 0; i < reglist->num_regs; i++) >> + ov5693_write_reg(ov5693, reglist->regs[i].reg, >> + reglist->regs[i].val, &ret); >> + >> + return ret; >> +} >> + >> +static int ov5693_update_bits(struct ov5693_device *ov5693, u16 address, >> + u16 mask, u16 bits) >> +{ >> + u8 value = 0; >> + int ret; >> + >> + ret = ov5693_read_reg(ov5693, address, &value); >> + if (ret) >> + return ret; >> + >> + value &= ~mask; >> + value |= bits; >> + >> + ov5693_write_reg(ov5693, address, value, &ret); >> + if (ret) >> + return ret; >> + >> + return 0; >> +} >> + >> +/* V4L2 Controls Functions */ >> + >> +static int ov5693_flip_vert_configure(struct ov5693_device *ov5693, bool enable) >> +{ >> + u8 bits = OV5693_FORMAT1_FLIP_VERT_ISP_EN | >> + OV5693_FORMAT1_FLIP_VERT_SENSOR_EN; >> + int ret; >> + >> + ret = ov5693_update_bits(ov5693, OV5693_FORMAT1_REG, bits, >> + enable ? bits : 0); >> + if (ret) >> + return ret; >> + >> + return 0; >> +} >> + >> +static int ov5693_flip_horz_configure(struct ov5693_device *ov5693, bool enable) >> +{ >> + u8 bits = OV5693_FORMAT2_FLIP_HORZ_ISP_EN | >> + OV5693_FORMAT2_FLIP_HORZ_SENSOR_EN; >> + int ret; >> + >> + ret = ov5693_update_bits(ov5693, OV5693_FORMAT2_REG, bits, >> + enable ? bits : 0); >> + if (ret) >> + return ret; >> + >> + return 0; >> +} >> + >> +static int ov5693_get_exposure(struct ov5693_device *ov5693, s32 *value) >> +{ >> + u8 exposure_hh = 0, exposure_h = 0, exposure_l = 0; >> + int ret; >> + >> + ret = ov5693_read_reg(ov5693, OV5693_EXPOSURE_L_CTRL_HH_REG, &exposure_hh); >> + if (ret) >> + return ret; >> + >> + ret = ov5693_read_reg(ov5693, OV5693_EXPOSURE_L_CTRL_H_REG, &exposure_h); >> + if (ret) >> + return ret; >> + >> + ret = ov5693_read_reg(ov5693, OV5693_EXPOSURE_L_CTRL_L_REG, &exposure_l); >> + if (ret) >> + return ret; >> + >> + /* The lowest 4 bits are unsupported fractional bits */ >> + *value = ((exposure_hh << 16) | (exposure_h << 8) | exposure_l) >> 4; >> + >> + return 0; >> +} >> + >> +static int ov5693_exposure_configure(struct ov5693_device *ov5693, u32 exposure) >> +{ >> + int ret = 0; >> + >> + /* Enable HDR Mode to access "short" exposure */ >> + >> + ret = ov5693_update_bits(ov5693, OV5693_FORMAT2_REG, >> + OV5693_FORMAT2_HDR_EN, OV5693_FORMAT2_HDR_EN); >> + if (ret) >> + return ret; >> + >> + ov5693_write_reg(ov5693, OV5693_EXPOSURE_L_CTRL_HH_REG, >> + OV5693_EXPOSURE_CTRL_HH(exposure), &ret); >> + ov5693_write_reg(ov5693, OV5693_EXPOSURE_L_CTRL_H_REG, >> + OV5693_EXPOSURE_CTRL_H(exposure), &ret); >> + ov5693_write_reg(ov5693, OV5693_EXPOSURE_L_CTRL_L_REG, >> + OV5693_EXPOSURE_CTRL_L(exposure), &ret); >> + ov5693_write_reg(ov5693, OV5693_EXPOSURE_S_CTRL_HH_REG, >> + OV5693_EXPOSURE_CTRL_HH(exposure), &ret); >> + ov5693_write_reg(ov5693, OV5693_EXPOSURE_S_CTRL_H_REG, >> + OV5693_EXPOSURE_CTRL_H(exposure), &ret); >> + ov5693_write_reg(ov5693, OV5693_EXPOSURE_S_CTRL_L_REG, >> + OV5693_EXPOSURE_CTRL_L(exposure), &ret); >> + >> + return ret; >> +} >> + >> +static int ov5693_get_gain(struct ov5693_device *ov5693, u32 *gain) >> +{ >> + u8 gain_l = 0, gain_h = 0; >> + int ret; >> + >> + ret = ov5693_read_reg(ov5693, OV5693_GAIN_CTRL_H_REG, &gain_h); >> + if (ret) >> + return ret; >> + >> + ret = ov5693_read_reg(ov5693, OV5693_GAIN_CTRL_L_REG, &gain_l); >> + if (ret) >> + return ret; >> + >> + /* As with exposure, the lowest 4 bits are fractional bits. */ >> + *gain = ((gain_h << 8) | gain_l) >> 4; >> + >> + return ret; >> +} >> + >> +static int ov5693_digital_gain_configure(struct ov5693_device *ov5693, u32 gain) >> +{ >> + int ret = 