linux-media.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Hans Verkuil <hverkuil@xs4all.nl>
To: linux-media@vger.kernel.org
Cc: Russell King <linux@armlinux.org.uk>,
	dri-devel@lists.freedesktop.org,
	Marek Szyprowski <m.szyprowski@samsung.com>,
	Javier Martinez Canillas <javier@osg.samsung.com>,
	Benjamin Gaignard <benjamin.gaignard@linaro.org>,
	linux-samsung-soc@vger.kernel.org,
	Krzysztof Kozlowski <krzk@kernel.org>,
	Inki Dae <inki.dae@samsung.com>,
	Hans Verkuil <hans.verkuil@cisco.com>
Subject: [PATCHv2 2/4] exynos_hdmi: add HPD notifier support
Date: Mon,  2 Jan 2017 15:19:05 +0100	[thread overview]
Message-ID: <1483366747-34288-3-git-send-email-hverkuil@xs4all.nl> (raw)
In-Reply-To: <1483366747-34288-1-git-send-email-hverkuil@xs4all.nl>

From: Hans Verkuil <hans.verkuil@cisco.com>

Implement the HPD notifier support to allow CEC drivers to
be informed when there is a new EDID and when a connect or
disconnect happens.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
---
 drivers/gpu/drm/exynos/Kconfig       |  1 +
 drivers/gpu/drm/exynos/exynos_hdmi.c | 24 +++++++++++++++++++++---
 2 files changed, 22 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/exynos/Kconfig b/drivers/gpu/drm/exynos/Kconfig
index d706ca4..80bfd1d 100644
--- a/drivers/gpu/drm/exynos/Kconfig
+++ b/drivers/gpu/drm/exynos/Kconfig
@@ -77,6 +77,7 @@ config DRM_EXYNOS_DP
 config DRM_EXYNOS_HDMI
 	bool "HDMI"
 	depends on DRM_EXYNOS_MIXER || DRM_EXYNOS5433_DECON
+	select HPD_NOTIFIERS
 	help
 	  Choose this option if you want to use Exynos HDMI for DRM.
 
diff --git a/drivers/gpu/drm/exynos/exynos_hdmi.c b/drivers/gpu/drm/exynos/exynos_hdmi.c
index 5ed8b1e..28bf609 100644
--- a/drivers/gpu/drm/exynos/exynos_hdmi.c
+++ b/drivers/gpu/drm/exynos/exynos_hdmi.c
@@ -31,6 +31,7 @@
 #include <linux/pm_runtime.h>
 #include <linux/clk.h>
 #include <linux/gpio/consumer.h>
+#include <linux/hpd-notifier.h>
 #include <linux/regulator/consumer.h>
 #include <linux/io.h>
 #include <linux/of_address.h>
@@ -118,6 +119,7 @@ struct hdmi_context {
 	bool				dvi_mode;
 	struct delayed_work		hotplug_work;
 	struct drm_display_mode		current_mode;
+	struct hpd_notifier		*notifier;
 	const struct hdmi_driver_data	*drv_data;
 
 	void __iomem			*regs;
@@ -807,9 +809,12 @@ static enum drm_connector_status hdmi_detect(struct drm_connector *connector,
 {
 	struct hdmi_context *hdata = connector_to_hdmi(connector);
 
-	if (gpiod_get_value(hdata->hpd_gpio))
+	if (gpiod_get_value(hdata->hpd_gpio)) {
+		hpd_event_connect(hdata->notifier);
 		return connector_status_connected;
+	}
 
+	hpd_event_disconnect(hdata->notifier);
 	return connector_status_disconnected;
 }
 
@@ -848,6 +853,9 @@ static int hdmi_get_modes(struct drm_connector *connector)
 		edid->width_cm, edid->height_cm);
 
 	drm_mode_connector_update_edid_property(connector, edid);
+	hpd_event_connect(hdata->notifier);
+	hpd_event_new_edid(hdata->notifier, edid,
+			    EDID_LENGTH * (1 + edid->extensions));
 
 	ret = drm_add_edid_modes(connector, edid);
 
@@ -1483,6 +1491,7 @@ static void hdmi_disable(struct drm_encoder *encoder)
 	if (funcs && funcs->disable)
 		(*funcs->disable)(crtc);
 
+	hpd_event_disconnect(hdata->notifier);
 	cancel_delayed_work(&hdata->hotplug_work);
 
 	hdmiphy_disable(hdata);
@@ -1832,15 +1841,22 @@ static int hdmi_probe(struct platform_device *pdev)
 		}
 	}
 
+	hdata->notifier = hpd_notifier_get(&pdev->dev);
+	if (hdata->notifier == NULL) {
+		ret = -ENOMEM;
+		goto err_hdmiphy;
+	}
+
 	pm_runtime_enable(dev);
 
 	ret = component_add(&pdev->dev, &hdmi_component_ops);
 	if (ret)
-		goto err_disable_pm_runtime;
+		goto err_notifier_put;
 
 	return ret;
 
-err_disable_pm_runtime:
+err_notifier_put:
+	hpd_notifier_put(hdata->notifier);
 	pm_runtime_disable(dev);
 
 err_hdmiphy:
@@ -1859,9 +1875,11 @@ static int hdmi_remove(struct platform_device *pdev)
 	struct hdmi_context *hdata = platform_get_drvdata(pdev);
 
 	cancel_delayed_work_sync(&hdata->hotplug_work);
+	hpd_event_disconnect(hdata->notifier);
 
 	component_del(&pdev->dev, &hdmi_component_ops);
 
+	hpd_notifier_put(hdata->notifier);
 	pm_runtime_disable(&pdev->dev);
 
 	if (!IS_ERR(hdata->reg_hdmi_en))
-- 
2.8.1


  parent reply	other threads:[~2017-01-02 14:19 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-01-02 14:19 [PATCHv2 0/4] video/exynos/cec: add HPD state notifier & use in s5p-cec Hans Verkuil
2017-01-02 14:19 ` [PATCHv2 1/4] video: add hotplug detect notifier support Hans Verkuil
2017-01-03  7:50   ` Andrzej Hajda
2017-01-03  7:54     ` Hans Verkuil
2017-03-20 14:26   ` Russell King - ARM Linux
2017-03-20 14:27     ` Russell King - ARM Linux
2017-03-20 14:41       ` Hans Verkuil
2017-01-02 14:19 ` Hans Verkuil [this message]
2017-01-03  7:55   ` [PATCHv2 2/4] exynos_hdmi: add HPD " Andrzej Hajda
2017-01-03  8:25     ` Hans Verkuil
2017-01-02 14:19 ` [PATCHv2 3/4] cec: integrate " Hans Verkuil
2017-01-02 14:19 ` [PATCHv2 4/4] s5p-cec: add hpd-notifier support, move out of staging Hans Verkuil
2017-01-02 17:50   ` Krzysztof Kozlowski
2017-01-03  8:00   ` Andrzej Hajda
2017-01-03  8:11     ` Hans Verkuil
2017-01-04  8:44       ` Andrzej Hajda
2017-01-23 10:14         ` Hans Verkuil

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1483366747-34288-3-git-send-email-hverkuil@xs4all.nl \
    --to=hverkuil@xs4all.nl \
    --cc=benjamin.gaignard@linaro.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=hans.verkuil@cisco.com \
    --cc=inki.dae@samsung.com \
    --cc=javier@osg.samsung.com \
    --cc=krzk@kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=m.szyprowski@samsung.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).