From: Philipp Zabel <p.zabel@pengutronix.de>
To: linux-media@vger.kernel.org
Cc: Steve Longerbeam <steve_longerbeam@mentor.com>,
Marek Vasut <marex@denx.de>, Hans Verkuil <hverkuil@xs4all.nl>,
Gary Bisson <gary.bisson@boundarydevices.com>,
kernel@pengutronix.de, Philipp Zabel <p.zabel@pengutronix.de>
Subject: [PATCH v2 21/21] [media] tc358743: set entity function to video interface bridge
Date: Fri, 14 Oct 2016 19:34:41 +0200 [thread overview]
Message-ID: <1476466481-24030-22-git-send-email-p.zabel@pengutronix.de> (raw)
In-Reply-To: <1476466481-24030-1-git-send-email-p.zabel@pengutronix.de>
The TC358743 is an HDMI to MIPI CSI2-2 bridge.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
---
drivers/media/i2c/tc358743.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/media/i2c/tc358743.c b/drivers/media/i2c/tc358743.c
index 7f82932..259ccf6 100644
--- a/drivers/media/i2c/tc358743.c
+++ b/drivers/media/i2c/tc358743.c
@@ -1886,6 +1886,7 @@ static int tc358743_probe(struct i2c_client *client,
}
state->pad.flags = MEDIA_PAD_FL_SOURCE;
+ sd->entity.function = MEDIA_ENT_F_VID_IF_BRIDGE;
err = media_entity_pads_init(&sd->entity, 1, &state->pad);
if (err < 0)
goto err_hdl;
--
2.9.3
next prev parent reply other threads:[~2016-10-14 17:35 UTC|newest]
Thread overview: 61+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-10-14 17:34 [PATCH v2 00/21] Basic i.MX IPUv3 capture support Philipp Zabel
2016-10-14 17:34 ` [PATCH v2 01/21] [media] v4l2-async: move code out of v4l2_async_notifier_register into v4l2_async_test_nofity_all Philipp Zabel
2016-10-14 17:34 ` [PATCH v2 02/21] [media] v4l2-async: allow subdevices to add further subdevices to the notifier waiting list Philipp Zabel
2016-10-14 17:34 ` [PATCH v2 03/21] [media] v4l: of: add v4l2_of_subdev_registered Philipp Zabel
2016-10-14 17:34 ` [PATCH v2 04/21] [media] v4l2-async: add new subdevices to the tail of subdev_list Philipp Zabel
2016-10-14 17:34 ` [PATCH v2 05/21] [media] imx: Add i.MX SoC wide media device driver Philipp Zabel
2016-10-14 17:34 ` [PATCH v2 06/21] [media] imx: Add IPUv3 media common code Philipp Zabel
2016-10-14 17:34 ` [PATCH v2 07/21] [media] imx-ipu: Add i.MX IPUv3 CSI subdevice driver Philipp Zabel
2016-11-08 7:18 ` Ying Liu
2016-10-14 17:34 ` [PATCH v2 08/21] [media] imx: Add i.MX IPUv3 capture driver Philipp Zabel
2016-10-17 11:32 ` Jack Mitchell
2016-10-17 11:35 ` Marek Vasut
2016-10-17 11:40 ` Jack Mitchell
2016-10-17 12:12 ` Philipp Zabel
2016-10-19 16:22 ` Jack Mitchell
2016-10-19 19:25 ` Marek Vasut
2016-10-26 11:29 ` Jack Mitchell
2016-11-08 7:21 ` Ying Liu
2016-10-14 17:34 ` [PATCH v2 09/21] [media] platform: add video-multiplexer subdevice driver Philipp Zabel