0; >> + >> + ov5693_write_reg(ov5693, OV5693_MWB_RED_GAIN_H_REG, >> + OV5693_MWB_GAIN_H_CTRL(gain), &ret); >> + ov5693_write_reg(ov5693, OV5693_MWB_RED_GAIN_L_REG, >> + OV5693_MWB_GAIN_L_CTRL(gain), &ret); >> + ov5693_write_reg(ov5693, OV5693_MWB_GREEN_GAIN_H_REG, >> + OV5693_MWB_GAIN_H_CTRL(gain), &ret); >> + ov5693_write_reg(ov5693, OV5693_MWB_GREEN_GAIN_L_REG, >> + OV5693_MWB_GAIN_L_CTRL(gain), &ret); >> + ov5693_write_reg(ov5693, OV5693_MWB_BLUE_GAIN_H_REG, >> + OV5693_MWB_GAIN_H_CTRL(gain), &ret); >> + ov5693_write_reg(ov5693, OV5693_MWB_BLUE_GAIN_L_REG, >> + OV5693_MWB_GAIN_L_CTRL(gain), &ret); >> + >> + return ret; >> +} >> + >> +static int ov5693_analog_gain_configure(struct ov5693_device *ov5693, u32 gain) >> +{ >> + int ret = 0; >> + >> + ov5693_write_reg(ov5693, OV5693_GAIN_CTRL_L_REG, >> + OV5693_GAIN_CTRL_L(gain), &ret); >> + ov5693_write_reg(ov5693, OV5693_GAIN_CTRL_H_REG, >> + OV5693_GAIN_CTRL_H(gain), &ret); >> + >> + return ret; >> +} >> + >> +static int ov5693_vts_configure(struct ov5693_device *ov5693, u32 vblank) >> +{ >> + u16 vts = ov5693->mode->output_size_y + vblank; >> + int ret = 0; >> + >> + ov5693_write_reg(ov5693, OV5693_TIMING_VTS_H_REG, >> + OV5693_TIMING_VTS_H(vts), &ret); >> + ov5693_write_reg(ov5693, OV5693_TIMING_VTS_L_REG, >> + OV5693_TIMING_VTS_L(vts), &ret); >> + >> + return ret; >> +} >> + >> +static int ov5693_test_pattern_configure(struct ov5693_device *ov5693, u32 idx) >> +{ >> + int ret = 0; >> + >> + ov5693_write_reg(ov5693, OV5693_TEST_PATTERN_REG, >> + ov5693_test_pattern_bits[idx], &ret); >> + >> + return ret; >> +} >> + >> +static int ov5693_s_ctrl(struct v4l2_ctrl *ctrl) >> +{ >> + struct ov5693_device *ov5693 = >> + container_of(ctrl->handler, struct ov5693_device, ctrls.handler); >> + int ret = 0; >> + >> + /* If VBLANK is altered we need to update exposure to compensate */ >> + if (ctrl->id == V4L2_CID_VBLANK) { >> + int exposure_max; >> + >> + exposure_max = ov5693->mode->output_size_y + ctrl->val - >> + OV5693_INTEGRATION_TIME_MARGIN; >> + __v4l2_ctrl_modify_range(ov5693->ctrls.exposure, >> + ov5693->ctrls.exposure->minimum, >> + exposure_max, ov5693->ctrls.exposure->step, >> + ov5693->ctrls.exposure->val < exposure_max ? >> + ov5693->ctrls.exposure->val : exposure_max); >> + } >> + >> + /* Only apply changes to the controls if the device is powered up */ >> + if (!pm_runtime_get_if_in_use(ov5693->dev)) >> + return 0; >> + >> + switch (ctrl->id) { >> + case V4L2_CID_EXPOSURE: >> + ret = ov5693_exposure_configure(ov5693, ctrl->val); >> + break; >> + case V4L2_CID_ANALOGUE_GAIN: >> + ret = ov5693_analog_gain_configure(ov5693, ctrl->val); >> + break; >> + case V4L2_CID_DIGITAL_GAIN: >> + ret = ov5693_digital_gain_configure(ov5693, ctrl->val); >> + break; >> + case V4L2_CID_HFLIP: >> + ret = ov5693_flip_horz_configure(ov5693, !!ctrl->val); >> + break; >> + case V4L2_CID_VFLIP: >> + ret = ov5693_flip_vert_configure(ov5693, !!ctrl->val); >> + break; >> + case V4L2_CID_VBLANK: >> + ret = ov5693_vts_configure(ov5693, ctrl->val); >> + break; >> + case V4L2_CID_TEST_PATTERN: >> + ret = ov5693_test_pattern_configure(ov5693, ctrl->val); >> + break; >> + default: >> + ret = -EINVAL; >> + } >> + >> + pm_runtime_put(ov5693->dev); >> + >> + return ret; >> +} >> + >> +static int ov5693_g_volatile_ctrl(struct v4l2_ctrl *ctrl) >> +{ >> + struct ov5693_device *ov5693 = >> + container_of(ctrl->handler, struct ov5693_device, ctrls.handler); >> + >> + switch (ctrl->id) { >> + case V4L2_CID_EXPOSURE_ABSOLUTE: >> + return ov5693_get_exposure(ov5693, &ctrl->val); >> + case V4L2_CID_AUTOGAIN: >> + return ov5693_get_gain(ov5693, &ctrl->val); >> + default: >> + return -EINVAL; >> + } >> +} >> + >> +static const struct v4l2_ctrl_ops ov5693_ctrl_ops = { >> + .s_ctrl = ov5693_s_ctrl, >> + .g_volatile_ctrl = ov5693_g_volatile_ctrl >> +}; >> + >> +/* System Control Functions */ >> + >> +static int ov5693_mode_configure(struct ov5693_device *ov5693) >> +{ >> + const struct