2016-10-14 17:34 ` [PATCH v2 10/21] [media] imx: Add i.MX MIPI CSI-2 " Philipp Zabel
2016-10-14 17:34 ` [PATCH v2 11/21] [media] tc358743: put lanes in STOP state before starting streaming Philipp Zabel
2016-10-14 17:34 ` [PATCH v2 12/21] ARM: dts: imx6qdl: Add capture-subsystem node Philipp Zabel
2016-10-14 17:34 ` [PATCH v2 13/21] ARM: dts: imx6qdl: Add mipi_ipu1/2 multiplexers, mipi_csi, and their connections Philipp Zabel
2016-11-08 8:23 ` Ying Liu
2016-10-14 17:34 ` [PATCH v2 14/21] ARM: dts: imx6qdl: Add MIPI CSI-2 D-PHY compatible and clocks Philipp Zabel
2016-10-14 17:34 ` [PATCH v2 15/21] ARM: dts: nitrogen6x: Add dtsi for BD_HDMI_MIPI HDMI to MIPI CSI-2 receiver board Philipp Zabel
2016-10-14 17:34 ` [PATCH v2 16/21] gpu: ipuv3: add ipu_csi_set_downsize Philipp Zabel
2016-10-14 17:34 ` [PATCH v2 17/21] [media] imx-ipuv3-csi: support downsizing Philipp Zabel
2016-10-14 17:34 ` [PATCH v2 18/21] [media] add mux and video interface bridge entity functions Philipp Zabel
2016-10-14 17:34 ` [PATCH v2 19/21] [media] video-multiplexer: set entity function to mux Philipp Zabel
2016-10-14 17:34 ` [PATCH v2 20/21] [media] imx: Set i.MX MIPI CSI-2 entity function to bridge Philipp Zabel
2016-10-14 17:34 ` Philipp Zabel [this message]
2016-10-17 10:18 ` [PATCH v2 00/21] Basic i.MX IPUv3 capture support Gary Bisson
2016-10-17 12:41 ` Philipp Zabel
2016-10-19 21:30 ` Sakari Ailus
[not found] ` <CAH-u=807nRYzza0kTfOMv1AiWazk6FGJyz6W5_bYw7v9nOrccA@mail.gmail.com>
2016-12-29 15:10 ` Jean-Michel Hautbois
2016-12-29 20:51 ` Robert Schwebel
2016-12-30 19:06 ` Marek Vasut
2016-12-30 20:26 ` Steve Longerbeam
2017-01-02 13:51 ` Jean-Michel Hautbois
2017-01-02 14:45 ` Hans Verkuil
2017-01-02 14:59 ` Jean-Michel Hautbois
2017-01-02 19:19 ` Fabio Estevam
2017-01-02 19:20 ` Steve Longerbeam
2017-01-02 17:04 ` Fabio Estevam
2017-01-02 19:17 ` Steve Longerbeam
2017-01-09 19:43 ` Philipp Zabel
2017-01-10 0:15 ` Steve Longerbeam
2017-01-10 23:52 ` Steve Longerbeam
2017-01-11 9:12 ` Jean-Michel Hautbois
2017-01-11 12:10 ` Philipp Zabel
2017-01-12 23:22 ` Steve Longerbeam
2017-01-12 23:43 ` Steve Longerbeam
2017-01-13 2:22 ` Steve Longerbeam
2017-01-13 11:18 ` Philipp Zabel
2017-01-13 11:04 ` Philipp Zabel
2017-01-13 11:05 ` Philipp Zabel
2017-01-14 20:26 ` Steve Longerbeam
2017-01-16 11:49 ` Philipp Zabel
2017-01-11 12:11 ` Philipp Zabel
2017-01-24 18:11 ` Philipp Zabel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1476466481-24030-22-git-send-email-p.zabel@pengutronix.de \
--to=p.zabel@pengutronix.de \
--cc=gary.bisson@boundarydevices.com \
--cc=hverkuil@xs4all.nl \
--cc=kernel@pengutronix.de \
--cc=linux-media@vger.kernel.org \
--cc=marex@denx.de \
--cc=steve_longerbeam@mentor.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).