ov5693_resolution *mode = ov5693->mode; >> + int ret = 0; >> + >> + /* Crop Start X */ >> + ov5693_write_reg(ov5693, OV5693_CROP_START_X_H_REG, >> + OV5693_CROP_START_X_H(mode->crop_start_x), &ret); >> + ov5693_write_reg(ov5693, OV5693_CROP_START_X_L_REG, >> + OV5693_CROP_START_X_L(mode->crop_start_x), &ret); >> + >> + /* Offset X */ >> + ov5693_write_reg(ov5693, OV5693_OFFSET_START_X_H_REG, >> + OV5693_OFFSET_START_X_H(mode->offset_x), &ret); >> + ov5693_write_reg(ov5693, OV5693_OFFSET_START_X_L_REG, >> + OV5693_OFFSET_START_X_L(mode->offset_x), &ret); >> + >> + /* Output Size X */ >> + ov5693_write_reg(ov5693, OV5693_OUTPUT_SIZE_X_H_REG, >> + OV5693_OUTPUT_SIZE_X_H(mode->output_size_x), &ret); >> + ov5693_write_reg(ov5693, OV5693_OUTPUT_SIZE_X_L_REG, >> + OV5693_OUTPUT_SIZE_X_L(mode->output_size_x), &ret); >> + >> + /* Crop End X */ >> + ov5693_write_reg(ov5693, OV5693_CROP_END_X_H_REG, >> + OV5693_CROP_END_X_H(mode->crop_end_x), &ret); >> + ov5693_write_reg(ov5693, OV5693_CROP_END_X_L_REG, >> + OV5693_CROP_END_X_L(mode->crop_end_x), &ret); >> + >> + /* Horizontal Total Size */ >> + ov5693_write_reg(ov5693, OV5693_TIMING_HTS_H_REG, >> + OV5693_TIMING_HTS_H(mode->hts), &ret); >> + ov5693_write_reg(ov5693, OV5693_TIMING_HTS_L_REG, >> + OV5693_TIMING_HTS_L(mode->hts), &ret); >> + >> + /* Crop Start Y */ >> + ov5693_write_reg(ov5693, OV5693_CROP_START_Y_H_REG, >> + OV5693_CROP_START_Y_H(mode->crop_start_y), &ret); >> + ov5693_write_reg(ov5693, OV5693_CROP_START_Y_L_REG, >> + OV5693_CROP_START_Y_L(mode->crop_start_y), &ret); >> + >> + /* Offset Y */ >> + ov5693_write_reg(ov5693, OV5693_OFFSET_START_Y_H_REG, >> + OV5693_OFFSET_START_Y_H(mode->offset_y), &ret); >> + ov5693_write_reg(ov5693, OV5693_OFFSET_START_Y_L_REG, >> + OV5693_OFFSET_START_Y_L(mode->offset_y), &ret); >> + >> + /* Output Size Y */ >> + ov5693_write_reg(ov5693, OV5693_OUTPUT_SIZE_Y_H_REG, >> + OV5693_OUTPUT_SIZE_Y_H(mode->output_size_y), &ret); >> + ov5693_write_reg(ov5693, OV5693_OUTPUT_SIZE_Y_L_REG, >> + OV5693_OUTPUT_SIZE_Y_L(mode->output_size_y), &ret); >> + >> + /* Crop End Y */ >> + ov5693_write_reg(ov5693, OV5693_CROP_END_Y_H_REG, >> + OV5693_CROP_END_Y_H(mode->crop_end_y), &ret); >> + ov5693_write_reg(ov5693, OV5693_CROP_END_Y_L_REG, >> + OV5693_CROP_END_Y_L(mode->crop_end_y), &ret); >> + >> + /* Vertical Total Size */ >> + ov5693_write_reg(ov5693, OV5693_TIMING_VTS_H_REG, >> + OV5693_TIMING_VTS_H(mode->vts), &ret); >> + ov5693_write_reg(ov5693, OV5693_TIMING_VTS_L_REG, >> + OV5693_TIMING_VTS_L(mode->vts), &ret); >> + >> + /* Subsample X increase */ >> + ov5693_write_reg(ov5693, OV5693_SUB_INC_X_REG, >> + ((mode->inc_x_odd << 4) & 0xf0) | >> + (mode->inc_x_even & 0x0f), &ret); >> + /* Subsample Y increase */ >> + ov5693_write_reg(ov5693, OV5693_SUB_INC_Y_REG, >> + ((mode->inc_y_odd << 4) & 0xf0) | >> + (mode->inc_y_even & 0x0f), &ret); >> + >> + if (ret) >> + return ret; >> + >> + /* Binning */ >> + ret = ov5693_update_bits(ov5693, OV5693_FORMAT1_REG, >> + OV5693_FORMAT1_VBIN_EN, >> + mode->binning_y ? OV5693_FORMAT1_VBIN_EN : 0); >> + if (ret) >> + return ret; >> + >> + ret = ov5693_update_bits(ov5693, OV5693_FORMAT2_REG, >> + OV5693_FORMAT2_HBIN_EN, >> + mode->binning_x ? OV5693_FORMAT2_HBIN_EN : 0); >> + if (ret) >> + return ret; >> + >> + /* Scaler */ >> + ret = ov5693_update_bits(ov5693, OV5693_ISP_CTRL2_REG, >> + OV5693_ISP_SCALE_ENABLE, >> + mode->scale_enable ? OV5693_ISP_SCALE_ENABLE : 0); >> + if (ret) >> + return ret; >> + >> + return ret; >> +} >> + >> +static int ov5693_sw_standby(struct ov5693_device *ov5693, bool standby) >> +{ >> + int ret = 0; >> + >> + ov5693_write_reg(ov5693, OV5693_SW_STREAM_REG, >> + standby ? OV5693_STOP_STREAMING : OV5693_START_STREAMING, >> + &ret); >> + >> + return ret; >> +} >> + >> +static int ov5693_sw_reset(struct ov5693_device *ov5693) >> +{ >> + int ret = 0; >> + >> + ov5693_write_reg(ov5693, OV5693_SW_RESET_REG, OV5693_SW_RESET, &ret); >> + >> + return ret; >> +} >> + >> +static int ov5693_sensor_init(struct ov5693_device *ov5693) >> +{ >> + int ret = 0; >> + >> + ret = ov5693_sw_reset(ov5693); >> + if (ret) { >> + dev_err(ov5693->dev, "%s software reset error\n", __func__); >> + return ret; >> + } >> + >> + ret = ov5693_write_reg_array(ov5693, &ov5693_global_setting); >> + if (ret) { >> + dev_err(ov5693->dev, "%s global settings error\n", __func__); >> + return ret; >> + } >> + >> + ret = ov5693_mode_configure(ov5693); >> + if (ret) { >> + dev_err(ov5693->dev, "%s mode configure error\n", __func__); >> + return ret; >> + } >> + >> + ret = ov5693_sw_standby(ov5693, true); >> + if (ret) >> + dev_err(ov5693->dev, "%s software standby error\n", __func__); >> + >> + return ret; >> +} >> + >> +static void ov5693_sensor_powerdown(struct ov5693_device *ov5693) >> +{ >> + gpiod_set_value_cansleep(ov5693->reset, 1); >> + gpiod_set_value_cansleep(ov5693->powerdown, 1); >> + >> + regulator_bulk_disable(OV5693_NUM_SUPPLIES, ov5693->supplies); >> + >> + clk_disable_unprepare(ov5693->clk); >> +} >> + >> +static int ov5693_sensor_powerup(struct ov5693_device *ov5693) >> +{ >> + int ret = 0; >> + >> + gpiod_set_value_cansleep(ov5693->reset, 1); >> + gpiod_set_value_cansleep(ov5693->powerdown, 1); >> + >> + ret = clk_prepare_enable(ov5693->clk); >> + if (ret) { >> + dev_err(ov5693->dev, "Failed to enable clk\n"); >> + goto fail_power; >> + } >> + >> + ret = regulator_bulk_enable(OV5693_NUM_SUPPLIES, ov5693->supplies); >> + if (ret) { >> + dev_err(ov5693->dev, "Failed to enable regulators\n"); >> + goto fail_power; >> + } >> + >> + gpiod_set_value_cansleep(ov5693->reset, 0); >> + gpiod_set_value_cansleep(ov5693->powerdown, 0); >> + >> + usleep_range(20000, 25000); >> + >> + return 0; >> + >> +fail_power: >> + ov5693_sensor_powerdown(ov5693); >> + return ret; >> +} >> + >> +static int __maybe_unused ov5693_sensor_suspend(struct device *dev) >> +{ >> + struct v4l2_subdev *sd = dev_get_drvdata(dev); >> + struct ov5693_device *ov5693 = to_ov5693_sensor(sd); >> + int ret; >> + >> + mutex_lock(&ov5693->lock); >> + >> + if (ov5693->streaming) { >> + ret = ov5693_sw_standby(ov5693, true); >> + if (ret) >> + goto out_unlock; >> + } >> + >> + ov5693_sensor_powerdown(ov5693); >> + >> +out_unlock: >> + mutex_unlock(&ov5693->lock); >> + return ret; >> +} >> + >> +static int __maybe_unused ov5693_sensor_resume(struct device *dev) >> +{ >> + struct v4l2_subdev *sd = dev_get_drvdata(dev); >> + struct ov5693_device *ov5693 = to_ov5693_sensor(sd); >> + int ret; >> + >> + mutex_lock(&ov5693->lock); >> + >> + ret = ov5693_sensor_powerup(ov5693); >> + if (ret) >> + goto out_unlock; >> + >> + ret = ov5693_sensor_init(ov5693); >> + if (ret) { >> + dev_err(dev, "ov5693 sensor init failure\n"); >> + goto err_power; >> + } >> + >> + if (ov5693->streaming) { >> + ret = ov5693_sw_standby(ov5693, false); >> + if (ret) >> + goto err_power; >> + } >> + >> + goto out_unlock; >> + >> +err_power: >> + ov5693_sensor_powerdown(ov5693); >> +out_unlock: >> + mutex_unlock(&ov5693->lock); >> + return ret; >> +} >> + >> +static int ov5693_detect(struct ov5693_device *ov5693) >> +{ >> + u8 id_l = 0, id_h = 0; >> + u16 id = 0; >> + int ret; >> + >> + ret = ov5693_read_reg(ov5693, OV5693_REG_CHIP_ID_H, &id_h); >> + if (ret) >> + return ret; >> + >> + ret = ov5693_read_reg(ov5693, OV5693_REG_CHIP_ID_L, &id_l); >> + if (ret) >> + return ret; >> + >> + id = (id_h << 8) | id_l; >> + >> + if (id != OV5693_CHIP_ID) { >> + dev_err(ov5693->dev, "sensor ID mismatch. Found 0x%04x\n", id); >> + return -ENODEV; >> + } >> + >> + return 0; >> +} >> + >> +/* V4L2 Framework callbacks */ >> + >> +static int ov5693_set_fmt(struct v4l2_subdev *sd, >> + struct v4l2_subdev_pad_config *cfg, >> + struct v4l2_subdev_format *format) >> +{ >> + struct ov5693_device *ov5693 = to_ov5693_sensor(sd); >> + const struct ov5693_resolution *mode; >> + int exposure_max; >> + int ret = 0; >> + int hblank; >> + >> + if (format->pad) >> + return -EINVAL; >> + >> + mutex_lock(&ov5693->lock); >> + >> + mode = v4l2_find_nearest_size(ov5693_resolutions, >> + OV5693_NUM_RESOLUTIONS, output_size_x, >> + output_size_y, format->format.width, >> + format->format.height); >> + >> + if (!mode) >> + return -EINVAL; >> + >> + format->format.width = mode->output_size_x; >> + format->format.height = mode->output_size_y; >> + format->format.code = MEDIA_BUS_FMT_SBGGR10_1X10; >> + >> + if (format->which == V4L2_SUBDEV_FORMAT_TRY) { >> + *v4l2_subdev_get_try_format(sd, cfg, format->pad) = format->format; >> + goto mutex_unlock; >> + } >> + >> + ov5693->mode = mode; >> + >> + /* Update limits and set FPS to default */ >> + __v4l2_ctrl_modify_range(ov5693->ctrls.vblank, >> + OV5693_TIMING_MIN_VTS, >> + OV5693_TIMING_MAX_VTS - mode->output_size_y, >> + 1, mode->vts - mode->output_size_y); >> + __v4l2_ctrl_s_ctrl(ov5693->ctrls.vblank, >> + mode->vts - mode->output_size_y); >> + >> + hblank = mode->hts - mode->output_size_x; >> + __v4l2_ctrl_modify_range(ov5693->ctrls.hblank, hblank, hblank, 1, >> + hblank); >> + >> + exposure_max = mode->vts - OV5693_INTEGRATION_TIME_MARGIN; >> + __v4l2_ctrl_modify_range(ov5693->ctrls.exposure, >> + ov5693->ctrls.exposure->minimum, exposure_max, >> + ov5693->ctrls.exposure->step, >> + ov5693->ctrls.exposure->val < exposure_max ? >> + ov5693->ctrls.exposure->val : exposure_max); >> + >> +mutex_unlock: >> + mutex_unlock(&ov5693->lock); >> + return ret; >> +} >> + >> +static const struct v4l2_rect * >> +__ov5693_get_pad_crop(struct ov5693_device *ov5693, struct v4l2_subdev_pad_config *cfg, >> + unsigned int pad, enum v4l2_subdev_format_whence which) >> +{ >> + switch (which) { >> + case V4L2_SUBDEV_FORMAT_TRY: >> + return v4l2_subdev_get_try_crop(&ov5693->sd, cfg, pad); >> + case V4L2_SUBDEV_FORMAT_ACTIVE: >> + return &ov5693->mode->crop; >> + } >> + >> + return NULL; >> +} >> + >> +static int ov5693_get_selection(struct v4l2_subdev *sd, >> + struct v4l2_subdev_pad_config *cfg, >> + struct v4l2_subdev_selection *sel) >> +{ >> + struct ov5693_device *ov5693 = to_ov5693_sensor(sd); >> + >> + switch (sel->target) { >> + case V4L2_SEL_TGT_CROP: >> + mutex_lock(&ov5693->lock); >> + sel->r = *__ov5693_get_pad_crop(ov5693, cfg, sel->pad, sel->which); >> + mutex_unlock(&ov5693->lock); >> + break; >> + case V4L2_SEL_TGT_NATIVE_SIZE: >> + sel->r.top = 0; >> + sel->r.left = 0; >> + sel->r.width = OV5693_NATIVE_WIDTH; >> + sel->r.height = OV5693_NATIVE_HEIGHT; >> + break; >> + case V4L2_SEL_TGT_CROP_BOUNDS: >> + case V4L2_SEL_TGT_CROP_DEFAULT: >> + sel->r.top = OV5693_ACTIVE_START_TOP; >> + sel->r.left = OV5693_ACTIVE_START_LEFT; >> + sel->r.width = OV5693_ACTIVE_WIDTH; >> + sel->r.height = OV5693_ACTIVE_HEIGHT; >> + break; >> + default: >> + return -EINVAL; >> + } >> + >> + return 0; >> +} >> + >> +static int ov5693_get_fmt(struct v4l2_subdev *sd, >> + struct v4l2_subdev_pad_config *cfg, >> + struct v4l2_subdev_format *format) >> +{ >> + struct v4l2_mbus_framefmt *fmt = &format->format; >> + struct ov5693_device *ov5693 = to_ov5693_sensor(sd); >> + >> + if (format->pad) >> + return -EINVAL; >> + >> + if (!fmt) >> + return -EINVAL; >> + >> + fmt->width = ov5693->mode->output_size_x; >> + fmt->height = ov5693->mode->output_size_y; >> + fmt->code = MEDIA_BUS_FMT_SBGGR10_1X10; >> + >> + return 0; >> +} >> + >> +static int ov5693_s_stream(struct v4l2_subdev *sd, int enable) >> +{ >> + struct ov5693_device *ov5693 = to_ov5693_sensor(sd); >> + int ret; >> + >> + if (enable) { >> + ret = pm_runtime_get_sync(ov5693->dev); >> + if (ret < 0) >> + goto err_power_down; >> + } >> + >> + ret = __v4l2_ctrl_handler_setup(&ov5693->ctrls.handler); >> + if (ret) >> + goto err_power_down; >> + >> + mutex_lock(&ov5693->lock); >> + ret = ov5693_sw_standby(ov5693, !enable); >> + mutex_unlock(&ov5693->lock); >> + >> + if (ret) >> + goto err_power_down; >> + ov5693->streaming = !!enable; >> + >> + if (!enable) >> + pm_runtime_put(ov5693->dev); >> + >> + return 0; >> +err_power_down: >> + pm_runtime_put_noidle(ov5693->dev); >> + return ret; >> +} >> + >> +static int ov5693_g_frame_interval(struct v4l2_subdev *sd, >> + struct v4l2_subdev_frame_interval *interval) >> +{ >> + struct ov5693_device *ov5693 = to_ov5693_sensor(sd); >> + >> + interval->interval.numerator = 1; >> + interval->interval.denominator = ov5693->mode->fps; >> + >> + return 0; >> +} >> + >> +static int ov5693_enum_mbus_code(struct v4l2_subdev *sd, >> + struct v4l2_subdev_pad_config *cfg, >> + struct v4l2_subdev_mbus_code_enum *code) >> +{ >> + if (code->index >= OV5693_NUM_MBUS_FMTS) >> + return -EINVAL; >> + >> + code->code = MEDIA_BUS_FMT_SBGGR10_1X10; >> + return 0; >> +} >> + >> +static int ov5693_enum_frame_size(struct v4l2_subdev *sd, >> + struct v4l2_subdev_pad_config *cfg, >> + struct v4l2_subdev_frame_size_enum *fse) >> +{ >> + int index = fse->index; >> + >> + if (index >= OV5693_NUM_RESOLUTIONS) >> + return -EINVAL; >> + >> + fse->min_width = ov5693_resolutions[index].output_size_x; >> + fse->min_height = ov5693_resolutions[index].output_size_y; >> + fse->max_width = ov5693_resolutions[index].output_size_x; >> + fse->max_height = ov5693_resolutions[index].output_size_y; >> + >> + return 0; >> +} >> + >> +static const struct v4l2_subdev_video_ops ov5693_video_ops = { >> + .s_stream = ov5693_s_stream, >> + .g_frame_interval = ov5693_g_frame_interval, >> +}; >> + >> +static const struct v4l2_subdev_pad_ops ov5693_pad_ops = { >> + .enum_mbus_code = ov5693_enum_mbus_code, >> + .enum_frame_size = ov5693_enum_frame_size, >> + .get_fmt = ov5693_get_fmt, >> + .set_fmt = ov5693_set_fmt, >> + .get_selection = ov5693_get_selection, >> +}; >> + >> +static const struct v4l2_subdev_ops ov5693_ops = { >> + .video = &ov5693_video_ops, >> + .pad = &ov5693_pad_ops, >> +}; >> + >> +/* Sensor and Driver Configuration Functions */ >> + >> +static int ov5693_init_controls(struct ov5693_device *ov5693) >> +{ >> + const struct v4l2_ctrl_ops *ops = &ov5693_ctrl_ops; >> + struct v4l2_fwnode_device_properties props; >> + int vblank_max, vblank_def; >> + int exposure_max; >> + int hblank; >> + int ret; >> + >> + ret = v4l2_ctrl_handler_init(&ov5693->ctrls.handler, 14); >> + if (ret) >> + return ret; >> + >> + /* link freq */ >> + ov5693->ctrls.link_freq = v4l2_ctrl_new_int_menu(&ov5693->ctrls.handler, >> + NULL, V4L2_CID_LINK_FREQ, >> + 0, 0, link_freq_menu_items); >> + if (ov5693->ctrls.link_freq) >> + ov5693->ctrls.link_freq->flags |= V4L2_CTRL_FLAG_READ_ONLY; >> + >> + /* pixel rate */ >> + ov5693->ctrls.pixel_rate = v4l2_ctrl_new_std(&ov5693->ctrls.handler, NULL, >> + V4L2_CID_PIXEL_RATE, 0, >> + OV5693_PIXEL_RATE, 1, >> + OV5693_PIXEL_RATE); >> + >> + /* Exposure */ >> + exposure_max = ov5693->mode->vts - OV5693_INTEGRATION_TIME_MARGIN; >> + ov5693->ctrls.exposure = v4l2_ctrl_new_std(&ov5693->ctrls.handler, ops, >> + V4L2_CID_EXPOSURE, >> + OV5693_EXPOSURE_MIN, >> + exposure_max, >> + OV5693_EXPOSURE_STEP, >> + exposure_max); >> + >> + /* Gain */ >> + ov5693->ctrls.analogue_gain = v4l2_ctrl_new_std(&ov5693->ctrls.handler, >> + ops, V4L2_CID_ANALOGUE_GAIN, >> + OV5693_GAIN_MIN, >> + OV5693_GAIN_MAX, >> + OV5693_GAIN_STEP, >> + OV5693_GAIN_DEF); >> + ov5693->ctrls.digital_gain = v4l2_ctrl_new_std(&ov5693->ctrls.handler, ops, >> + V4L2_CID_DIGITAL_GAIN, >> + OV5693_DIGITAL_GAIN_MIN, >> + OV5693_DIGITAL_GAIN_MAX, >> + OV5693_DIGITAL_GAIN_STEP, >> + OV5693_DIGITAL_GAIN_DEF); >> + >> + /* Flip */ >> + ov5693->ctrls.hflip = v4l2_ctrl_new_std(&ov5693->ctrls.handler, ops, >> + V4L2_CID_HFLIP, 0, 1, 1, 0); >> + ov5693->ctrls.vflip = v4l2_ctrl_new_std(&ov5693->ctrls.handler, ops, >> + V4L2_CID_VFLIP, 0, 1, 1, 0); >> + >> + hblank = ov5693->mode->hts - ov5693->mode->output_size_x; >> + ov5693->ctrls.hblank = v4l2_ctrl_new_std(&ov5693->ctrls.handler, ops, >> + V4L2_CID_HBLANK, hblank, hblank, >> + 1, hblank); >> + if (ov5693->ctrls.hblank) >> + ov5693->ctrls.hblank->flags |= V4L2_CTRL_FLAG_READ_ONLY; >> + >> + vblank_max = OV5693_TIMING_MAX_VTS - ov5693->mode->output_size_y; >> + vblank_def = ov5693->mode->vts - ov5693->mode->output_size_y; >> + ov5693->ctrls.vblank = v4l2_ctrl_new_std(&ov5693->ctrls.handler, ops, >> + V4L2_CID_VBLANK, >> + OV5693_TIMING_MIN_VTS, >> + vblank_max, 1, vblank_def); >> + >> + ov5693->ctrls.test_pattern = v4l2_ctrl_new_std_menu_items( >> + &ov5693->ctrls.handler, ops, V4L2_CID_TEST_PATTERN, >> + ARRAY_SIZE(ov5693_test_pattern_menu) - 1, >> + 0, 0, ov5693_test_pattern_menu); >> + >> + if (ov5693->ctrls.handler.error) { >> + dev_err(ov5693->dev, "Error initialising v4l2 ctrls\n"); >> + ret = ov5693->ctrls.handler.error; >> + goto err_free_handler; >> + } >> + >> + /* set properties from fwnode (e.g. rotation, orientation) */ >> + ret = v4l2_fwnode_device_parse(ov5693->dev, &props); >> + if (ret) >> + goto err_free_handler; >> + >> + ret = v4l2_ctrl_new_fwnode_properties(&ov5693->ctrls.handler, ops, >> + &props); >> + if (ret) >> + goto err_free_handler; >> + >> + /* Use same lock for controls as for everything else. */ >> + ov5693->ctrls.handler.lock = &ov5693->lock; >> + ov5693->sd.ctrl_handler = &ov5693->ctrls.handler; >> + >> + return 0; >> + >> +err_free_handler: >> + v4l2_ctrl_handler_free(&ov5693->ctrls.handler); >> + return ret; >> +} >> + >> +static int ov5693_configure_gpios(struct ov5693_device *ov5693) >> +{ >> + ov5693->reset = devm_gpiod_get_optional(ov5693->dev, "reset", >> + GPIOD_OUT_HIGH); >> + if (IS_ERR(ov5693->reset)) { >> + dev_err(ov5693->dev, "Error fetching reset GPIO\n"); >> + return PTR_ERR(ov5693->reset); >> + } >> + >> + ov5693->powerdown = devm_gpiod_get_optional(ov5693->dev, "powerdown", >> + GPIOD_OUT_HIGH); >> + if (IS_ERR(ov5693->powerdown)) { >> + dev_err(ov5693->dev, "Error fetching powerdown GPIO\n"); >> + return PTR_ERR(ov5693->powerdown); >> + } >> + >> + return 0; >> +} >> + >> +static int ov5693_get_regulators(struct ov5693_device *ov5693) >> +{ >> + unsigned int i; >> + >> + for (i = 0; i < OV5693_NUM_SUPPLIES; i++) >> + ov5693->supplies[i].supply = ov5693_supply_names[i]; >> + >> + return devm_regulator_bulk_get(ov5693->dev, OV5693_NUM_SUPPLIES, >> + ov5693->supplies); >> +} >> + >> +static int ov5693_probe(struct i2c_client *client) >> +{ >> + struct fwnode_handle *fwnode = dev_fwnode(&client->dev); >> + struct fwnode_handle *endpoint; >> + struct ov5693_device *ov5693; >> + u32 clk_rate; >> + int ret = 0; >> + >> + endpoint = fwnode_graph_get_next_endpoint(fwnode, NULL); >> + if (!endpoint && !IS_ERR_OR_NULL(fwnode->secondary)) >> + endpoint = fwnode_graph_get_next_endpoint(fwnode->secondary, NULL); >> + if (!endpoint) >> + return -EPROBE_DEFER; >> + >> + ov5693 = devm_kzalloc(&client->dev, sizeof(*ov5693), GFP_KERNEL); >> + if (!ov5693) >> + return -ENOMEM; >> + >> + ov5693->client = client; >> + ov5693->dev = &client->dev; >> + >> + mutex_init(&ov5693->lock); >> + >> + v4l2_i2c_subdev_init(&ov5693->sd, client, &ov5693_ops); >> + >> + ov5693->clk = devm_clk_get(&client->dev, "xvclk"); >> + if (IS_ERR(ov5693->clk)) { >> + dev_err(&client->dev, "Error getting clock\n"); >> + return PTR_ERR(ov5693->clk); >> + } >> + >> + clk_rate = clk_get_rate(ov5693->clk); >> + if (clk_rate != OV5693_XVCLK_FREQ) { >> + dev_err(&client->dev, "Unsupported clk freq %u, expected %u\n", >> + clk_rate, OV5693_XVCLK_FREQ); >> + return -EINVAL; >> + } >> + >> + ret = ov5693_configure_gpios(ov5693); >> + if (ret) >> + return ret; >> + >> + ret = ov5693_get_regulators(ov5693); >> + if (ret) { >> + dev_err(&client->dev, "Error fetching regulators\n"); >> + return ret; >> + } >> + >> + ov5693->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; >> + ov5693->pad.flags = MEDIA_PAD_FL_SOURCE; >> + ov5693->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR; >> + ov5693->mode = &ov5693_resolutions[OV5693_NUM_RESOLUTIONS - 1]; >> + >> + ret = ov5693_init_controls(ov5693); >> + if (ret) >> + return ret; >> + >> + ret = media_entity_pads_init(&ov5693->sd.entity, 1, &ov5693->pad); >> + if (ret) >> + goto err_ctrl_handler_free; >> + >> + /* >> + * We need the driver to work in the event that pm runtime is disable in >> + * the kernel, so power up and verify the chip now. In the event that >> + * runtime pm is disabled this will leave the chip on, so that streaming >> + * will work. >> + */ >> + >> + ret = ov5693_sensor_powerup(ov5693); >> + if (ret) >> + goto err_media_entity_cleanup; >> + >> + ret = ov5693_detect(ov5693); >> + if (ret) >> + goto err_powerdown; >> + >> + pm_runtime_set_active(&client->dev); >> + pm_runtime_get_noresume(&client->dev); >> + pm_runtime_enable(&client->dev); >> + >> + ret = v4l2_async_register_subdev_sensor_common(&ov5693->sd); >> + if (ret) { >> + dev_err(&client->dev, "failed to register V4L2 subdev: %d", >> + ret); >> + goto err_pm_runtime; >> + } >> + >> + pm_runtime_set_autosuspend_delay(&client->dev, 1000); >> + pm_runtime_use_autosuspend(&client->dev); >> + pm_runtime_put_autosuspend(&client->dev); >> + >> + return ret; >> + >> +err_pm_runtime: >> + pm_runtime_disable(&client->dev); >> + pm_runtime_put_noidle(&client->dev); >> +err_powerdown: >> + ov5693_sensor_powerdown(ov5693); >> +err_media_entity_cleanup: >> + media_entity_cleanup(&ov5693->sd.entity); >> +err_ctrl_handler_free: >> + v4l2_ctrl_handler_free(&ov5693->ctrls.handler); >> + >> + return ret; >> +} >> + >> +static int ov5693_remove(struct i2c_client *client) >> +{ >> + struct v4l2_subdev *sd = i2c_get_clientdata(client); >> + struct ov5693_device *ov5693 = to_ov5693_sensor(sd); >> + >> + v4l2_async_unregister_subdev(sd); >> + media_entity_cleanup(&ov5693->sd.entity); >> + v4l2_ctrl_handler_free(&ov5693->ctrls.handler); >> + mutex_destroy(&ov5693->lock); >> + >> + /* >> + * Disable runtime PM. In case runtime PM is disabled in the kernel, >> + * make sure to turn power off manually. >> + */ >> + pm_runtime_disable(&client->dev); >> + if (!pm_runtime_status_suspended(&client->dev)) >> + ov5693_sensor_powerdown(ov5693); >> + pm_runtime_set_suspended(&client->dev); >> + >> + return 0; >> +} >> + >> +static const struct dev_pm_ops ov5693_pm_ops = { >> + SET_RUNTIME_PM_OPS(ov5693_sensor_suspend, ov5693_sensor_resume, NULL) >> +}; >> + >> +static const struct acpi_device_id ov5693_acpi_match[] = { >> + {"INT33BE"}, >> + {}, >> +}; >> +MODULE_DEVICE_TABLE(acpi, ov5693_acpi_match); >> + >> +static struct i2c_driver ov5693_driver = { >> + .driver = { >> + .name = "ov5693", >> + .acpi_match_table = ov5693_acpi_match, >> + .pm = &ov5693_pm_ops, >> + }, >> + .probe_new = ov5693_probe, >> + .remove = ov5693_remove, >> +}; >> +module_i2c_driver(ov5693_driver); >> + >> +MODULE_DESCRIPTION("A low-level driver for OmniVision 5693 sensors"); >> +MODULE_LICENSE("GPL");